Based on the theory of "sweet-flavored medicinals retaining and restoring body fluid"， this paper proposed that the core pathogenesis of hypercoagulable state in malignant tumors is qi deficiency and fluid consumption， blood stasis and vessels stagnation， which evolves dynamically according to the pattern "qi deficiency → fluid consumption → blood stasis". Accordingly， a staged treatment system is established with the general principle of "fortifying the middle jiao， restoring fluid and activating blood circulation". In the initial stage， invigorating the spleen and boosting qi to generate body fluid， targeting the onset of middle jiao deficiency and body fluid consumption； in the middle stage， nourishing yin and unblocking collaterals to facilitate body fluid circulation， addressing the disorder of body fluid transportation and collateral injury caused by internal dryness； in the late stage， consolidating yin and resolving blood stasis to retain body fluid， resolving yin impairment， fluid exhaustion， and binding of stasis and toxin. By regulating body fluid metabolism to improve the hypercoagulable state， this system is intended to provide insights for the prevention and treatment of hypercoagulable state in malignant tumors with traditional Chinese medicine.

Objective:To analyze the reoperation rate and causes during the early adoption phase of unilateral biportal endoscopy (UBE).Methods:The clinical data of 180 patients who underwent UBE performed by a single surgeon at Beijing Friendship Hospital, Capital Medical University from October 2021 to June 2023 were retrospectively analyzed. Clinical and imaging data of patients who underwent reoperation were collected to analyze the causes of reoperation, and the clinical efficacy of the reoperations was also followed up. Measurement data were expressed as mean ± standard deviation ( ± s), and t-test was used before and after treatment. Results:A total of 180 patients who underwent UBE were included in this study, of which 6 patients underwent reoperation, and the reoperation rate was 3.33%. Among them, 3 cases occurred in the first 90 surgeries and the other 3 occurred in the subsequent 90 surgeries. The causes of reoperation were as follows: recurrent lumbar disc herniation at the same segment postoperatively in 2 cases, insufficient decompression in 2 cases, disc herniation following isolated decompression in 1 case, and immediate postoperative perianal numbness in 1 case. The time between the initial surgery and reoperation ranged from 0 to 187 days, with an average of 63.3 days. The average follow-up time after reoperation was 18.3 months. The visual analogue scale (VAS) and Oswestry disability index (ODI) scores of the patients at the last follow-up were significantly improved compared with those before operation (VAS score of low back pain: 5.2 ± 1.7 before operation, 1.2 ± 0.8 at the last follow-up, P<0.001; VAS score of leg pain: 7.2 ± 1.5 before operation, 1.2 ± 1.2 at the last follow-up, P<0.001; ODI score: 67.3 ± 5.7 before operation, 20.2 ± 8.2 at the last follow-up, P<0.001). The postoperative modified MacNab scores were generally satisfactory (4 cases were rated as excellent, accounting for 66.7%; 2 cases were rated as good, accounting for 33.3%). Except for one patient who experienced dural injury during open revision surgery, there were no serious complications such as nerve damage. Conclusions:In the early stages of UBE surgery, recurrent lumbar disc herniation and inadequate decompression are the primary reasons for reoperation, typically occurring within the first three months postoperatively. Reoperation does not significantly increase the risk of nerve injury. Enhanced early postoperative follow-up is recommended. For symptomatic patients, a second surgery with thorough decompression can yield satisfactory treatment outcomes.

Schizophrenia (SZ) stands as a severe psychiatric disorder. This study applied diffusion tensor imaging (DTI) data in conjunction with graph neural networks to distinguish SZ patients from normal controls (NCs) and showcases the superior performance of a graph neural network integrating combined fractional anisotropy and fiber number brain network features, achieving an accuracy of 73.79% in distinguishing SZ patients from NCs. Beyond mere discrimination, our study delved deeper into the advantages of utilizing white matter brain network features for identifying SZ patients through interpretable model analysis and gene expression analysis. These analyses uncovered intricate interrelationships between brain imaging markers and genetic biomarkers, providing novel insights into the neuropathological basis of SZ. In summary, our findings underscore the potential of graph neural networks applied to multimodal DTI data for enhancing SZ detection through an integrated analysis of neuroimaging and genetic features.
Humans ; Schizophrenia/pathology* ; Diffusion Tensor Imaging/methods* ; Male ; Female ; Adult ; Brain/metabolism* ; Young Adult ; Middle Aged ; White Matter/pathology* ; Gene Expression ; Nerve Net/diagnostic imaging* ; Graph Neural Networks

