OBJECTIVE: To explore the prenatal and postnatal phenotypes of 22q11.2 microdeletion syndrome (22q11.2DS) and enhance clinical understanding of this condition. METHODS: Data were collected from 86 fetuses diagnosed with 22q11.2DS at four prenatal diagnostic centers across China between January 2014 and August 2025. Prenatal imaging findings, pregnancy outcomes, and postnatal conditions were analyzed. RESULTS: Among the 86 fetuses, complete ultrasound data were available for 65 cases. Cardiovascular abnormalities were observed in 42 cases, thymic hypoplasia or aplasia in 7 cases, urinary system anomalies in 6 cases, nuchal translucency (NT) thickening in 7 cases, butterfly vertebrae, clubfoot, omphalocele and diaphragmatic hernia in 1 case each, cleft lip and palate in 2 cases, and ultrasound soft markers in 13 cases. The parents of 9 fetuses opted to continue with the pregnancy. Among these, 6 showed no significant ultrasound abnormalities and no related phenotypes postnatally, while the remaining 3 exhibited ultrasound anomalies with postnatal manifestations including developmental delay, immunodeficiency, and cardiac defects. CONCLUSION Fetuses with 22q11.2DS may exhibit various ultrasound abnormalities in multiple systems before and after birth. In addition to cardiovascular anomalies, they may also present with thymic hypoplasia or aplasia, thickened NT, and urinary abnormalities. Fetuses with thickened NT or thymic anomalies should be closely monitored, and thymic assessment should be included in routine prenatal imaging evaluations. For fetuses with 22q11.2DS who show no ultrasound abnormalities, the risk of developing severe phenotypes after birth is relatively low, but occult palate clefts and psychiatric disorders cannot be ruled out. Due to limitations in sample size and follow-up duration, above conclusions require further validation through large-scale prospective studies.
Humans ; Female ; Pregnancy ; Ultrasonography, Prenatal ; DiGeorge Syndrome/genetics* ; Adult ; Male ; Follow-Up Studies ; Fetus/diagnostic imaging* ; Phenotype ; Infant, Newborn

OBJECTIVE: To summarize the clinical and genetic characteristics of a child with 46,XX Ovotesticular disorder of sex development (46,XX OTDSD) due to copy number variation of SOX3 gene. METHODS: A 46,XX male patient presented at the Capital Center for Children's Health, Capital Medical University in November 2024 was selected as the study subject. Clinical data of the child was collected. Peripheral blood samples were taken from the child and his parents and subjected to trio whole-genome sequencing. Skewed X-chromosome inactivation was tested in the child and his mother. A literature review was carried out on 46,XX males associated with mutations of the SOX3 gene. This study was approved by the Medical Ethics Committee of the Hospital (Ethics No.: SHERLL2025056). RESULTS: The 10-year-old boy presented with hypospadias and cryptorchidism at birth. Chromosome analysis at one year and a half revealed a 46,XX karyotype. Gonadal biopsy showed testicular tissue, while ultrasound at the age of 10 detected ovotesticular tissue. Whole-genome sequencing identified a 660 kb duplication in the Xq27.1 region, which was derived from his mother. X-chromosome inactivation testing showed random inactivation in the child and mild non-random inactivation in the mother. Literature review has found 11 publications involving 15 patients (including our case), among whom 14 had a male social gender. They had primarily presented with hypospadias at birth but had no significant endocrine abnormalities. Most patients had experienced testicular failure after puberty. SOX3 related 46,XX males are mainly caused by de novo duplications, although a few maternal carriers had been discovered. CONCLUSION Duplication of the SOX3 gene probably underlay the pathogenesis is this 46,XX male. Individuals with 46,XX SRY negative male phenotypes should be routinely screened for SOX3 gene variants. Structural variations of the SOX3 gene can lead to complete or partial sex reversal in 46,XX individuals with minimal impact on intellectual and motor development, as well as other endocrine hormones.
