Objective To construct a lung cancer surgery-oriented disease-specific database covering the entire perioperative care pathway, thereby improving the quality and usability of key surgical data elements. Methods Real-world clinical data were extracted from a single-center thoracic surgery department. A standardized data model was established based on the open electronic health record (openEHR) standard. Large language model (LLM), optical character recognition (OCR), and artificial intelligence (AI)-driven techniques were employed to extract, structure, and perform quality control on unstructured clinical narratives, imaging reports, and radiological data, with a focus on capturing surgically relevant perioperative indicator. Results A multimodal database comprising 19 917 patients was established, including 7 930 males and 11 987 females, with ages ranging from 15 to 97 (61.7±9.7) years. The database includes 582 structured data variables, textual report data corresponding to 69 clinical indicators, 13 000 pulmonary function test PDF reports, and chest CT imaging data from 16 884 patients. This database comprehensively covers major information relevant to surgical diagnosis and treatment of lung cancer, significantly improving the completeness and granularity of surgical detail data. Large language models (LLMs) and optical character recognition (OCR) technologies enhanced the efficiency of converting unstructured data into structured formats, while a multi-level manual verification process ensured data accuracy and traceability. The database supports real-world research including comparisons of surgical procedures, prediction of postoperative complications, prognosis assessment, and multimodal data association analyses.

Oral squamous cell carcinoma (OSCC) is a common head and neck malignancy. Approximately 50% to 60% of patients with OSCC are diagnosed at a locally advanced stage (clinical staging III-IVa). Even with comprehensive and sequential treatment primarily based on surgery, the 5-year overall survival rate remains below 50%, and patients often suffer from postoperative functional impairments such as difficulties with speaking and swallowing. Programmed death receptor-1 (PD-1) inhibitors are increasingly used in the neoadjuvant treatment of locally advanced OSCC and have shown encouraging efficacy. However, clinical practice still faces key challenges, including the definition of indications, optimization of combination regimens, and standards for efficacy evaluation. Based on the latest research advances worldwide and the clinical experience of the expert group, this expert consensus systematically evaluates the application of PD-1 inhibitors in the neoadjuvant treatment of locally advanced OSCC, covering combination strategies, treatment cycles and surgical timing, efficacy assessment, use of biomarkers, management of special populations and immune related adverse events, principles for immunotherapy rechallenge, and function preservation strategies. After multiple rounds of panel discussion and through anonymous voting using the Delphi method, the following consensus statements have been formulated: 1) Neoadjuvant therapy with PD-1 inhibitors can be used preoperatively in patients with locally advanced OSCC. The preferred regimen is a PD-1 inhibitor combined with platinum based chemotherapy, administered for 2-3 cycles. 2) During the efficacy evaluation of neoadjuvant therapy, radiographic assessment should follow the dual criteria of Response Evaluation Criteria in Solid Tumors (RECIST) version 1.1 and immune RECIST (iRECIST). After surgery, systematic pathological evaluation of both the primary lesion and regional lymph nodes is required. For combination chemotherapy regimens, PD-L1 expression and combined positive score need not be used as mandatory inclusion or exclusion criteria. 3) For special populations such as the elderly (≥ 70 years), individuals with stable HIV viral load, and carriers of chronic HBV/HCV, PD-1 inhibitors may be used cautiously under the guidance of a multidisciplinary team (MDT), with close monitoring for adverse events. 4) For patients with a poor response to neoadjuvant therapy, continuation of the original treatment regimen is not recommended; the subsequent treatment plan should be adjusted promptly after MDT assessment. Organ transplant recipients and patients with active autoimmune diseases are not recommended to receive neoadjuvant PD-1 inhibitor therapy due to the high risk of immune related activation. Rechallenge is generally not advised for patients who have experienced high risk immune related adverse events such as immune mediated myocarditis, neurotoxicity, or pneumonitis. 5) For patients with a good pathological response, individualized de escalation surgery and function preservation strategies can be explored. This consensus aims to promote the standardized, safe, and precise application of neoadjuvant PD-1 inhibitor strategies in the management of locally advanced OSCC patients.

The industry standard Barium Sulfate Anti-Radiation Mortar (JC/T 2676—2022) was officially released on September 30, 2022, and came into effect on April 1, 2023. The promulgation and implementation of this standard play a significant role in improving the product quality of barium sulfate anti-radiation mortar, promoting industry development, and safeguarding the occupational health of workers. To facilitate accurate understanding of the standard clauses and ensure proper implementation of its requirements, this article elaborated on the background, objectives, and significance of the standard development, along with an interpretation of its key clauses.

