Objective To investigate the dosimetric difference between manual and inverse optimization in 3-dimensional (3D) brachytherapy for gynecologic tumors. Methods This retrospective study was conducted among a total of 110 patients with gynecologic tumors undergoing intracavitary combined with interstitial brachytherapy or interstitial brachytherapy. Based on the original images, the brachytherapy plans were optimized for each patient using Gro, IPSA1, IPSA2 (with increased volumetric dose limits on the basis of IPSA1) and HIPO algorithms. The dose-volume histogram (DVH) parameters of the clinical target volume (CTV) including V200, V150, V100, D90, D98 and CI, and the dosimetric parameters D2cc, D1cc, and D0.1cc for the bladder, rectum, and sigmoid colon were compared among the 4 plans. Results Among the 4 plans, Gro optimization took the longest time, followed by HIPO, IPSA2 and IPSA1 optimization. The mean D90, D98, and V100 of HIPO plans were significantly higher than those of Gro and IPSA plans, and D90 and V100 of IPSA1, IPSA2 and HIPO plans were higher than those of Gro plans (P<0.05), but the CI of the 4 plans were similar (P>0.05). For the organs at risk (OARs), the HIPO plan had the lowest D2cc of the bladder and rectum;the bladder absorbed dose of Gro plans were significantly greater than those of IPSA1 and HIPO (P<0.05). The D2cc and D1cc of the rectum in IPSA1, IPSA2 and HIPO plans were better than Gro (P<0.05). The D2cc and D1cc of the sigmoid colon did not differ significantly among the 4 plans. Conclusion Among the 4 algorithms, the HIPO algorithm can better improve dose coverage of the target and lower the radiation dose of the OARs, and is thus recommended for the initial plan optimization. Clinically, the combination of manual optimization can achieve more individualized dose distribution of the plan.

Objective To investigate the dosimetric difference between manual and inverse optimization in 3-dimensional (3D) brachytherapy for gynecologic tumors. Methods This retrospective study was conducted among a total of 110 patients with gynecologic tumors undergoing intracavitary combined with interstitial brachytherapy or interstitial brachytherapy. Based on the original images, the brachytherapy plans were optimized for each patient using Gro, IPSA1, IPSA2 (with increased volumetric dose limits on the basis of IPSA1) and HIPO algorithms. The dose-volume histogram (DVH) parameters of the clinical target volume (CTV) including V200, V150, V100, D90, D98 and CI, and the dosimetric parameters D2cc, D1cc, and D0.1cc for the bladder, rectum, and sigmoid colon were compared among the 4 plans. Results Among the 4 plans, Gro optimization took the longest time, followed by HIPO, IPSA2 and IPSA1 optimization. The mean D90, D98, and V100 of HIPO plans were significantly higher than those of Gro and IPSA plans, and D90 and V100 of IPSA1, IPSA2 and HIPO plans were higher than those of Gro plans (P<0.05), but the CI of the 4 plans were similar (P>0.05). For the organs at risk (OARs), the HIPO plan had the lowest D2cc of the bladder and rectum;the bladder absorbed dose of Gro plans were significantly greater than those of IPSA1 and HIPO (P<0.05). The D2cc and D1cc of the rectum in IPSA1, IPSA2 and HIPO plans were better than Gro (P<0.05). The D2cc and D1cc of the sigmoid colon did not differ significantly among the 4 plans. Conclusion Among the 4 algorithms, the HIPO algorithm can better improve dose coverage of the target and lower the radiation dose of the OARs, and is thus recommended for the initial plan optimization. Clinically, the combination of manual optimization can achieve more individualized dose distribution of the plan.