Child ; Humans ; Male ; 46, XX Disorders of Sex Development/genetics* ; DNA Copy Number Variations ; Gene Duplication ; Phenotype ; SOXB1 Transcription Factors/genetics*

OBJECTIVE: To explore the genotype-phenotype correlation in a Chinese family with structural brain abnormalities due to variant of the TUBB gene. METHODS: A family undergoing prenatal diagnosis at Beijing Obstetrics and Gynecology Hospital in October 2024 was selected as the study subject. Clinical data were collected. Amniotic fluid sample was subjected to chromosomal copy number variation sequencing (CNV-seq). Trio whole-exome sequencing (Trio-WES) was carried out on the amniotic fluid and parental blood samples, and candidate variant was verified by Sanger sequencing. This study was approved by the Medical Ethics Committee of the hospital (Ethics No.: 2023-KY-076-01). RESULTS: Both prenatal ultrasound and fetal MRI showed deviation of brain midline, unilateral lateral ventriculomegaly, and bilateral gyral asymmetry. Trio-WES revealed that the fetus has harbored a maternally derived heterozygous missense variant of the TUBB gene [NM_178014.4: c.155A>G (p.N52S)]. Sanger sequencing confirmed that the woman and a previously terminated fetus both harbored the same variant. Both the proband and two fetuses exhibited similar neuroimaging abnormalities including midline deviation and asymmetrical gyri. Based on the guidelines from the American College of Medical Genetics and Genomics (ACMG), the variant was classified as likely pathogenic (PM2_Supporting+PS2_Moderate+PS3). CONCLUSION The heterozygous c.155A>G (p.N52S) variant was the TUBB gene probably underlay the pathogenesis of the structural brain abnormalities in this family. Above findings have expanded the phenotypic spectrum associated with the variant and facilitated the prenatal diagnosis for this family.
Humans ; Female ; Pregnancy ; Prenatal Diagnosis ; Tubulin/genetics* ; Adult ; Brain/diagnostic imaging* ; Male ; Pedigree ; DNA Copy Number Variations/genetics* ; Exome Sequencing ; Genetic Association Studies ; Magnetic Resonance Imaging

OBJECTIVE: To investigate the genetic mechanism for adverse pregnancies due to submicroscopic chromosomal structural variants in two cases, and to provide a precise guidance for preimplantation genetic testing. METHODS: Two families who had visited Chengdu Women's and Children's Central Hospital for reproduction guidance due to recurrent miscarriages, adverse pregnancy history and abnormal genetic testing of the offspring in June and December 2023 were selected as the study subjects. Chromosomal karyotyping and optical genome mapping (OGM) were carried out on peripheral blood samples from the two couples, and preimplantation genetic testing for structural rearrangement (PGT-SR) were performed on the blastocyst trophoblasts. This study was approved by the Medical Ethics Committee of the Hospital (Ethic No.: 2023-23). RESULTS: No abnormality was found on the G-banded karyotyping analysis for both couples. The OGM results revealed that the female partner of couple 1 had a translocation between 4pter-p16.3 (3.99 Mb) and 11pter-p15.4 (2.66 Mb), whilst no abnormality was found in the male partner. Similarly, the male partner of couple 2 had a translocation between 19q13.43-qter (1.90 Mb) and 22q13.31-qter (3.34 Mb). No abnormality was found in the female partner of couple 2. Neither breakpoints nor the adjacent region had involved an OMIM gene, except the formation of a fusion gene ZIM2-AS1-Z82186.1 (Both genes are non-coding, and the fusion gene was deemed as variant of unknown significance). PGT-SR of 11 blastocysts derived from couple 1 revealed that one embryo was suitable for priority transfer, three embryos were suitable for transfer, one embryo was recommended for genetic counselling, and six embryos were unsuitable for the transfer. For couple 2, six blastocysts were tested, of which only one embryo was deemed suitable for transfer. CONCLUSION When genetic testing of offspring indicates copy number variations such as deletions, duplications or mosaicism, the high-resolution OGM technique can be selected to screen parents for submicroscopic chromosomal structural variations. The result can facilitate accurate assessment for the risk of recurrence in offspring, selection of suitable method for reproduction, and identifying targets for PGT.
