Attempts have been made to modulate motor sequence learning (MSL) through repetitive transcranial magnetic stimulation, targeting different sites within the sensorimotor network. However, the target with the optimum modulatory effect on neural plasticity associated with MSL remains unclarified. This study was therefore designed to compare the role of the left primary motor cortex and the left supplementary motor area proper (SMAp) in modulating MSL across different complexity levels and for both hands, as well as the associated neuroplasticity by applying intermittent theta burst stimulation together with the electroencephalogram and concurrent transcranial magnetic stimulation. Our data demonstrated the role of SMAp stimulation in modulating neural communication to support MSL, which is achieved by facilitating regional activation and orchestrating neural coupling across distributed brain regions, particularly in interhemispheric connections. These findings may have important clinical implications, particularly for motor rehabilitation in populations such as post-stroke patients.
Humans ; Transcranial Magnetic Stimulation ; Motor Cortex/physiology* ; Male ; Electroencephalography ; Neuronal Plasticity/physiology* ; Female ; Adult ; Evoked Potentials, Motor/physiology* ; Young Adult ; Learning/physiology*

BACKGROUND: Tissue engineering holds promise for vascular repair and regeneration by mimicking the extracellular matrix of blood vessels. However, achieving a functional and thick vascular wall with aligned fiber architecture by electrospinning remains a significant challenge. METHODS: A novel electrospinning setup was developed that utilizes an auxiliary electrode and a spring. The impact of process parameters on fiber size and morphology was investigated. The structure and functions of the scaffolds were evaluated through material characterization and assessments of cellular biocompatibility. RESULTS: The new setup enabled controlled deposition of fibers in different designed orientations. The fabricated small-diameter vascular scaffolds consisted of an inner layer of longitudinally oriented fibers and an outer layer of circumferentially oriented fibers (L + C vascular scaffold). Key parameters, including rotational speed, the utilization of the auxiliary electrode, and top-to-collector distance (TCD) significantly influenced fiber orientation. Additionally, voltage, TCD, feed rate, needle size, auxiliary electrode and collector-auxiliary electrode distance affected fiber diameter and distribution. Mechanical advantages and improved surface wettability of L + C vascular scaffold were confirmed through tensile testing and water contact angle. Cellular experiments indicated that L + C vascular scaffold facilitated cell adhesion and proliferation, with human umbilical vein endothelial cells and smooth muscle cells attaching and elongating along the fiber direction of the inner and outer layer, respectively. CONCLUSION This study demonstrated the feasibility of fabricating fiber-aligned, thick-walled vascular scaffolds using a modified electrospinning setup. The findings provided insights into how the auxiliary electrode, specific collector influenced fiber deposition, potentially advancing biomimetic vascular scaffold engineering.

BACKGROUND: Tissue engineering holds promise for vascular repair and regeneration by mimicking the extracellular matrix of blood vessels. However, achieving a functional and thick vascular wall with aligned fiber architecture by electrospinning remains a significant challenge. METHODS: A novel electrospinning setup was developed that utilizes an auxiliary electrode and a spring. The impact of process parameters on fiber size and morphology was investigated. The structure and functions of the scaffolds were evaluated through material characterization and assessments of cellular biocompatibility. RESULTS: The new setup enabled controlled deposition of fibers in different designed orientations. The fabricated small-diameter vascular scaffolds consisted of an inner layer of longitudinally oriented fibers and an outer layer of circumferentially oriented fibers (L + C vascular scaffold). Key parameters, including rotational speed, the utilization of the auxiliary electrode, and top-to-collector distance (TCD) significantly influenced fiber orientation. Additionally, voltage, TCD, feed rate, needle size, auxiliary electrode and collector-auxiliary electrode distance affected fiber diameter and distribution. Mechanical advantages and improved surface wettability of L + C vascular scaffold were confirmed through tensile testing and water contact angle. Cellular experiments indicated that L + C vascular scaffold facilitated cell adhesion and proliferation, with human umbilical vein endothelial cells and smooth muscle cells attaching and elongating along the fiber direction of the inner and outer layer, respectively. CONCLUSION This study demonstrated the feasibility of fabricating fiber-aligned, thick-walled vascular scaffolds using a modified electrospinning setup. The findings provided insights into how the auxiliary electrode, specific collector influenced fiber deposition, potentially advancing biomimetic vascular scaffold engineering.

