BACKGROUND:One of the advantages of clear aligner treatment is molar distalization.However,tooth tilting movement and loss of anterior anchorage may occur during treatment.There are few studies on whether these problems can be improved by selecting clear aligners with different thicknesses and edges to improve the clinical treatment effect.OBJECTIVE:To analyze the control ability of clear aligners with different thickness and edges on the central incisor,lateral incisor,and second molar when pushing the maxillary second molar distally by three-dimensional finite element analysis.METHODS:Three-dimensional finite element analysis models of bilateral maxillary second molar distalization with clear aligner,maxillary dentition,periodontal ligament,and alveolar bone with different thicknesses and margins were established by Mimics,Geomagic Wrap,3-matic and SolidWorks software,respectively.There were 16 combinations of four thicknesses(0.4,0.5,0.625,and 0.75 mm)and four margins(scallop,straight,straight extension 2 mm and straight extension 4 mm).The data were imported into Ansys Workbench software for design and solution.The mean value,peak value and distribution of the periodontal ligament equivalent stress of the second molar,the equivalent stress and the maximum initial displacement of the second molar,and the control ability of each appliance on the second molar,central incisor,and lateral incisor were analyzed.RESULTS AND CONCLUSION:(1)The mean equivalent stress of periodontal ligament of the second molar,the equivalent stress of the second molar and the maximum initial displacement of the second molar increased with the extension of the appliance edge and the increase of the thickness of the appliance in the 16 groups of models.(2)When the thickness of appliances was the same,the maximum equivalent stress of the second molar in the linear appliance group was the highest,and the maximum equivalent stress of the second molar in the linear extended appliance group was greater than that in the scallop appliance group.When the edge of the appliance was the same,the periodontal ligament equivalent stress peak of the second molar increased with the increase of the thickness of the appliance.The equivalent stress distribution in the periodontal ligament of the second molar in the linear extendable appliance group was more uniform than that in the scallop appliance group and the linear appliance group.(3)When the thickness of the appliance was the same,the scallop-shaped appliance had the worst control on the second molar.When the edge of the appliance was the same,with the increase of the thickness of the appliance,the control of the second molar by the linear extender appliance was gradually stronger than that by the linear appliance.The control of the central incisor was stronger and more stable with the linear extended 2 mm appliance,while the control of the lateral incisor was stronger and more stable with the linear appliance.(4)The results showed that when using clear aligners to push molars distally,extending the edge of the appliance could improve the control of the molars and reduce the tilting movement of the teeth.The design of a straight extension margin of 2 mm for the central incisor and a straight edge for the lateral incisor can enhance the control of the anchorage incisor and reduce the labial inclination of the anterior teeth.

BACKGROUND:One of the advantages of clear aligner treatment is molar distalization.However,tooth tilting movement and loss of anterior anchorage may occur during treatment.There are few studies on whether these problems can be improved by selecting clear aligners with different thicknesses and edges to improve the clinical treatment effect.OBJECTIVE:To analyze the control ability of clear aligners with different thickness and edges on the central incisor,lateral incisor,and second molar when pushing the maxillary second molar distally by three-dimensional finite element analysis.METHODS:Three-dimensional finite element analysis models of bilateral maxillary second molar distalization with clear aligner,maxillary dentition,periodontal ligament,and alveolar bone with different thicknesses and margins were established by Mimics,Geomagic Wrap,3-matic and SolidWorks software,respectively.There were 16 combinations of four thicknesses(0.4,0.5,0.625,and 0.75 mm)and four margins(scallop,straight,straight extension 2 mm and straight extension 4 mm).The data were imported into Ansys Workbench software for design and solution.The mean value,peak value and distribution of the periodontal ligament equivalent stress of the second molar,the equivalent stress and the maximum initial displacement of the second molar,and the control ability of each appliance on the second molar,central incisor,and lateral incisor were analyzed.RESULTS AND CONCLUSION:(1)The mean equivalent stress of periodontal ligament of the second molar,the equivalent stress of the second molar and the maximum initial displacement of the second molar increased with the extension of the appliance edge and the increase of the thickness of the appliance in the 16 groups of models.(2)When the thickness of appliances was the same,the maximum equivalent stress of the second molar in the linear appliance group was the highest,and the maximum equivalent stress of the second molar in the linear extended appliance group was greater than that in the scallop appliance group.When the edge of the appliance was the same,the periodontal ligament equivalent stress peak of the second molar increased with the increase of the thickness of the appliance.The equivalent stress distribution in the periodontal ligament of the second molar in the linear extendable appliance group was more uniform than that in the scallop appliance group and the linear appliance group.(3)When the thickness of the appliance was the same,the scallop-shaped appliance had the worst control on the second molar.When the edge of the appliance was the same,with the increase of the thickness of the appliance,the control of the second molar by the linear extender appliance was gradually stronger than that by the linear appliance.The control of the central incisor was stronger and more stable with the linear extended 2 mm appliance,while the control of the lateral incisor was stronger and more stable with the linear appliance.(4)The results showed that when using clear aligners to push molars distally,extending the edge of the appliance could improve the control of the molars and reduce the tilting movement of the teeth.The design of a straight extension margin of 2 mm for the central incisor and a straight edge for the lateral incisor can enhance the control of the anchorage incisor and reduce the labial inclination of the anterior teeth.