Objective:To analyze the learning curve of TiRobot-assisted lumbar pedicle screw fixation (LPSF) by cumulative sum (CUSUM) test method.Methods:The clinical data of 50 patients who underwent TiRobot-assisted LPSF from January 2020 to December 2022 in Beijing Friendship Hospital, Capital Medical University were retrospectively analyzed. CUSUM analysis and learning curve fitting were performed with robot usage time as the main indicator with the time for each step refined (robot registration time, path planning time and guide wire placement time), to select the best learning curve fitting model with the R2 value closest to 1. Using the turning point of the learning curve as the boundary, the learning curve was divided into two stages as learning stage and maturity stage, and then the observation indexes were compared between the two stages. Results:All 50 patients successfully completed the surgery without perioperative complications, with a total of 244 pedicle screws implanted. The total robot usage time and robot registration time showed a gradually decreasing trend with the increase of case number, and the learning curves were successfully fitted and reached their peaks at the seventeenth and thirteenth cases respectively. The entire learning process was divided into learning stage (17 cases) and maturity stage (33 cases) based on the turning point of the learning curve of total robot usage time. The path planning time and guide wire placement time did not show significant changes with the increase in the case number. The total robot usage time, robot registration time and the intraoperative blood loss in the learning stage were significantly higher than those in the maturity stage: (35.35 ± 1.58) min vs. (30.61 ± 0.43) min, (20.83 ± 1.56) min vs. (14.94 ± 0.29) min and 400 (150, 500) ml vs. 200 (110, 300) ml, the guide wire placement time of per screw was significantly lower than that in the maturity stage: 2.00 (1.83, 2.34) min/screw vs. 2.33 (2.13, 2.69) min/screw, and there were statistical differences ( P<0.05 or <0.01). There were no statistical difference in the path planning time, path planning time of per screw, guide wire placement time and the accuracy of screw placement between two stages ( P>0.05). Conclusions:TiRobot-assisted LPSF is a new technology with safety and effectiveness, and it has a relatively short learning curve. To achieve technological maturity, at least 17 surgeries are required with accumulated experience, and the robot registration is the main step of the learning process. After reaching maturity stage, the robot usage time is significantly shortened and intraoperative trauma is significantly reduced while the relatively high screw placement accuracy is ensured.

Objective:To evaluate the safety and efficacy of the TiRobot assisted screw placement in patients with lumbar degenerative diseases.Methods:The clinical data of 165 patients with lumbar degenerative diseases from January 2020 to December 2022 in Beijing Friendship Hospital, Capital Medical University were retrospectively analyze, and all patients were treated with posterior lumbar decompression and instrumentation. Among them, 46 patients were used the TiRobot assisted screw placement during surgery (robotic-assisted group), and 119 patients underwent freehand screw placement by C-arm X-ray machine fluoroscopy (freehand group). The operation time, intraoperative blood loss, complication and skelalgia visual analogue scale (VAS), Oswestry disability index (ODI) before and after operation were recorded. The accuracy of screw placement and rate of proximal facet joint violation were compared between two groups.Results:There were no statistical difference in operation time, intraoperative blood loss and incidence of complication between two groups ( P>0.05). In the two groups, the 3 d VAS and ODI after operation were significantly lower than those before operation, robot-assisted group: (3.33 ± 1.40) scores vs. (6.54 ± 2.00) scores and (16.96 ± 8.03) scores vs. (43.09 ± 5.48) scores; freehand group: (3.56 ± 1.29) scores vs. (6.55 ± 1.65) scores and (18.89 ± 6.74) scores vs. (44.91 ± 4.96) scores, and there were statistical differences ( P<0.01); there were no statistical difference in VAS and ODI before operation and 3 d after operation between two groups ( P>0.05). A total of 234 screws were implanted in robot-assisted group, and 590 screws were implanted in freehand group. The accuracy of screw placement in robot-assisted group was significantly higher than that in freehand group: 80.77% (189/234) vs. 74.58% (440/590), the rate of proximal facet joint violation was significantly lower than that in freehand group: 2.56% (6/234) vs. 7.29% (43/590), and there were statistical differences ( χ2 = 3.56 and 6.68, P<0.05). Conclusions:The TiRobot assisted screw placement for lumbar degenerative diseases is safe and effective. Compared to freehand technique, the TiRobot assisted method demonstrates higher screw placement accuracy and a lower rate of proximal facet joint violation.