BACKGROUND: Tissue engineering holds promise for vascular repair and regeneration by mimicking the extracellular matrix of blood vessels. However, achieving a functional and thick vascular wall with aligned fiber architecture by electrospinning remains a significant challenge. METHODS: A novel electrospinning setup was developed that utilizes an auxiliary electrode and a spring. The impact of process parameters on fiber size and morphology was investigated. The structure and functions of the scaffolds were evaluated through material characterization and assessments of cellular biocompatibility. RESULTS: The new setup enabled controlled deposition of fibers in different designed orientations. The fabricated small-diameter vascular scaffolds consisted of an inner layer of longitudinally oriented fibers and an outer layer of circumferentially oriented fibers (L + C vascular scaffold). Key parameters, including rotational speed, the utilization of the auxiliary electrode, and top-to-collector distance (TCD) significantly influenced fiber orientation. Additionally, voltage, TCD, feed rate, needle size, auxiliary electrode and collector-auxiliary electrode distance affected fiber diameter and distribution. Mechanical advantages and improved surface wettability of L + C vascular scaffold were confirmed through tensile testing and water contact angle. Cellular experiments indicated that L + C vascular scaffold facilitated cell adhesion and proliferation, with human umbilical vein endothelial cells and smooth muscle cells attaching and elongating along the fiber direction of the inner and outer layer, respectively. CONCLUSION This study demonstrated the feasibility of fabricating fiber-aligned, thick-walled vascular scaffolds using a modified electrospinning setup. The findings provided insights into how the auxiliary electrode, specific collector influenced fiber deposition, potentially advancing biomimetic vascular scaffold engineering.

BACKGROUND: Tissue engineering holds promise for vascular repair and regeneration by mimicking the extracellular matrix of blood vessels. However, achieving a functional and thick vascular wall with aligned fiber architecture by electrospinning remains a significant challenge. METHODS: A novel electrospinning setup was developed that utilizes an auxiliary electrode and a spring. The impact of process parameters on fiber size and morphology was investigated. The structure and functions of the scaffolds were evaluated through material characterization and assessments of cellular biocompatibility. RESULTS: The new setup enabled controlled deposition of fibers in different designed orientations. The fabricated small-diameter vascular scaffolds consisted of an inner layer of longitudinally oriented fibers and an outer layer of circumferentially oriented fibers (L + C vascular scaffold). Key parameters, including rotational speed, the utilization of the auxiliary electrode, and top-to-collector distance (TCD) significantly influenced fiber orientation. Additionally, voltage, TCD, feed rate, needle size, auxiliary electrode and collector-auxiliary electrode distance affected fiber diameter and distribution. Mechanical advantages and improved surface wettability of L + C vascular scaffold were confirmed through tensile testing and water contact angle. Cellular experiments indicated that L + C vascular scaffold facilitated cell adhesion and proliferation, with human umbilical vein endothelial cells and smooth muscle cells attaching and elongating along the fiber direction of the inner and outer layer, respectively. CONCLUSION This study demonstrated the feasibility of fabricating fiber-aligned, thick-walled vascular scaffolds using a modified electrospinning setup. The findings provided insights into how the auxiliary electrode, specific collector influenced fiber deposition, potentially advancing biomimetic vascular scaffold engineering.

