BACKGROUND:Pearl powder is rich in many active ingredients,which can promote the proliferation and migration of fibroblasts,thus promoting wound healing and skin tissue regeneration.However,the effect of nano-pearl powder water-soluble matrix on proliferation,migration and apoptosis of mouse fibroblasts L929 has not been reported.OBJECTIVE:To investigate the effect of nano-pearl powder water-soluble matrix on the proliferation,migration and apoptosis of mouse fibroblasts L929.METHODS:Passage 6 L929 cells were divided into five groups.The negative control group did not add any material;the positive control group added PBS,and the low,medium and high mass concentration groups of water-soluble matrix were added with 10,25 and 40 μg/mL of nano-pearl powder water-soluble matrix,respectively.The proliferation of L929 cells was detected by MTT assay.The migration ability of L929 cells was detected by Transwell.The apoptosis rate of L929 cells was detected by flow cytometry.The expressions of apoptosis-related proteins Bax,Bcl-2,and Caspase-1 were detected by western blot assay.RESULTS AND CONCLUSION:(1)The results of MTT assay and Transwell chamber experiment showed that the water-soluble matrix of nano-pearl powder could promote the proliferation and migration of L929 cells,and it was concentration dependent.(2)Flow cytometry and western blot assay results showed that the water-soluble matrix of nano-pearl powder could reduce the apoptosis rate of L929 cells and the protein expression of Bax and Caspase-1,and increase the expression of Bcl-2 protein,and it was concentration dependent.(3)These findings exhibited that the water-soluble matrix of nano-pearl powder could inhibit cell apoptosis under high mass concentration treatment.The results show that the water-soluble matrix of nano-pearl powder can promote the proliferation and migration of fibroblasts and inhibit the apoptosis of fibroblasts.

BACKGROUND:Pearl powder is rich in many active ingredients,which can promote the proliferation and migration of fibroblasts,thus promoting wound healing and skin tissue regeneration.However,the effect of nano-pearl powder water-soluble matrix on proliferation,migration and apoptosis of mouse fibroblasts L929 has not been reported.OBJECTIVE:To investigate the effect of nano-pearl powder water-soluble matrix on the proliferation,migration and apoptosis of mouse fibroblasts L929.METHODS:Passage 6 L929 cells were divided into five groups.The negative control group did not add any material;the positive control group added PBS,and the low,medium and high mass concentration groups of water-soluble matrix were added with 10,25 and 40 μg/mL of nano-pearl powder water-soluble matrix,respectively.The proliferation of L929 cells was detected by MTT assay.The migration ability of L929 cells was detected by Transwell.The apoptosis rate of L929 cells was detected by flow cytometry.The expressions of apoptosis-related proteins Bax,Bcl-2,and Caspase-1 were detected by western blot assay.RESULTS AND CONCLUSION:(1)The results of MTT assay and Transwell chamber experiment showed that the water-soluble matrix of nano-pearl powder could promote the proliferation and migration of L929 cells,and it was concentration dependent.(2)Flow cytometry and western blot assay results showed that the water-soluble matrix of nano-pearl powder could reduce the apoptosis rate of L929 cells and the protein expression of Bax and Caspase-1,and increase the expression of Bcl-2 protein,and it was concentration dependent.(3)These findings exhibited that the water-soluble matrix of nano-pearl powder could inhibit cell apoptosis under high mass concentration treatment.The results show that the water-soluble matrix of nano-pearl powder can promote the proliferation and migration of fibroblasts and inhibit the apoptosis of fibroblasts.

This paper summarizes professor BAI Yanping's clinical experience in treating rosacea. It is believed that stagnant heat in cutaneous collaterals serves as the core pathogenesis of rosacea， and the interbinding of static blood and heat as well as blockage of cutaneous collaterals constitute the key pathological links. The core therapeutic principles consist of nourishing blood， activating blood circulation to resolve stasis， clearing heat， relieving stagnation and unblocking collaterals. In clinic， Wenqing Decoction （温清饮） is adopted as the basic formula， with flexible modifications according to distinct clinical syndromes and stages of rosacea. Based on clinical syndromes， for erythematotelangiectatic rosacea， the treatment should focus on activating blood to unblock collaterals， clearing heat and cooling blood； for papulopustular rosacea， the treatment should focus on clearing heat and resolving toxins， and resolving stasis and dissipating masses； for hypertrophic phymatous rosacea， the treatment should simultaneously softening hard masses， dissipating stagnation， nourishing blood and moisturizing the skin； for ocular rosacea， the treatment should prioritize clearing liver heat to improve eyesight， unblocking orifices and eliminating heat. Based on the stages， in acute phase， heat-clearing， detoxifying and blood-cooling therapies are emphasized； for protracted chronic phase， concurrent regulation of static blood and heat plus blood-nourishing and collateral-unblocking methods are applied； the consolidation stage targets invigorating the spleen and replenishing qi to strengthen vital resistance and eliminate pathogenic factors. Meanwhile， precise compatibility of aromatic medicinals， blood-level medicinals and channel-guiding medicinals is highly valued. The therapy should balance systemic regulation and local lesion care， and combine internal and external treatment， which may provides clinical references for TCM intervention of rosacea.

