OBJECTIVE:Repetitive transcranial magnetic stimulation and transcranial direct current stimulation have shown positive effects in improving gross motor function in children with cerebral palsy.A network meta-analysis was performed to analyze the clinical efficacy of repetitive transcranial magnetic stimulation and transcranial direct current stimulation on the improvement of lower limb motor function and gait in children with cerebral palsy.METHODS:Randomized controlled trials(RCT)about repetitive transcranial magnetic stimulation and transcranial direct current stimulation on lower limb motor function and gait in children with cerebral palsy were collected from CNKI,WanFang,VIP,SinoMed,PubMed,Web of Science,Medline.The search time limit was from the inception to October 5,2024.After screening literature,extracting data and evaluating the risk of bias of included studies,Stata 15.0 software was used for network meta-analysis,AND GRADE profiler was used for quality evaluation.RESULTS:A total of 19 studies were included,involving 4 treatment measures:conventional therapy,high-frequency repetitive transcranial magnetic stimulation,low-frequency repetitive transcranial magnetic stimulation and anodic transcranial direct current stimulation.The results of network meta-analysis showed that in terms of improving gross motor function,low-frequency repetitive transcranial magnetic stimulation[mean difference(MD)=9.48,95％confidence interval(CI)(6.61,12.34),P＜0.05]was the most effective.In terms of alleviating spasticity,high-frequency repetitive transcranial magnetic stimulation[MD=-0.63,95％CI(-1.72,0.45),P＜0.05]had the best efficacy.In terms of improving ankle joint range of motion and step speed,transcranial direct current stimulation[MD=2.27,95％CI(1.37,3.17),P＜0.05;MD=0.11,95％CI(0.05,0.17),P＜0.05]was the most effective.CONCLUSION:Existing clinical evidence suggests that low-frequency repetitive transcranial magnetic stimulation has the best therapeutic effect compared with other intervention measures in terms of improving lower limb gross motor function.In terms of reducing spasticity,high-frequency repetitive transcranial magnetic stimulation has a more significant effect.In terms of improving gait,transcranial direct current stimulation has more advantages.

OBJECTIVE:Repetitive transcranial magnetic stimulation and transcranial direct current stimulation have shown positive effects in improving gross motor function in children with cerebral palsy.A network meta-analysis was performed to analyze the clinical efficacy of repetitive transcranial magnetic stimulation and transcranial direct current stimulation on the improvement of lower limb motor function and gait in children with cerebral palsy.METHODS:Randomized controlled trials(RCT)about repetitive transcranial magnetic stimulation and transcranial direct current stimulation on lower limb motor function and gait in children with cerebral palsy were collected from CNKI,WanFang,VIP,SinoMed,PubMed,Web of Science,Medline.The search time limit was from the inception to October 5,2024.After screening literature,extracting data and evaluating the risk of bias of included studies,Stata 15.0 software was used for network meta-analysis,AND GRADE profiler was used for quality evaluation.RESULTS:A total of 19 studies were included,involving 4 treatment measures:conventional therapy,high-frequency repetitive transcranial magnetic stimulation,low-frequency repetitive transcranial magnetic stimulation and anodic transcranial direct current stimulation.The results of network meta-analysis showed that in terms of improving gross motor function,low-frequency repetitive transcranial magnetic stimulation[mean difference(MD)=9.48,95％confidence interval(CI)(6.61,12.34),P＜0.05]was the most effective.In terms of alleviating spasticity,high-frequency repetitive transcranial magnetic stimulation[MD=-0.63,95％CI(-1.72,0.45),P＜0.05]had the best efficacy.In terms of improving ankle joint range of motion and step speed,transcranial direct current stimulation[MD=2.27,95％CI(1.37,3.17),P＜0.05;MD=0.11,95％CI(0.05,0.17),P＜0.05]was the most effective.CONCLUSION:Existing clinical evidence suggests that low-frequency repetitive transcranial magnetic stimulation has the best therapeutic effect compared with other intervention measures in terms of improving lower limb gross motor function.In terms of reducing spasticity,high-frequency repetitive transcranial magnetic stimulation has a more significant effect.In terms of improving gait,transcranial direct current stimulation has more advantages.