BACKGROUND: Tissue engineering holds promise for vascular repair and regeneration by mimicking the extracellular matrix of blood vessels. However, achieving a functional and thick vascular wall with aligned fiber architecture by electrospinning remains a significant challenge. METHODS: A novel electrospinning setup was developed that utilizes an auxiliary electrode and a spring. The impact of process parameters on fiber size and morphology was investigated. The structure and functions of the scaffolds were evaluated through material characterization and assessments of cellular biocompatibility. RESULTS: The new setup enabled controlled deposition of fibers in different designed orientations. The fabricated small-diameter vascular scaffolds consisted of an inner layer of longitudinally oriented fibers and an outer layer of circumferentially oriented fibers (L + C vascular scaffold). Key parameters, including rotational speed, the utilization of the auxiliary electrode, and top-to-collector distance (TCD) significantly influenced fiber orientation. Additionally, voltage, TCD, feed rate, needle size, auxiliary electrode and collector-auxiliary electrode distance affected fiber diameter and distribution. Mechanical advantages and improved surface wettability of L + C vascular scaffold were confirmed through tensile testing and water contact angle. Cellular experiments indicated that L + C vascular scaffold facilitated cell adhesion and proliferation, with human umbilical vein endothelial cells and smooth muscle cells attaching and elongating along the fiber direction of the inner and outer layer, respectively. CONCLUSION This study demonstrated the feasibility of fabricating fiber-aligned, thick-walled vascular scaffolds using a modified electrospinning setup. The findings provided insights into how the auxiliary electrode, specific collector influenced fiber deposition, potentially advancing biomimetic vascular scaffold engineering.

Clinical data of 166 children with Meckel's diverticulum, who were treated with laparoscopic surgery in our center from January 2015 to January 2023, were retrospectively analyzed, including 69 cases receiving enhanced recovery after surgery (ERAS group) and 97 cases with traditional perioperative care (control group). There were no significant differences in age ( t=1.391), gender ( χ2=1.067), body weight ( t=1.182 ), operation time ( t=1.093), diverticulum location ( Z=0.405), surgical procedures ( χ2=0.053), and intraoperative blood loss ( t=0.394) between two groups (all P>0.05). Compared to control group, ERAS group had shorter time for indwelling gastric tube (1.1±0.7 d vs.3.8±0.8 d), earlier postoperative feeding (2.5±0.6 d vs.4.9±0.7 d), less intravenous fluid infusion (3.9±1.0 d vs. 5.3±1.1 d), shorter length of hospital stay (8.2±1.6 d vs.10.9±2.3 d), and lower hospitalization expenditure (1.8±0.2)×10 4 yuan vs. (2.1±0.3)×10 4 yuan ( t=23.289,21.718,8.505,8.379,8.769,all P<0.05). There was no significant difference in incidence of postoperative complications between two groups ( χ2=0.431, P>0.05). The study indicates that patients treated with ERAS programmed laparoscopic Meckel's diverticulum surgery is safe and effective with rapid recovery and shorter hospital stay.

AIM:To investigate the effects of epal-restat(Epa)on the mitochondrial oxidative stress damage of radiation pneumonitis(RP)mice and to explore its possible mechanism.METHODS:C57BL/6 mice were randomly divided into control(CON),Irradiation(IR),IR combined with Epa(10 mg/kg)and IR combined with Epa(20 mg/kg)group,16 mice in each group.Mouse models of RP were es-tablished by whole thorax irradiation at a dose of 15Gy using a 6-MV linear accelerator.Continuous intragastric administration after IR for 6 or 8 weeks.Lung histopathology was analyzed by HE staining.The expression of aldose reductase(AR)was deter-mined by immunohistochemistry.Mitochondrial morphology of lung tissues was observed by trans-mission electron microscopy.The levels of inflam-matory cytokines(IL-6,TNF-α and TGF-β1)in plas-ma were detected by ELISA.The contents of Malo-ndialdehyde(MDA)and 4-hydroxynonenal(4-HNE)in lung tissues were determined by colorimetry.Sin-gle cell suspension of lung tissues was prepared and reactive oxygen species(ROS)levels in the cells was examined using a DCFH-DA fluorescent probe.Real-time quantitative PCR was used to determine the expression of AR,IL-6,TNF-α and TGF-β1.The protein levels of AR,IL-6,TNF-α,TGF-β1,BAX,Bcl2,Cleaved Caspase-3,8-oxoguanine DNA glycosylase 1(OGG1)and silent information regulator 3(SIRT3)were detected by Western blot analysis.RESULTS:Compared with the CON group,the alveolar hyper-plasia,alveolar septum thickening and inflammato-ry cell infiltration were observed in the IR group.Moreover,the content of inflammatory factors such as IL-6,TNF-α and TGF-β1 and the expression of BAX and Cleaved Caspase-3 were significantly in-creased,and the expression of Bcl2 was obviously decreased after irradiation.Compared with the IR group,Epa robustly alleviated RP.Meanwhile,Epa down-regulated inflammatory cells infiltration and the expression of inflammatory cytokines,such as IL-6,TNF-α and TGF-β1.In addition,Epa could down-regulate the expression of BAX and Cleaved Caspase-3,and up-regulate Bcl2 in lung tissues.Compared with the CON group,the expression of AR,the levels of ROS,MDA and 4-HNE were signifi-cantly increased,the expression of OGG1 and SIRT3 were significantly decreased,and mitochon-drial damage was aggravated in the IR group.Com-pared with IR group,the expression of AR was sig-nificantly down-regulated,the levels of ROS,MDA and 4-HNE were significantly decreased,the expres-sions of OGG1 and SIRT3 were significantly in-creased,and the mitochondrial damage was signifi-cantly alleviated in IR group after 6 to 8 weeks of Epa administration.CONCLUSION:Epa has a pro-tective effect on RP,which may be related to the in-hibition of AR expression,the reduction of mito-chondrial oxidative stress injury,and the inhibition of inflammatory response and cell apoptosis.