This paper summarizes professor BAI Yanping's clinical experience in treating rosacea. It is believed that stagnant heat in cutaneous collaterals serves as the core pathogenesis of rosacea， and the interbinding of static blood and heat as well as blockage of cutaneous collaterals constitute the key pathological links. The core therapeutic principles consist of nourishing blood， activating blood circulation to resolve stasis， clearing heat， relieving stagnation and unblocking collaterals. In clinic， Wenqing Decoction （温清饮） is adopted as the basic formula， with flexible modifications according to distinct clinical syndromes and stages of rosacea. Based on clinical syndromes， for erythematotelangiectatic rosacea， the treatment should focus on activating blood to unblock collaterals， clearing heat and cooling blood； for papulopustular rosacea， the treatment should focus on clearing heat and resolving toxins， and resolving stasis and dissipating masses； for hypertrophic phymatous rosacea， the treatment should simultaneously softening hard masses， dissipating stagnation， nourishing blood and moisturizing the skin； for ocular rosacea， the treatment should prioritize clearing liver heat to improve eyesight， unblocking orifices and eliminating heat. Based on the stages， in acute phase， heat-clearing， detoxifying and blood-cooling therapies are emphasized； for protracted chronic phase， concurrent regulation of static blood and heat plus blood-nourishing and collateral-unblocking methods are applied； the consolidation stage targets invigorating the spleen and replenishing qi to strengthen vital resistance and eliminate pathogenic factors. Meanwhile， precise compatibility of aromatic medicinals， blood-level medicinals and channel-guiding medicinals is highly valued. The therapy should balance systemic regulation and local lesion care， and combine internal and external treatment， which may provides clinical references for TCM intervention of rosacea.

Objective To explore the mediating role of stress-is-enhancing mindset in the relationship between perceived organizational support and job burnout among college mental health teachers. Methods A total of 361 college mental health teachers were selected as the study subjects using the convenience and snowball sampling methods. The Perceived Organizational Support Scale, Stress Mindset Scale, and Maslach Burnout Inventory were used to assess their perceived organizational support, stress-is-enhancing mindset, and job burnout level, respectively. Results The median (25th, 75th percentiles) scores for perceived organizational support, stress-is-enhancing mindset, and job burnout of teachers were 4.1 (3.4,5.1), 2.0 (1.9,2.4), and 1.2 (0.9,1.4), respectively. The detection rate of job burnout was 15.5%. Both perceived organizational support and stress-is-enhancing mindset of the participa were negatively correlated with job burnout [Spearman's rank correlation coefficient (r_S) was -0.40 and -0.45; all P<0.01], while perceived organizational support was positively correlated with stress-is-enhancing mindset (r_S = 0.25, P<0.01). The stress-is-enhancing mindset partially mediated the relationship between perceived organizational support and job burnout, with an effect size of -0.95 (95% confidence interval: -1.55 to -0.47), accounting for 28.0% of the total effect. Conclusion Stress-is-enhancing mindset plays a mediating role between perceived organizational support and job burnout among college mental health teachers.

