BACKGROUND:One of the advantages of clear aligner treatment is molar distalization.However,tooth tilting movement and loss of anterior anchorage may occur during treatment.There are few studies on whether these problems can be improved by selecting clear aligners with different thicknesses and edges to improve the clinical treatment effect.OBJECTIVE:To analyze the control ability of clear aligners with different thickness and edges on the central incisor,lateral incisor,and second molar when pushing the maxillary second molar distally by three-dimensional finite element analysis.METHODS:Three-dimensional finite element analysis models of bilateral maxillary second molar distalization with clear aligner,maxillary dentition,periodontal ligament,and alveolar bone with different thicknesses and margins were established by Mimics,Geomagic Wrap,3-matic and SolidWorks software,respectively.There were 16 combinations of four thicknesses(0.4,0.5,0.625,and 0.75 mm)and four margins(scallop,straight,straight extension 2 mm and straight extension 4 mm).The data were imported into Ansys Workbench software for design and solution.The mean value,peak value and distribution of the periodontal ligament equivalent stress of the second molar,the equivalent stress and the maximum initial displacement of the second molar,and the control ability of each appliance on the second molar,central incisor,and lateral incisor were analyzed.RESULTS AND CONCLUSION:(1)The mean equivalent stress of periodontal ligament of the second molar,the equivalent stress of the second molar and the maximum initial displacement of the second molar increased with the extension of the appliance edge and the increase of the thickness of the appliance in the 16 groups of models.(2)When the thickness of appliances was the same,the maximum equivalent stress of the second molar in the linear appliance group was the highest,and the maximum equivalent stress of the second molar in the linear extended appliance group was greater than that in the scallop appliance group.When the edge of the appliance was the same,the periodontal ligament equivalent stress peak of the second molar increased with the increase of the thickness of the appliance.The equivalent stress distribution in the periodontal ligament of the second molar in the linear extendable appliance group was more uniform than that in the scallop appliance group and the linear appliance group.(3)When the thickness of the appliance was the same,the scallop-shaped appliance had the worst control on the second molar.When the edge of the appliance was the same,with the increase of the thickness of the appliance,the control of the second molar by the linear extender appliance was gradually stronger than that by the linear appliance.The control of the central incisor was stronger and more stable with the linear extended 2 mm appliance,while the control of the lateral incisor was stronger and more stable with the linear appliance.(4)The results showed that when using clear aligners to push molars distally,extending the edge of the appliance could improve the control of the molars and reduce the tilting movement of the teeth.The design of a straight extension margin of 2 mm for the central incisor and a straight edge for the lateral incisor can enhance the control of the anchorage incisor and reduce the labial inclination of the anterior teeth.

BACKGROUND:The long-term patency rate of synthetic blood vessels remains a significant challenge that requires urgent attention.Enhancing the anticoagulant performance of small-caliber artificial blood vessels is crucial in ensuring their long-term efficacy.OBJECTIVE:To investigate the anticoagulation activity of polycaprolactone/low molecular weight fucoidan nanofibers with shell core structure and determine the effect on the activity of human umbilical vein endothelial cells.METHODS:Polycaprolactone nanofiber membranes and polycaprolactone/low molecular weight fucoidan nanofiber membranes with polycaprolactone as shell layer and low molecular weight fucoidan as core layer were prepared by emulsion electrospinning method(the mass ratio of low molecular weight fucoidan to polycaprolactone was 10％,25％,40％,and 55％,respectively).The morphology and structure of the fibers were characterized by scanning electron microscopy,fluorescence microscopy,and infrared spectroscopy.The mechanical strength of the fiber membranes was detected by tensile test.The loading rate and sustained release rate of low molecular weight fucoidan in the nanofibers were detected by 1,9-dimethylmethylene blue dye.The anticoagulant properties of the fiber membranes were verified by hemolysis test,dynamic coagulation test,plasma recalcification test,and platelet adhesion test.The five fiber membranes were co-cultured with human umbilical vein endothelial cells.The cell proliferation was detected by CCK-8 assay and the cell morphology was observed by fluorescence microscopy.RESULTS AND CONCLUSION:(1)Scanning electron microscope showed that the surface of polycaprolactone/low molecular weight brown algae polysaccharide nanofiber membrane was smooth,the fiber diameter was uniform,and there was no obvious beaded structure.With the increase of low molecular weight brown algae polysaccharide content in the fiber membrane,the diameter of the fiber membrane increased and the maximum tensile stress decreased,but it still met the mechanical properties requirements of small-caliber artificial blood vessels.Fluorescence images and infrared spectra confirmed that low molecular weight brown algae polysaccharide was successfully loaded into polycaprolactone nanofiber membrane,and the low molecular weight brown algae polysaccharide loaded in each group of fiber membranes was released suddenly within 12 hours and released at a relatively low rate after 48 hours.(2)Compared with polycaprolactone nanofiber membrane,polycaprolactone/low molecular weight brown algae polysaccharide nanofiber membrane had better anticoagulant activity,among which the group with a mass ratio of low molecular weight brown algae polysaccharide to polycaprolactone of 25％had the best anticoagulant effect.All five fiber membranes supported the growth and proliferation of human umbilical vein endothelial cells without affecting cell morphology and had no obvious cytotoxicity.(3)The results show that the polycaprolactone/low molecular weight brown algae polysaccharide nanofiber membrane has good anticoagulant function,blood compatibility,and cell compatibility.