Objective To explore the effect of fluid shear stress on the expression of glucose regulatory protein 78(GRP78)and C/EBP homologous protein(CHOP)in human umbilical vein endothelial cells(HUVECs).Methods HUVECs were used as experimental cells,and a fluid dynamics simulation experimental system was designed and constructed.Different fluid shear stresses were applied to the experimental cells by controlling the flow rate of the perfusion fluid in the experimental system.According to the fluid shear stress experienced by the experimental cells in the experimental system,they were divided into low shear stress group(group A;0.4Pa),medium shear stress group(group B;0.8 Pa)and high shear stress group(group C;1.2 Pa).Each group of HUVECs consisted of 3 cell slides,and each slide was repeatedly circulated through the perfusion solution of the experimental system for 12 h.Western blotting was used to detect the levels of GRP78 and CHOP proteins,and real-time quantitative reverse transcription polymerase chain reaction was used to determine the levels of GRP78 and CHOP and their messenger RNA(mRNA)in each group.GraphPad Prism 8.0 software was used to statistically analyze the data.Results(1)The relative expression levels of GRP78 protein in groups A,B and C were 1.33±0.46,0.93±0.34,0.64±0.30,respectively,the difference among groups was statistically significant(F=36.17,P＜0.05).The relative expression level of GRP78 protein in group A was higher than that in group B and group C(both P＜0.01),and the relative expression level of GRP78 protein in group B was higher than that in group C(P=0.0013).The relative expression levels of CHOP protein in the three groups were 1.29±0.38 in group A,0.90±0.34 in group B,and 0.59±0.29 in group C,the difference among groups was statistically significant(F=41.27,P＜0.05).The relative expression level of CHOP protein in group A was higher than that in group B and group C(both P＜0.01),and the relative expression level of CHOP protein in group B was higher than that in group C(P=0.0 004).(2)The relative expression levels of GRP78 mRNA in groups A,B,and C were 18.3±3.4,11.3±1.8,5.4±2.2,respectively,the difference among groups was statistically significant(F=189.20,P＜0.05).The relative expression level of GRP78 mRNA in group A was higher than that in group B and group C(both P＜0.01),and the relative expression level of GRP78 mRNA in group B was higher than that in group C(P＜0.01).The relative expression levels of CHOP mRNA in the three groups were 20.4±3.8 in group A,14.2±2.1 in group B,and 7.8±1.3 in group C,the difference among groups was statistically significant(F=171.80,P＜0.05).The relative expression level of CHOP mRNA in group A was higher than that in group B and group C(both P＜0.01),and the relative expression level of CHOP mRNA in group B was higher than that in group C(P＜0.01).Conclusion Low fluid shear stress may increase the protein and mRNA expression levels of GRP78 and CHOP in HUVECs.

This paper combed the principle and characteristics of microdialysis(microperfusion)technology,sum-marized the application status in transdermal drug delivery system and analyzed the problems and challenges.It also outlooked on future development direction and provide relevant suggestions which can contribute to provide refer-ence for further research in this field.