OBJECTIVE To explore the improvement effect and potential mechanism of modified Yanghe decoction on bone destruction in rats with breast cancer bone metastasis based on the receptor-interacting serine/threonine-protein kinase 1 （RIPK1）/RIPK3 pathway. METHODS The rat model of breast cancer bone metastasis was established by injecting a suspension of breast cancer cells into the bone marrow cavity. The rats with successful modeling were randomly divided into a model group （intragastric administration of equal volume of normal saline）， modified Yanghe decoction low-， medium-， and high-dose groups （intragastric administration of corresponding decoction at 1.30， 2.60 and 5.20 g/kg， calculated by the dosage of crude drug）， high-dose modified Yanghe decoction+si-RIPK1 group （intragastric administration of corresponding decoction at 5.20 g/kg， calculated by the dosage of crude drug； simultaneous injection of small interfering RNA for RIPK1 via the tail vein）， and high-dose modified Yanghe decoction+si-NC group （intragastric administration of corresponding decoction at 5.20 g/kg， calculated by the dosage of crude drug； simultaneous injection of small interfering RNA for negative control via the tail vein）， with 12 rats in each group. Another 12 healthy rats were selected as the control group and were given the same volume of normal saline intragastrically， once a day， for 14 consecutive days. Body weight was measured before administration and at the end of the last administration. The mechanical pain threshold and thermal pain threshold were measured， and the bone destruction， pathological changes and osteoclast formation of the tibia were observed. The positive expression of receptor activator of nuclear factor-κB （RANK） and receptor activator of nuclear factor-κB ligand （RANKL） in the tibial tissue， as well as the phosphorylation levels of RIPK1， RIPK3 and mixed lineage kinase domain-like protein （MLKL） were detected. RESULTS Compared with the control group， the tumor cells of tibia tissues in rats of the model group showed significant proliferation and diffuse infiltration into the bone marrow cavity. Extensive areas of tumor necrosis of cells， severe bone destruction， thinning of the bone cortex， and damage to the bone trabeculae were observed. The body weight （before administration and at the end of the last administration）， mechanical pain threshold， thermal pain threshold， and the phosphorylation levels of RIPK1， RIPK3 and MLKL were decreased significantly； the tumor volume， the proportion of bone destruction area， the number of osteoclasts， and the positive expressions of RANK and RANKL were increased/up-regulated significantly （P＜0.05）. Compared with the model group， the above pathological changes in the tibial tissues of rats in modified Yanghe decoction low-， medium- and high-dose groups were all alleviated， and all quantitative indicators showed dose-dependent improvement （P＜0.05）. After silencing RIPK1， the aforementioned beneficial effects of high-dose modified Yanghe decoction were significantly weakened （P＜0.05）.CONCLUSIONSModified Yanghe decoction can alleviate bone destruction in rats with breast cancer bone metastasis. The above effect is related to the activation of the RIPK1/RIPK3 pathway.

To investigate the association between the systemic inflammatory response index (SIRI) and lung cancer prevalence based on the National Health and Nutrition Examination Survey (NHANES) database.

Objective: To investigate the association between uric acid level and elevated blood pressure among children and adolescents in Guangzhou, so as to provide a scientific basis for prevention and control of hypertension in the pediatric population. Methods: From March to December 2019, using stratified cluster random sampling, 3 626 children and adolescents aged 6-17 years without elevated blood pressure at baseline were recruited from 6 primary and secondary schools in Guangzhou. Serum uric acid levels were measured at baseline, and divided into four groups ( Q1-Q 4) based on age and sex specific quartiles for analyses. Two waves of follow up were carried out from October 2020 to May 2021 and from October 2021 to May 2022, respectively. Multilevel robust Poisson regression was used to evaluate the association between uric acid level and elevated blood pressure among children and adolescents. The additive interaction between high uric acid level and sugar sweetened beverage (SSB) intake on elevated blood pressure was assessed by stratification analysis and calculation of the relative excess risk due to interaction (RERI). Results: A total of 1 131 new cases of elevated blood pressure were identified during the two follow ups, with an incidence density of 130.5 cases 1 000 person years. Multilevel robust Poisson regression analysis showed that after adjusting for confounders such as gender, age and annual family income, compared with those in the uric acid Q 1 level, the risk of elevated blood pressure in individuals in the Q 4 level increased by 25% ( RR=1.25, 95%CI =1.08-1.44), and the risk of elevated systolic blood pressure increased by 20% ( RR=1.20, 95%CI =1.05-1.36) (both P <0.05); no statistical association was observed between uric acid and elevated diastolic blood pressure (all P >0.05). In the stratified analysis, the statistical associations of uric acid Q 4 level with elevated blood pressure ( RR=1.34, 95%CI =1.13-1.58) and elevated systolic blood pressure ( RR=1.33, 95%CI =1.14-1.55) were only observed in the group with SSB intake ≥ 250 mL/week (both P <0.05). The RERI values for the effect of uric acid Q 4 and Q 3 levels with SSB intake ≥ 250 mL/week on elevated systolic and diastolic blood pressure were 0.29 and 0.44 (both P <0.05). Conclusions High uric acid level is a risk factor for elevated blood pressure among children and adolescents, with a predominant effect on systolic blood pressure. High uric acid level and SSB intake synergistically promote the increase of blood pressure of children and adolescents.

