Objective:To analyse the impact of diagnosis-related groups (DRG) payment reform on the length of stay and hospitalisation expenses of patients in pilot medical institutions of Beijing, for references for the formulation and optimisation of DRG payment related policies.Methods:The home page data of inpatient medical records from 56 medical institutions that implemented DRG payment in Beijing from April to October 2021 (before DRG payment reform) and April to October 2022 (after DRG payment reform). Patients participating in the basic medical insurance for urban employees in Beijing were selected as the reform group, and others served as the control group. The difference-in-differences model (DID) were used to analyse the related indicators, to evaluate the effectiveness of the reform.Results:This study comprised a total of 3 294 003 inpatients. Of them, 1 714 134 cases were in the control group (911 100 cases before the reform and 803 034 cases after) and 1 579 869 cases were in the study group (802 899 cases before the reform and 776 970 cases after). The gender, age composition and treatment methods of patients changed little before and after the reform. But the proportion of patients with severe comorbidities or complications rose from 11.11% before the reform to 13.19% after the reform. Through the analysis of the DID model, the DRG payment reform could reduce the length of stay ( P=0.001) and hospitalization expenses of patients ( P<0.001), and played a certain optimising role in the cost structure. Among them, the proportion of medical service expenses did not change significantly ( P=0.977), the proportion of inspection and testing expenses, as well as drug expenses decreased slightly ( P=0.001, P=0.004), and the proportion in consumable expenditures increased slightly ( P=0.001). Conclusions:DRG payment reform played a positive role in shortening the length of stay and hospitalization expenses. It was suggested that medical institutions in Beijing should further optimize the structure of patient hospitalization expenses, with a focus on exploring effective ways to increase the medical service revenue and reasonably control the consumables costs.

Objective:To analyse the impact of diagnosis-related groups (DRG) payment reform on the length of stay and hospitalisation expenses of patients in pilot medical institutions of Beijing, for references for the formulation and optimisation of DRG payment related policies.Methods:The home page data of inpatient medical records from 56 medical institutions that implemented DRG payment in Beijing from April to October 2021 (before DRG payment reform) and April to October 2022 (after DRG payment reform). Patients participating in the basic medical insurance for urban employees in Beijing were selected as the reform group, and others served as the control group. The difference-in-differences model (DID) were used to analyse the related indicators, to evaluate the effectiveness of the reform.Results:This study comprised a total of 3 294 003 inpatients. Of them, 1 714 134 cases were in the control group (911 100 cases before the reform and 803 034 cases after) and 1 579 869 cases were in the study group (802 899 cases before the reform and 776 970 cases after). The gender, age composition and treatment methods of patients changed little before and after the reform. But the proportion of patients with severe comorbidities or complications rose from 11.11% before the reform to 13.19% after the reform. Through the analysis of the DID model, the DRG payment reform could reduce the length of stay ( P=0.001) and hospitalization expenses of patients ( P<0.001), and played a certain optimising role in the cost structure. Among them, the proportion of medical service expenses did not change significantly ( P=0.977), the proportion of inspection and testing expenses, as well as drug expenses decreased slightly ( P=0.001, P=0.004), and the proportion in consumable expenditures increased slightly ( P=0.001). Conclusions:DRG payment reform played a positive role in shortening the length of stay and hospitalization expenses. It was suggested that medical institutions in Beijing should further optimize the structure of patient hospitalization expenses, with a focus on exploring effective ways to increase the medical service revenue and reasonably control the consumables costs.

