Objective To explore the feasibility and reference value of allogeneic lung transplantation and postoperative monitoring in miniature pigs for lung transplantation research. Methods Two miniature pigs (R1 and R2) underwent left lung allogeneic transplantation. Complement-dependent cytotoxicity tests and blood cross-matching were performed before surgery. The main operative times and partial pressure of arterial oxygen (PaO₂) after opening the pulmonary artery were recorded during surgery. Postoperatively, routine blood tests, biochemical blood indicators and inflammatory factors were detected, and pathological examinations of multiple organs were conducted. Results The complement-dependent cytotoxicity test showed that the survival rate of lymphocytes between donors and recipients was 42.5%-47.3%, and no agglutination reaction occurred in the cross-matching. The first warm ischemia times of D1 and D2 were 17 min and 10 min, respectively, and the cold ischemia times were 246 min and 216 min, respectively. Ultimately, R1 and R2 survived for 1.5 h and 104 h, respectively. Postoperatively, in R1, albumin (ALB) and globulin (GLB) decreased, and alanine aminotransferase increased; in R2, ALB, GLB and aspartate aminotransferase all increased. Urea nitrogen and serum creatinine increased in both recipients. Pathological results showed that in R1, the transplanted lung had partial consolidation with inflammatory cell infiltration, and multiple organs were congested and damaged. In R2, the transplanted lung had severe necrosis with fibrosis, and multiple organs had mild to moderate damage. The expression levels of interleukin-1β and interleukin-6 increased in the transplanted lungs. Conclusions The allogeneic lung transplantation model in miniature pigs may systematically evaluate immunological compatibility, intraoperative function and postoperative organ damage. The data obtained may provide technical references for subsequent lung transplantation research.

ObjectiveTo investigate the association between immunoglobulin G （IgG）/immunoglobulin M （IgM） ratio and prognosis in patients with initially unresectable hepatocellular carcinoma （iuHCC） receiving TTP triple therapy with transcatheter arterial chemoembolization （TACE）， tyrosine kinase inhibitor （TKI）， and programmed cell death protein-1 （PD-1） inhibitors. MethodsA retrospective analysis was performed for the clinical data of 151 iuHCC patients who received TTP triple therapy in Department of Hepatobiliary Surgery， Guangxi Medical University Cancer Hospital， from November 2019 to December 2022， and according to IgG/IgM ratio， they were divided into high IgG/IgM group （IgG/IgM ratio >13.23） and low IgG/IgM group （IgG/IgM ratio ≤13.23）. The t-test was used for comparison of continuous data between groups， and the chi-square test was used for comparison of categorical data between groups. The Kaplan-Meier method and the log-rank test were used for survival analysis， and the Cox proportional hazards model was used to investigate the potential influencing factors for overall survival （OS）. ResultsThe 151 patients had a median OS of 26.7 months （95% confidence interval ［CI］： 19.8-not reached） and a median progression-free survival of 12.5 months （95%CI： 10.4 — 15.8）. The objective response rate was 83.4% and the disease control rate was 94.0%. There were no significant differences in baseline data between the high IgG/IgM group and the low IgG/IgM group （all P>0.05）. There was a significant difference in median OS between the high IgG/IgM group and the low IgG/IgM group （20.6 months vs not reached， P=0.016）. In both the high IgG/IgM group and the low IgG/IgM group， salvage hepatectomy was significantly associated with the improvement in OS （χ²=8.297 and 10.307， both P<0.05）. The multivariate analysis showed that high IgG/IgM ratio （hazard ratio ［HR］=1.799， 95%CI： 1.077 — 3.006， P=0.025）， baseline alpha-fetoprotein >400 ng/mL （HR=1.762， 95%CI： 1.017 — 3.050， P=0.043）， and BCLC stage （HR=2.265， 95%CI： 1.212 — 4.232， P=0.010） were independent influencing factors for OS. ConclusionHigh IgG/IgM ratio is associated with a poorer prognosis in iuHCC patients receiving TTP triple therapy， and salvage hepatectomy has a potential value in improving the prognosis of patients with a high IgG/IGM ratio.