Objective To observe the improvement effect and mechanism of emodin on lipopolysaccharide(LPS)-induced podocyte injury.Methods Human glomerular podocytes were used as the study object,and they were randomly divided into the blank control group,the LPS group,the emodin low-,medium-,and high-dose groups,and the emodin+lysophosphatidic acid[LP A,RhoA/RhoRho-associatedcoiled-coil kinase(ROCK)activator]group.Cell counting kit 8(CCK8)and 5-ethynyl-2'-deoxyuridine(EdU)staining were applied to detect the proliferation of glomerular podocytes,Transwell assay was used to test the migration of glomerular podocytes,flow cytometry was used to detect apoptosis of glomerular podocytes,and enzyme-linked immunosorbent assay(ELISA)was used to detect the levels of inflammatory factors tumor necrosis factor α(TNF-α),interleukin(IL)-1β,and IL-18 in the supernatant of glomerular podocytes,and the protein expression levels of RhoA and ROCK in glomerular podocytes were determined by Western Blot.Results The optical density(OD)450nm,EdU positive cell rate and migration number of glomerular podocytes in the LPS group were lower than those in the blank control group,and the apoptosis rate,the levels of TNF-α,IL-1β and IL-18 in the supernatant,as well as the protein expression levels of RhoA and ROCK in the cells were higher than those in the blank control group,the differences being statistically significant(P＜0.05);the OD450nm,EdU positive cell rate and migration number of glomerular podocytes in the emodin low-,medium-,and high-dose groups were higher than those in the LPS group,while the apoptosis rate,levels of TNF-α,IL-1 β and IL-18 in supernatant,as well as RhoA and ROCK protein expression levels in cells were reduced compared with those in the LPS group,the differences being statistically significant(P＜0.05);the OD450nm and EdU positive cell rate and migration number of glomerular podocytes in LPA group were lower than those of emodin high-dose group,while the apoptosis rate,levels of TNF-α,IL-1 βand IL-18 in supernatant,as well as RhoA and ROCK protein expression levels in cells were higher than those of emodin high-dose group,the differences being all statistically significant(P＜0.05).Conclusion Emodin can improve LPS-induced podocyte injury,and its mechanism of action may be related to the inhibition of RhoA/ROCK signaling pathway.