Objective:To optimize the diagnosis-related groups (DRG) weight calculation method based on the perspective of hospital performance evaluation and the high-quality development orientation of public hospitals.Methods:Using the first page data of 3 256 701 inpatient medical records from secondary and tertiary hospitals in Beijing from January to December 2021, three algorithms including payment DRG weight, five-category DRG weight, and optimized DRG weight were used to calculate the weights of each DRG, and the differences between different algorithms were analyzed. The case-mix index (CMI) of the entire hospital and the clinical specialties to which the key DRG belongs in secondary and tertiary hospitals was calculated by using the three DRG weight algorithms, to reflect the performance evaluation results of different algorithms.Results:The results of one-way ANOVA showed that there was a significant difference ( P=0.019) among the three DRG weight algorithms. Comparing the optimized DRG weight with the payment DRG weight, the weight of BD29 (neural stimulator implantation or removal surgery) in the key DRG decreased from 7.77 to 4.61, and the weight of LA19 (renal tumor surgery) increased from 2.06 to 2.58; Compared with the five-category DRG weight, the weight of ES31 (respiratory infection/inflammation with severe complications or comorbidities) decreased from 2.36 to 1.72, and the weight of CB39 (crystalloid surgery) increased from 0.22 to 0.30. Comparing the use of optimized DRG weights and five-category DRG weights to calculate CMI, all types of hospitals and clinical specialties showed varying degrees of improvement in CMI. The CMI of tertiary hospitals increased from 1.02 to 1.20, and the CMI of secondary hospitals increased from 0.88 to 0.95. The difference in CMI between secondary and tertiary hospitals was even more pronounced. Conclusions:Optimized DRG weights could better reflect the value of medical technology compared with the payment DRG weights. Compared to five-category DRG weights, optimized DRG weights could better reflect the differences in CMI of different levels of hospitals.

Purpose: This study compared the efficacy of heat insulation between 5% dextrose and 0.9% saline in radiofrequency ablation (RFA). Accordingly, temperature variations and maximum temperatures were assessed at identical distances and heat field distributions. Methods: Cubes of porcine liver tissue, measuring 10 mm across, were selected to precisely align the ablation boundary with the tissue boundary. An 18-gauge electrode with a 7-mm tip was inserted into each cube (10 per group) in a stainless-steel cup containing 40 mL of 5% dextrose or 0.9% saline. Fixed ablation was performed for 3 minutes using continuous mode at 30 W, simulating the typical thermal environment during thyroid RFA. Real-time temperature measurements were recorded by sensors positioned 0, 1, 3, and 5 mm from the cube’s edge. A comparative analysis was conducted to assess the maximum temperature, temperature variation, and duration of temperatures exceeding 42℃. Results: In both groups, the temperature curve declined with increasing distance from the edge of the ablated tissue. However, 0.9% saline exhibited higher maximum temperatures at 1, 3, and 5 mm compared to 5% dextrose (1 mm: 44.55°C±5.25°C vs. 34.68°C±3.07°C; 3 mm: 39.64°C±2.53°C vs. 29.22°C±2.21°C; 5 mm: 38.86°C±2.14°C vs. 28.74°C±2.51°C; all P<0.001). Considering a nerve injury threshold of 42°C, the 0.9% saline also displayed a greater proportion of samples reaching this temperature and a longer duration of temperatures exceeding it (P<0.05). Conclusion The heat insulation efficacy of 5% dextrose at 1-5 mm exceeds that of 0.9% saline at identical distances and in a common thermal environment during thyroid RFA.

Purpose: This study compared the efficacy of heat insulation between 5% dextrose and 0.9% saline in radiofrequency ablation (RFA). Accordingly, temperature variations and maximum temperatures were assessed at identical distances and heat field distributions. Methods: Cubes of porcine liver tissue, measuring 10 mm across, were selected to precisely align the ablation boundary with the tissue boundary. An 18-gauge electrode with a 7-mm tip was inserted into each cube (10 per group) in a stainless-steel cup containing 40 mL of 5% dextrose or 0.9% saline. Fixed ablation was performed for 3 minutes using continuous mode at 30 W, simulating the typical thermal environment during thyroid RFA. Real-time temperature measurements were recorded by sensors positioned 0, 1, 3, and 5 mm from the cube’s edge. A comparative analysis was conducted to assess the maximum temperature, temperature variation, and duration of temperatures exceeding 42℃. Results: In both groups, the temperature curve declined with increasing distance from the edge of the ablated tissue. However, 0.9% saline exhibited higher maximum temperatures at 1, 3, and 5 mm compared to 5% dextrose (1 mm: 44.55°C±5.25°C vs. 34.68°C±3.07°C; 3 mm: 39.64°C±2.53°C vs. 29.22°C±2.21°C; 5 mm: 38.86°C±2.14°C vs. 28.74°C±2.51°C; all P<0.001). Considering a nerve injury threshold of 42°C, the 0.9% saline also displayed a greater proportion of samples reaching this temperature and a longer duration of temperatures exceeding it (P<0.05). Conclusion The heat insulation efficacy of 5% dextrose at 1-5 mm exceeds that of 0.9% saline at identical distances and in a common thermal environment during thyroid RFA.