Humans ; Female ; Pregnancy ; Adult ; Male ; Karyotyping ; Chromosome Aberrations ; Abortion, Habitual/genetics* ; Preimplantation Diagnosis ; Genetic Testing

BACKGROUND:One of the advantages of clear aligner treatment is molar distalization.However,tooth tilting movement and loss of anterior anchorage may occur during treatment.There are few studies on whether these problems can be improved by selecting clear aligners with different thicknesses and edges to improve the clinical treatment effect.OBJECTIVE:To analyze the control ability of clear aligners with different thickness and edges on the central incisor,lateral incisor,and second molar when pushing the maxillary second molar distally by three-dimensional finite element analysis.METHODS:Three-dimensional finite element analysis models of bilateral maxillary second molar distalization with clear aligner,maxillary dentition,periodontal ligament,and alveolar bone with different thicknesses and margins were established by Mimics,Geomagic Wrap,3-matic and SolidWorks software,respectively.There were 16 combinations of four thicknesses(0.4,0.5,0.625,and 0.75 mm)and four margins(scallop,straight,straight extension 2 mm and straight extension 4 mm).The data were imported into Ansys Workbench software for design and solution.The mean value,peak value and distribution of the periodontal ligament equivalent stress of the second molar,the equivalent stress and the maximum initial displacement of the second molar,and the control ability of each appliance on the second molar,central incisor,and lateral incisor were analyzed.RESULTS AND CONCLUSION:(1)The mean equivalent stress of periodontal ligament of the second molar,the equivalent stress of the second molar and the maximum initial displacement of the second molar increased with the extension of the appliance edge and the increase of the thickness of the appliance in the 16 groups of models.(2)When the thickness of appliances was the same,the maximum equivalent stress of the second molar in the linear appliance group was the highest,and the maximum equivalent stress of the second molar in the linear extended appliance group was greater than that in the scallop appliance group.When the edge of the appliance was the same,the periodontal ligament equivalent stress peak of the second molar increased with the increase of the thickness of the appliance.The equivalent stress distribution in the periodontal ligament of the second molar in the linear extendable appliance group was more uniform than that in the scallop appliance group and the linear appliance group.(3)When the thickness of the appliance was the same,the scallop-shaped appliance had the worst control on the second molar.When the edge of the appliance was the same,with the increase of the thickness of the appliance,the control of the second molar by the linear extender appliance was gradually stronger than that by the linear appliance.The control of the central incisor was stronger and more stable with the linear extended 2 mm appliance,while the control of the lateral incisor was stronger and more stable with the linear appliance.(4)The results showed that when using clear aligners to push molars distally,extending the edge of the appliance could improve the control of the molars and reduce the tilting movement of the teeth.The design of a straight extension margin of 2 mm for the central incisor and a straight edge for the lateral incisor can enhance the control of the anchorage incisor and reduce the labial inclination of the anterior teeth.

