BACKGROUND:The extracellular-regulated protein kinase 5(ERK5)signaling protein is essential for the survival of organisms,and resveratrol can promote osteoblast proliferation through various pathways.However,whether resveratrol can regulate osteoblast function through the ERK5 signaling protein needs further verification. OBJECTIVE:To explore the regulatory effect of ERK5 on the proliferation of MC3T3-E1 cells and related secreted proteins,and to further verify whether resveratrol can complete the above process by activating ERK5. METHODS:Mouse MC3T3-E1 preosteoblasts were treated with complete culture medium,XMD8-92(an ERK5 inhibitor),epidermal growth factor(an ERK5 activator),resveratrol alone,XMD8-92+EGF,and resveratrol+XMD8-92,respectively.Western blot assay was used to detect the expression of ERK5 and p-ERK5 proteins,proliferation-related proteins Cyclin D1,CDK4 and PCNA,and osteoblast-secreted proteins osteoprotegerin and receptor activator of nuclear factor-κB ligand in MC3T3-E1 cells of each group.The fluorescence intensity of ERK5,osteoprotegerin and receptor activator of nuclear factor-κB ligand in each group was detected by cell immunofluorescence staining,and cell proliferation was detected by EdU staining,respectively.The appropriate concentration and time of resveratrol intervention in MC3T3-E1 cells were determined by cell morphology observation and cell counting kit-8 assay. RESULTS AND CONCLUSION:The activation of ERK5 signaling protein could effectively promote the proliferation of MC3T3-E1 cells,up-regulate the osteoprotegerin/receptor activator of nuclear factor-κB ligand ratio.The appropriate concentration and time for resveratrol intervention in MC3T3-E1 cells was 5 μmol/L and 24 hours,respectively.Resveratrol could activate ERK5 signaling protein,thereby promoting osteoblast proliferation and up-regulating the osteoprotegerin/RANKL ratio.All these results indicate that resveratrol can promote the proliferation of MC3T3-E1 cells and up-regulate the osteoprotegerin/RANKL ratio by activating the ERK5 signaling protein.

Through consulting herbal medicine， medical books， and local chronicles from past dynasties to modern times， this paper systematically researched Spatholobi Caulis from name， origin， producing areas， harvesting， processing， usage， quality evaluation， functions and indications， providing a reference for the development and utilization of famous classical formulas containing Spatholobi Caulis. According to the research， Spatholobi Caulis was first recorded in the Annals of Shunning Prefecture from the Qing dynasty. It was originally a medicinal herb commonly used in Shunning， Yunnan， and was named from the red juice resembling chicken blood that flowed out after the vein was cut off. The mainstream original plants of each dynasty were Kadsura heteroclita and Spatholobus suberectus. Among them， K. heteroclita mainly focused on dispersing blood stasis and unblocking meridians， mainly treating rheumatic pain and injuries caused by falls or blows， and it is mostly used as the raw material of Jixueteng ointments. S. suberectus was commonly used as decoction pieces in decoction， which had the functions of promoting blood circulation and replenishing blood， activating meridians and collaterals， and mainly used for treating anemia， irregular menstruation， and rheumatic bone pain. The production area of Spatholobi Caulis recorded in the Qing dynasty was Yunnan. Currently， the main production area of S. suberectus is Guangxi， while the main production area of K. interior is Yunnan. In the Qing dynasty， the usage of Spatholobi Caulis was an individual prescription with other herbs before making ointments， which was usually composed of the juice of it， safflower， angelica， and glutinous rice. But in modern times， Spatholobi Caulis is mostly sliced and dried for use. The quality of Spatholobi Caulis is often determined by the number of reddish-brown concentric circles on the cut surface， with a higher number indicating better quality. Additionally， the presence of resinous secretions is also considered desirable. Based on the research findings， it is suggested that when developing famous classical formulas containing Spatholobi Caulis， the choice of the primary source should be S. suberectus or K. heteroclita， taking into consideration the therapeutic effects of the formula. It is also recommended that the latest plant classification be referenced in the next edition of Chinese Pharmacopoeia， adjusting the primary source of Kadsurae Caulis to K. heteroclita to avoid confusion caused by inconsistent original names， and the functions adjust to promote Qi circulation and relieve pain， disperse blood stasis and unblock collaterals， treating injuries caused by falls and bruises.