Purpose: This study compared the efficacy of heat insulation between 5% dextrose and 0.9% saline in radiofrequency ablation (RFA). Accordingly, temperature variations and maximum temperatures were assessed at identical distances and heat field distributions. Methods: Cubes of porcine liver tissue, measuring 10 mm across, were selected to precisely align the ablation boundary with the tissue boundary. An 18-gauge electrode with a 7-mm tip was inserted into each cube (10 per group) in a stainless-steel cup containing 40 mL of 5% dextrose or 0.9% saline. Fixed ablation was performed for 3 minutes using continuous mode at 30 W, simulating the typical thermal environment during thyroid RFA. Real-time temperature measurements were recorded by sensors positioned 0, 1, 3, and 5 mm from the cube’s edge. A comparative analysis was conducted to assess the maximum temperature, temperature variation, and duration of temperatures exceeding 42℃. Results: In both groups, the temperature curve declined with increasing distance from the edge of the ablated tissue. However, 0.9% saline exhibited higher maximum temperatures at 1, 3, and 5 mm compared to 5% dextrose (1 mm: 44.55°C±5.25°C vs. 34.68°C±3.07°C; 3 mm: 39.64°C±2.53°C vs. 29.22°C±2.21°C; 5 mm: 38.86°C±2.14°C vs. 28.74°C±2.51°C; all P<0.001). Considering a nerve injury threshold of 42°C, the 0.9% saline also displayed a greater proportion of samples reaching this temperature and a longer duration of temperatures exceeding it (P<0.05). Conclusion The heat insulation efficacy of 5% dextrose at 1-5 mm exceeds that of 0.9% saline at identical distances and in a common thermal environment during thyroid RFA.

Purpose: This study compared the efficacy of heat insulation between 5% dextrose and 0.9% saline in radiofrequency ablation (RFA). Accordingly, temperature variations and maximum temperatures were assessed at identical distances and heat field distributions. Methods: Cubes of porcine liver tissue, measuring 10 mm across, were selected to precisely align the ablation boundary with the tissue boundary. An 18-gauge electrode with a 7-mm tip was inserted into each cube (10 per group) in a stainless-steel cup containing 40 mL of 5% dextrose or 0.9% saline. Fixed ablation was performed for 3 minutes using continuous mode at 30 W, simulating the typical thermal environment during thyroid RFA. Real-time temperature measurements were recorded by sensors positioned 0, 1, 3, and 5 mm from the cube’s edge. A comparative analysis was conducted to assess the maximum temperature, temperature variation, and duration of temperatures exceeding 42℃. Results: In both groups, the temperature curve declined with increasing distance from the edge of the ablated tissue. However, 0.9% saline exhibited higher maximum temperatures at 1, 3, and 5 mm compared to 5% dextrose (1 mm: 44.55°C±5.25°C vs. 34.68°C±3.07°C; 3 mm: 39.64°C±2.53°C vs. 29.22°C±2.21°C; 5 mm: 38.86°C±2.14°C vs. 28.74°C±2.51°C; all P<0.001). Considering a nerve injury threshold of 42°C, the 0.9% saline also displayed a greater proportion of samples reaching this temperature and a longer duration of temperatures exceeding it (P<0.05). Conclusion The heat insulation efficacy of 5% dextrose at 1-5 mm exceeds that of 0.9% saline at identical distances and in a common thermal environment during thyroid RFA.