BACKGROUND:Curcumin is the main active ingredient of turmeric and has significant medicinal value in anti-tumor,anti-inflammatory,antioxidant and other aspects.However,its poor water solubility,unstable chemical properties and easy decomposition lead to difficulty in extracting curcumin and low extraction yield.Therefore,it is particularly important to optimize the curcumin extraction method.OBJECTIVE:To enhance the extraction yield and utilization value of curcumin and optimize the curcumin extraction process and curcumin nanoparticle preparation process.METHODS:Curcumin was extracted from turmeric by ethanol extraction,ultrasonic extraction,ionic liquid extraction,enzyme extraction,and ionic liquid combined with ultrasonic assisted enzyme extraction.The curcumin extraction yield was detected by high performance liquid chromatography;the best extraction method was determined,and subsequent process optimization experiments were carried out.The curcumin extraction yield was the response value with the type of ionic liquid,reaction temperature,ultrasonic time,liquid-to-solid ratio,ionic liquid concentration,and enzyme-drug mass ratio as parameters.The optimal production process of ionic liquid combined with ultrasonic assisted enzyme extraction was determined by single factor combined response surface experiment.The optimal process for preparing curcumin nanoparticles by ionic crosslinking method was determined by single factor combined response surface experiment with acetic acid concentration,chitosan to sodium tripolyphosphate mass ratio,stirring rate,curcumin mass concentration,sodium tripolyphosphate mass concentration,and chitosan mass concentration as parameters,and drug encapsulation efficiency as response value.Curcumin nanoparticles were prepared under the optimal process,and the particle size,polydispersity index,Zata potential value,drug loading,stability,hemolysis rate,and antioxidant capacity in vivo and in vitro of the nanoparticles were detected.RESULTS AND CONCLUSION:(1)Among the five extraction methods,the curcumin yield of ionic liquid combined with ultrasound-assisted enzyme extraction was the highest,and this method was selected as the curcumin extraction method for subsequent experiments.The results of single factor combined response surface experiment showed that the optimal process for curcumin extraction was:ionic liquid selected 1-hexyl-3-methylimidazolium chloride,reaction temperature 55 ℃,liquid-to-solid ratio 40 mL/g,ultrasound time 57 minutes,ionic liquid concentration 57％,enzyme-drug mass ratio 3.5:10,and the obtained turmeric extraction yield was 3.10％.The optimal preparation process of curcumin nanoparticles was:glacial acetic acid concentration 0.5％,chitosan and sodium tripolyphosphate mass ratio 5.0:1,stirring speed 150 r/min,curcumin mass concentration 2.23 mg/mL,sodium tripolyphosphate mass concentration 1.45 mg/mL,chitosan mass concentration 3.63 mg/mL,and the obtained drug encapsulation efficiency was 90.61％.(2)The drug loading of curcumin nanoparticles was(14.49±0.23)％,the average particle size was(76.95±1.65)nm,the polydispersity coefficient was 0.15±0.02,and the Zata potential value was(32.37±1.46)mV.The curcumin nanoparticles had good stability and blood compatibility,did not induce hemolysis,and had stronger antioxidant capacity in vivo and in vitro than free curcumin.(3)The results show that the process optimization not only solves the problems of low extraction yield,poor solubility,and low bioavailability of curcumin,but also enhances its antioxidant activity in vivo and in vitro.

BACKGROUND:Currently,treatment method for knee osteoarthritis includes oral medicine,joint cavity drug injection,and physiotherapy,but the curative effect is limited.Existing studies have confirmed that silicon-based bioceramics can promote cartilage and subchondral bone repair and vascular regeneration.OBJECTIVE:To explore the effect of different concentrations of silicon-based bioceramics injected into the knee joint cavity in the treatment of knee osteoarthritis in rats.METHODS:Silicon-based bioceramics-calcium silicate was prepared.Twenty-five SD rats were randomly divided into five groups,with five rats in each group.The healthy group did not receive any intervention,and the modeling group,low-dose calcium silicate group,high-dose calcium silicate group,and saline group used anterior cruciate ligament transection to establish bilateral knee osteoarthritis models.Four weeks after modeling,0.05 mL of 50 and 100 mg/mL calcium silicate solution were injected into the knee joint cavity in the low-dose calcium silicate group and high-dose calcium silicate group,respectively,and 0.05 mL of saline was injected into the knee joint cavity in the saline group,once a week for 4 consecutive weeks.In the fifth week of administration,bilateral knee joint Micro-CT detection,knee joint cartilage hematoxylin-eosin staining,and modified Mankin score were performed.RESULTS AND CONCLUSION:(1)Micro-CT quantitative analysis showed that compared with the healthy group,the volume fraction and number of trabeculae of the medial tibial plateau in the modeling group decreased(P＜0.05),and the separation of trabeculae increased(P＜0.05).Compared with the modeling group,the volume fraction and number of trabeculae of the medial tibial plateau in the low-dose calcium silicate group and the saline group increased(P＜0.05),and the separation of trabeculae decreased(P＜0.05).