Objective:To prepare the whole bladder acellular matrix (BAM) using the self-designed perfusion decellularization system, and evaluate the feasibility of constructing the tissue engineering bladder with the adipose-derived stem cells (ADSCs).Methods:This study was conducted from October 2020 to April 2021. The self-designed perfusion decellularization system was used, and four different decellularization protocols (group A, group B, group C and group D) were formulated, according to the flow direction of the perfusate and the action time of different decellularization solutions. Among them, the urethral orifice of the bladder tissue was used as the outflow tract of the perfusion fluid in groups A and B. The top of the bladder was cut off and used as the outflow tract of the perfusion fluid in groups C and D. In groups A and C, 1% Triton X-100 was treated for 6 h, and 1% sodium dodecyl sulfate (SDS) was treated for 2 h. In groups B and D, 1% Triton X-100 was treated for 7 h, and 1% sodium dodecyl sulfate (SDS) was treated for 1 h. In addition, the tissue in the normal bladder group was directly obtained from the natural bladder tissue, which did not require perfusion, cryopreservation and thawing. The fast and efficient decellularization protocol was screened out through HE, DAPI, Masson trichrome and Alcian Blue staining and quantitative analyses to prepare the whole bladder scaffold. The prepared BAM was used as the scaffold material, and the ADSCs were used as the seeding cells to construct the tissue engineering bladder. HE and DAPI staining were used to observe the distribution of ADSCs on the BAM.Results:HE and DAPI staining showed that there was no obvious nuclear residue in the group C. Masson trichrome and Alcian Blue staining showed that the collagen structure and glycosaminoglycan were well preserved in the group C. There was no significant difference in bladder wall thickness between the group C and the normal bladder group [(975.44±158.62)μm vs.(1 064.49±168.52)μm, P > 0.05]. The DNA content in the group C [(43.59 ±4.59) ng/mg] was lower than that in the normal bladder group, group A, group B and group D [(532.50±26.69), (135.17±6.99), (182.49±13.69) and(84.00±4.38)ng/mg], and the difference was statistically significant ( P<0.05). The collagen content [(10.98 ± 0.29)μg/mg] and glycosaminoglycan content [(2.30±0.18)μg/mg] in group C were not significantly different with those in the normal bladder group [(11.69±0.49) and (2.36±0.09)μg/mg, P>0.05]. Scanning electron microscopy showed that a large number of pore structures could be observed on the surface of the prepared BAM in groups A-D and were facilitated to cell adhesion. The isolated and cultured ADSCs were identified by flow cytometry to confirm the positive expression of CD90 and CD29, and the negative expression of CD45 and CD106. Live/dead staining and CCK-8 detection confirmed that the prepared BAM in the group C had no cytotoxicity. HE and DAPI staining showed that a large number of ADSCs were distributed on the surface and inside of the tissue engineering bladder. Conclusions:The whole bladder shape BAM prepared by the self-designed perfusion decellularization system could be used as the scaffold material for bladder tissue engineering, and the constructed tissue engineering bladder could be used for bladder repair and reconstruction.