Acute lung injury (ALI) has been a kind of acute and severe disease that is mainly characterized by systemic uncontrolled inflammatory response to the production of huge amounts of reactive oxygen species (ROS) in the lung tissue. Given the critical role of ROS in ALI, a Fe₃O₄ loaded bovine serum albumin (BSA) nanocluster (BF) was developed to act as a nanomedicine for the treatment of ALI. Combining with NIR irradiation, it exhibited excellent ROS scavenging capacity. Significantly, it also displayed the excellent antioxidant and anti-inflammatory functions for lipopolysaccharides (LPS) induced macrophages (RAW264.7), and Sprague Dawley rats via lowering intracellular ROS levels, reducing inflammatory factors expression levels, inducing macrophage M2 polarization, inhibiting NF-κB signaling pathway, increasing CD4⁺/CD8⁺ T cell ratios, as well as upregulating HSP70 and CD31 expression levels to reprogram redox homeostasis, reduce systemic inflammation, activate immunoregulation, and accelerate lung tissue repair, finally achieving the synergistic enhancement of ALI immunotherapy. It finally provides an effective therapeutic strategy of BF + NIR for the management of inflammation related diseases.

Image 1.

ObjectiveTo explore the effectiveness of health information dissemination and its influencing factors using the "Shanghai CDC" WeChat public account as a case study, providing references for public health institutions to optimize the use of official new media platforms for effective publicity. MethodsA total of 1 030 headline articles published on the "Shanghai CDC" WeChat public account between 2016 and 2019 were analyzed using content analysis and non-parametric tests to examine the impact of factors such as titles and content categories. ResultsFrom 2016 to 2019, the number of WeChat public account followers increased by 280 000, with the articles accumulating over 8.8 million views. The median (P₂₅, P₇₅) open rate of articles was 5.90% (3.69%, 10.31%), and the median (P₂₅, P₇₅) sharing and forwarding rate was 6.60% (4.25%, 9.17%). Factors such as the use of first- and second-person pronouns, degree adverbs, negative adverbs, explicit viewpoints, and title length all significantly affected the open rate of articles, with OR (95%CI) values of 0.175 (0.041‒0.756), 32.606 (2.350‒452.432), 4.079 (1.093‒15.230), 0.106 (0.028‒0.409), and 1.184 (1.063‒1.319),respectively (all P<0.05). In terms of content, statistical significant differences in dissemination effectiveness were observed across article categories and themes (P<0.05). In terms of article categories, articles related to news hotspots and service information had higher open rates of 9.58% and 14.00%, respectively. These two types of articles also obtained higher sharing and forwarding rates of 7.65% and 9.16%, respectively. In terms of article topics, compared with healthy life and health products, among the top four topics in terms of publication volume, the open rates of articles about infectious diseases and disease-causing biology and immunization programs were higher, accounting for 7.88% and 6.88%, respectively, with no significant difference in sharing and forwarding rates. ConclusionThe "Shanghai CDC" WeChat public account demonstrated good dissemination effectiveness. Enhancing article titles by increasing informational content and degree adverbs (e.g., "highly," "most," and "extremely") and negative adverbs (e.g., "no") can improve dissemination reach. Public health WeChat accounts should incorporate news hotspots or service information in their articles. While maintaining their strengths in disseminating knowledge on infectious diseases and immunization programs, they should also enhance public education in other professional fields within their scope of responsibility to improve the overall dissemination impact of health information.

[Objective] To conduct a retrospective statistical comparison of alanine aminotransferase (ALT) test values in blood donors prior to blood collection, aiming to analyze the objective characteristics of the population with elevated ALT levels (ALT>50 U/L) and provide reference data for adjusting the screening eligibility threshold for ALT. [Methods] The preliminary ALT screening data of 30 341 blood donor samples collected prior to blood donation from three smart blood donation sites at the Shenzhen Blood Center between 2022 and 2023 were extracted and compared with data from a health examination department of a tertiary hospital in Shenzhen (representing the general population, n=24 906). Both datasets were categorized and statistically described. A retrospective analysis was conducted to examine the associations between ALT test results and factors such as donors' gender, age, ethnicity, donation site, donation season, and frequency of blood donation. [Results] The ALT levels in both blood donors and the general population were non-normally distributed. The 95th percentile of ALT values was calculated as 61.4 U/L (male: 67.8 U/L, female: 39.3 U/L) for blood donors and 58.1 U/L (male: 63.7 U/L, female: 51.2 U/L) for the general population. The non-compliance rates (ALT>50 U/L) were 7.65% (2 321/30 341) in blood donors and 7.08% (1 763/24 906) in the general population. There were significant differences (P<0.05) in the ALT failure rate among blood donors based on gender, age, and donation site, but no significant differences (P>0.05) during the blood donation season. There was no statistically significant difference (P>0.05) in the positive rates of four serological markers (HBsAg, anti HCV, HIV Ag/Ab, anti TP) for blood screening pathogens between ALT unqualified and qualified individuals (2.05% vs 1.5%). If the ALT qualification threshold was raised from 50 U/L to 90 U/L, the non qualification rates of male and female blood donors would decrease from 9.82% (2 074/21 125) to 2.23% (471/21 125) and from 2.70% (249/9 216) to 0.75% (69/9 216), respectively. Among the 154 blood donors who donated blood more than 3 times, 88.31% of the 248 ALT test results were in the range of 50-90 U/L. Among them, 9 cases had ALT>130 U/L, and ALT was converted to qualified in subsequent blood donations. [Conclusion] There are differences in the ALT failure rate among blood donors of different genders and ages, and different blood donation sites and operators can also affect the ALT detection values of blood donors. The vast majority of blood donors with ALT failure are caused by transient and non pathological factors. With the widespread use of blood virus nucleic acid testing, appropriately increasing the ALT qualification threshold for blood donors can expand the qualified population and alleviate the shortage of blood sources, and the risk of blood safety will not increase.