(2)Hematoxylin-eosin staining showed that the cartilage surface of the healthy group and the low-dose calcium silicate group was relatively smooth and flat,the chondrocytes were evenly distributed,without clustered chondrocytes,the tide line was complete,and the staining was uniform;the cartilage surface of the high-dose calcium silicate group was slightly uneven,the middle and deep cells were disordered,with a small number of clustered chondrocytes,the tide line was discontinuous,and the staining was uneven;the cartilage surface of the saline group and the modeling group was obviously rough,the cells were disordered,with a large number of clustered chondrocytes,the tide line disappeared,and the staining was uneven.The modified Mankin score of the healthy group was lower than that of the high-dose calcium silicate group,the saline group,and the modeling group(P＜0.05).The modified Mankin score of the high-dose calcium silicate group and the low-dose calcium silicate group was lower than that of the saline group and the modeling group(P＜0.05).(3)The results show that calcium silicate knee joint injection has a certain effect in the treatment of knee osteoarthritis.Compared with 100 mg/mL calcium silicate solution,50 mg/mL calcium silicate solution can promote the recovery of subchondral bone and cartilage.

BACKGROUND:Magnetic nanomaterials,as a hot topic in the biomedical field in recent years,are often used to enhance the targeted delivery of drugs to the affected area.OBJECTIVE:To investigate the effects of magnetic nano drug carriers on skeletal muscle injury markers and inflammatory responses in rats with sports injuries.METHODS:Magnetic nanoparticles were prepared.A total of 88 male SD rats were randomly divided into a blank group(n=8),an injury control group(n=32),a Yunnan Baiyao group(n=24),and a magnetic nano-drug carrier group(n=24)by using a random number table method.The latter three groups were modeled with exercise-induced muscle injury(treadmill slope of-16°,running speed of 16 m/min,and training time of 120 min).Immediately after exercise,after verifying the success of the model,Yunnan Baiyao patch was applied to the gastrocnemius muscle of the rats in the Yunnan Baiyao group.Yunnan Baiyao patch loaded with magnetic nanoparticles was applied to the gastrocnemius muscle of the rats in the magnetic nano-drug carrier group.At 24,48,and 120 hours after exercise,blood was drawn from the abdominal aorta of rats to detect the activities of creatine kinase and lactate dehydrogenase,as well as the levels of myoglobin,interleukin-6,and tumor necrosis factor-α.Hematoxylin-eosin staining was used to observe the infiltration of inflammatory cells in the gastrocnemius muscle.RESULTS AND CONCLUSION:(1)Compared with the blank group,the levels of myoglobin,creatine kinase,lactate dehydrogenase and tumor necrosis factorα in the injury control group at 24,48 and 120 hours after exercise were increased(P＜0.05),and the level of interleukin 6 at 24 and 120 hours after exercise was increased(P＜0.05).Compared with the injury control group,the level of myoglobin in the Yunnan Baiyao group at 24 and 48 hours after exercise was decreased(P＜0.05),the activities of creatine kinase and lactate dehydrogenase at 24,48 and 120 hours were decreased(P＜0.05),and the levels of interleukin 6 and tumor necrosis factor α at 120 hours after exercise were decreased(P＜0.05).Compared with the Yunnan Baiyao group,the level of myoglobin in the magnetic nano-drug carrier group at 24 and 48 hours after exercise was decreased(P＜0.05),the activities of creatine kinase and tumor necrosis factor α at 48 and 120 hours after exercise were decreased(P＜0.05),and the lactate dehydrogenase activity was reduced(P＜0.05).(2)Hematoxylin-eosin staining showed that a large number of inflammatory cells infiltrated in the muscle fibers of the injury control group 24 hours after exercise,and then the inflammatory cell infiltration gradually decreased,and the local damaged muscle fibers began to regenerate 120 hours after exercise.A large number of inflammatory cells infiltrated in the muscle fibers of the Yunnan Baiyao group and the magnetic nano-drug carrier group 24 hours after exercise,and then the inflammatory cell infiltration gradually decreased,and the damaged muscle fibers were regenerating 120 hours after exercise,and there was no significant difference from the blank group.(3)The results show that Yunnan Baiyao patch combined with magnetic nanoparticles can accelerate the recovery of exercise-induced muscle injury in rats,and the effect is better than that of Yunnan Baiyao alone.