Objective:This study aimed to investigate the physical properties, biocompatibility, and 3D printing performance of a novel hybrid bioink composed of gelatin methacrylated (GelMA) and chitin nanocrystal (ChiNC).Methods:The study was conducted from May 2021 to December 2022, four different bioinks were prepared by adding varying amounts of ChiNC to GelMA bioink. The GelMA concentration in all four bioinks was 100 mg/ml, while the ChiNC concentrations were 0 mg/ml (no ChiNC added), 5 mg/ml, 10 mg/ml, and 20 mg/ml, respectively, named as GC0, GC5, GC10, and GC20 bioinks. The cross-sectional morphology of the hydrogels formed after photocuring the four bioinks was observed using scanning electron microscopy, and the porosity was calculated. Weighing the hydrogels before and after swelling, and then calculate the equilibrium swelling rate. HUVECs were seeded on the surfaces of the hydrogels prepared from the four bioinks and cultured in medium. Cell proliferation was assessed using CCK-8 assays at 1d, 3d, and 7d to compare the proliferation rates of cells on the four hydrogels. HUVECs were added to the four bioinks, and grid-like scaffolds were printed and cultured in medium. Live-Dead staining was performed at 1d and 7d to observe cell viability. Compare the printing effect of bioinks by observing its forming continuous threads properties during extrusion. Finally, tissue-engineered bladder patches simulating the mucosal layer, submucosal layer, and muscular layer anatomical structures of the bladder wall were 3D bioprinted using the optimized bioink composition, and the stability and fidelity of the printed structures were observed to further validate the feasibility of printing multi-layered complex structures with the bioink.Results:Scanning electron microscopy revealed that the porosity of the GC0, GC5, GC10, and GC20 hydrogels were (51.43±6.23)%, (51.85±6.47)%, (50.55±4.59)%, and (42.49±2.20)%, respectively. The differences in porosity between the GC0 group and the other three groups were not statistically significant ( P=0.9994, P=0.9948, P=0.1200). The equilibrium swelling ratio of the other three groups [(8.81±0.41), (7.95±0.19), (7.71±0.14)] was significantly lower than that of the GC0 group (9.37 ± 0.49), and the differences were statistically significant ( P=0.0457, P<0.01, P<0.01). CCK-8 assay showed no significant difference in absorbance value between the GC10 group (0.360±0.009) and the GC0 group (0.357±0.007), GC5 group (0.350±0.012), and GC20 group (0.345±0.018) on the first day ( P=0.9332, P=0.5464, P=0.4937). However, on the third day, the absorbance value of the GC10 group (0.755±0.012) was significantly higher than that of the GC0 group (0.634±0.010), GC5 group (0.704±0.009), and GC20 group (0.653±0.015) ( P<0.01, P=0.0033, P=0.0002). On the seventh day, the absorbance value of the GC10 group (1.001±0.031) was significantly higher than that of the GC0 group (0.846±0.026), GC5 group (0.930±0.043), and GC20 group (0.841±0.024)( P=0.0012, P=0.1390, P=0.0010). The addition of human umbilical vein endothelial cells (HUVECs) into the four groups of hydrogels enabled the printing of grid-like scaffolds, and Live-Dead staining was performed on day 1 and day 7. The cell viability of HUVECs in the four groups on day 1 was (90.13±1.63)%, (90.6±2.45)%, (92.58±2.15)%, and (91.40±3.17)%, respectively. There were no statistically significant differences between the GC0 group and the other three groups ( P=0.9869, P=0.3093, P=0.8008). On day 7, the cell viability was (89.97±3.10)%, (92.18±2.21)%, (92.05±2.25)%, and (90.12±1.97)% for the four groups, respectively. There were no statistically significant differences between the GC0 group and the other three groups ( P=0.3965, P=0.4511, P=0.9995). Bioink extrusion test showed that the GC0 hydrogel could be extruded continuously and form threads at temperatures between 24℃ and 25℃, while the GC10 hydrogel could be extruded continuously and form threads at temperatures between 24℃ and 27℃. Printing tissue engineered bladder patches simulating the anatomical structure of the bladder mucosal layer, submucosal layer, and muscular layer using GC10 bioink, and the printed patches were stable, without collapse, and had high fidelity. Conclusions:Adding ChiNC to GelMA promotes cell adhesion, proliferation, and expands the printing window of GelMA bioink. The biocompatibility of the mixed bioink prepared by adding 10 mg/ml ChiNC in GelMA is good, capable of printing tissue-engineered bladder patches that mimic the anatomical structure of natural bladder walls.

