Turning to critical illness is a common stage of various diseases and injuries before death. Patients usually have complex health conditions, while the treatment process involves a wide range of content, along with high requirements for doctor′s professionalism and multi-specialty teamwork, as well as a great demand for time-sensitive treatments. However, this is not matched with critical care professionals and the current state of medical care in China. Telemedicine, which shortens the distance of medical professionals and the gap of disease diagnosis and treatments in various regions through electronic information, can effectively solve the current problem. Therefore, there is an urgent need to develop a standardized, high-quality visualization telemedicine round system .Therefore, experts have been organized to search domestic and foreign literature on telemedicine round for critically ill patients and to form this consensus based on clinical experiences so as to further improve the level of critical care treatments in regions.

For middle-aged and elderly patients with conditions such as spinal fractures and degenerative spinal diseases, spinal internal fixation is a core surgical procedure for reconstructing spinal stability, heavily relying on the biomechanical stability provided by pedicle screw systems. Whereas, these patients are often complicated by osteoporosis that can significantly compromise the stability of the bone-pedicle screw interface, leading to a marked increase in pedicle screw loosening and surgical failure rates. The bone cement-augmented pedicle screw technique, which involves injecting bone cement into the vertebral body or screw trajectory to optimize the mechanical properties of the bone-pedicle screw composite, has been proven to significantly enhance fixation strength and effectively prevent screw-related failures, thereby reducing the incidence of internal fixation failure in high-risk populations undergoing spinal fusion. However, the widespread clinical application of this technique has faced challenges such as inaccurate clinical decision-making (indication and contraindication selection), non-standardized operative practices, and insufficient awareness of complication prevention, resulting in considerable variability in clinical outcomes and even severe complications. To address this, Prof. Luo Fei from First Affiliated Hospital of Army Medical University initiated the project and the Chinese Association Orthopaedic Surgeons organized relevant experts to develop the Evidence-based clinical practice guideline for bone cement-augmented pedicle screw technique ( version 2025), based on current evidence. The guidelines put forward 8 recommendations regarding the clinical value, scope of application, and operational standards of the technique, aiming to provide evidence-based medical support and technical standardization for clinical decision-making.

Objective To explore the effect of transcutaneous auricular vagus nerve stimulation(taVNS)combined with dual-task training(DTT)on upper limb function recovery in patients with ischemic stroke.Methods From January to October,2024,60 ischemic stroke patients with upper limb dysfunction admitted to Zhejiang Rehabilitation Medical Center were selected and randomly divided into control group(n=30)and observation group(n=30).Both groups received conventional rehabilitation training.The control group underwent sham-taVNS combined with DTT,while the observation group received active taVNS combined with DTT,for four weeks.Before and after treatment,they were assessed with Fugl-Meyer Assessment-Upper Extremities(FMA-UE),Action Research Arm Test(ARAT),modified Barthel Index(MBI)and motor-evoked potential(MEP)tests.Results The FMA-UE scores,ARAT scores,MBI scores,MEP amplitude and MEP latency improved in both groups af-ter treatment(|t|>3.670,P<0.01),and were superior in the observation group than in the control group(|t|>3.081,P<0.01).Conclusion The combination of taVNS and DTT can significantly improve upper limb function,enhance activities of daily living,and promote neurological recovery in patients with ischemic stroke.