AIM: To compare the agreement between the ARK Biometer Combo and OA 2000 in patients wearing orthokeratology lenses.METHODS: A prospective study. A total of 148 patients(148 eyes)who were wearing orthokeratology lenses and returned for follow-up at the Shanghai Eye Disease Prevention and Treatment Center from August to September 2024 were included. Biometric measurements were performed using both the ARK Biometer Combo and OA 2000. Parameters including axial length(AL), corneal central thickness(CCT), anterior chamber depth(ACD), lens thickness(LT), corneal curvature(Kf and Ks), astigmatism(AST), white-to-white corneal diameter(WTW)and pupil diameter(PD)were obtained. Differences in measurement parameters between the two biometers were compared, and agreement was assessed.RESULTS: There were no statistically significant differences in the measurements of Kf, Ks and AST between the two biometers(P>0.05). Statistically significant differences were found in the measurements of AL, CCT, ACD, LT, WTW and PD(t=2.559, P=0.012; t=16.771, P<0.0001; t=4.749, P<0.0001; t=-15.212, P<0.0001; t=-14.915, P<0.0001; t=-2.402, P=0.018). ICC ranged from 0.615 to 0.999. Bland-Altman analysis showed that the maximum absolute values of the 95% limits of agreement(LoA)of AL, CCT, ACD, LT, Kf, Ks, AST, WTW and PD were 0.07 mm, 35.07 μm, 0.07 mm, 0.12 mm, 0.66 D, 1.14 D, 1.00 D, 0.76 mm, and 0.98 mm, respectively.CONCLUSION: In orthokeratology patients, the ARK Biometer Combo and OA 2000 showed good agreement in measuring AL, CCT, ACD, Kf and LT, and can be used interchangeably.

Background Existing studies have confirmed that fine particulate matter (PM_2.5)is one of the important factors inducing pulmonary fibrosis. Pulmonary fibrosis is the terminal stage of a major category of lung diseases characterized by the destruction of tissue structure, and eventually leading lung ventilation and ventilation dysfunction. No effective pulmonary fibrosis treatment is available yet. Objective To investigate the protective effect of salidroside on pulmonary fibrosis induced by the exposure of PM_2.5 and its molecular mechanism. Methods Seventy 7-week-old male C57BL/6 mice were randomly divided into four groups: control group (intratracheal instillation of normal saline + saline by gavage, n=25), Sal group (intratracheal instillation of normal saline + Sal 60 mg·kg⁻¹ by gavage, n=10), PM_2.5 group (intratracheal instillation of PM_2.5 5 mg·kg⁻¹ + saline by gavage, n=10), and Sal + PM_2.5 group (intratracheal instillation of PM_2.5 5 mg·kg⁻¹ +Sal 60 mg·kg⁻¹ by gavage, n=10). The mice were administered by gavage once daily, intratracheal instillation once every 3 d, and every 3 d constituted an experimental cycle. At the end of the 26-30th cycles, 3 mice in the control group and 3 mice in the PM_2.5 group were randomly sacrificed, and the lung tissues were collected for Masson staining to verify whether the pulmonary fibrosis model was successfully established. After 30 cycles, the model was successfully constructed. After 1 week of continuous observation, the mice were sacrificed, and the blood and lung tissues of the mice were collected to make lung tissue sections. Assay kits were correspondingly employed to detect oxidative stress indicators such as serum malondialdehyde (MDA) and superoxide dismutase (SOD). Western blotting was used to detect the expression of fibrosis-related proteins (Collagen-III, α-SMA), mitochondrial dynamics-related proteins (MFN1, Drp1), and mitophagy-related proteins (PINK1, Parkin, and LC3). Results Compared with the control group, the weight gain rate of the PM_2.5 group was slowed down (P<0.05), which was alleviated by the Sal intervention (P<0.05). The lung coefficient increased after the PM_2.5 exposure (P<0.05), which was alleviated by Sal intervention. Compared with the control group, the PM_2.5 group showed severe alveolar structure damage, inflammatory cell infiltration, and blue collagen deposition, and significantly increased the lung injury score, collagen volume fraction (CVF), Szapiel score, and Ashcroft score (P<0.05), as well as serum oxidative stress levels (P<0.05). The protein expression levels of Collagen-III, α-SMA, Drp1, PINK1, Parkin, and LC3 II/I were increased (P<0.05), and the expression of MFN1 was decreased (P<0.05). Compared with the PM_2.5 group, the Sal intervention alleviated lung injury, reduced inflammatory cell infiltration and collagen deposition, showing decreased lung injury score, CVF, Szapiel score, and Ashcroft score (P<0.05), and decreased serum oxidative stress levels (P<0.05); the protein expression levels of Collagen-III, α-SMA, PINK1, Parkin, and LC3 II/I were decreased (P<0.05), the expression level of Drp1 was decreased, and the expression level of MFN1 was increased. Conclusion In the process of pulmonary fibrosis induced by PM_2.5 exposure in mice, Sal may affect mitochondrial autophagy through PINK1/Parkin pathway and play a protective role. The specific mechanism needs to be further verified.