BACKGROUND:The local immune microenvironment plays an important regulatory role in the process of bone formation,and the immune system is intricately linked to the skeletal system.OBJECTIVE:To systematically review the promotion of bone regeneration from three aspects:immune cell regulation of microenvironment,regulation of immune response by small extracellular vesicles,and induction of immune response by bone biomaterials,and to elucidate the immune regulatory mechanisms involved in bone regeneration.METHODS:Relevant literature was retrieved from PubMed,CNKI,WanFang Database,and VIP Database,using the search terms of"osteoimmunology,immune microenvironment,small extracellular vesicles,bone regeneration,bone tissue repair,biomaterials,and tissue engineering"in English and Chinese.Repeat and irrelevant literature was screened and removed,and 92 articles that met the criteria were selected for intensive reading and review.RESULTS AND CONCLUSION:Multiple immune cells and bone cells are in the same microenvironment,and immune cells can regulate the differentiation and activity of bone cells,collectively forming an immune microenvironment that affects bone regeneration.Neutrophils can significantly reduce local inflammatory responses in the early stages of bone injury,creating a favorable microenvironment for bone regeneration.M1 macrophages can clear foreign bodies and reduce early inflammatory responses,while M2 macrophages can promote the expression of osteogenic markers and factors,playing an important role in the repair process of bone injury.B cells and T cells can directly or indirectly affect the generation and activity of osteoblasts and osteoclasts,regulate bone metabolism,and promote bone regeneration.Extracellular vesicles of small cells regulate the local immune microenvironment through paracrine secretion,promoting bone formation and angiogenesis at the site of bone injury.The metal ions,surface hydrophilicity,porosity,pore size,surface morphology,and surface roughness on the surface of biomaterials can directly regulate local immune responses,and have anti-inflammatory,angiogenic,and osteogenic effects,thereby accelerating bone regeneration.

BACKGROUND:One of the advantages of clear aligner treatment is molar distalization.However,tooth tilting movement and loss of anterior anchorage may occur during treatment.There are few studies on whether these problems can be improved by selecting clear aligners with different thicknesses and edges to improve the clinical treatment effect.OBJECTIVE:To analyze the control ability of clear aligners with different thickness and edges on the central incisor,lateral incisor,and second molar when pushing the maxillary second molar distally by three-dimensional finite element analysis.METHODS:Three-dimensional finite element analysis models of bilateral maxillary second molar distalization with clear aligner,maxillary dentition,periodontal ligament,and alveolar bone with different thicknesses and margins were established by Mimics,Geomagic Wrap,3-matic and SolidWorks software,respectively.There were 16 combinations of four thicknesses(0.4,0.5,0.625,and 0.75 mm)and four margins(scallop,straight,straight extension 2 mm and straight extension 4 mm).The data were imported into Ansys Workbench software for design and solution.The mean value,peak value and distribution of the periodontal ligament equivalent stress of the second molar,the equivalent stress and the maximum initial displacement of the second molar,and the control ability of each appliance on the second molar,central incisor,and lateral incisor were analyzed.RESULTS AND CONCLUSION:(1)The mean equivalent stress of periodontal ligament of the second molar,the equivalent stress of the second molar and the maximum initial displacement of the second molar increased with the extension of the appliance edge and the increase of the thickness of the appliance in the 16 groups of models.(2)When the thickness of appliances was the same,the maximum equivalent stress of the second molar in the linear appliance group was the highest,and the maximum equivalent stress of the second molar in the linear extended appliance group was greater than that in the scallop appliance group.When the edge of the appliance was the same,the periodontal ligament equivalent stress peak of the second molar increased with the increase of the thickness of the appliance.The equivalent stress distribution in the periodontal ligament of the second molar in the linear extendable appliance group was more uniform than that in the scallop appliance group and the linear appliance group.(3)When the thickness of the appliance was the same,the scallop-shaped appliance had the worst control on the second molar.When the edge of the appliance was the same,with the increase of the thickness of the appliance,the control of the second molar by the linear extender appliance was gradually stronger than that by the linear appliance.The control of the central incisor was stronger and more stable with the linear extended 2 mm appliance,while the control of the lateral incisor was stronger and more stable with the linear appliance.(4)The results showed that when using clear aligners to push molars distally,extending the edge of the appliance could improve the control of the molars and reduce the tilting movement of the teeth.The design of a straight extension margin of 2 mm for the central incisor and a straight edge for the lateral incisor can enhance the control of the anchorage incisor and reduce the labial inclination of the anterior teeth.