Objective:To evaluate the efficacy of 3D printing technology combined with computer navigation-assisted screw implantation in the treatment of atlantoaxial instability (AAI) complicated by vertebral artery anomalies.Methods:A retrospective case series study was conducted to analyze the clinical data of 23 patients with AAI complicated by vertebral artery anomalies who were admitted to Honghui Hospital of Xi′an Jiaotong University between January 2019 and January 2023, including 10 males and 13 females, aged 19-70 years [(51.0±13.3)years]. Vertebral artery anomalies were categorized into unilateral high-riding vertebral artery with unilateral dominance ( n=14), bilateral high-riding vertebral arteries with unilateral dominance ( n=6), and ponticulus posticus ( n=3). All the patients underwent preoperative planning using a 3D-printed model of the atlantoaxial complex with the vertebral artery, followed by posterior atlantoaxial pedicle screw fixation with computer-assisted navigation. Operative duration and intraoperative blood loss were recorded. The accuracy of pedicle screw placement was assessed at 3 days postoperatively using the Gertzbein-Robbins classification. Visual analogue scale (VAS) scores and Japanese Orthopedic Association (JOA) scores were evaluated preoperatively, at 3 days, 3 months postoperatively, and at the last follow-up. Bony fusion was assessed using cervical CT with 3D reconstruction at the last follow-up. Complications were also observed. Results:All the patients were followed up for 12-19 months [(15.1±1.9)months]. The operative duration was 125-167 minutes [(140.6±10.9)minutes] and intraoperative blood loss was 200-600 ml [(295.7±77.8)ml]. At 3 days postoperatively, all the 66 pedicle screws were safely placed, with 60 screws (91%) rated as Gertzbein-Robbins Grade 0 and 6 screws (9%) as Grade 1. At 3 days and 3 months postoperatively, and at the last follow-up, the VAS scores were (4.0±1.0)points, (2.0±0.6)points, and (1.3±0.5)points, and the JOA scores were (14.2±1.2)points, (16.0±0.8)points, and (16.6±0.5)points, both of which were not only significantly improved compared with preoperative (5.6±1.3)points and (12.8±1.5)points, but also further improved over time ( P<0.05). At the last follow-up, 22 patients (96%) achieved satisfactory atlantoaxial bony fusion. No vertebral artery injury, spinal cord or nerve injury, cerebrospinal fluid leakage, or screw loosening were observed in any patients. Conclusion:For patients with AAI complicated by vertebral artery anomalies, 3D printing combined with computer navigation-assisted navigation for atlantoaxial pedicle screw implantation offers multiple advantages, including minimal surgical trauma, high screw placement accuracy, pain relief, neurological function improvement, high fusion rate, and lowered incidence of complications.

For middle-aged and elderly patients with conditions such as spinal fractures and degenerative spinal diseases, spinal internal fixation is a core surgical procedure for reconstructing spinal stability, heavily relying on the biomechanical stability provided by pedicle screw systems. Whereas, these patients are often complicated by osteoporosis that can significantly compromise the stability of the bone-pedicle screw interface, leading to a marked increase in pedicle screw loosening and surgical failure rates. The bone cement-augmented pedicle screw technique, which involves injecting bone cement into the vertebral body or screw trajectory to optimize the mechanical properties of the bone-pedicle screw composite, has been proven to significantly enhance fixation strength and effectively prevent screw-related failures, thereby reducing the incidence of internal fixation failure in high-risk populations undergoing spinal fusion. However, the widespread clinical application of this technique has faced challenges such as inaccurate clinical decision-making (indication and contraindication selection), non-standardized operative practices, and insufficient awareness of complication prevention, resulting in considerable variability in clinical outcomes and even severe complications. To address this, Prof. Luo Fei from First Affiliated Hospital of Army Medical University initiated the project and the Chinese Association Orthopaedic Surgeons organized relevant experts to develop the Evidence-based clinical practice guideline for bone cement-augmented pedicle screw technique ( version 2025), based on current evidence. The guidelines put forward 8 recommendations regarding the clinical value, scope of application, and operational standards of the technique, aiming to provide evidence-based medical support and technical standardization for clinical decision-making.