Background: and Purpose Vertebrobasilar fusiform aneurysms (VBFAs) carry substantial morbidity and mortality, but optimal management for unruptured VBFAs remains unclear. We compared the safety and efficacy of conservative management (CM), stent-assisted coiling (SAC), and flow diverters (FDs) in patients with unruptured VBFAs, focusing on long-term prognosis. Methods: This study included data from a nationwide Chinese cohort of patients with vertebrobasilar dissecting aneurysms. Inverse probability of treatment weighting (IPTW) balanced confounders across groups. The primary outcome was poor prognosis (modified Rankin Scale score >2). Secondary outcomes included aneurysm rupture, ischemic stroke, compression symptoms, and VBFA-related deaths. Logistic regression estimated odds ratios (ORs) and 95% confidence intervals (CIs). Subgroup and sensitivity analyses were performed. Results: Among 1,115 patients with unruptured VBFAs, 838 (median age, 54 years; 655 men) were included. After IPTW, baseline characteristics were balanced. Median follow-up was 54 months. FD was associated with a lower risk of poor prognosis than CM (OR, 0.48 [95% CI, 0.30 to 0.77]; p=0.002), with no difference between CM and SAC. FD also reduced aneurysm rupture (OR, 0.20 [95% CI, 0.07 to 0.60]; p=0.004) and compression symptoms (OR, 0.30 [95% CI, 0.13 to 0.68]; p=0.004) versus CM. Time-to-event analyses further revealed significant differences in vertebral artery lesions and Type I–II VBFAs, whereas no significant differences were observed in basilar or vertebrobasilar junction lesions or in Type III–IV VBFAs. Conclusions Compared with CM, FD was associated with improved long-term outcomes in unruptured VBFAs, particularly in vertebral artery lesions and Type I–II VBFAs, although residual confounding cannot be excluded.

Objective: To investigate the ability of different concentrations of piceatannol (PIC) solution to biomodify decalcified dentin matrices in primary teeth, thereby providing a theoretical basis for improving the durability of resin-dentin bonding. Methods: This study was approved by the Medical Ethics Committee of the institution. Molecular docking was performed to predict the interaction effects of PIC with type I collagen and matrix metalloproteinases (MMPs) in dentin. A total of 124 clinically extracted intact primary molars were selected due to retention; of these, 76 were prepared into 60 completely decalcified dentin beams and 24 dentin slices. The 60 beams were equally allocated for dry mass loss and swelling ratio testing (30 beams each). For both experiments, the beams were randomly divided into five groups (n = 6): a control group, 5% glutaraldehyde group, and 2.5, 5, and 10 mg/mL PIC solution groups. This was to evaluate the anti-enzymatic hydrolytic properties and mechanical performance of type I collagen. Of the 24 slices, 15 were assigned to the aforementioned five groups (n = 3) for Fourier-transform infrared spectroscopy (FTIR) to explore the cross-linking mechanism. The remaining nine slices were randomly divided into three groups (n = 3): distilled water group A (SEM examination prior to enzymatic hydrolysis), distilled water group B (SEM examination after enzymatic hydrolysis), and a 10 mg/mL PIC solution group (SEM examination after treatment with 10 mg/mL PIC and subsequent enzymatic hydrolysis). This was to evaluate the cross-linking effect on demineralized dentin collagen. The remaining 48 molars were fabricated into bonding specimens and randomly divided into four groups (n = 12): a control group (distilled water group) and 2.5, 5, and 10 mg/mL PIC groups. Immediate and aged shear bond strength (SBS) were measured, and failure modes were observed under a stereomicroscope to investigate the impact of different PIC concentrations on the bonding durability of primary tooth dentin. Results: Molecular docking revealed strong binding activity between PIC and type I collagen/MMPs via hydrogen bonds, electrostatic potential, and hydrophobic forces; the FTIR results confirmed hydrogen bond formation. In the dry mass loss test, mass loss rates in the 2.5, 5, and 10 mg/mL PIC groups were significantly lower than that in the control group (P < 0.05), with the 10 mg/mL PIC group showing the most optimized cross-linking effect. Swelling tests indicated that all three PIC concentrations reduced the swelling ratio of the demineralized matrix, effectively improving its mechanical properties. SEM showed that collagen from the 10 mg/mL PIC group retained its natural three-dimensional network post-enzymolysis, contrasting sharply with the disintegrated collagen in the enzymolyzed distilled water group B but resembling the morphology of the non-enzymolyzed distilled water group A. SBS results demonstrated that the 10 mg/mL PIC group exhibited significantly higher bond strengths than the control group in both the immediate and aged tests (P < 0.05); immediate SBS in the 10 mg/mL PIC group was also significantly greater than that in the 2.5 mg/mL PIC group (P < 0.05), while no other intergroup differences were found (P > 0.05). Failure mode analysis indicated predominantly mixed fractures, with the proportion of interfacial fractures decreasing as PIC concentration increased compared with the control group. Conclusion A 10 mg/mL PIC solution can effectively cross-link decalcified dentin matrices in primary teeth, enhancing the anti-enzymatic hydrolytic capacity and mechanical properties during clinical operation, thereby promoting bond strength and interface stability, which promises to improve the long-term durability of resin-dentin bonding.