Objective To analyze the expression levels of miR-27a-3p mRNA and Yes-associated protein 1(YAP1)mRNA in breast cancer,and to explore their relationships with clinicopathological features and the survival prognosis of patients.Methods A total of 130 breast cancer patients who underwent mastectomy in our hospital between January 2019 and January 2021 were enrolled.The expression levels of miR-27a-3p and YAP1 mRNA in breast tumor tissues and adjacent normal breast tissues were assessed by qRT-PCR.Furthermore,the relationships between their expression and clinicopathological features,as well as the survival prognosis of patients,were investigated.Results Compared with adjacent normal breast tissues,the expression of miR-27a-3p mRNA in breast tumor tissues was lower(P＜0.05),while that of YAP1 mRNA was higher(P＜0.05).A negative correlation was observed between the expression of miR-27a-3p mRNA and YAP1 mRNA in breast tumor tissues(r=-0.456,P＜0.05).The expression of miR-27a-3p mRNA was correlated with tumor diameter,histological grade,tumor staging by the TNM system,lymph node metastasis,and vascular invasion in patients with breast cancer(P＜0.05).The YAP1 mRNA expression was correlated with histological grade,tumor staging by the TNM system,lymph node metastasis,and vascular invasion(P＜0.05).Kaplan-Meier survival analysis revealed that the 3-year overall survival rate of the miR-27a-3p low-expression group was 71.60％(48/67),which was lower than the 91.50％(54/59)of the miR-27a-3p high-expression group(log-rank x2=8.211,P=0.004).The 3-year overall survival rate of the YAP1 high-expression group was 73.80％(45/61),lower than that of the YAP1 low-expression group(87.70％,57/65)(log-rank x2=4.429,P=0.035).Multivariate regression analysis indicated that lymph node metastasis(hazard ratio[HR]=1.409;95％CI,1.057-1.644;P=0.046),vascular invasion(HR=1.541;95％CI,1.076-1.869;P=0.045),low miR-27a-3p mRNA expression(HR=0.593;95％CI,0.388-0.925;P=0.018),and high YAP1 mRNA expression(HR=0.628;95％CI,0.405-0.912;P=0.022)were relevant factors affecting the 3-year overall survival of patients with breast cancer.Conclusion A significant downregulation of miR-27a-3p mRNA and upregulation of YAP1 mRNA are observed in breast tumor tissues.The low expression of miR-27a-3p mRNA and the high expression of YAP1 mRNA are associated with adverse clinicopathological features and poor survival prognosis,and are risk factors affecting the 3-year overall survival of patients with breast cancer.They show promise as new potential therapeutic targets for breast cancer.

Cervical spinal cord injury without fracture-dislocation (CSCIWFD) is referred to as a special type of cervical spinal cord injury characterized by traumatic spinal cord dysfunction and no significant bony structural abnormalities on imagines. Duo to the high risk of missed diagnosis during the initial consultation, CSCIWFD may lead to progressive neurological deterioration or even complete paralysis, severely impacting patients′ prognosis. Currently, there are no established consensuses over the diagnosis and treatment of CSCIWFD, such as the lack of evidence-based standards for indications of non-surgical treatment and risk of secondary neurological injury, as well as debates over the optimal timing for surgical intervention and indications for different surgical approaches. To address these issues, the Spine Trauma Group of the Orthopedic Branch of the Chinese Medical Doctor Association organized experts in the relevant fields to formulate Diagnosis and treatment guideline for acute cervical spinal cord injury without fracture- dislocation in adults ( version 2025) . Based on evidence-based medicine and the principles of scientific rigor and clinical applicability, the guidelines proposed 11 recommendations covering terminology, diagnosis, evaluation treatment, and rehabilitation, etc., aiming to standardize the management of CSCIWFD.

Vertebral refracture following percutaneous vertebral augmentation (PVA) is commonly seen in elderly patients with osteoporotic thoracolumbar compression fractures (OTLCF). It can lead to recurrent pain, loss of vertebral height, progression of kyphosis, and even neurological dysfunction, significantly impairing patients′ quality of life. Current diagnosis and treatment face multiple challenges, including high misdiagnosis rate, difficulty in choosing between surgical and non-surgical treatment options, lack of standardized surgical protocols, interference from intralesional bone cement during procedures, inadequate stability of internal fixation in osteoporotic bone, and suboptimal compliance of anti-osteoporotic therapy. Establishing a standardized diagnostic and therapeutic framework is urgently needed. To standardize the management process and improve outcomes for vertebral refractures after PVA in elderly OTLCF patients, Spinal Trauma Group of the Orthopedic Branch of Chinese Medical Doctor Association organized experts in the field to develop Guideline for the diagnosis and treatment of vertebral refracture after percutaneous vertebral augmentation in elderly patients with osteoporotic thoracolumbar compression fractures ( version 2025), based on current literature and clinical experience, and adhering to principles of scientific rigor and clinical applicability. A total of 11 recommendations were proposed, encompassing diagnosis, treatment, and rehabilitation of vertebral refracture after PVA in elderly patients with OTLCF, aiming to provide a foundation for a standardized management.