Purpose: This study compared the efficacy of heat insulation between 5% dextrose and 0.9% saline in radiofrequency ablation (RFA). Accordingly, temperature variations and maximum temperatures were assessed at identical distances and heat field distributions. Methods: Cubes of porcine liver tissue, measuring 10 mm across, were selected to precisely align the ablation boundary with the tissue boundary. An 18-gauge electrode with a 7-mm tip was inserted into each cube (10 per group) in a stainless-steel cup containing 40 mL of 5% dextrose or 0.9% saline. Fixed ablation was performed for 3 minutes using continuous mode at 30 W, simulating the typical thermal environment during thyroid RFA. Real-time temperature measurements were recorded by sensors positioned 0, 1, 3, and 5 mm from the cube’s edge. A comparative analysis was conducted to assess the maximum temperature, temperature variation, and duration of temperatures exceeding 42℃. Results: In both groups, the temperature curve declined with increasing distance from the edge of the ablated tissue. However, 0.9% saline exhibited higher maximum temperatures at 1, 3, and 5 mm compared to 5% dextrose (1 mm: 44.55°C±5.25°C vs. 34.68°C±3.07°C; 3 mm: 39.64°C±2.53°C vs. 29.22°C±2.21°C; 5 mm: 38.86°C±2.14°C vs. 28.74°C±2.51°C; all P<0.001). Considering a nerve injury threshold of 42°C, the 0.9% saline also displayed a greater proportion of samples reaching this temperature and a longer duration of temperatures exceeding it (P<0.05). Conclusion The heat insulation efficacy of 5% dextrose at 1-5 mm exceeds that of 0.9% saline at identical distances and in a common thermal environment during thyroid RFA.

Humans ; Thyrotoxicosis/chemically induced* ; Amiodarone

Objective:To evaluate the feasibility and applicability of using phospholipid-hybridization method for preparing biomimetic microbubbles (Bio-MBs) ultrasound contrast agents.Methods:Leukocyte biomimetic microbubbles (MB leu), platelet biomimetic microbubbles (MB pla) and erythrocyte biomimetic microbubbles (MB ery) were prepared by multiple steps: film-hydration, phospholipid-hybridization, mechanical oscillation. The size and zeta potential of Bio-MBs were measured by dynamic light scattering. A laser scanning confocal microscopy experiment was performed to confirm the presence of membrane proteins on the shell of Bio-MBs. The fluorescence of FITC-labeled typical membrane protein was evaluated using a flow cytometer. Sodium dodecyl sulfate polyacrylamide gel electrophoresis was used to characterize the membrane protein. Biosafety of Bio-MBs was evaluated by CCK-8 counting kit, blood and major organs. The contrast enhancement effect and stability were observed in vitro and in vivo. An in vivo fluorescence imaging system was performed to evaluate the distribution of Bio-MBs. The application value of biomimetic microbubbles was measured by ultrasound molecular imaging by using ischemia-reperfusion rat models and acute hepatitis rat models. Results:Bio-MBs with spherical shape distributed homogenously, without obvious aggregation. The membrane proteins were successfully integrated into the shell of Bio-MBs.The diameter of three Bio-MBs was similar to that of control microbubbles (MB con) ( P>0.05), three Bio-MBs had a lower zeta potential than MB con ( P<0.05). The Bio-MBs had an appreciable performance in vitro and in vivo biosafety. The Bio-MBs retained the main proteins inherited from cell membrane. Contrast enhanced ultrasound imaging in vitro and in vivo showed that the Bio-MBs had a stable imaging ability.MB leu and MB pla have good targeted imaging effect in two disease models. Conclusions:A series of Bio-MBs ultrasound contrast agents, which have high stability, biosafety and targeted imaging efficiency, were successfully prepared by using phospholipid-hybridization method. This fabrication method for obtaining Bio-MBs can be applied to different clinical scenarios with different cell types in the future.