This study aims to comprehensively analyze the material basis of toad visceral oil(hereafter referred to as toad oil), and explore the pharmacological effect of toad oil on atopic dermatitis(AD). Ultra-high performance liquid chromatography-linear ion trap/orbitrap high-resolution mass spectrometry(UHPLC-LTQ-Orbitrap-MS) and gas chromatography-mass spectrometry(GC-MS) were employed to comprehensively identify the chemical components in toad oil. The animal model of AD was prepared by the hapten stimulation method. The modeled animals were respectively administrated with positive drug(0.1% hydrocortisone butyrate cream) and low-and high-doses(1%, 10%) of toad oil by gavage. The effect of toad oil on AD was evaluated with the AD score, ear swelling rate, spleen index, and pathological section results as indicators. A total of 99 components were identified by UHPLC-LTQ-Orbitrap-MS, including 14 bufadienolides, 7 fatty acids, 6 alkaloids, 10 ketones, 18 amides, and other compounds. After methylation of toad oil samples, a total of 20 compounds were identified by GC-MS. Compared with the model group, the low-and high-dose toad oil groups showed declined AD score, ear swelling rate, and spleen index, alleviated skin lesions, and reduced infiltrating mast cells. This study comprehensively analyzes the chemical composition and clarifies the material basis of toad oil. Meanwhile, this study proves that toad oil has a good therapeutic effect on AD and is a reserve resource of traditional Chinese medicine for external use in the treatment of AD.
Animals ; Dermatitis, Atopic/immunology* ; Disease Models, Animal ; Mice ; Male ; Gas Chromatography-Mass Spectrometry ; Humans ; Bufonidae ; Oils/administration & dosage* ; Chromatography, High Pressure Liquid ; Female ; Mice, Inbred BALB C

OBJECTIVE: To investigate the safety and efficacy of avatrombopag（AVA） combined with rhIL-11 in treating thrombocytopenia induced by chemotherapy in acute myeloid leukemia. METHODS: The clinical information of 8 patients in the real world who received avatrombopag combined with rhIL-11 in cancer treatment-induced thrombocytopenia(CTIT) after AML chemotherapy were retrospectively analyzed, and at the same time, 8 patients who received rhIL-11 only in CTIT after AML chemotherapy served as the control group, A preliminary observation was to summarize and compare the therapeutic efficacy and adverse effects between the two groups. RESULTS: D3 and D7 platelet counts were not significantly different between the observation group and the control group after treatment. The platelet counts in the observation group was significantly higher than those of the control group on the 10th day after treatment (P < 0.01). The adverse reactions, such as weakness, abdominal pain, fatigue, nausea and edema after treatment were mild in the observation group and the control group. Except for one patient in the observation group who had a history of cerebral infarction before the onset of the disease and was routinely taking antiplatelet drugs, no thrombosis events occurred in the patients in the observation and control groups during the period of administration of the drug, and the total incidence rate of adverse reactions was not significantly different between the two groups. CONCLUSION The combination of AVA and rhIL-11 can enhance platelet recovery in CTIT of AML patients after chemotherapy. Compared with the rhIL-11 alone group, the platelet recovery time in AVA+rhIL-11 group was significantly shorter, the platelet count on the 10th day after drug administration was significantly higher. No statistically significant difference in the total incidence rate of adverse reactions was observed between rhIL-11 alone group and AVA+rhIL-11 group.
Humans ; Leukemia, Myeloid, Acute/drug therapy* ; Thrombocytopenia/chemically induced* ; Interleukin-11/therapeutic use* ; Retrospective Studies ; Adult ; Thiophenes/therapeutic use* ; Platelet Count ; Female ; Male ; Middle Aged ; Thiazoles