Thoracolumbar spine fracture often leads to severe pain, functional impairments, and neurological deficits, for which open reduction and internal fixation can effectively restore the spinal structural stability. Open decompression and reduction with internal fixation can help relieve spinal cord compression and improve spinal function in cases of concomitant cord injury. Although spinal stability can be restored through surgery, patients often face chronic pain and functional impairments postoperatively. A postoperative rehabilitation program is critical in optimizing therapeutic outcomes, reducing complications, and minimizing the risk of secondary injuries. However, current rehabilitation methods, such as physical therapy, functional training, and pain management, are confronted with problems in clinical practice, including significant variation in efficacy, poor patient adherence, and prolonged rehabilitation period. There is an urgent need for a unified rehabilitation strategy to address these problems. To this end, the Spinal Trauma Group of the Orthopedic Physicians Branch of the Chinese Medical Association and the Spine Health Professional Committee of the Chinese Human Health Technology Promotion Association organized experts from relevant fields to formulate Evidence-based guidelines for rehabilitation treatment after internal fixation of thoracolumbar spine fracture in adults ( version 2025) by integrating evidences from clinical researches and advanced rehabilitation concepts at home and abroad. A total number of 14 recommendations concerning the rehabilitation treatment with multimodal analgesia, psychological intervention, deep vein thrombosis prevention, core muscle and extremity exercise, appropriate use of braces, early weight-bearing, device-aided rehabilitation exercise, neuroregulatory therapy, rehabilitation team were put forward, aiming to standardize the post-operative rehabilitation process following internal fixation, promote the functional recovery, and enhance patients′ quality of life.

BACKGROUND:Traumatic brain injury is a condition in which the normal function of the brain is disrupted by a bump or impact to the head.It is necessary to find effective treatments and objective targets that can help doctors diagnose the injury status and restore the brain function of patients. OBJECTIVE:To explore the effect of electroacupuncture combined with low-frequency transcranial ultrasound stimulation on the electroencephalographic signals of rats with traumatic brain injury. METHODS:Forty 6-week-old SPF male Sprague-Dawley rats were randomly divided into five groups:sham group,model group,electroacupuncture group,low-frequency transcranial ultrasound stimulation group and combined group(electroacupuncture+low-frequency transcranial ultrasound stimulation),with eight rats in each group.Feeney weight-drop method was used to establish the animal model of traumatic brain injury.In the sham group,the bone window was only opened without impact.Interventions were started at 1 day after modeling.Electroacupuncture in the electroacupuncture group,low-frequency transcranial ultrasound stimulation in the low-frequency transcranial ultrasound stimulation group,and electroacupuncture+low-frequency transcranial ultrasound stimulation in the combined group were performed for days in total.The modified neurological severity scale score for assessing rats'neurological deficits was performed at 8 hours after modeling.The percentage of spontaneous alternation behavior in the Y-maze was measured at 7 days after modeling.Then,the electroencephalographic signals were collected and electroencephalographic data of α,β,θ,and δ waves were extracted by fast Fourier transform,and the value of oscillation amplitude and energy ratio were calculated in α,β,θ,and δ waves,as well as the Lempel-Ziv complexity and sample entropy. RESULTS AND CONCLUSION:Compared with the sham group,the modified neurological severity scale scores in the model group,electroacupuncture group,low-frequency transcranial ultrasound stimulation group and combined group were significantly increased at 8 hours after modeling(P<0.05).Compared with the sham group,the value of oscillation amplitude in δ wave and the value of δ energy ratio were significantly increased in the model group at 7 days after modeling,meanwhile the percentage of spontaneous alternation behavior in Y-maze,and the value of α/β energy ratio,Lempel-Ziv complexity,and sample entropy were significantly decreased(P<0.05).Compared with the model group,the value of oscillation amplitude in α and δ waves was significantly decreased in the combined group(P<0.05),while the value of α/β energy ratio was significantly increased(P<0.05)and the value of δ energy ratio was significantly decreased(P<0.05)in the electroacupuncture group,low-frequency transcranial ultrasound stimulation group and combined group.Compared with the electroacupuncture group and low-frequency transcranial ultrasound stimulation group,the value of δ energy ratio was significantly decreased in the combined group(P<0.05),while the percentage of spontaneous alternation behavior,the value of α/β energy ratio,the Lempel-Ziv complexity,and the sample entropy were significantly increased(P<0.05).To conclude,abnormal electroencephalographic signals can appear in rats with traumatic brain injury,while the electroacupuncture combined with low-frequency transcranial ultrasound stimulation can alleviate the abnormal electroencephalographic signals in rats,which suggests the electroencephalographic frequency domain value and nonlinear features can be used to assess the severity of traumatic brain injury.