BACKGROUND:The long-term patency rate of synthetic blood vessels remains a significant challenge that requires urgent attention.Enhancing the anticoagulant performance of small-caliber artificial blood vessels is crucial in ensuring their long-term efficacy.OBJECTIVE:To investigate the anticoagulation activity of polycaprolactone/low molecular weight fucoidan nanofibers with shell core structure and determine the effect on the activity of human umbilical vein endothelial cells.METHODS:Polycaprolactone nanofiber membranes and polycaprolactone/low molecular weight fucoidan nanofiber membranes with polycaprolactone as shell layer and low molecular weight fucoidan as core layer were prepared by emulsion electrospinning method(the mass ratio of low molecular weight fucoidan to polycaprolactone was 10％,25％,40％,and 55％,respectively).The morphology and structure of the fibers were characterized by scanning electron microscopy,fluorescence microscopy,and infrared spectroscopy.The mechanical strength of the fiber membranes was detected by tensile test.The loading rate and sustained release rate of low molecular weight fucoidan in the nanofibers were detected by 1,9-dimethylmethylene blue dye.The anticoagulant properties of the fiber membranes were verified by hemolysis test,dynamic coagulation test,plasma recalcification test,and platelet adhesion test.The five fiber membranes were co-cultured with human umbilical vein endothelial cells.The cell proliferation was detected by CCK-8 assay and the cell morphology was observed by fluorescence microscopy.RESULTS AND CONCLUSION:(1)Scanning electron microscope showed that the surface of polycaprolactone/low molecular weight brown algae polysaccharide nanofiber membrane was smooth,the fiber diameter was uniform,and there was no obvious beaded structure.With the increase of low molecular weight brown algae polysaccharide content in the fiber membrane,the diameter of the fiber membrane increased and the maximum tensile stress decreased,but it still met the mechanical properties requirements of small-caliber artificial blood vessels.Fluorescence images and infrared spectra confirmed that low molecular weight brown algae polysaccharide was successfully loaded into polycaprolactone nanofiber membrane,and the low molecular weight brown algae polysaccharide loaded in each group of fiber membranes was released suddenly within 12 hours and released at a relatively low rate after 48 hours.(2)Compared with polycaprolactone nanofiber membrane,polycaprolactone/low molecular weight brown algae polysaccharide nanofiber membrane had better anticoagulant activity,among which the group with a mass ratio of low molecular weight brown algae polysaccharide to polycaprolactone of 25％had the best anticoagulant effect.All five fiber membranes supported the growth and proliferation of human umbilical vein endothelial cells without affecting cell morphology and had no obvious cytotoxicity.(3)The results show that the polycaprolactone/low molecular weight brown algae polysaccharide nanofiber membrane has good anticoagulant function,blood compatibility,and cell compatibility.