Objective:To explore the clinical phenotype and variants of KIF4A gene associated with X-linked intellectual disability type 100 (XLID100) in a child by whole-exome sequencing (WES). Methods:A child presented at the Children′s Hospital Affiliated to Nanjing Medical University in September 2023 was selected as the study subject. Clinical data of the child was retrospectively analyzed. Peripheral blood samples were collected from the child and his family members for WES analysis. Candidate variant was verified by Sanger sequencing. Pathogenicity of the candidate variant was rated based on the guidelines from the American College of Medical Genetics and Genomics (ACMG). The variant was also searched in dbSNP, OMIM, HGMD, ClinVar and gnomAD databases. Amino acid sequences of the KIF4A protein across various species were retrieved from the Ensembl Genome Browser Database and analyzed using Clustal Omega software. Relevant literature on KIF4A gene mutations associated with XLID100 was reviewed. This study has been approved by the Medical Ethics Committee of the Hospital (Ethics No. 202402022-1). Results:The child, a 3-year-6-month-old male, had manifested intellectual impairment, language delay, autism, and choroid cyst revealed by cranial magnetic resonance imaging. No facial dysmorphism, tooth anomaly, gross motor development delay or regression, and history of seizure and febrile convulsion was noted. WES revealed that he has harbored a c. 3385delinsTATC (p.Thr1129delinsTyrPro) variant of the KIF4A gene. Sanger sequencing confirmed that his mother and sister have harbored the same variant, whilst his father was of the wild type. Both of his parents had a normal phenotype. The variant was classified as of uncertain significance based on the guidelines from the ACMG. It was not recorded by the dbSNP, OMIM, HGMD, ClinVar and the gnomAD database. Conservative analysis suggested that the variant site, which normally encodes a cysteine, is highly conserved among various species. A review of the literature had retrieved 6 relevant articles documenting a total of 27 cases of KIF4A gene mutations, with only one case from China. Conclusion:The c. 3385delinsTATC (p.Thr1129delinsTyrPro) variant of the KIF4A gene probably underlay the XLID100 in this child. Above finding has provided a reference for the clinical diagnosis and genetic counseling and enriched the mutation spectrum of the KIF4A gene.

Objective:To systematically review the progress in the method development and application of distributed learning in the estimation of epidemiological effect and provide methodological reference for multi-center studies.Methods:We conducted a literature retrieval for English papers published up to December 31, 2023 by using keywords of "health/medical big data" and "distributed/federated learning". After consulting experts, we set criteria of paper inclusion and exclusion and created a framework for data extraction. We collected information about basic study details, including method, application, and evaluation. Two researchers independently screened the papers and extracted information. We used EndNote 20 for the management of literatures and EpiData for the management of data.Results:A total of 3 444 papers were collected, and 29 papers were included in the final analysis. Most of the papers (25, 86.2%) were published in or after 2019, and the papers were mainly from the United States (21/29, 72.4%). For the estimation of epidemiological effects, 22 distributed learning methods had been developed, including methods for logistic regression (8), Cox regression (8), Poisson regression (2), and generalized linear mixed model (GLMM) (4), as well as three platforms for distributed analysis (VLP, Vantage6, AusCAT). The 29 papers described 45 applications, with 20 (44.4%) focusing on the establishment of prediction model and 25 (55.6%) on association analysis. Importantly, except for GLMM, current distributed learning methods can estimate effects with little bias in 1-3 rounds of communication. These methods show less bias compared with meta-analysis, especially in the address of data heterogeneity and rare outcomes. However, less studies examined how differences in data structure and sparse data affect results, an area that requires further research.Conclusion:While distributed learning shows promise in epidemiological effect estimation, it is still in early development, requiring further research on data heterogeneity handling and communication efficiency improvement.