Ultrasound technology has been applied in the biomedical field,particularly in drug delivery and cell processing.In this study,the effects of different ultrasound power levels(40 W to 100 W)and time durations(1 min,5 min,or 5 min discontinuously)on the morphology of human red blood cells(hRBCs)membranes were systematically investigated using cryo-electron tomography(Cryo-ET).The hRBCs membranes were firstly subjected to ultrasound at power levels of 40 W and 60 W for 5 min each.Cryo-ET observations revealed minimal morphological changes in the hRBCs membranes following the 40 W treatment,with the membrane structure remaining relatively intact and only minor undulations appearing on the membrane surface.These undulations might result from the mild mechanical stress induced by ultrasound,which was insufficient to disrupt the overall membrane structure.At power of 60 W,the hRBCs membranes largely preserved their structural integrity.When the ultrasonic power was increased to 80 W,the structural damage to the hRBCs membranes became more severe.Cryo-ET images showed irregular ruptures and larger pores on the membrane surface,indicating a significant compromise in membrane integrity.At ultrasound power of 100 W,the hRBCs membranes were completely disrupted,resulting in the formation of numerous membrane fragments,and a complete loss of membrane continuity.To further explore the effects of ultrasound duration on erythrocyte membrane morphology,the ultrasonic power was fixed at 100 W and the impacts of varying treatment durations(1 min,5 min,and intermittent ultrasound)on the membrane structure were systematically investigated.After 1 min of ultrasonic treatment,Cryo-ET images showed minimal changes in erythrocyte membrane morphology.Although some small pores and undulations appeared on the membrane surface,the overall structure remained relatively intact.As the ultrasound duration extended to 5 min,the degree of membrane damage increased significantly.Cryo-ET images revealed extensive rupture and detachment of the membrane,with continuity being severely compromised.As to treatment alternating 1 min of ultrasound with 1 min of rest,for a total of 5 min of ultrasound exposure,Cryo-ET observations showed the integrity of the membrane-cytoskeleton attachment remained.Under intermittent ultrasound treatment,although some pores and ruptures were observed on the membrane surface,the overall structure remained more intact compared to continuous ultrasonic treatment.This preservation might be due to the intermittent treatment providing buffer periods for the membrane,allowing partial recovery after mechanical stress,thereby reducing the cumulative damage caused by continuous ultrasound.This work provided experimental basis for further understanding of mechanism of ultrasound induced change of cell membrane and cytoskeleton.

Poly(lactic-co-glycolide)(PLGA)is a key excipient in long-acting sustained-release preparations,and its degradation properties directly affect the drug release behavior.In this study,PLGA microspheres were prepared by microfluidic techniques,and the morphology changes of the microspheres were observed by scanning electron microscopy(SEM).In alkaline environment,due to the accelerated hydrolysis of ester bonds,the surface of the microspheres was rapidly dissolved and eroded,and the degradation rate was significantly higher than that in acidic environment.High temperature accelerated the degradation of PLGA microspheres.Under neutral and alkaline conditions,the microspheres showed aggregation and adhesion.Under acidic conditions,the microspheres gradually decomposed into irregular fragments.The high ionic strength further promoted the surface corrosion of the microspheres,especially under extreme pH conditions.Simultaneously,PLGA microspheres encapsulating coumarin were prepared to simulate the microsphere formulation.The release rate of coumarin after degradation of the microspheres under different conditions was observed by measuring the absorbance with ultraviolet-visible spectrophotometry.The results were consistent with those of the blank microspheres.This study revealed that the degradation of PLGA microspheres was significantly pH-dependent,temperature sensitive and ion strength responsive.These findings not only helped to understand and optimize the long-term stability and controlled release performance of drug-carrying microspheres,but also provided a theoretical basis for further improvement of PLGA-based drug carrier design.

