The rapid emergence of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) variants that evade immunity elicited by vaccination has posed a global challenge to the control of the coronavirus disease 2019 (COVID-19) pandemic. Therefore, developing countermeasures that broadly protect against SARS-CoV-2 and related sarbecoviruses is essential. Herein, we have developed a lipid nanoparticle (LNP)-encapsulated mRNA (mRNA-LNP) encoding the full-length Spike (S) glycoprotein of SARS-CoV-2 (termed RG001), which confers complete protection in a non-human primate model. Intramuscular immunization of two doses of RG001 in Rhesus monkey elicited robust neutralizing antibodies and cellular response against SARS-CoV-2 variants, resulting in significantly protected SARS-CoV-2-infected animals from acute lung lesions and complete inhibition of viral replication in all animals immunized with low or high doses of RG001. More importantly, the third dose of RG001 vaccination elicited effective neutralizing antibodies against current epidemic XBB and JN.1 strains and similar cellular response against SARS-CoV-2 Omicron variants (BA.1, XBB.1.16, and JN.1) were observed in immunized mice. All these results together strongly support the great potential of RG001 in preventing the infection of SARS-CoV-2 variants of concern (VOCs).

ObjectiveTo investigate the association between cumulative triglyceride （cumTG） exposure and the risk of acute pancreatitis （AP）. MethodsA prospective study was conducted for a cohort of 56 883 workers from Kailuan Group who participated in annual physical examination for three consecutive times in 2006-2010 （2006， 2008， and 2010） and had complete TG data without the medical history of AP. According to the quartiles of cumTG calculated， the subjects were divided into four groups （Q1， Q2， Q3， and Q4 groups）， and general information was compared between the two groups. A one-way analysis of variance was used for comparison of normally distributed continuous data between multiple groups， and the Kruskal-Wallis H test was used for comparison of continuous data with skewed distribution between multiple groups； the chi-square test was used for comparison of categorical data between groups. The Kaplan-Meier method was used to plot the survival curve and calculate the cumulative incidence rate of AP， and the Log-rank test was used for comparison between groups； the Cox regression model was used to analyze the effect of different cumTG levels on new-onset AP events. ResultsAfter follow-up for 10.51±1.76 years， there were 158 AP events in total， with a total incidence density of 2.64 per 10 000 person-years， and the number of cases and incidence density in the Q1， Q2， Q3， and Q4 groups were 29 cases （1.93 per 10 000 person-years）， 34 cases （2.27 per 10 000 person-years）， 30 cases （2.01 per 10 000 person-years）， and 65 cases （4.37 per 10 000 person-years）. The Log-rank test showed that there was a significant difference in cumulative incidence rate between groups （χ²=22.41， P<0.001）. The multivariate Cox regression analysis showed that compared with the Q1 group， the Q4 group had a significantly higher risk of AP （hazard ratio ［HR］=1.94， 95% confidence interval ［CI］： 1.20‍ ‍—‍ 3.13， P=0.01）. Compared with cumulative triglyceride exposure for 0 year， cumulative triglyceride exposure for 4 and 6 years significantly increased the risk of AP， with an HR value of 2.04 （95%CI： 1.26‍ ‍—‍ 3.30， P<0.01） and 3.20 （95%CI： 1.98‍ ‍—‍ 5.17， P<0.01）， respectively. After exclusion of the AP cases that occurred during the 2-year follow-up， the repeated multivariate Cox regression analysis showed that the Q4 group had an HR value of 1.96 （95%CI： 1.23‍ ‍—‍ 3.12， P<0.01） for the onset of AP， and after exclusion of the death cases during follow-up， the repeated multivariate Cox regression analysis showed that the Q4 group had an HR value of 1.85 （95%CI： 1.10‍ ‍—‍ 3.14， P<0.05） for the onset of AP. ConclusionThe incidence rate and risk of AP tend to increase with the increase in cumTG exposure.