Objective:To investigate the effect of tissue engineered bladder patch constructed by double-layer silk scaffold and adipose-derived stem cells (ADSCs) in the repair and reconstruction of bladder.Methods:This study was conducted from May 2020 to March 2021. The silk fibroin (SF) aqueous solution was obtained from silkworm cocoons, and a double-layer silk scaffold composed of silk fibroin film and silk fibroin sponge was further prepared. The rat ADSCs were isolated, cultured, and the ADSCs surface markers (CD29, CD90, CD45, CD106) were identified by flow cytometry. The ADSCs were planted on a double-layer silk scaffold to construct a tissue-engineered bladder patch. Thirty-six male SD rats were randomly divided into three groups: tissue engineered bladder patch group (SF-ADSCs group, n=15), double-layer silk scaffold group (SF group, n=15), control group ( n=6). The tissue engineered bladder patch (SF-ADSCs group) and double-layer silk scaffold (SF group) were wrapped on the omentum to promote vascularization. The vascularization was evaluated by HE and immunofluorescence staining. The wrapped tissue engineered bladder patch and double-layer silk scaffold were used to repair the defective bladder. In the control group (six rats), the incision was closed immediately after the bladder tissue fully exposed. At 4 weeks and 12 weeks after operation, the general morphology of bladder tissue and cystography were performed to evaluate the recovery of bladder morphology. After the graft was harvested, HE and Masson's trichrome staining and immunofluorescence staining were used to observe the regeneration of bladder wall tissue. Urodynamics was used to assess the recovery of bladder function at 12 weeks after operation. Results:The flow cytometry results confirmed that the isolated cells positively expressed CD29 and CD90, and there was no significant expression of CD45 and CD106. Gross observation and scanning electron microscope confirmed that the preparation of double-layer silk scaffold not only had a pore structure that was conducive to cell planting, but also had good toughness and was facilitated to surgical suture. The number (43.50±2.66) and area (0.73±0.03)% of vascular-like structures in the SF-ADSCs group after the omentum encapsulation was significantly higher than that in the SF group [(24.50±3.51), (0.55±0.05)%], and the difference was statistically significant ( P<0.05). At 4 weeks after bladder repair, the histological staining of the grafts in the SF-ADSCs and SF groups showed a large number of degraded fragments of double-layer silk scaffold. At 12 weeks, the morphology of the graft in the SF-ADSCs group showed uniform bladder morphology, which was similar to that of normal bladder tissue. Immunofluorescence staining showed that the continuous urothelial layer, abundant smooth muscle tissue, vascular structure and regenerated neurons could be observed in the SF-ADSCs group. Urodynamic test showed that the bladder maximum volume (0.74±0.03)ml and compliance (16.68±0.44)μl/cm H 2O in the SF-ADSCs group, which were better than that in the SF group [(0.47±0.05)ml, (14.89±0.37)μl/cm H 2O], but lower than that in the control group [(1.12±0.08)ml, (19.34±0.45)μl/cm H 2O], and the difference was statistically significant ( P<0.05). Conclusions:The tissue engineered bladder patch constructed with double-layer silk scaffolds and ADSCs could promote the morphological repair of bladder tissue, the regeneration of bladder wall structure and the recovery of bladder physiological function.

Objective To understand the situation of cancer screening of community residents and its association with the knowledge of cancer core knowledge, and to provide reference for the formulation of secondary cancer prevention measures. Methods A cross-sectional survey was conducted among 2 037 residents aged 18-79 who lived in Bao 'an District, Shenzhen. Multivariate Logistic regression analysis was used to investigate the relationship between core knowledge and cancer screening behavior after adjusting for age, gender, education, marriage, occupation and smoking. Results The cancer screening rate of community residents was 28.10%, and the screening rate of middle-aged and elderly people aged 40-79 was 33.50 %.The proportion of ^“not very well understanding^”, ^“partial understanding^” and ^“basic understanding^” of the core knowledge of cancer were 43.91%, 42.33% and 13.76%, respectively, which was higher than that of the non-participants. Multivariate analysis showed that the women, the higher the level of education of college/university or above and the higher the level of knowledge of cancer prevention core knowledge, the higher the probability of participating in cancer screening was OR (95%CI ) : 2.40 (1.86-3.12), 1.65 (1.29-2.10), 1.38 (1.18 - 1.62), respectively. Conclusion The proportion of cancer screening in community residents needs to be improved, and the degree of core knowledge of cancer is closely related to cancer screening behavior. It is suggested to increase the publicity and education of the core knowledge of cancer, and at the same time, carry out the health education of secondary cancer prevention for the key population such as men and people with low education level, so as to improve the proportion of ^“early detection, early diagnosis and early treatment^” of cancer.