Objective:To investigate the effect of bed board of carbon fiber for treatment combined with fixed bottom board on verification results of Portal Dosimetry(PD)dose of intensity-modulated radiation therapy(IMRT)plan of fixed field for cervical cancer.Methods:A total of 15 patients with cervical cancer who admitted to Nanjing First Hospital from January 2019 to January 2020 were retrospectively selected,and the IMRT plans of fixed field for all patients were designed.The radiation field with 180° gantry angle was selected for each case to make the corresponding PD dose verification plan,and each verification plan included two subfields:AA180_0 and AA180_1.Three types of materials were placed between the accelerator head and the electronic portal imaging device(EPID),which included material without carbon fiber,bed board with carbon fiber for treatment,and the combination of the bed board with carbon fiber for treatment and the fixed bottom board with carbon fiber,when the Clinac iX accelerator was used to conduct verification plan for each case.The γ passing rates of the subfields(AA180_0 and AA180_1)and the total field(AA180)among three kinds of conditions,which included material without carbon fiber,bed board with carbon fiber for treatment,and the combination of the bed board with carbon fiber for treatment and the fixed bottom board with carbon fiber,were compared and analyzed.Results:For the subfield AA180_0,the γ passing rates under three different material conditions were respectively(96.09±1.38)%,(90.48±2.24)%and(81.85±2.46)%.For the subfield AA180_1,the γ passing rates under the above conditions were respectively(96.05±1.06)%,(91.86±2.22)%and(86.26±2.74)%.For the total field AA180,the γ passing rates were respectively(90.78±1.40)%,(84.82±2.56)%and(78.49±3.18)%.The γ passing rates of the subfield AA180_0,subfield AA180_1,and the total field AA180 showed statistically significant differences among the three different material conditions(F=177.80,80.00,91.42,P<0.01).Compared with materials without carbon fiber,the γ passing rate of the total field AA180 of the combination of the bed board with carbon fiber for treatment and the fixed bottom board with carbon fiber significantly decreased by 12.29%.Conclusion:In the PD dose verification of IMRT for cervical cancer,the bed board with carbon fiber for treatment combined with the fixed bottom board will produce adverse effect for the verification results.The effect of the single use of bed board for treatment is relatively small.The combined use of the bed board with carbon fiber for treatment and the fixed bottom board will lead to a significant deterioration in the verification result of PD dose.

Isocitrate dehydrogenase(IDH)wild-type glioma is a type of highly invasive brain tumor with poor prognosis and a high recur-rence rate.The recurrence process is driven by multiple complex and interwoven factors.Although the current standard treatment regi-mens can temporarily alleviate patients'symptoms,they still face significant challenges in effectively preventing tumor recurrence.The re-currence mechanism of this tumor is intricate and covers multiple aspects such as genomic instability,maintenance of stem cell characterist-ics and mesenchymal transformation,as well as dynamic changes in the tumor microenvironment.This article aims to comprehensively sum-marize the recurrence mechanism of glioblastoma and deeply explore potential countermeasures targeting these mechanisms,hoping to open up new perspectives and approaches for the treatment of recurrent tumors.

Purpose To evaluate the effectiveness of deep learning image reconstruction(DLIR)algorithms in reconstructing lumbar vertebrae images from abdominal CT scans,aiming to reduce radiation dose and eliminate the need for repeat lumbar CT examinations.Materials and Methods A retrospective collection was conducted from March to May 2024 in the First Affiliated Hospital of Tianjin University of Traditional Chinese Medicine.Thirty-two patients who underwent both abdominal and lumbar CT scans in a supine head-first position were enrolled.The abdominal CT(DLIR group)utilized a tube voltage of 120 kVp and a current of 200 mA with high-intensity DLIR for lumbar reconstruction.The standard lumbar CT(lumbar group)used the same voltage with a tube current of 260 mA and was reconstructed using 60%weighted adaptive statistical iterative reconstruction.Objective assessments was used to measure the CT values,noise(standard deviation,SD value),signal-to-noise ratio and contrast-to-noise ratio(excluding adipose tissue)at the third lumbar vertebral pedicle level and the L2/L3 intervertebral disc level for muscle,adipose tissue,cancellous bone,intervertebral discs,dura mater and cortical bone.Subjective assessments employed a five-point scale to evaluate image contrast,noise and sharpness.Results The volume CT dose index in lumbar group and DLIR group were 15.25 mGy and 11.74 mGy,respectively.There was no statistical difference in CT values between the structures of both groups(all P>0.05).Compared with the lumbar group,the DLIR group showed significant reductions in SD values across the measured tissues by 31.09%,35.66%,13.48%,27.82%,24.93%and 15.09%(t=5.09-7.21,all P<0.05).The signal-to-noise ratio improved by 36.40%,52.31%,16.56%,34.13%,38.39%and 18.81%,and the contrast-to-noise ratio improved by 51.70%,51.32%,36.24%,34.47%and 53.56%(t=-9.58--4.23,all P<0.001).The DLIR group significantly outperformed the lumbar group in image contrast[4.45(4.00,5.00)points vs.4.75(4.00,5.00)points],image noise[4.06(4.00,4.00)points vs.4.39(4.00,5.00)points],and spatial resolution of fine structures[4.00(4.00,4.00)points vs.4.27(4.00,5.00)points](Z=-3.80,-4.38,-3.55,all P<0.001).Conclusion Using high-intensity DLIR for abdominal examinations can achieve high-quality lumbar CT images with a 25%reduction in radiation dose,enabling simultaneous abdominal and lumbar scanning in a single session.