This study aims to investigate the potential effect of the water extract of fresh Rehmanniae Radix on hypercholesterolemia in mice that was induced by a high-fat and high-cholesterol diet and explore its possible mechanism from bile acid reabsorption. Male C57BL/6 mice were randomly assigned into the following groups: control, model, low-and high-dose(4 and 8 g·kg~(-1), respectively) fresh Rehmanniae Radix, and positive drug(simvastatin, 0.05 g·kg~(-1)). Other groups except the control group were fed with a high-fat and high-cholesterol diet for 6 consecutive weeks to induce hypercholesterolemia. From the 6th week, mice were administrated with corresponding drugs daily via gavage for additional 6 weeks, while continuing to be fed with a high-fat and high-cholesterol diet. Serum levels of total cholesterol(TC), triglycerides(TG), low density lipoprotein-cholesterol(LDL-c), high density lipoprotein-cholesterol(HDL-c), and total bile acid(TBA), as well as liver TC and TG levels and fecal TBA level, were determined by commercial assay kits. Hematoxylin-eosin(HE) staining, oil red O staining, and transmission electron microscopy were performed to observe the pathological changes in the liver. Three livers samples were randomly selected from each of the control, model, and high-dose fresh Rehmanniae Radix groups for high-throughput transcriptome sequencing. Differentially expressed genes were mined and KEGG pathway enrichment analysis was performed to predict the key pathways and target genes of the water extract of fresh Rehmanniae Radix in the treatment of hypercholesterolemia. RT-qPCR was employed to measure the mRNA levels of cholesterol 7α-hydroxylase(CYP7A1) and cholesterol 27α-hydroxylase(CYP27A1) in the liver. Western blot was employed to determine the protein levels of CYP7A1 and CYP27A1 in the liver as well as farnesoid X receptor(FXR), apical sodium-dependent bile acid transporter(ASBT), and ileum bile acid-binding protein(I-BABP) in the ileum. The results showed that the water extract of fresh Rehmanniae Radix significantly lowered the levels of TC and TG in the serum and liver, as well as the level of LDL-c in the serum. Conversely, it elevated the level of HDL-c in the serum and TBA in feces. No significant difference was observed in the level of TBA in the serum among groups. HE staining, oil red O staining, and transmission electron microscopy showed that the water extract reduced the accumulation of lipid droplets in the liver. Further mechanism studies revealed that the water extract of fresh Rehmanniae Radix significantly down-regulated the protein levels of FXR and bile acid reabsorption-related proteins ASBT and I-BABP. Additionally, it enhanced CYP7A1 and CYP27A1, the key enzymes involved in bile acid synthesis. Therefore, it is hypothesized that the water extract of fresh Rehmanniae Radix may exert an anti-hypercholesterolemic effect by regulating FXR/ASBT/I-BABP signaling, inhibiting bile acid reabsorption, and increasing bile acid excretion, thus facilitating the conversion of cholesterol to bile acids.
Animals ; Male ; Bile Acids and Salts/metabolism* ; Mice, Inbred C57BL ; Mice ; Diet, High-Fat/adverse effects* ; Cholesterol/metabolism* ; Drugs, Chinese Herbal/administration & dosage* ; Hypercholesterolemia/genetics* ; Receptors, Cytoplasmic and Nuclear/genetics* ; Rehmannia/chemistry* ; Liver/drug effects* ; Humans ; Cholesterol 7-alpha-Hydroxylase/genetics* ; Plant Extracts

Eight amide alkaloids(1-8) were isolated from the 70% ethanol extract of Cannabis Fructus using silica gel column chromatography, MCI column chromatography, and semi-preparative high-performance liquid chromatography(HPLC). Their structures were identified as hempspiramide A(1), N-[(4-hydroxyphenyl)ethyl]formamide(2), N-acetyltyramide(3), N-trans-p-coumaroyltyramine(4), N-trans-caffeoyltyramine(5), N-trans-feruloyltyramine(6), N-cis-p-coumaroyltyramine(7), N-cis-feruloyltyramine(8) by using spectroscopic methods such as NMR and MS. Among these compounds, compound 1 was a new amide alkaloid, while compounds 2 and 3 were isolated from Cannabis Fructus for the first time. Some of the isolates were assayed for their α-glucosidase inhibitory activity. Compounds 5-7 displayed significant inhibitory activity against α-glucosidase with IC_(50) values ranging from 1.07 to 4.63 μmol·L~(-1).
Cannabis/chemistry* ; Alkaloids/pharmacology* ; Amides/isolation & purification* ; Drugs, Chinese Herbal/isolation & purification* ; Fruit/chemistry* ; Molecular Structure ; alpha-Glucosidases/chemistry* ; Chromatography, High Pressure Liquid