Objective:Investigate the safety and feasibility of using the new self-designed implanting applicator in vaginal three-dimensional intracavitary brachytherapy after hysterectomy for gynecological cancer, and to explore the clinical value of the self-designed implanting applicator.Methods:Sixty-two gynecological cancer patients who underwent brachytherapy in Sun Yat-sen University Cancer Center were selected in this study. Each patient received three-dimensional intracavitary brachytherapy because of the indication of postoperative radiotherapy. Each patient was treated with different types of self-designed implanting applicators according the condition of postoperative vagina,and the vaginal tube and implant needle were placed in the template according to the preset channnel. Based on the actual CT images, the high-risk clinical target volume (HR-CTV), and organs at risk were defined according to unified target area delineation criteria and then the brachytherapy plan was conducted. The prescription dose of high-risk clinical target volume (HR-CTV) was 5.5 Gy/time. The parameters such as target area, organs at risk volume and irradiated dose were evaluated by DVH diagram.Results:Sixty-two patients successfully completed brachytherapy under the guidance of self-designed implanting applicator. A total of 140 implantation treatments were performed. The total average dose of HR-CTV D90% was (575.48±22.30) cGy, the mean dose D 2cm3 of bladder, rectum and sigmoid colon were (328.69±102.71), (369.14±46.59) and (27.28±71.27) cGy, the small intestine did not drop the target area, so there was no statistics. There was statistical significance between target volume and organs at risk dose ( P<0.05). Conclusions:The new self-designed implanting applicator has obvious clinical advantages in vaginal three-dimensional intracavitary brachytherapy after hysterectomy for gynecological cancer, meets the requirements of the preset planning dose,and it is sample to operate and highly safe,which indicated a bright future of the clinical application.

Abstract This prospective observational study included 361 benign and malignant breast nodules from 258 women who had underwent breast grayscale ultrasound and had been confirmed pathologically. A total of 396 image features of lesion areas in ultrasonic images were extracted. The radiomic signature was developed using least absolute shrinkage and selection operator algorithms after feature selection using the minimum redundancy maximum relevance method. Receiver operating characteristic curve(ROC)and calibration curve were used to test the performance of the model. The area under the ROC curve(AUC), accuracy, sensitivity, specificity, Youden index for the training cohort were 0.84,0.761,0.840,0.715,0.603. And the AUC, accuracy, sensitivity, specificity, Youden index for the validation cohort were 0.84,0.716, 0.823, 0.654, 0.536. The diagnostic results of data from the radiomics model were basically consistent with the actual situation. Radiomics based on grayscale ultrasound performs well in the differentiation of malignant from benign breast nodules which effectively avoids the subjective diagnosis, and has good clinical application value.

Ischemic hepatitis is inflammation caused by necrosis of liver cells due to ischemia and hypoxia caused by low cardiac output or septic shock. It is often complicated by heart failure or severe septic shock. One of the pathogenesis of ischemic hepatitis is hepatocyte injury caused by ischemia and hypoxia, which results in damage-associated molecular patterns (DAMPs) release and binding to membrane receptors such as toll like receptors (TLRs) to cause inflammatory reactions.The other is when the ischemic liver is reperfused, hepatocyte mitochondrias will produce a large amount of ROS causing ischemia reperfusion injury. These two mechanisms and related molecular pathways are elaborated in this paper.

FibroTouch (FT) has been used widely in clinic. Studies of the FT diagnostic efficiency and influencing factors of liver stiffness measurement (LSM) of liver fibrosis in autoimmune liver diseases (AILD) have shown that FT has a good diagnostic efficiency and accuracy, especially in AIH. However, for patients with primary biliary cholangitis and overlap syndrome of autoimmune hepatitis, FT results should be vigilant. In addition, the diagnostic efficiency of FT. Notably, when using FT to diagnose AILD, the value of elastic stiffness depends on five influencing factors, such as, age, total bile acid, international standardized ratio, FIB-4 index, and prothrombin time.