Objective:To explore the application effect of the modified presentation assimilation discussion combined with heuristic clinical medicine teaching in training of extracorporeal membrane oxygenation specialist nurses.Methods:The convenient sampling method was used to select 62 nurses who participated in training of extracorporeal membrane oxygenation specialist nurses in the Second Affiliated Hospital of Zhengzhou University from January to June 2023 as the research objects. A total of 30 nurses who participated in the 25th training session from January to March 2023 were selected as the control group, and 32 nurses who participated in the 26th training session from April to June 2023 were selected as the observation group. The control group received conventional training method, while the observation group received modified presentation assimilation discussion combined with heuristic clinical medicine teaching. The theoretical knowledge and operational skills of nurses, core competence of extracorporeal membrane oxygenation specialist nurses and training satisfaction were compared between the two groups after training.Results:After training, the scores of theoretical knowledge and operational skills, core competence of extracorporeal membrane oxygenation specialist nurses and training satisfaction in observation group were higher than those in control group, and the differences were statistically significant ( P<0.05) . Conclusions:The modified presentation assimilation discussion combined with heuristic clinical medicine teaching can improve the theoretical knowledge and operational skills of extracorporeal membrane oxygenation specialist nurses, and the nurses' training satisfaction is higher.

Objective To investigate the safety and efficacy of percutaneous left atrial appendage closure(LAAC)in the prevention of stroke in elderly patients with non-valvular atrial fibrillation(NVAF)complicated with heart failure(HF).Methods A total of 125 NVAF patients aged ≥65 years undergoing percutaneous LAAC in Northern Jiangsu People's Hospital from January 2019 to October 2022 were recruited,and were divided into HF group(35 patients)and non-HF(90 patients)according to whether being complicated with HF.Their clinical features,characteristics of left atrial appendage,operation procedure and follow-up results were analyzed and compared between the two groups.Results The non-HF group had significant smaller proportions of smok-ing,drinking and previous stroke,lower left ventricular ejection fraction(LVEF),and higher ratio of one-stop surgery,but lower renal dysfunction ratio and B-type natriuretic peptide(BNP)lever when compared with the HF group(P＜0.05,P＜0.01).There were no statistical differences in the type of occluder,shape and depth of LAA and long diameter of LAA opening,residual shunt,pericardial effusion,incidence of newly stroke onset and death ratio between the two groups dur-ing perioperative period(P＞0.05).The HF group had an obviously shorter follow-up time(12.10±1.30 months vs 12.72±1.10 months,P=0.025)and higher incidence of recurrent HF(8.57％vs 0％,P=0.005)than the non-HF group.Conclusion LAAO is safe and feasible for elderly NVAF patients complicated with HF,and it is safe and effective in preventing ischemic stroke.

Objective:To analyze the epidemiological and etiological characteristics of a death case of meningococcal meningitis in Hengyang city, Hunan Province in 2024.Methods:Epidemiological investigation of the death case was performed, and samples from the patient and close contacts were collected. Following cultivation and isolation, Neisseria meningitidis ( Nm) strains were analyzed by antimicrobial susceptibility testing, pulsed field gel electrophoresis (PFGE), and whole-genome sequencing for analyzing epidemiological and etiological characteristics. Phylogenetic analysis was carried out using core genomic multilocus sequence typing (cgMLST). Results:The case was a 16-year-old high school boarding student with fulminant meningococcal meningitis. He had shock symptoms, and died within 24 h of the onset of symptoms. Six Nm strains were isolated from the patient and his roommates, belonging to two distinct clades. Isolate 144569 from the patient was highly homologous to isolate 144572 from a close contact, both belonging to the highly pathogenic sublineage L44.1 of CC4821. The typical molecular features was C: P1.7-2, 14: F5-101: ST4821 (CC4821). The two strains carried the antimicrobial resistance genes of gyrA-71 and penA-552, indicating reduced susceptibility to quinolone and penicillin, which was with their resistance phenotype. The isolates from four close contacts clustered within the same clade, characterized by the molecular features of B: P1.18-25, 9-18: ST5829 (UA). Conclusions:The death case is caused by Nm serogroup C from highly pathogenic sublineage L44.1 of CC4821. The spread of this isolate has the potential risk of outbreaks of invasive meningococcal disease. It is necessary to enhanced the molecular epidemiological surveillance, particularly focusing on the transmission of multiple serogroups of Nm among adolescents and the increasing exposure risk.