BACKGROUND:The local immune microenvironment plays an important regulatory role in the process of bone formation,and the immune system is intricately linked to the skeletal system.OBJECTIVE:To systematically review the promotion of bone regeneration from three aspects:immune cell regulation of microenvironment,regulation of immune response by small extracellular vesicles,and induction of immune response by bone biomaterials,and to elucidate the immune regulatory mechanisms involved in bone regeneration.METHODS:Relevant literature was retrieved from PubMed,CNKI,WanFang Database,and VIP Database,using the search terms of"osteoimmunology,immune microenvironment,small extracellular vesicles,bone regeneration,bone tissue repair,biomaterials,and tissue engineering"in English and Chinese.Repeat and irrelevant literature was screened and removed,and 92 articles that met the criteria were selected for intensive reading and review.RESULTS AND CONCLUSION:Multiple immune cells and bone cells are in the same microenvironment,and immune cells can regulate the differentiation and activity of bone cells,collectively forming an immune microenvironment that affects bone regeneration.Neutrophils can significantly reduce local inflammatory responses in the early stages of bone injury,creating a favorable microenvironment for bone regeneration.M1 macrophages can clear foreign bodies and reduce early inflammatory responses,while M2 macrophages can promote the expression of osteogenic markers and factors,playing an important role in the repair process of bone injury.B cells and T cells can directly or indirectly affect the generation and activity of osteoblasts and osteoclasts,regulate bone metabolism,and promote bone regeneration.Extracellular vesicles of small cells regulate the local immune microenvironment through paracrine secretion,promoting bone formation and angiogenesis at the site of bone injury.The metal ions,surface hydrophilicity,porosity,pore size,surface morphology,and surface roughness on the surface of biomaterials can directly regulate local immune responses,and have anti-inflammatory,angiogenic,and osteogenic effects,thereby accelerating bone regeneration.

In recent years， repetitive transcranial magnetic stimulation （rTMS） has garnered significant attention as a therapeutic approach for sleep disorders in the elderly. However， the prevailing rTMS protocols are predominantly developed based on normative neurophysiological data derived from young adults and fail to incorporate individualized parameters tailored to the brain characteristics of the elderly. To address this gap， the consensus development group synthesized the latest evidence from 2010 to 2025 and established a standardized rTMS protocol specifically for elderly patients with sleep disorders. Adhering to the Appraisal of Guidelines for Research and Evaluation II （AGREE II） framework， systematically screened randomized controlled trials （RCTs） and systematic reviews regarding rTMS in the treatment of sleep disorders across various conditions. Meanwhile， the Grading of Recommendations Assessment， Development and Evaluation （GRADE） system was employed to rigorously grade the quality of evidence and the strength of recommendations. This consensus guideline delineates precise rTMS protocols for the management of sleep disorders in the elderly， highlights the adjustment of stimulation intensity according to scalp-cortex distance recommends either MRI‑guided neuronavigation or the Beam F3/F4 heuristic approach for accurate target localization， thereby providing precise rTMS intervention protocol for sleep disorders in the elderly， aiming to enhance clinical efficacy while ensuring treatment safety. ［Funded by National Key Research and Development Program （number， 2023YFC3603200）； General Program of Shenzhen Science and Technology Innovation Commission （number， JCYJ20240813112859008， JCYJ20240813112900002）； Youth Program of Shenzhen Kangning Hospital （number， KN2023A004）； www.guidelines-registry.cn number， PREPARE-2026CN530］

Objective To investigate occupational exposure levels of lead, arsenic and cadmium in the lead smelting plant of Hunan Shui Kou Shan Nonferrous Metals Group Co. Ltd., analyze their effects on health of employees, and compare the applicability of different occupational health risk assessment methods, and to provide a basis for prevention and control of occupational exposure risks in enterprises. Methods According to systematic sampling method, 380 employees with lead, arsenic and cadmium exposure (exposure group) and 100 non-exposure employees (non-exposure group) were selected from 2022 to 2024 for on-site investigation of occupational health [concentration time-weighted average (C_TWA)] and physical examination. The risk was evaluated by qualitative assessment method, the U.S. Environmental Protection Agency (EPA) inhalation risk assessment method, and the Singapore Ministry of Manpower (MOM) semi-quantitative method. The consistency was analyzed by the Kappa test. Results C_TWA values of lead, arsenic, and cadmium in all positions were lower than the occupational exposure limit (OEL). The levels of blood lead, urine arsenic, and urine cadmium, as well as the prevalence of multiple systems in the exposure group were significantly higher than those in the non-exposure group (P<0.05). The proportions of chronic lead, arsenic, and cadmium poisoning were increasing year by year in the exposure group (P<0.05). The qualitative assessment method mainly indicated low and medium risk, while the EPA and MOM methods mainly indicated medium and high risk, with good agreement between the two methods (Kappa=0.676, P<0.05). Conclusion Although the enterprise meets the C_TWA standards, there are still occupational health risks of lead, arsenic, and cadmium. The EPA inhalation risk assessment method is more applicable.

