Repetitive transcranial magnetic stimulation (rTMS) is a rapid and effective therapy for major depressive disorder; however, there is significant variability in therapeutic outcomes both within and across individuals, with approximately 50% of patients showing no response to rTMS treatment. Many studies have personalized the stimulation parameters of rTMS (e.g., location and intensity of stimulation) according to the anatomical and functional structure of the brain. In addition to these parameters, the internal states of the individual, such as circadian rhythm, behavior/cognition, neural oscillation, and neuroplasticity, also contribute to the variation in rTMS effects. In this review, we summarize the current literature on the interaction between rTMS and internal states. We propose two possible methods, multimodal treatment, and adaptive closed-loop treatment, to integrate patients' internal states to achieve better rTMS treatment for depression.
Humans ; Transcranial Magnetic Stimulation/methods* ; Depressive Disorder, Major/physiopathology* ; Neuronal Plasticity/physiology* ; Brain/physiopathology*

Objective To analyze the differences in oral hygiene and oral microbiota between the patients with schizophrenia and healthy individuals in Baoshan City.Methods 26 patients with schizophrenia from Baoshan Third People's Hospital were selected as the SCZ group and 26 healthy individuals matched by age and BMI as the HC(Healthy control)group.Demographic data,physical indicators,and oral conditions were collected.Saliva samples from 52 subjects were collected and 16S rDNA gene sequencing was used to compare the differences in oral hygiene and oral microbiota between the patients with schizophrenia and the healthy individuals.Results The difference in oral microbial community richness between the SCZ group and the HC group was statistically significant(P<0.05),with the SCZ group containing higher species than the HC group;at the genus level,except for Fusobacterium in the SCZ group and Actinomyces in the HC group,the top 5 dominant bacterial species in both groups were consistent;the results of species difference analysis showed that Fusobacterium and Campylobacter in the SCZ group were higher than those in the HC group(P<0.05).Conclusion The partial dominant bacterial species in the oral cavity of the patients with schizophrenia have changed to sulfate-reducing bacteria that produce hydrogen sulfide.Excessive production of hydrogen sulfide or polysulfide may damage the energy metabolism of mitochondria.

In the past decades, significant progress has been achived in cartilage regeneration. The traditional techniques for constructing tissue engineering cartilage scaffold mainly include pore agent method (or template method), phase separation method, gas foaming method, freeze-drying method, electrospinning method, etc. Cartilage is heterogeneous, and it is difficult for traditional scaffolds to simulate the high anisotropy of cartilage. Therefore, functional regeneration of cartilage is challenging. With the progress of three-dimensional(3D) printing technology, it is possible to prepare functional bionic scaffolds with fine structure and gradient changes through co-deposition of biomaterials, cells and active biomolecules, so as to achieve functional cartilage regeneration. This article reviewed 3D printing technology of cartilage tissue engineering, and the application of 3D printing technology in cartilage regeneration at different anatomical positions (articular cartilage, auricle cartilage, nasal cartilage). In addition, the importance of preparing bionic constructs with regional structure gradient and regional composition gradient was discussed. 3D bioprinting technology, 4D printing techniques, smart biomaterials brought hope for the construction of bionic tissues and organs.

In the past decades, significant progress has been achived in cartilage regeneration. The traditional techniques for constructing tissue engineering cartilage scaffold mainly include pore agent method (or template method), phase separation method, gas foaming method, freeze-drying method, electrospinning method, etc. Cartilage is heterogeneous, and it is difficult for traditional scaffolds to simulate the high anisotropy of cartilage. Therefore, functional regeneration of cartilage is challenging. With the progress of three-dimensional(3D) printing technology, it is possible to prepare functional bionic scaffolds with fine structure and gradient changes through co-deposition of biomaterials, cells and active biomolecules, so as to achieve functional cartilage regeneration. This article reviewed 3D printing technology of cartilage tissue engineering, and the application of 3D printing technology in cartilage regeneration at different anatomical positions (articular cartilage, auricle cartilage, nasal cartilage). In addition, the importance of preparing bionic constructs with regional structure gradient and regional composition gradient was discussed. 3D bioprinting technology, 4D printing techniques, smart biomaterials brought hope for the construction of bionic tissues and organs.