The scaphoid bone is one of the important bone of hand,which is frequently injured and difficult to treat in clinical practice.Therefore,it is very important to deeply study the microstructure and biomechanical characteristics of the scaphoid bone for understanding its injury mechanism and optimizing treatment scheme.Microcomputed tomography(micro-CT)provides high-resolution imaging of bone tissue,while finite element analysis can help to simulate the stress distribution and behavioral patterns of the scaphoid bone under various physiological and pathological states.The high-resolution three-dimensional image of the scaphoid bone obtained by micro-CT technology can be used to construct finite element models of real anatomical structure of the scaphoid bone,thus achieving accurate simulation of the mechanical properties of the scaphoid bone.The fusion of these two advanced technologies provides a new perspective for revealing the structural and functional relationships and injury mechanism of the scaphoid bone.Therefore,this paper reviews the anatomical characteristics of the scaphoid bone and its biomechanical behavior in different states,emphasizing the specific applications and advantages of micro-CT and finite element analysis techniques in the study of the scaphoid bone.By summarizing the research findings in recent years,this paper provides novel scientific basis and methods for the diagnosis,treatment,and prevention of scaphoid bone-related disorders.

The scaphoid bone is one of the important bone of hand,which is frequently injured and difficult to treat in clinical practice.Therefore,it is very important to deeply study the microstructure and biomechanical characteristics of the scaphoid bone for understanding its injury mechanism and optimizing treatment scheme.Microcomputed tomography(micro-CT)provides high-resolution imaging of bone tissue,while finite element analysis can help to simulate the stress distribution and behavioral patterns of the scaphoid bone under various physiological and pathological states.The high-resolution three-dimensional image of the scaphoid bone obtained by micro-CT technology can be used to construct finite element models of real anatomical structure of the scaphoid bone,thus achieving accurate simulation of the mechanical properties of the scaphoid bone.The fusion of these two advanced technologies provides a new perspective for revealing the structural and functional relationships and injury mechanism of the scaphoid bone.Therefore,this paper reviews the anatomical characteristics of the scaphoid bone and its biomechanical behavior in different states,emphasizing the specific applications and advantages of micro-CT and finite element analysis techniques in the study of the scaphoid bone.By summarizing the research findings in recent years,this paper provides novel scientific basis and methods for the diagnosis,treatment,and prevention of scaphoid bone-related disorders.

Objective A simple,sensitive and rapid ultra high performance liquid chromatography tandem mass spectrometry(UPLC-MS/MS)method was developed and validated for the determination of ertapenem in human plasma.Methods Using ertapenem-D4 as internal standard,the protein in plasma was precipitated with acetonitrile;chromatographic column:ACQUITY HSS T3(2.1 mm × 50.0 mm,1.8 μm);the mobile phase was 0.1％formic acid aqueous solution(containing 2 mmol·L-1 ammonium formate)-acetonitrile(0.1％formic acid),using a gradient elution;flow rate:0.4 mL·min-1,injection volume:1 μL,column temperature:45 ℃,the analysis time was 4.5 min,the scanning mode is positive ion selective reaction monitoring mode(SRM)with an electric spray ion source(ESI).The specificity,standard curve and lower limit of quantification,precision and recovery,matrix effect,dilution effect and stability were investigated.Results Ertapenem had a good linearity within 0.5-80.0μg·mL-1,and the standard curve was y=4.25 × 10-1x-2.64× 10-2(r2=0.999 0),the lower limit of quantification was 0.5 μg·mL-1,the relative standard deviation within and between batches is 1.39％-4.15％.The extraction recovery rate was 58.36％-64.57％,and the relative standard deviation of dilution effect was 3.30％,and the matrix effect was 99.71％-103.23％.The relative standard deviation of room temperature,repeated freeze-thaw,4 ℃,and long-term stability are all less than 10％.Conclusion The method is sensitive,rapid and specific,which is suitable for clinical monitoring of Ertapenem.

Spinal surgical site infection (SSI), especially deep SSI after internal fixation is difficult in treatment, with long course of disease and poor prognosis. At present, there are many controversies in the diagnosis and treatment of spinal SSI, with unsatisfactory overall efficacy of its diagnosis and treatment. Besides, no diagnosis and treatment guideline based on evidence-based medicine has been in existence. To this end, the Spinal Infection Group of the Orthopedic Branch of the Chinese Medical Doctor Association and the Spinal Infection Group of the Spinal Surgery Branch of the Chinese Rehabilitation Medicine Association jointly organized relevant experts to formulate Evidence-based clinical guideline for the diagnosis and treatment of surgical site infection in spinal trauma ( version 2024) based on an evidence-based approach. A total of 10 recommendations were proposed on the diagnosis and treatment of spinal SSI, so as to provide a clinical reference for the diagnosis and treatment of spinal SSI.