As the core force in medical services,healthcare professionals are key stakeholders in implementing the Healthy China strategy,strengthening public health awareness,and improving national health literacy.They must actively shoul-der the social responsibility of science communication.In the face of the rising mortality rate of coronary heart disease(CHD),they are obligated to scientifically disseminate relevant health knowledge to the public.This article takes the Fifth Internal Medi-cine Party Branch of the Second Clinical General Party Branch at Guangdong Provincial Hospital of Traditional Chinese Medicine(Dade Road Main Campus)as a typical case to explore how Party building can create the"Heart-Shaping"science popularization brand for CHD.The Party branch plays a leading and exemplary role by organizing resources and uniting Party members.Through cross-media integration,innovative content formats,and other methods,it fosters a strong atmosphere of science popularization under Party leadership,encouraging medical staff to break away from tradition and pioneer a diversified model of CHD science communication,successfully establishing the"Heart-Shaping"brand.Additionally,it meticulously cultivates a professional sci-ence communication team,achieving synergistic progress in both Party building and CHD science popularization.This provides replicable and practical innovative experience for Party building-driven CHD science communication,highlighting the unique ad-vantages of Party building in enhancing the effectiveness of CHD science popularization and promoting the integration of Party work and professional services.

OBJECTIVES: This study aims to use 3D prin-ting technology based on the principle of stereo lithography apparatus (SLA) to shape dental lithium disilicate ceramics and study the effects of different slurry proportions on the microstructure and properties of heat-treated samples. METHODS: The experimental group comprised lithium disilicate ceramics manufactured through SLA 3D printing, and the control group comprised lithium disilicate ceramics (IPS e.max CAD) fabricated through commercial milling. An array of different particle sizes of lithium disilicate ceramic powder materials (nano and micron) was selected for mixing with photocurable acrylate resin. The proportion of experimental raw materials was adjusted to prepare five groups of ceramic slurries for 3D printing (Groups S1-S5) on the basis of rheological properties, stability, and other factors. Printing, debonding, and sintering were conducted on the experimental group with the optimal ratio, followed by measurements of microstructure, crystallographic information, shrinkage, and mechanical properties. RESULTS: Five groups of lithium disilicate ceramic slurries were prepared, of which two groups with high solid content (75%) (Groups S2 and S3) were selected for 3D printing. X-ray diffraction and scanning electron microscopy results showed that lithium disilicate was the main crystalline phase in Groups S2 and S3, and its microstructure was slender, uniform, and compact. The average grain sizes of Groups S2 and S3 were (559.79±84.58) nm and (388.26±61.49) nm, respectively (P<0.05). Energy spectroscopy revealed that the samples in the two groups contained a high proportion of Si and O elements. After heat treatment, the shrinkage rate of the two groups of ceramic samples was 18.00%-20.71%. Test results revealed no statistical difference in all mechanical properties between Groups S2 and S3 (P>0.05). The flexural strengths of Groups S2 and S3 were (231.79±21.71) MPa and (214.86±46.64) MPa, respectively, which were lower than that of the IPS e.max CAD group (P<0.05). The elasticity modulus of Groups S2 and S3 were (87.40±12.99) GPa and (92.87±19.76) GPa, respectively, which did not significantly differ from that of the IPS e.max CAD group (P>0.05). The Vickers hardness values of Groups S2 and S3 were (6.53±0.19) GPa and (6.25±0.12) GPa, respectively, which were higher than that of the IPS e.max CAD group (P<0.05). The fracture toughness values of Groups S2 and S3 were (1.57±0.28) MPa·m^0.5 and (1.38±0.17) MPa·m^0.5, respectively, which did not significantly differ from that of the IPS e.max CAD group (P>0.05). CONCLUSIONS The combination of lithium disilicate ceramic powders with different particle sizes can yield a slurry with high solid content (75%) and suitable viscosity and stability. The dental lithium disilicate ceramic material is successfully prepared by using 3D printing technology. The 3D-printed samples show a small shrinkage rate after heat treatment. Their microstructure conforms to the crystal phase of lithium disilicate ceramics, and their mechanical properties are close to those of milled lithium disilicate ceramics.
Printing, Three-Dimensional ; Dental Porcelain/chemistry* ; Ceramics/chemistry* ; Materials Testing ; Particle Size