ObjectiveBased on the concept of quality by design（QbD）， the processing process of calcined Pyritum was optimized， and its X-ray diffraction（XRD） fingerprint was established. MethodsThe safety， effectiveness and quality controllability of calcined Pyritum were taken as the quality profile（QTPP）， the color， hardness， metallic luster， phase composition， the contents of heavy metals and hazardous elements were taken as the critical quality attributes（CQAs）， and the calcination temperature， calcination time， paving thickness and particle size were determined as the critical process parameters（CPPs）. Differential thermal analysis， X-ray diffraction（XRD） and inductively coupled plasma mass spectrometry（ICP-MS） were used to analyze the correlation between the calcination temperature and CQAs of calcined Pyritum. Then， based on the criteria importance through intercriteria correlation（CRITIC）-entropy weight method， the optimal processing process of calcined Pyritum was optimized by orthogonal test. Powder XRD was used to analyze the phase of calcined Pyritum samples processed according to the best process， and the mean and median maps of calcined Pyritum were established by the superposition of geometric topological figures， and similarity evaluation and cluster analysis were carried out. ResultsThe results of single factor experiments showed that the physical phase of Pyritum changed from FeS₂ to Fe₇S₈ during the process of temperature increase， the color gradually deepened from dark yellow， and the contents of heavy metals and harmful elements decreased. The optimized processing process of calcined Pyritum was as follows：calcination temperature at 750 ℃， calcination time of 2.5 h， paving thickness of 3 cm， particle size of 0.8-1.2 cm， vinegar quenching 1 time［Pyritum-vinegar（10∶3）］. After calcination， the internal structure of Pyritum was honeycomb-shaped， which was conducive to the dissolution of active ingredients. XRD fingerprints of 13 batches of calcined Pyritum characterized by 10 common peaks were established. The similarities of the relative peak intensities of the XRD fingerprints of the analyzed samples were>0.96， and it could effectively distinguish the raw products and unqualified products. ConclusionTemperature is the main factor affecting the quality of calcined Pyritum. After processing， the dissolution of the effective components in Pyritum increases， and the contents of heavy metals and harmful substances decrease， reflecting the function of processing to increase efficiency and reduce toxicity. The optimized processing process is stable and feasible， and the established XRD fingerprint can be used as one of the quality control standards of calcined Pyritum.

ObjectiveBased on the concept of quality by design（QbD）， the processing process of calcined Pyritum was optimized， and its X-ray diffraction（XRD） fingerprint was established. MethodsThe safety， effectiveness and quality controllability of calcined Pyritum were taken as the quality profile（QTPP）， the color， hardness， metallic luster， phase composition， the contents of heavy metals and hazardous elements were taken as the critical quality attributes（CQAs）， and the calcination temperature， calcination time， paving thickness and particle size were determined as the critical process parameters（CPPs）. Differential thermal analysis， X-ray diffraction（XRD） and inductively coupled plasma mass spectrometry（ICP-MS） were used to analyze the correlation between the calcination temperature and CQAs of calcined Pyritum. Then， based on the criteria importance through intercriteria correlation（CRITIC）-entropy weight method， the optimal processing process of calcined Pyritum was optimized by orthogonal test. Powder XRD was used to analyze the phase of calcined Pyritum samples processed according to the best process， and the mean and median maps of calcined Pyritum were established by the superposition of geometric topological figures， and similarity evaluation and cluster analysis were carried out. ResultsThe results of single factor experiments showed that the physical phase of Pyritum changed from FeS₂ to Fe₇S₈ during the process of temperature increase， the color gradually deepened from dark yellow， and the contents of heavy metals and harmful elements decreased. The optimized processing process of calcined Pyritum was as follows：calcination temperature at 750 ℃， calcination time of 2.5 h， paving thickness of 3 cm， particle size of 0.8-1.2 cm， vinegar quenching 1 time［Pyritum-vinegar（10∶3）］. After calcination， the internal structure of Pyritum was honeycomb-shaped， which was conducive to the dissolution of active ingredients. XRD fingerprints of 13 batches of calcined Pyritum characterized by 10 common peaks were established. The similarities of the relative peak intensities of the XRD fingerprints of the analyzed samples were>0.96， and it could effectively distinguish the raw products and unqualified products. ConclusionTemperature is the main factor affecting the quality of calcined Pyritum. After processing， the dissolution of the effective components in Pyritum increases， and the contents of heavy metals and harmful substances decrease， reflecting the function of processing to increase efficiency and reduce toxicity. The optimized processing process is stable and feasible， and the established XRD fingerprint can be used as one of the quality control standards of calcined Pyritum.