Objective To detect the isocenter of a medical linear accelerator using an optical surface monitoring system (OSMS) combined with a self-made 3D-printed phantom, and compare with the conventional front pointer measurement method. Methods A phantom that could be fixed to the front pointer of the accelerator was fabricated using 3D printing technology. The front pointer method and OSMS were used to detect the rotation isocenter deviations of the accelerator. During the experiments, the collimator, gantry, and couch linear displacement readings were recorded at different angles. We also recorded the measurement time of different surveyors. Results Compared to the front pointer measurement method, the OSMS method showed lower standard deviations. The reductions in standard deviations showed statistical significance in the Lat direction for the collimator rotation isocenter as well as in the Lat and Vrt directions for the gantry rotation isocenter. The mean deviation of Mag values for the collimator rotation isocenter using the OSMS method was 0.50 mm, which was larger than the 0.42 mm using the front pointer method. However, the standard deviation was 0.06 using the OSMS method, which was smaller than the 0.18 using the front pointer method. The mean deviation and standard deviation of Sag values for the gantry rotation isocenter using the OSMS method were 1.03 mm and 0.12, respectively, which were both larger than 0.47 mm and 0.06 using the front pointer method. For the couch rotation isocenter, the mean deviation and standard deviation using the OSMS method were 0.32 mm and 0.04, respectively, which were both smaller than the 0.55 mm and 0.20 using the front pointer method. All surveyors spent less time in isocenter measurements using the OSMS method compared to the front pointer method. Conclusion Compared with the front pointer method, the OSMS method significantly reduces the standard deviation among surveyors, effectively reduces the influence of the angle deviation of the accelerator on the measurement results, reduces detection time, improves detection efficiency, and provides a powerful practical basis for the application of OSMS in detecting the mechanical accuracy of the linear accelerator.

Objective To detect the isocenter of a medical linear accelerator using an optical surface monitoring system (OSMS) combined with a self-made 3D-printed phantom, and compare with the conventional front pointer measurement method. Methods A phantom that could be fixed to the front pointer of the accelerator was fabricated using 3D printing technology. The front pointer method and OSMS were used to detect the rotation isocenter deviations of the accelerator. During the experiments, the collimator, gantry, and couch linear displacement readings were recorded at different angles. We also recorded the measurement time of different surveyors. Results Compared to the front pointer measurement method, the OSMS method showed lower standard deviations. The reductions in standard deviations showed statistical significance in the Lat direction for the collimator rotation isocenter as well as in the Lat and Vrt directions for the gantry rotation isocenter. The mean deviation of Mag values for the collimator rotation isocenter using the OSMS method was 0.50 mm, which was larger than the 0.42 mm using the front pointer method. However, the standard deviation was 0.06 using the OSMS method, which was smaller than the 0.18 using the front pointer method. The mean deviation and standard deviation of Sag values for the gantry rotation isocenter using the OSMS method were 1.03 mm and 0.12, respectively, which were both larger than 0.47 mm and 0.06 using the front pointer method. For the couch rotation isocenter, the mean deviation and standard deviation using the OSMS method were 0.32 mm and 0.04, respectively, which were both smaller than the 0.55 mm and 0.20 using the front pointer method. All surveyors spent less time in isocenter measurements using the OSMS method compared to the front pointer method. Conclusion Compared with the front pointer method, the OSMS method significantly reduces the standard deviation among surveyors, effectively reduces the influence of the angle deviation of the accelerator on the measurement results, reduces detection time, improves detection efficiency, and provides a powerful practical basis for the application of OSMS in detecting the mechanical accuracy of the linear accelerator.

Objective To detect the isocenter of a medical linear accelerator using an optical surface monitoring system (OSMS) combined with a self-made 3D-printed phantom, and compare with the conventional front pointer measurement method. Methods A phantom that could be fixed to the front pointer of the accelerator was fabricated using 3D printing technology. The front pointer method and OSMS were used to detect the rotation isocenter deviations of the accelerator. During the experiments, the collimator, gantry, and couch linear displacement readings were recorded at different angles. We also recorded the measurement time of different surveyors. Results Compared to the front pointer measurement method, the OSMS method showed lower standard deviations. The reductions in standard deviations showed statistical significance in the Lat direction for the collimator rotation isocenter as well as in the Lat and Vrt directions for the gantry rotation isocenter. The mean deviation of Mag values for the collimator rotation isocenter using the OSMS method was 0.50 mm, which was larger than the 0.42 mm using the front pointer method. However, the standard deviation was 0.06 using the OSMS method, which was smaller than the 0.18 using the front pointer method. The mean deviation and standard deviation of Sag values for the gantry rotation isocenter using the OSMS method were 1.03 mm and 0.12, respectively, which were both larger than 0.47 mm and 0.06 using the front pointer method. For the couch rotation isocenter, the mean deviation and standard deviation using the OSMS method were 0.32 mm and 0.04, respectively, which were both smaller than the 0.55 mm and 0.20 using the front pointer method. All surveyors spent less time in isocenter measurements using the OSMS method compared to the front pointer method. Conclusion Compared with the front pointer method, the OSMS method significantly reduces the standard deviation among surveyors, effectively reduces the influence of the angle deviation of the accelerator on the measurement results, reduces detection time, improves detection efficiency, and provides a powerful practical basis for the application of OSMS in detecting the mechanical accuracy of the linear accelerator.