BACKGROUND:Studies have found that probiotics have a certain preventive and therapeutic effect on peri-implantitis,and there are further explorations in the mechanism against peri-implantitis.OBJECTIVE:To review the mechanism and clinical application of probiotics in the treatment of peri-implantitis.METHODS:Relevant literature was searched on PubMed,Web of Science,CNKI,and WanFang Data,using the search terms of"probiotics,peri-implantitis,flora imbalance,immunoregulation,inflammatory reaction,mechanism of action"in Chinese and English.A total of 90 articles were finally included.RESULTS AND CONCLUSION:Probiotics have the following mechanisms.They can activate the anti-inflammatory mechanism by inhibiting the secretion of inflammatory factors and promoting the production of anti-inflammatory factors.They can destroy the cell wall of pathogenic bacteria by secreting microbial complexes and bacteriocins,reduce the pH value of biofilms,improve the composition of microorganisms in microecology,induce the change of bacterial community structure,and restore the balance of microbial population around implants.They have immunomodulatory effects and can enhance the resistance of the host oral mucosa to pathogenic bacteria in the surrounding area of the implant.In addition,probiotics can produce antibacterial compounds,offset the adhesion of pathogenic microorganisms,and regulate immune function.Through the above mechanisms,probiotics have certain potential in the adjuvant treatment of peri-implantitis,which can improve the clinical parameters of peri-implantitis and affect the microbiota.Probiotic therapy provides a new treatment option,but more long-term prospective studies are needed to further verify its effect.

BACKGROUND:A large number of studies have demonstrated that stem cell exosomes play an important role in the repair of bone defects,either directly as carriers for loading other small molecules or surface modifications,or by binding to biomaterials to promote the repair and regeneration of bone tissue.OBJECTIVE:To summarize the osteogenic mechanisms of stem cell exosomes from different sources and their research progress in bone defect repair.METHODS:Chinese search terms"stem cell,exosome,bone,biomaterial,carrier,bioceramic,polymer,metal,hydrogel,engineered exosome"were used to search CNKI.English search terms"stem cell,exosome,bone defect,biomaterial,carrier,bioceramic,ploymer,metal material,hydrogel,engineering exosome"were used to search PubMed database.According to the inclusion and exclusion criteria,77 relevant articles were finally included for summary.RESULTS AND CONCLUSION:Exosomes from stem cells of different origins can promote osteoblast proliferation and differentiation,promote angiogenesis,and regulate osteoclast activity and macrophage phenotype to promote bone formation and bone mineralization.In addition,many achievements of exosomes in the field of bone defect repair were described from two aspects:biomaterial-assisted exosomes and engineered exosomes.However,the current research on stem cell exosomes in bone tissue engineering is still insufficient,and most of these studies are limited to small animal models,while the treatment of bone defects in large animals,including humans,will be more complex,which will also become a major challenge for the treatment of bone defects.This will also be a great challenge in the dissemination of exosome therapy.