Objective:To investigate imaging characteristics of papulopustular rosacea (PPR) by high-frequency ultrasound combined with color Doppler flow imaging.Methods:From August 2021 to August 2022, 30 patients with PPR were enrolled from the Department of Dermatology, the First Affiliated Hospital of Baotou Medical College in the Inner Mongolia Autonomous Region, and 30 healthy volunteers served as controls. The 22-MHz high-frequency ultrasound combined with color Doppler blood flow imaging was performed to measure the skin thickness, echo and blood flow parameters at the cheek, and the ultrasound results were compared between the two groups. Comparisons between groups were conducted by using t test or chi-square test. The diagnostic value was analyzed using the area under the curve (AUC) in the receiver operating characteristic (ROC) curve. Results:In the case group, there were 12 males and 18 females, and their ages ranged from 22 to 65 years (42.3 ± 12.8 years) ; in the control group, there were 10 males and 20 females, and their ages ranged from 24 to 62 years (41.0 ± 8.4 years) . The epidermal and dermal thicknesses at the cheek were significantly higher in the case group (132.64 ± 12.29 μm, 1 812.29 ± 85.52 μm, respectively) than in the control group (104.34 ± 14.45 μm, 1 671.77 ± 146.55 μm, respectively, both P < 0.05) . High-frequency ultrasound images showed that the case group was mainly characterized by irregular hypoechoic areas in the cheek dermis (80%) , while banded moderately echoic areas were common in the cheek dermis in the control group (90%) ; subepidermal low-echogenic bands and dermal irregular hypoechoic areas were more likely to appear in the case group than in the control group (93.33% vs. 43.33%, 80% vs. 10%, respectively, both P < 0.001) . Compared with the control group, the case group showed a significantly increased proportion of patients with abundant blood flow signals (93.3% vs. 10%, P < 0.05) , and significantly increased blood vessel diameters (1.60 ± 0.42 mm vs. 0.95 ± 0.32 mm, P < 0.05) ; there was no significant difference in peak systolic blood flow velocity and vascular resistance index between the two groups (both P > 0.05) . The AUC of high-frequency ultrasound combined with color Doppler flow imaging quantitative parameters (including epidermal thicknesses, dermal thicknesses, and blood vessel diameters) was 0.989 (95% CI: 0.970 - 1.000) for the diagnosis of PPR, and the sensitivity and specificity were both 96.7%, which were higher than those of single parameter-based diagnostic model. Conclusion:High-frequency ultrasound combined with color Doppler flow imaging can help improve the accuracy of the diagnosis of PPR, by accurately and non-invasively measuring skin thickness and blood flow parameters.

In the past decades, great progress has been made in cartilage regeneration. The traditional techniques for constructing tissue engineering cartilage scaffold mainly include pore agent method (or template method ) , phase separation method, gas foaming method, freeze-drying method , electrospinning method, etc. Cartilage is heterogeneous, and it is difficult for traditional scaffolds to simulate the high anisotropy of cartilage. Therefore, functional regeneration of cartilage is challenging. With the progress of three-dimensional (3D) printing technology, it is possible to prepare functional bionic scaffolds with fine structure and gradient changes through co deposition of biomaterials, cells and active biomolecules, so as to achieve functional cartilage regeneration. This article reviews 3D printing technology of cartilage tissue engineering, and the application of 3D printing technology in cartilage regeneration at different anatomical positions (articular cartilage, auricle cartilage, nasal cartilage) . In addition, the importance of preparing bionic constructs with regional structure gradient and regional composition gradient was discussed. 3D bioprinting technology, 4 D printing techniques, smart biomaterials brought hope for the construction of bionic tissues and organs.

In the past decades, great progress has been made in cartilage regeneration. The traditional techniques for constructing tissue engineering cartilage scaffold mainly include pore agent method (or template method ) , phase separation method, gas foaming method, freeze-drying method , electrospinning method, etc. Cartilage is heterogeneous, and it is difficult for traditional scaffolds to simulate the high anisotropy of cartilage. Therefore, functional regeneration of cartilage is challenging. With the progress of three-dimensional (3D) printing technology, it is possible to prepare functional bionic scaffolds with fine structure and gradient changes through co deposition of biomaterials, cells and active biomolecules, so as to achieve functional cartilage regeneration. This article reviews 3D printing technology of cartilage tissue engineering, and the application of 3D printing technology in cartilage regeneration at different anatomical positions (articular cartilage, auricle cartilage, nasal cartilage) . In addition, the importance of preparing bionic constructs with regional structure gradient and regional composition gradient was discussed. 3D bioprinting technology, 4 D printing techniques, smart biomaterials brought hope for the construction of bionic tissues and organs.