Objective:To analyze the learning curve of TiRobot-assisted lumbar pedicle screw fixation (LPSF) by cumulative sum (CUSUM) test method.Methods:The clinical data of 50 patients who underwent TiRobot-assisted LPSF from January 2020 to December 2022 in Beijing Friendship Hospital, Capital Medical University were retrospectively analyzed. CUSUM analysis and learning curve fitting were performed with robot usage time as the main indicator with the time for each step refined (robot registration time, path planning time and guide wire placement time), to select the best learning curve fitting model with the R2 value closest to 1. Using the turning point of the learning curve as the boundary, the learning curve was divided into two stages as learning stage and maturity stage, and then the observation indexes were compared between the two stages. Results:All 50 patients successfully completed the surgery without perioperative complications, with a total of 244 pedicle screws implanted. The total robot usage time and robot registration time showed a gradually decreasing trend with the increase of case number, and the learning curves were successfully fitted and reached their peaks at the seventeenth and thirteenth cases respectively. The entire learning process was divided into learning stage (17 cases) and maturity stage (33 cases) based on the turning point of the learning curve of total robot usage time. The path planning time and guide wire placement time did not show significant changes with the increase in the case number. The total robot usage time, robot registration time and the intraoperative blood loss in the learning stage were significantly higher than those in the maturity stage: (35.35 ± 1.58) min vs. (30.61 ± 0.43) min, (20.83 ± 1.56) min vs. (14.94 ± 0.29) min and 400 (150, 500) ml vs. 200 (110, 300) ml, the guide wire placement time of per screw was significantly lower than that in the maturity stage: 2.00 (1.83, 2.34) min/screw vs. 2.33 (2.13, 2.69) min/screw, and there were statistical differences ( P<0.05 or <0.01). There were no statistical difference in the path planning time, path planning time of per screw, guide wire placement time and the accuracy of screw placement between two stages ( P>0.05). Conclusions:TiRobot-assisted LPSF is a new technology with safety and effectiveness, and it has a relatively short learning curve. To achieve technological maturity, at least 17 surgeries are required with accumulated experience, and the robot registration is the main step of the learning process. After reaching maturity stage, the robot usage time is significantly shortened and intraoperative trauma is significantly reduced while the relatively high screw placement accuracy is ensured.

Objective:To evaluate the safety and efficacy of the TiRobot assisted screw placement in patients with lumbar degenerative diseases.Methods:The clinical data of 165 patients with lumbar degenerative diseases from January 2020 to December 2022 in Beijing Friendship Hospital, Capital Medical University were retrospectively analyze, and all patients were treated with posterior lumbar decompression and instrumentation. Among them, 46 patients were used the TiRobot assisted screw placement during surgery (robotic-assisted group), and 119 patients underwent freehand screw placement by C-arm X-ray machine fluoroscopy (freehand group). The operation time, intraoperative blood loss, complication and skelalgia visual analogue scale (VAS), Oswestry disability index (ODI) before and after operation were recorded. The accuracy of screw placement and rate of proximal facet joint violation were compared between two groups.Results:There were no statistical difference in operation time, intraoperative blood loss and incidence of complication between two groups ( P>0.05). In the two groups, the 3 d VAS and ODI after operation were significantly lower than those before operation, robot-assisted group: (3.33 ± 1.40) scores vs. (6.54 ± 2.00) scores and (16.96 ± 8.03) scores vs. (43.09 ± 5.48) scores; freehand group: (3.56 ± 1.29) scores vs. (6.55 ± 1.65) scores and (18.89 ± 6.74) scores vs. (44.91 ± 4.96) scores, and there were statistical differences ( P<0.01); there were no statistical difference in VAS and ODI before operation and 3 d after operation between two groups ( P>0.05). A total of 234 screws were implanted in robot-assisted group, and 590 screws were implanted in freehand group. The accuracy of screw placement in robot-assisted group was significantly higher than that in freehand group: 80.77% (189/234) vs. 74.58% (440/590), the rate of proximal facet joint violation was significantly lower than that in freehand group: 2.56% (6/234) vs. 7.29% (43/590), and there were statistical differences ( χ2 = 3.56 and 6.68, P<0.05). Conclusions:The TiRobot assisted screw placement for lumbar degenerative diseases is safe and effective. Compared to freehand technique, the TiRobot assisted method demonstrates higher screw placement accuracy and a lower rate of proximal facet joint violation.