Objective To explore the prevalence of depressive symptoms in postoperative patients with ovarian cancer and to analyze its influencing factors from multiple dimensions, including clinical characteristics, psychological factors, and laboratory indicators. Methods A cross-sectional study was conducted, which enrolled 235 postoperative patients with ovarian cancer. Depressive status was assessed using the patient health questionnaire, and the demographic, pathological, and medical record data of the patients were collected using the generalized anxiety disorder scale, Pittsburgh sleep quality index, European organization for research and treatment of cancer quality of life questionnaire core 30, and ECOG performance status score. Peripheral blood tumor marker (CA125), routine blood test, lymphocyte subsets, and serum cytokine levels were measured. Univariate and multivariate binary logistic regression analysis were used for statistical analysis. Results The prevalence of depression in postoperative patients with ovarian cancer was 39.15% (92/235). Univariate analysis showed that ECOG score ≥ 2 points, pain, anxiety, poor sleep quality, low quality of life, low life satisfaction, tumor recurrence, six or more cycles of chemotherapy, as well as higher levels of CA125, NLR, and NAR, and lower hemoglobin levels were significantly associated with depression (all P<0.05). Multivariate binary Logistic regression analysis showed that anxiety (OR=1.975, 95%CI: 1.231-3.170), sleep efficiency (OR=4.181, 95%CI: 1.211-14.43), sleep latency (OR=34.806, 95%CI: 4.258-284.542), ECOG performance status score, cognitive function (OR=0.918, 95%CI: 0.868-0.97), and life satisfaction were independent risk factors for depression (all P<0.05). Laboratory indicators were not independent influencing factors in the multivariate Logistic regression model. Conclusion Depression in postoperative patients with ovarian cancer is influenced by physiological, psychological, and social factors. Clinical management should focus on patients with anxiety, sleep disorders, poor physical condition, and low life satisfaction, and a comprehensive prevention and treatment strategy centered on psychological intervention and taking into account symptom management and social support should be implemented.

ObjectiveTo investigate the epidemiological and clinical characteristics of human bocavirus (HBoV) in hospitalized children with acute lower respiratory tract infection (ALRTI) at a single-center children’s hospital in Shanghai, thereby providing evidence for the diagnosis, treatment, and prevention of HBoV infection. MethodsA retrospective study was conducted on 19 537 hospitalized children with ALRTI at Shanghai Children’s Hospital from January 2021 to December 2023. Multiplex polymerase chain reaction (PCR) combined with capillary electrophoresis was used to detect HBoV and 12 other common respiratory viruses /atypical pathogens. The positive detection rate, demographic characteristics (sex, age), temporal distribution (year, season) of HBoV, as well as the clinical characteristics of severe and non-severe pneumonia were analyzed. ResultsThe overall HBoV-positive rate was 2.57% (503/19 537), with 59.44% (299/503) being single infections and 40.56% (204/503) being co-infections. The positive detection rate was significantly higher in boys than that in girls (2.78% vs 2.33%, χ²=3.88, P=0.049). The highest infection rate was observed in toddlers, followed by infants (χ²=379.57, P<0.001). The positive rate peaked in 2021 and reached its lowest point in 2023 (χ²=45.49, P<0.001), with epidemics mainly prevalent in summer and autumn. The main clinical symptoms were cough (90.06%, 453/503), fever (75.94%, 382/503), and wheezing (39.96%, 201/503). Children with severe pneumonia showed a higher incidence of wheezing compared with the non-severe group (P<0.001), while underlying diseases and co-infections had no significant association with disease severity (P>0.05). ConclusionHBoV was an important pathogen of ALRTI in children, predominantly affecting infants and toddlers, with higher susceptibility in boys and seasonal peaks in autumn and summer. The main clinical manifestations included cough, fever, and wheezing, with wheezing being more prevalent in children with severe pneumonia.