Objective:To examine the burden of caregivers for elderly Parkinson's patients(PD)and to analyze the mediating effects of social support on primary PD caregivers' burden and their quality of life.Methods:In this cross-sectional study, 281 primary caregivers for elderly Parkinson's patients who visited the Department of Neurology's outpatient clinics of Qilu Hospital of Shandong University from January to May 2021 were surveyed via a convenience sampling method, with 242 valid questionnaires(86.1%). The Chinese versions of the Caregiver Burden Questionnaire, Social Support Rating Scale and 36-Item Short Form Health Survey were used for the investigation.Pearson correlation analysis was used to establish a structural equation model for the influence of social support in the burden and quality of life of caregivers for PD patients.The mediating effects were tested using Process v2.16.3 and re-tested using AMOS.The mediating effects were validated with Bootstrap.Results:Primary caregivers' scores on burden, social support and quality of life were(26.9±23.1), (40.5±8.7)and(593.7±163.3), respectively.Caregiver burden was negatively correlated with social support(r=-0.482, P<0.01), and social support was positively correlated with quality of life(r=0.513, P<0.01). Caregiver burden was negatively correlated with quality of life( r=-0.654, P<0.01), The validated mediating effects showed caregiver burden's direct effects on quality of life(95% CI: -0.38-0.61)and mediating effects of social support(95% CI: -0.08-0.21), not including 0, indicating that the care burden of primary caregivers for elderly PD patients was not only able to predict their quality of life, but also predict their quality of life through the mediating effects of social support(direct effect: -0.50 and mediating effect: -0.14, accounting for 78.0% and 22.0%, respectively, of the total effect of -0.64). Conclusions:Care burden and social support are important factors affecting the quality of life of primary caregivers for elderly PD patients.Reducing care burden can not only directly affect the quality of life, but also indirectly affect the quality of life by increasing social support.

Objective:To explore the current status of reporting outcomes by parents of preschool children with asthma and analyze its influencing factors.Methods:From October to December 2019, we selected parents of preschool children with asthma who came to the Respiratory Asthma Clinic of Children's Hospital Affiliated of Zhengzhou University. The General Information Questionnaire, Children Asthma Control Test (C-ACT) and Scale for Reporting Outcomes by Parents of Children with Asthma were used to investigate 382 children with asthma and their parents. Multiple linear regression was used to analyze the influencing factors of the reporting outcomes by parents of children with asthma. A total of 382 questionnaires were issued, and 376 valid questionnaires were returned with the effective response rate of 98.4%.Results:Among 376 children, scores of asthma control and reporting outcomes by parents of children with asthma were (21.95±3.54) and (97.20±18.38) respectively. The results of univariate analysis showed that there were statistically significant differences in the reporting outcomes by parents of children in terms of the relationship with the children, parents' education level, family residence and family monthly income ( P<0.05) . Multiple linear regression analysis showed that parental education level, monthly family income and asthma control level were the influencing factors of the reporting outcomes by parents of children with asthma ( P<0.05) . Conclusions:Outcomes reported by parents of preschool children with asthma are affected by education level, low family monthly income and asthma control level. Clinical medical and nursing staff should provide targeted and personalized interventions for children and their families in terms of home care, environment, diet and exercise, to help them manage their diseases and improve the level of asthma control in children.

The integrated curriculums of basic medicine in Shanxi Medical University are as follows: nine basic medical courses were integrated into 10 medical modules, with additional training including PBL and TBL case discussion, clinical clerkship, flipped classroom and other non-integrated subjects etc. In order to assess the interest of students for integrated curriculum, their intrinsic motivation, as well as their comprehension and application of medical knowledge, we gave anonymous questionnaire to 149 students, 16 teachers in basic medicine, and 10 teachers in clinical medicine. Results showed that more than 90% students were willing to take the integrated curriculum and participate in PBL and TBL case discussion, and students who were unwilling to take the curriculum were less than 10%, they thought that the knowledge of new curriculum system was incoherent. The proportion of students from higher grade who were unwilling to participate in the flipped classroom was increased from 6.7% to 95.0%. Most of the teachers both in basic and clinic medicine believed that new curriculum system was helpful for students to comprehend basic medical knowledge and strengthen their discriminating ability, but did not function in improving students' practical ability. In the further reform on teaching, details like the coherence of knowledge and the content selected when self-studying should be improved.