Bone organoids can simulate the complex structure and function of the bone tissues, which makes them a frontier technology in organoid researches. Bone organoids show a tremendous potential of applications in bone disease modeling, bone injury repair, and medicine screening. Although advancements have been made so far in constructing bone organoids with functional structures like mineralization, bone marrow, trabecular bone, callus, woven bone, etc, the researches in this field are confronted with numerous challenges such as lack of standardized construction strategies and unified evaluation criteria, which limits their further promotion and application. To standardize researches in bone organoids, the Orthopedic Expert Committee of Geriatric Branch of Chinese Association of Gerontology and Geriatrics, the Youth Osteoporosis Group of Orthopedic Branch of Chinese Medical Association, the Osteoporosis Group of Orthopedic Surgeon Branch of Chinese Medical Doctor Association, and the Osteoporosis Committee of Shanghai Association of Integrated Traditional Chinese and Western Medicine organized related experts to formulate Expert consensus on the construction, evaluation, and application of bone organoids ( version 2024) based on an evidence-based approach. A total of 17 recommendations were put forth, aiming to standardize researches and clinical applications of bone organoids and enhance their value in scientific research and clinical practice.

Adjacent segment disease(ASD) refers to the degeneration of adjacent segments after lumbar fusion surgery, including intervertebral disc herniation, stress vertebral fractures, slippage, segmental scoliosis, spinal canal stenosis, and facet joint degeneration, which can lead to corresponding clinical symptoms such as lumbosacral pain, root lower limb pain, or intermittent claudication. The treatment of different pathological types of ASD varies. The patients with mild symptoms require conservative treatment and patients with severe symptoms require surgical treatment. In the past, open fusion surgery with posterior approach or intervertebral foramen approach was commonly used for surgical treatment, which had definite therapeutic effects. However, there were drawbacks such as large surgical trauma, excessive intraoperative blood loss, and slow postoperative recovery. With the booming development of minimally invasive spinal surgery technology in recent years, spinal surgeons actively use minimally invasive surgery for the treatment of ASD. It has advantages such as less bleeding, short hospital stay, fast recovery, and fewer complications (such as deep vein thrombosis and pulmonary embolism), but its indications are limited. Therefore, this article provides a reference for the choice of ASD treatment by reviewing the treatment modalities of ASD with different pathological types.

Objective:To compare the test methods for aluminum content determination in vaccines by inductively coupled plasma-mass spectrometry(ICP-MS),inductively coupled plasma optical emission spectrometry(ICP-OES)and titration of the Chinese Pharmacopoeia 2020.Methods:The pre-treatment procedures,linearity,repeatability,accuracy,quantification limit,detection limit and sample determination results of the three methods were compared and analyzed by methodological verification and sample testing.Results:There was a good linear relationship of ICP-OES in the concentration range of 1-20μg·mL-1 aluminum content,r=0.9999.Aluminum content in 6 types of vaccines was in the range of 99％-104.6％,and RSDs were lower than 3％(n=9).There was a good linear relationship of ICP-MS in the concentration range of 2.5-80ng·mL-1(r=0.999).Aluminum content in 6 types of vaccines were in the range of 99.4％-108.9％,and RSDs were lower than 8％(n=9).There was no significant difference between the three methods in the determination of aluminum content in vaccines,and RSDs were lower than 10％.Conclusion:Both ICP-MS and ICP-OES methods can be used for the determination of alu-minum content in aluminum adjuvant vaccine.Both detection methods are simple,fast and accurate.ICP-OES has lower instrument costs and is easier to promote in the laboratory.