BACKGROUND:At present,the use of a locking bone plate combined with steel wire or steel cable for the treatment of periprosthetic femoral fracture often adopts monocortical fixation,which is not stable and the proximal end of the bone cannot be achieved anatomically fitted by plate.The customized anatomical plate system can effectively solve this problem. OBJECTIVE:To explore the biomechanical strength of a customized anatomical plate system in fixation of Vancouver BI periprosthetic femoral fracture. METHODS:CT thin layer scanning data of normal femurs of 1 006 cases were selected and input into the MIMICS 21.0 software to establish the three-dimensional reconstruction model of the femur,which was set as the three-dimensional reconstruction group.56 complete human femoral specimens were selected as the femoral specimen group.The measured results of the two groups for femoral anatomical appearance were compared.If there was no significant difference between the two groups,the approximate appearance of a customized anatomical plate system was designed based on the measurement results in MIMICS 21.0 software and NX11.0 software.The customized anatomical plate system was designed and prepared according to the above measurement results.Eight pairs of frozen human femurs were selected to make Vancouver BI periprosthetic femoral fracture,which of the left were thin layer scanned by dual-source CT to obtain data.The data were transferred to determine the customized anatomical plate system model by the above design software.Eight sets of customized anatomical plate systems were ultimately produced,relying on the instrument company.The eight pairs of models were numbered 1-8.The left side was fixed with the customized anatomical plate system(customized anatomical plate system group);the right side was fixed with a metal locking plate system-large locking plate(claw plate group).L1-L4 and R1-R4 were subjected to vertical short-cycle loading test and vertical loading test.L5-L8 and R5-R8 were subjected to horizontal short-cycle loading test and four-point bending test.The vertical loading test and four-point bending test were used to collect bending load,bending displacement,and bending strain.Two short cycle loading tests were used to collect strain displacement to compare the maximum load,maximum displacement,bending stiffness,and short-period displacement resistance of the two kinds of bone plates. RESULTS AND CONCLUSION:(1)There were no significant differences in all indexes between the three-dimensional reconstruction group and the femoral specimen group(P>0.05).Individual customized anatomical plate system was designed based on the measurement results combined with digital software.(2)In the vertical loading test,the maximum load was higher(P=0.015),the maximum bending displacement was smaller(P=0.014),and the bending stiffness was higher(P=0.005)in the customized anatomical plate system group compared with the claw plate group.(3)In the four-point bending test,the maximum load was higher(P=0.023),the bending stiffness was higher(P=0.005),and the maximum bending displacement was not significant(P=0.216>0.05)in the customized anatomical plate system group compared with the claw plate group.(4)In the vertical short-cycle loading test,the average level of bending displacement in the customized anatomical plate system group(0.23±0.10 mm)was significantly lower than that in the claw plate group(0.44±0.02 mm)(P<0.05).(5)There was no significant difference in the average level of bending displacement between the two groups in the horizontal short cycle loading test(P>0.05).(6)It is concluded that the customized anatomical plate system has personalized anatomical characteristics,and the fixation of Vancouver BI periprosthetic femoral fracture is more stable,which has certain significance for clinical treatment.

Objective:To study and design one kind of flash radiotherapy(Flash-RT)equipment with ultra-high dose rate,which can be used in the mechanism research of Flash-RT with ultra-high dose rate.Methods:Based on the technique roadmap of high-power petal accelerator,the Flash-RT equipment can realize the requirement of Flash-RT for ultra-high dose rate and multiple irradiation angles.The corresponding design and research work were carried out on the basis of the overall design of the equipment,the main components and characteristics,the dynamics design of beam,the construction of movable and preliminary experimental platform,etc.Result:The dose rate of the designed equipment can reach to 100 Gy/s at a distance of 0.8 meters from the target point,which is easy to realize the radiotherapy method with multi angles.Conclusion:The designed X-ray equipment based on the technique roadmap of high-power petal accelerator can realize the research for the mechanism of medical Flash-RT equipment with ultra-high dose rate.

The protection effect of flash-radiotherapy(Flash-RT)with super-high dose on normal tissue has obtained wide attention in therapeutic radiology since it was found in 2014 year.The increasing research demand of Flash-RT with super-high dose-rate proposed new challenge for the existing radiotherapy equipment.Based on the demands of FLASH-RT research and clinical application,this review analyzed the proposed new requirement of Flash-RT for equipment,and introduce current scientific facilities with the experimental ability of X-ray FLASH-RT,as well as the situation of the specialized FLASH-RT equipment which were developing.The research of Flash-RT mechanism need the existing equipment with high-energy X-ray source develop toward high power,while the clinical application of Flash-RT demand these transient high-power devices should possess a series of radiotherapy techniques such as multi angle irradiation,conformal radiotherapy and others.Currently,China's X-ray FLASH-RT research is at the forefront of the world,which is expected to achieve the first breakthrough of high-end medical equipment in the X-ray Flash RT field.