As a new type of production factor that can empower the development of new quality productivity, the data element is an important engine to promote the high quality development of the industry. Traditional Chinese medicine(TCM) dispensing is the most basic work of TCM clinical pharmacy, and its quality directly affects the clinical efficacy of TCM. The integration of data elements and TCM dispensing can stimulate the innovation and vitality of the TCM dispensing industry and promote the high-quality and sustainable development of the industry. A large-scale, detailed, and systematic study on TCM dispensing was conducted. The innovative practice path of data fusion construction in the whole process of TCM dispensing was investigated by integrating the digital resources "nine full activities" of TCM dispensing, creating the digital dictionary of "TCM clinical information data elements", and exploring innovative applications of TCM dispensing driven by data and technology, so as to promote the standardized, digital, and intelligent development of TCM dispensing in medical health services. The research content of this project was successfully selected as the second batch of "Data element×" typical cases of National Data Administration in 2024, which is the only selected case in the field of TCM.
Medicine, Chinese Traditional/methods* ; Drugs, Chinese Herbal ; Humans

This study established the HPLC fingerprints, characteristic chromatograms, and a multi-component content determination method for Bidens bipinnata and B. biternata. The chemical pattern recognition analysis was then employed to clarify the characteristic indexes of quality differences between the two original plants of Bidentis Herba, providing a reference for establishing the quality standards of Bidentis Herba. HPLC was launched on an Agilent Poroshell 120 EC-C_(18) chromatographic column(4.6 mm×250 mm, 4 μm) by gradient elution with a mobile phase of 0.1% aqueous phosphoric acid-acetonitrile at a flow rate of 0.7 mL·min~(-1), detection wavelength of 270 nm, column temperature of 25 ℃, and an injection volume of 5 μL. The similarity between the fingerprints of 18 batches of Bidentis Herba samples and the common pattern(R) ranged from 0.572 to 0.933. A total of 23 chromatographic peaks were calibrated. Through comparison with the reference substances, six components(neochlorogenic acid, chlorogenic acid, isochlorogenic acid A, isochlorogenic acid B, rutin, and hyperoside) were identified and subjected to quantitative analysis. The characteristic fingerprints of B. bipinnata and B. biternata were calibrated with 20 and 17 characteristic peaks, respectively. Among them, peaks 8, 9, 22, and 23 were the characteristic peaks of B. bipinnata, and peak 7 was the characteristic peak of B. biternata, which can be used to distinguish the two original plants of Bidentis Herba. The relative standard deviation of the content of the above-mentioned six components ranged from 36% to 123%. The cluster analysis, principal component analysis, and orthogonal partial least squares-discriminant analysis(OPLS-DA) classified the 18 batches of Bidentis Herba samples into two categories. Additionally, through the analysis of variable importance in projection(VIP) under OPLS-DA, three characteristic indexes, rutin, isochlorogenic acid A, and isochlorogenic acid B, were identified. The analytical method established in this study can comprehensively evaluate the consistency of Bidentis Herba samples derived from different original plants, specifically identify the differential components between them, and effectively distinguish the two original plants of Bidentis Herba, providing a basis for the differentiation between different original plants and the quality control of Bidentis Herba.
Chromatography, High Pressure Liquid/methods* ; Drugs, Chinese Herbal/chemistry* ; Quality Control ; Bidens/chemistry*