Objective To investigate the predictive value of lactate/albumin(L/A)and C-reactive protein(CRP)for 90-day mortality risk in patients with sepsis.Methods Clinical data from 125 patients diagnosed with sepsis in the Comprehensive Intensive Care Unit,Jinhua People's Hospital from February 2021 to February 2024 retrospectively were collected.According to 90-day death or not of patients,they were divided into death group(n=61)and survival group(n=64).Independent risk factors for 90-day mortality in patients with sepsis were analyzed by using multivariate Logistic regression.Receiver operating characteristic(ROC)curve was drawn to analyze the predictive value of L/A,CRP,and L/A combined CRP for 90-day mortality in patients with sepsis.At the same time,subgroup analysis of patients was performed according to the best cut-off value,and Kaplan-Meier survival curves were drawn.Results Multivariate Logistic regression analysis showed that high CRP(OR=1.009,95％CI:1.003-1.015,P=0.006),high L/A(OR=1.449,95％CI:1.050-2.000,P=0.024),and concurrent acute kidney injury(OR=2.890,95％CI:1.198-6.975,P=0.018)were independent risk factors for 90-day mortality in patients with sepsis.Area under the curve(AUC)for predicting 90-day mortality in patients with sepsis by using CRP,L/A,and L/A combined with CRP were 0.645,0.612 and 0.708 respectively.Subgroup analysis showed that 90-day mortality of patients with sepsis in L/A＞1.41 group was significantly higher than that in L/A≤1.41 group(P=0.001),and 90-day mortality of patients with sepsis in CRP＞93.29mg/L group was significantly higher than that in CRP≤93.29mg/L group(P=0.001),which was consistent with the analysis results of Kaplan-Meier survival curve.Conclusion Both L/A and CRP have certain predictive value for 90-day prognosis of patients with sepsis,and their combined predictive effect is better.

Objective To design a portable intelligent cleaner for medical lumen instruments to enhance cleaning efficiency.Methods The portable intelligent cleaner had a box-body shape and a shell made of 304 stainless steel,which was composed of a circuit control board,a micro pump,lithium batteries,a charging interface,a rinse tube and connectors.The circuit control board used a STM32G030C8T6 integraged circuit,which was equipped with a countdown digital tube to display the time left for cleaning;the micro pump and lithium batteries were placed at the inner wall of the box bottom,the charging interface and water inlet/outlet inteface were put on the outside of the front wall of the box bottom,the water inlet/outlet interface was connected with a silicon rinse tube linked to an adapter at its distal end,and the adapters with different calibers were compatible with sizes of medical lumen instruments.Totally 9 672 pieces of lumen instruments received by some hospital's disinfection supply center from May to October 2021 were divided into 2 groups with the convenience sampling method,with 4 836 pieces in each group.The odd-numbered instruments were enrolled into a control group and cleaned with an ultrasonic cleaner and a lumen brush,and the even-numbered instruments were included into an experimental group and cleaned conventionally after pretreatment by the intelligent cleaner.The two groups were compared in terms of eaning efficiency and satisfaction.Results Testing by visual inspection,magnifying glass with light source and white stripe method showed that the experimental group behaved better than the control group in the cleaning qualification rate,whose satisfaction rate(100％)was also higher than that of the control group(86.53％),with all the differences being statistically significant(P＜0.05).Conclusion The portable cleaner with easy operation enhances the cleaning quality and efficiency for medical lumen instruments.[Chinese Medical Equipment Journal,2024,45(10):114-117]

Objective To analyze the correlation between the sagittal orientation of lumbar pedicle screws and screw loosening based on the craniocaudal cyclic load and artificial vertebra,and to provide a reference for the improvement of screw orientation during surgery,consequently reducing the incidence of screw loosening postoperatively.Methods Pedicle screws were inserted into artificial vertebrae in the cranial,parallel,and caudal orientations.After the artificial vertebra was installed in the material testing machine,the model was subjected to a 100 N preload and 166 N cyclic load for 10 000 cycles.During loading,displacements were recorded and cycle-displacement curves were drawn.After the test was completed and the screws were removed,the screw hole volume was measured and the screw hole volume ratio(the ratio of screw hole volume to the volume of the screw inserted into the vertebra)was calculated.Results The cyclic displacement curve showed that the cranial group had the largest displacement,followed by the parallel and caudal groups.The screw-hole volume ratio results showed that the cranial group had the highest ratio,followed by the parallel and caudal groups.Correlation analysis showed a negative relationship between screw sagittal orientation and terminal displacement(displacement corresponding to the 10 000th cycle)(ρ=-0.897,P=0.02)and screw hole volume ratio(ρ=-0.902,P=0.01).Conclusions There is a negative correlation between the sagittal orientation of the lumbar pedicle screw and screw loosening.Namely,when the screw sagittal orientation is adjusted from a cranial tilt to a parallel and even caudal tilt at a certain angle range,the incidence of screw loosening is reduced.