Objective To compare the effectiveness of TiRobot assisted F screw technique and inverted triangle parallel nail internal fixation in the treatment of unstable femoral neck fractures.Methods A retrospective analysis was conducted on 72 patients with unstable femoral neck fractures who were treated with percutaneous cannulated screw fixation assisted with TiRobot Orthopaedic robot from December 2019 to April 2021.Among them,37 patients were treated with F screw internal fixa-tion,including 16 males and 21 females,aged47 to 64years old with an average of(53.87±5.28)years old;According to Pauwels classification,there were 1 case of type Ⅰ,19 cases of type Ⅱ,17 cases of type Ⅲ;8 cases of combined medical diseases;17 cases of falling,8 cases of traffic accident and 12 cases of falling from height;The time from injury to operation was 29 to 49 hours with average of(35.00±7.34)hours.Another 35 cases used internal fixation with an inverted triangle parallel nail,including 13 males and 22 females with an average age of 46 to 63 years old(52.36±5.05)years old;According to the Pauwels injury classifi-cation:there were 2 cases of type Ⅰ,21 cases of type Ⅱ,12 cases of type Ⅲ;6 cases of medical diseases,15 cases of falling in-jury,9 cases of traffic accident,11 cases of falling injury;The time from injury to operation was 30 to 45 hours with an average of(33.00±6.83)h.The intraoperative blood loss,operation time,intraoperative fluoroscopy times,follow-up time,fracture healing time,postoperative complications were observed and compared between the two groups.The hip joint function was e-valuated by Harris score at 6 months and 12 months after operation.Results There was no significant difference in operation time,intraoperative blood loss,intraoperative fluoroscopy times and other intraoperative data between two groups(P＞0.05).Both groups were followed up regularly,and the follow-up time was 12 to 16 months.The fracture healing time and Harris score of the F screw internal fixation group were better than those of the inverted triangle parallel nail internal fixation group(P＜0.05).There was 1 case of femoral neck shortening in the F screw internal fixation group,1 case of nonunion,1 case of nail withdrawal,and 1 case of lower extremity deep vein thrombosis in the inverted triangle internal fixation group.The incidence of complications in the F screw internal fixation group was lower than that in the inverted triangle parallel nail internal fixation group(P＜0.05).Conclusion Percutaneous cannulated F screw technique using Tirobot navigation positioning system is a safe and effective treatment for patients with unstable femoral neck fractures.It can significantly shorten the fracture healing time,reduce the incidence of postoperative complications,significantly improve hip joint function,and improve the quality of life.

Objective To develop a biological safety protection third-level(BSL-3)laboratory based on folding-modular shelters to solve the problems of the existing laboratories in space and function expansion,large-scale deployment and low-cost transportation.Methods The BSL-3 laboratory was composed of a folding combined shelter module,a ventilation and purification module,a power supply and distribution module,a monitoring and communication module,a control system module and an equipment module.The folding combined shelter module used a leveling base frame as the foundation and a lightweight panel as the enclosure mechanism,and was divided into an auxiliary area and a protection protected area;the ventilation and purification module was made up of an air supply unit and an air exhaust unit,the air supply unit was integrated with a fresh-air air conditioner and the exhaust unit was equipped with a main fan,a standby fan and a bag in/bag out filter;the control system module adopted a supervision mode of decentralized control and centralized management,which executed communication with the data server as the center and Profinet protocol and MODBUS-TCP.Results The BSL-3 laboratory proved to meet the requirements of relevant standards in internal microenvironment,airflow direction,airtightness,working condition and disinfection effect.Conclusion The BSL-3 laboratory is compatible with large-scale transport and deployment and facilitates reliable and safe experiments for epidemic prevention and control and cross-regional support.[Chinese Medical Equipment Journal,2024,45(3):41-46]