Serine protease inhibitor Kazal-type (SPINK) is a skin keratinizing protease inhibitor, which was initially found in animal serum and is widely present in plants, animals, bacteria, and viruses, and they act as key regulators of skin keratinizing proteases and are involved in the regulation of keratinocyte proliferation and inflammation, primarily through the inhibition of deregulated tissue kinin-releasing enzymes (KLKs) in skin response. This process plays a crucial role in alleviating various skin problems caused by hyperkeratinization and inflammation, and can greatly improve the overall condition of the skin. Specifically, the different members of the SPINK family, such as SPINK5, SPINK6, SPINK7, and SPINK9, each have unique biological functions and mechanisms of action. The existence of these members demonstrates the diversity and complexity of skin health and disease. First, SPINK5 mutations are closely associated with the development of various skin diseases, such as Netherton’s syndrome and atopic dermatitis, and SPINK5 is able to inhibit the activation of the STAT3 signaling pathway, thereby effectively preventing the metastasis of melanoma cells, which is important in preventing the invasion and migration of malignant tumors. Secondly, SPINK6 is mainly distributed in the epidermis and contains lysine and glutamate residues, which can act as a substrate for epidermal transglutaminase to maintain the normal structure and function of the skin. In addition, SPINK6 can activate the intracellular ERK1/2 and AKT signaling pathways through the activation of epidermal growth factor receptor and protease receptor-2 (EphA2), which can promote the migration of melanoma cells, and SPINK6 further deepens its role in stimulating the migration of malignant tumor cells by inhibiting the activation of STAT3 signaling pathway. This process further deepens its potential impact in stimulating tumor invasive migration. Furthermore, SPINK7 plays a role in the pathology of some inflammatory skin diseases, and is likely to be an important factor contributing to the exacerbation of skin diseases by promoting aberrant proliferation of keratinocytes and local inflammatory responses. Finally, SPINK9 can induce cell migration and promote skin wound healing by activating purinergic receptor 2 (P2R) to induce phosphorylation of epidermal growth factor and further activating the downstream ERK1/2 signaling pathway. In addition, SPINK9 also plays an antimicrobial role, preventing the interference of some pathogenic microorganisms. Taken as a whole, some members of the SPINK family may be potential targets for the treatment of dermatological disorders by regulating multiple biological processes such as keratinization metabolism and immuno-inflammatory processes in the skin. The development of drugs such as small molecule inhibitors and monoclonal antibodies has great potential for the treatment of dermatologic diseases, and future research on SPINK will help to gain a deeper understanding of the physiopathologic processes of the skin. Through its functions and regulatory mechanisms, the formation and maintenance of the skin barrier and the occurrence and development of inflammatory responses can be better understood, which will provide novel ideas and methods for the prevention and treatment of skin diseases.

BACKGROUND:The use of 3D-printed patient-specific instruments in opening wedge high tibial osteotomy has advantages such as shorter operative time,fewer fluoroscopic exposures,and higher correction accuracy.However,previous studies have reported issues such as significant damage to surrounding soft tissues and improper fixation of the plates. OBJECTIVE:To investigate the clinical efficacy of using 3D-printed patient-specific instruments combined with customized locking plate in opening wedge high tibial osteotomy for the treatment of knee osteoarthritis. METHODS:A total of 20 patients diagnosed with knee osteoarthritis were divided into the 3D group(n=10)and the conventional group(n=10)according to surgical methods.The 3D group underwent opening wedge high tibial osteotomy using 3D-printed patient-specific instruments combined with customized locking plate,while the conventional group underwent opening wedge high tibial osteotomy using conventional methods.The operative time,fluoroscopic exposures,incision length,pre-and postoperative hip-knee-ankle angle,medial proximal tibial angle,posterior tibial slope,the difference between the planned and actual correction angle,preoperative and 1,3,6 months postoperative knee range of motion and Lysholm score,and incidence of complications were analyzed and compared between the two groups. RESULTS AND CONCLUSION:(1)The operative time and fluoroscopic exposures were significantly shorter in the 3D group compared to the conventional group,with a statistically significant difference(P<0.001).(2)Both groups showed a significant improvement in postoperative hip-knee-ankle angle and medial proximal tibial angle compared to preoperative values,with a statistically significant difference(P<0.001),while there was no significant change in posterior tibial slope.In the 3D group,the postoperative hip-knee-ankle angle,medial proximal tibial angle,and posterior tibial slope differed from their respective preoperative planned values by(-0.22±0.72)°,(-0.20±0.73)°,and(0.23±0.37)°,but the differences were not statistically significant.The difference between the planned and actual correction angle of 3D group was significantly smaller than that of conventional group(P<0.05).(3)Both groups showed a gradual increase in knee range of motion and Lysholm scores after surgery(P<0.001).Compared to the conventional group,the 3D group had superior knee range of motion at 1 and 3 months postoperatively,as well as a higher Lysholm score at 1 month postoperatively,with statistically significant differences(P<0.05).There were no statistically significant differences in Lysholm score at 3 months and knee range of motion and Lysholm score at 6 months between the two groups(P>0.05).(4)Complications occurred in neither groups.(5)The above results indicate that both 3D-printed patient-specific instruments combined with customized locking plate and conventional methods have good clinical efficacy.However,the former has a shorter operative time,fewer fluoroscopic exposures,and faster postoperative recovery of knee joint function.Additionally,3D-printed patient-specific instruments can achieve preoperative planning accurately.