Pulmonary hypertension (PH) is a progressive and fatal disease. The dysfunction of pulmonary artery endothelial cells (PAECs) is one of its important pathogenic factors. PAECs are monolayer flat epithelial cells, which play an important role in maintaining pulmonary vascular homeostasis. Studies have found that PAECs show damage and apoptosis at the early stage of PH development, while PAECs show anti-apoptotic characteristics at the late stage of PH development. The transition of PAECs into mesenchymal cells induced by hypoxic and inflammatory factors is also involved in the pathogenesis of PH. Carcinoid metabolism and mitochondrial dysfunction, bone mor- phogenic type 2 receptor mutation, epigenetic changes and inflammation of PAECs are the main pathogenesis of pulmonary vascular endothelial dysfunction in PH patients. New therapeutic measures targeting PAECs dysfunction are expected to play an important role in the treatment of PH in the future.

Objective:To analyze the influence of forming direction on the surface characteristics,elastic modulus,bending strength and fracture toughness of printed parts and the relationship between forming direction and force direction,and to provide scientific basis and guidance for the clinical applica-tion of oral denture base resin materials.Methods:The 3D printing technology was used to print denture base resin samples.The shape and size of the samples referred to the current standard for testing conven-tional denture base materials.The samples used for physical performance testing were cylindrical(with a diameter of 15 mm and a thickness of 1 mm)and printed at different angles along the Z axis(0°,45°,90°).Scanning electron microscope was used to observe the microscopic topography of the different sam-ples.The color stability of different samples was observed by color stabilizer.The surface roughness of the samples was analyzed by using surface roughness tester.The Vickers hardness was measured to ana-lyze the hardness of the samples.The samples used for mechanical performance testing were rectangular(elastic modulus and bending strength:A length of 64 mm,a width of 10 mm,and a height of 3.3 mm;fracture toughness:A length of 39 mm,a width of 8 mm,and a height of 4 mm),divided into two groups:W group and H group.The W group was printed from the bottom up along the Z axis with the length × width as the bottom surface parallel to the X,Y axis plane,while the H group printed from the bottom up along the Z axis with the length × height as the bottom surface parallel to the X,Y axis plane.The forming angles of both groups were equally divided into 0°,45°,and 90°.The elastic modulus,bending strength and fracture toughness of different samples were studied through universal mechanical testing machine.SPSS 22.0 software was used for statistical analysis.Results:The microscopic topogra-phy and roughness of different samples were closely related to the printing direction,with significant differences between the 0°,45°,and 90° specimens.The 0° specimens had the smoothest surface(roughness＜1 μm).The surface of the 45 ° specimen was the roughest(roughness＞3 μm).The microhardness of the 0° sample was the best[(196.13±0.20)MPa],with a significant difference com-pared with the 90° sample[(186.62±4.81)MPa,P＜0.05].The mechanical properties of different samples were also closely related to the printing direction.The elastic modulus,bending strength,and fracture toughness of the 45° samples in the W group were the highest compared with the other groups.The results of elastic modulus showed that in the H group,the 45° specimens had the highest elastic mo-dulus,which was significantly different from the 0° and 90° specimens(P＜0.05).The elastic modulus of 0° and 45° specimens in the W group were higher than those in 90° specimens(P＜0.05).The bending strength results showed that there was no significant difference between the specimens from dif-ferent angles in the H group.The bending strength of the 90° specimens in the W group was the smallest,and there was a significant difference between 90° and the 0° and 45° specimens(P＜0.05);And the bendind strength of the 0° and 45° specimens in the W group was significantly higher than that of the 0° and 45° specimens in the H group(P＜0.05).The fracture toughness results showed that the fracture toughness of the H group specimens was lower than 1.9 MPa m1/2,which was specified in the denture base standard.The 45° samples in the W group were the highest,with significant differences compared with the 0° and 90° samples(P＜0.05).And the 90° samples of the W group specimens were lower than 1.9 MPa m1/2.And the fracture toughness of the 45° specimen in the W group was significantly higher than that of all the specimens in the H group(P＜0.05).Conclusion:The 0° samples had rela-tively better physical properties.The 45° samples had the best mechanical properties.But the fracture toughness of specimens(H group and 90° samples of W group)did not yet meet clinical requirements.That indicated that the characteristics of the 3D printing denture base resin were affected by the printing direction.Only when the performance of the printed samples in all directions met the minimum require-ments of the standard,they could be used in clinical practice.