BACKGROUND:With the continuous advancement of medical technology,stem cell therapy has been used to treat a variety of diseases,including amyotrophic lateral sclerosis. OBJECTIVE:To review the research progress of stem cell therapy for amyotrophic lateral sclerosis,and prospect the development trend of this field. METHODS:PubMed,China National Knowledge Infrastructure(CNKI),and WanFang Data were searched for articles published from 1995 to 2024 using the key words"amyotrophic lateral sclerosis,mesenchymal stem cells,neural stem/progenitor cells,pluripotent stem cells."A total of more than 1 700 articles were retrieved,and 58 articles were finally included in this review. RESULTS AND CONCLUSION:Amyotrophic lateral sclerosis is a neurodegenerative disease that affects lower motor neurons in the brainstem and spinal cord and upper motor neurons in the motor cortex.The related research of stem cells in the treatment of amyotrophic lateral sclerosis has become a research hotspot.In this review,we summarize the application of different types of stem cells in amyotrophic lateral sclerosis research,including mesenchymal stem cells,neural stem progenitor cells,and induced pluripotent stem cells,and evaluate the key points of preclinical research such as stem cell source,cell volume,stem cell modification methods,and drug delivery routes,which lays the foundation for the future application of stem cell therapy.

AIM:To exploring the mechanism of Xin Mai Jia(XMJ)in inhibiting hypertensive cardiac hypertrophy through network pharmacology and animal experiments.METHODS:Retrieving the ac-tive ingredients and target points of XMJ by search-ing the TCMSP database and related literature re-ports;using the Gene Cards,OMIM,and Drug Bank databases to screen targets for hypertensive cardi-ac hypertrophy;constructing a network of tradi-tional Chinese medicine-active ingredients-poten-tial targets and a protein-protein interaction(PPI)network;using DAVID software for target gene on-tology(GO)functional enrichment analysis and Kyo-to Encyclopedia of Genes and Genomes(KEGG)pathway enrichment analysis;using Auto Dock soft-ware for molecular docking.A spontaneously hy-pertensive rat(SHR)model was established,and hematoxylin-eosin(HE)staining was used to detect the morphology of cardiac tissue and cellular hy-pertrophy,Masson staining was used to detect col-lagen deposition in cardiac tissue,and Western blot to detect the expression of heat shock protein(HSP90AA1),mammalian target of rapamycin(mTOR),peroxisome proliferator-activated receptor y(PPARG),and tumor necrosis factor(TNF-α)in car-diac tissue.RESULTS:A total of 56 potential active ingredients were identified in XMJ,and 5,492 tar-gets related to hypertensive cardiac hypertrophy were obtained.The targets in the core network were ranked according to their Degree values,and four main targets were selected:HSP90AA1,mTOR,PPARG,and TNF-α.The results of HE staining showed that compared with the normal group,the average area of cardiomyocytes in the SHR group increased significantly(P＜0.05),while there was no significant change in the XMJ group.The hypertro-phy in the SHR+XMJ group was significantly alleviat-ed(P＜0.05).The results of Masson staining showed that compared with the normal group,the levels of interstitial fibrosis and perivascular fibrosis in the SHR group rats increased significantly(P＜0.01),and XMJ could significantly reduce the fibrosis levels in the SHR group rats(P＜0.01).The results of Western blot showed that compared with the normal group rats,the expression of HSP90AA1 and PPARG in the myocardial tissue of SHR group rats was downregu-lated,mTOR phosphorylation was downregulated,and TNF-α was significantly upregulated(P＜0.01).In the SHR+XMJ group,the expression of HSP90AA1,PPARG,and TNF-α in the myocardial tis-sue of rats returned to normal levels,and mTOR phosphorylation returned to normal levels.In the XMJ group,there were no significant changes in the above indicators compared with the normal group rats.CONCLUSION:The mechanism underly-ing the inhibitory effect of XMJ on myocardial cell hypertrophy in hypertension involves a comprehen-sive action through multiple components,multiple targets,and multiple pathways.