In recent years, significant progress has been made in the field of liver transplantation in terms of donor expansion, technological innovation and perioperative management. Machine perfusion technology, through dynamic repair and assessment of donor liver quality, can effectively reduce postoperative complications and increase the utilization rate of marginal donor livers. The optimization of split liver transplantation technology combined with normothermic perfusion further alleviates the shortage of donors, but its promotion is still limited by technical barriers. Xenotransplantation has achieved preclinical breakthroughs in the field of genetically modified pig livers, but ethical and immune barrier issues need to be urgently resolved. In the field of liver cancer liver transplantation, the focus is on neoadjuvant treatment with immune checkpoint inhibitors and the development of recurrence prediction models, which promotes precise treatment. For perioperative management, the optimization of individualized immunosuppressive regimens, artificial liver support, and strategies for the prevention and control of vascular complications has significantly improved patients’ survival rates. Personalized treatment for children, elderly recipients, and recipients with multiple comorbidities provides new ideas for liver transplantation in special populations. In the future, liver transplantation research may focus on the integration of multidisciplinary approaches, individualized treatment and emerging technologies to advance the global liver transplantation cause to new heights.

AIM: To examine how three distinct central positioning techniques for anterior capsulotomy-pupil center, limbus center, and lens apex-affect intraocular lens(IOL)placement and visual quality following femtosecond laser-assisted cataract surgery(FLACS).METHODS: A total of 36 patients(72 eyes)with age-related cataracts who underwent FLACS and ZCB00 aspherical IOL implantation at Aier Eye Hospital Medical Center, Anhui Medical University between January and December 2023 were included in this prospective study. Patients were divided into three groups based on the central positioning mode for anterior capsulotomy: pupil center, limbus center, and lens apex center groups. IOL alignment and displacement were evaluated using the Casia2 device, and the postoperative visual quality was assessed.RESULTS: At 1 d postoperatively, the IOL tilt for the pupil, limbus, and apex groups were 3.96°±1.51°, 4.63°±1.87°, and 3.90°±2.24°, respectively(F=1.07, P=0.35); IOL decentration values were 0.21±0.10 mm, 0.23±0.16 mm, and 0.21±0.12 mm, respectively(F=0.14, P=0.87); total higher-order aberrations were 0.32±0.40 μm, 0.56±0.61 μm, and 0.53±0.60 μm, respectively(F=1.38, P=0.26); and coma aberrations values were 0.13±0.10 μm, 0.16±0.15 μm, and 0.14±0.15 μm, respectively(F=0.3, P=0.74). All results obtained postoperative day 1 did not differ significantly. At 3 mo postoperatively, IOL tilt values were 5.42°±2.00°, 3.96°±1.44°, and 3.20°±1.19°, respectively(F=12.40, P<0.001); IOL decentration values were 0.33±0.07 mm, 0.23±0.11 mm, and 0.21±0.11 mm, respectively(F=4.99, P=0.008); total higher-order aberrations were 0.67±0.29 μm, 0.44±0.37 μm, and 0.42±0.19 μm, respectively(F=5.50, P=0.006); and coma aberrations values were 0.21±0.12 μm, 0.19±0.12 μm, and 0.12±0.11 μm, respectively(F=3.87, P=0.03). All results obtained 3 mo postoperatively were statistically significant.CONCLUSION: Using the lens apex as the central positioning mode for anterior capsulotomy in FLACS improves postoperative IOL stability and reduces postoperative IOL tilt and decentration. If the lens apex cannot be determined intraoperatively, the limbus center-positioning mode is recommended.