Objective:To explore the clinical features of fatty liver disease (FLD) from non-alcoholic fatty liver disease (NAFLD) to metabolic dysfunction-associated fatty liver disease (MASLD), so as to elucidate its clinical application value under three renames.Methods:Patients who were hospitalized in the Department of Hepatology, Hospital of Traditional Chinese Medicine Affiliated to Xinjiang Medical University, from January 2020 to September 2023 and met the diagnosis of NAFLD, metabolic-associated fatty liver disease (MAFLD), or MASLD were selected as the research subjects. The clinical indicators differences among the three groups of patients were compared, mainly including general information (age, gender, body mass index, past history, etc.), serological indicators (liver and kidney function, blood lipids, blood sugar, coagulation function, etc.), non-invasive liver fibrosis indicators, fat attenuation parameters, etc. Measurement data were analyzed using ANOVA and the rank sum test, while count data were analyzed using the χ2 test. Results:NAFLD, MAFLD, and MASLD prevalence rates among 536 cases were 64.0%, 93.7%, and 100%, respectively. 318 cases (59.3%) met the three fatty liver names at the same time among them. Male population proportions in NAFLD, MAFLD, and MASLD were 30.9%, 55.8%, and 53.9%, respectively. The alcohol consumption history proportion was 0, 36.7%, and 36.0%, respectively. The smoking history proportion was 7.0%, 31.9%, and 30.6%, respectively. The body mass index was (27.66 ± 3.97), (28.33 ± 3.63), and (27.90 ± 3.89) kg/m 2, respectively. The γ-glutamyltransferase levels were 26.6 (18.0, 47.0) U/L, 31.0 (20.0, 53.0) U/L, and 30.8 (19.8, 30.8) U/L, respectively. The high-density lipoprotein cholesterol levels were 1.07 (0.90, 1.23) mmol/L, 1.02 (0.86, 1.19) mmol/L, and 1.03 (0.87,1.21) mmol/L, respectively. Sequentially measured uric acid was (322.98 ± 84.51) μmol/L, (346.57 ± 89.49) μmol/L, and (344.89 ±89.67) μmol/L, respectively. Sequentially measured creatinine was 69.6 (62.9, 79.0) μmol/L, 73.0 (65.0, 83.5) μmol/L, and 73.0 (65.0, 83.0) μmol/L, respectively. The sequential analysis of obesity proportion was 74.3%, 81.7%, and 76.5%, respectively, with statistically significant differences ( P<0.05). Conclusion:Compared with the NAFLD population, the MAFLD and MASLD populations were predominantly male, obese, and had a history of smoking and drinking. The levels of γ-glutamyltransferase, uric acid, and creatinine were slightly higher, while the levels of high-density lipoprotein cholesterol were lower. MASLD appeared in NAFLD and MAFLD on the basis of inheritance and progression, emphasizing once again the important role of metabolic factors in a fatty liver.

Objective To conduct a survey on students for their common needs for the course and the support to their research training,to provide reference for course reform and curriculum of ideology and politics.Methods A survey before and after course was conducted in 704 graduates who selected the course of"Experiments of Molecu-lar Biology"from the autumn of 2018 to the spring of 2024.After collecting the survey,they were summarized,counted,and analyzed.Results The students selected this course were mainly research-oriented graduate students.Their professional background was mainly in clinical medicine,and there was a relatively lack of training in tech-nology and laboratory skill in molecular biology experiment.The follow-up survey showed that experimental operation and implementation as well as analysis of experimental results were the two most helpful aspects for students;PCR,RNA extraction and detection,and Western blot were the most useful techniques for student learning and scientific research.Conclusions Through the survey,the professional background of students,dynamic changes in their course selection needs are well acknowledged and so thus able to optimize,provide good reference for teaching and learning in this field,and provide a basis for curriculum reform and construction of ideological and political courses.