Objective To explore the effect of transcutaneous auricular vagus nerve stimulation(taVNS)combined with dual-task training(DTT)on upper limb function recovery in patients with ischemic stroke.Methods From January to October,2024,60 ischemic stroke patients with upper limb dysfunction admitted to Zhejiang Rehabilitation Medical Center were selected and randomly divided into control group(n=30)and observation group(n=30).Both groups received conventional rehabilitation training.The control group underwent sham-taVNS combined with DTT,while the observation group received active taVNS combined with DTT,for four weeks.Before and after treatment,they were assessed with Fugl-Meyer Assessment-Upper Extremities(FMA-UE),Action Research Arm Test(ARAT),modified Barthel Index(MBI)and motor-evoked potential(MEP)tests.Results The FMA-UE scores,ARAT scores,MBI scores,MEP amplitude and MEP latency improved in both groups af-ter treatment(|t|>3.670,P<0.01),and were superior in the observation group than in the control group(|t|>3.081,P<0.01).Conclusion The combination of taVNS and DTT can significantly improve upper limb function,enhance activities of daily living,and promote neurological recovery in patients with ischemic stroke.

Objective:To evaluate the efficacy of 3D printing technology combined with computer navigation-assisted screw implantation in the treatment of atlantoaxial instability (AAI) complicated by vertebral artery anomalies.Methods:A retrospective case series study was conducted to analyze the clinical data of 23 patients with AAI complicated by vertebral artery anomalies who were admitted to Honghui Hospital of Xi′an Jiaotong University between January 2019 and January 2023, including 10 males and 13 females, aged 19-70 years [(51.0±13.3)years]. Vertebral artery anomalies were categorized into unilateral high-riding vertebral artery with unilateral dominance ( n=14), bilateral high-riding vertebral arteries with unilateral dominance ( n=6), and ponticulus posticus ( n=3). All the patients underwent preoperative planning using a 3D-printed model of the atlantoaxial complex with the vertebral artery, followed by posterior atlantoaxial pedicle screw fixation with computer-assisted navigation. Operative duration and intraoperative blood loss were recorded. The accuracy of pedicle screw placement was assessed at 3 days postoperatively using the Gertzbein-Robbins classification. Visual analogue scale (VAS) scores and Japanese Orthopedic Association (JOA) scores were evaluated preoperatively, at 3 days, 3 months postoperatively, and at the last follow-up. Bony fusion was assessed using cervical CT with 3D reconstruction at the last follow-up. Complications were also observed. Results:All the patients were followed up for 12-19 months [(15.1±1.9)months]. The operative duration was 125-167 minutes [(140.6±10.9)minutes] and intraoperative blood loss was 200-600 ml [(295.7±77.8)ml]. At 3 days postoperatively, all the 66 pedicle screws were safely placed, with 60 screws (91%) rated as Gertzbein-Robbins Grade 0 and 6 screws (9%) as Grade 1. At 3 days and 3 months postoperatively, and at the last follow-up, the VAS scores were (4.0±1.0)points, (2.0±0.6)points, and (1.3±0.5)points, and the JOA scores were (14.2±1.2)points, (16.0±0.8)points, and (16.6±0.5)points, both of which were not only significantly improved compared with preoperative (5.6±1.3)points and (12.8±1.5)points, but also further improved over time ( P<0.05). At the last follow-up, 22 patients (96%) achieved satisfactory atlantoaxial bony fusion. No vertebral artery injury, spinal cord or nerve injury, cerebrospinal fluid leakage, or screw loosening were observed in any patients. Conclusion:For patients with AAI complicated by vertebral artery anomalies, 3D printing combined with computer navigation-assisted navigation for atlantoaxial pedicle screw implantation offers multiple advantages, including minimal surgical trauma, high screw placement accuracy, pain relief, neurological function improvement, high fusion rate, and lowered incidence of complications.

Turning to critical illness is a common stage of various diseases and injuries before death. Patients usually have complex health conditions, while the treatment process involves a wide range of content, along with high requirements for doctor′s professionalism and multi-specialty teamwork, as well as a great demand for time-sensitive treatments. However, this is not matched with critical care professionals and the current state of medical care in China. Telemedicine, which shortens the distance of medical professionals and the gap of disease diagnosis and treatments in various regions through electronic information, can effectively solve the current problem. Therefore, there is an urgent need to develop a standardized, high-quality visualization telemedicine round system .Therefore, experts have been organized to search domestic and foreign literature on telemedicine round for critically ill patients and to form this consensus based on clinical experiences so as to further improve the level of critical care treatments in regions.