Objective: To investigate the current status of hyperopic reserve among preschool children and to determine the associations with genetic and behavioral factors, so as to provide evidence for early intervention strategies and the development of working protocols for myopia prevention with a forward shift of the prevention threshold. Methods: A total of 924 preschool children (3-6 years of age) from 6 kindergartens in Jiading District of Shanghai were enrolled by stratified random sampling from March to June 2024. Cycloplegic refraction using 1% atropine eye drops was performed to obtain accurate spherical equivalent (SE) values. Questionnaires were used to collect the genetic history and daily behavioral habits of the children. Refractive status was classified into three categories based on the SE:sufficient hyperopic reserve, relatively insufficient hyperopic reserve, and pre myopia. Results: The overall detection rate of insufficient hyperopic reserve among preschool children was 82.25%, consisting of 72.29% for relatively insufficient hyperopic reserve and 9.96% for pre myopia. Multivariate Logistic regression analysis showed that parental bilateral myopia was independently and positively associated with relatively insufficient hyperopic reserve ( OR =2.13) and pre myopia ( OR =4.35) compared to children with sufficient hyperopic reserve; electronic screen exposure time ≥2 h/d on school days was an independent and positive risk factor for pre myopia ( OR =2.83); all of the above associations were statistically significant (all P <0.05). No statistically significant association was noted between outdoor activity and hyperopic reserve (all P >0.05). Conclusions The insufficient hyperopic reserve detection rate is relatively high among preschool children in Jiading District, Shanghai. Early management of electronic device use with regular screening and monitoring for preschool children with a family history of myopia should be strengthened to shift the prevention threshold earlier and prevent childhood myopia.

Objective To investigate the nutritional quality characteristics of vitamin D3-fortified yogurt and explore its improving effect on vitamin D metabolism in the body under simulated weightlessness,thereby providing a theoretical basis for the development of functional foods.Methods Using reconstituted milk as the matrix and Vitamin D3(VD3)microcapsule powder as the fortifier,VD3-fortified yogurt was prepared.A systematic study was conducted to investigate the effects of different gradients(1.25 μg/100 mL,2.50 μg/100 mL,3.75 μg/100 mL,5.00 μg/100 mL,6.25 μg/100 mL)of VD3 microcapsule addition on its quality characteristics(titratable acidity,solid content,water-holding capacity,syneresis).In vivo assessments were conducted using a Sprague-Dawley(SD)rat tail-suspension model to simulate weightlessness.Levels in serum 25(OH)D3,1,25-(OH)2D3,calcium(Ca),and phosphorus(P)were detected using the enzyme-linked immunosorbent assay(ELISA)to evaluate its metabolic capacity.Results During fermentation(3 h),titratable acidity of VD?-fortified yogurt initially increased,then decreased,and eventually stabilized with rising microcapsule dosage,while total solid content remained consistent.WHC exhibited an initial increase followed by a decline,whereas syneresis showed an inverse trend.At an optimal dosage of 3.75 μg/100 mL,the yogurt displayed a dense and uniform network structure,characterized by non-Newtonian fluid behavior with shear-thinning properties.This formulation demonstrated robust structural stability under high-frequency mechanical stress,alongside desirable textural,flavor,and sensory attributes.Animal experiments revealed that the serum concentrations of 25(OH)D3,1,25-(OH)2D3,calcium,and phosphorus in the vitamin D?-fortified yogurt intervention group were significantly higher than those in the tail-suspended control group(P<0.05).Conclusion VD? microencapsulation technology effectively preserves and enhances the nutritional quality characteristics of yogurt and mitigates vitamin D metabolic dysregulation under simulated weightlessness.

Objective To explore the effectiveness and safety of hypofractionated radiotherapy(HFRT)combined with transcatheter arterial chemoembolization(TACE)for metachronous hepatic oligometastasis from nasopharyngeal carcinoma(NPC).Methods The clinical data of patients with metachronous hepatic oligometastasis from NPC,who received HFRT combined with TACE treatment at the Sichuan Provincial Cancer Hospital of China from January 2012 to October 2022,were retrospectively analyzed.The 3-year and 5-year overall survival(OS),progression-free survival(PFS),local recurrence-free survival(LRFS),no extrahepatic distant metastasis survival(EMFS),and treatment-related adverse reactions were analyzed.Results A total of 55 patients were enrolled in this study,including 36 males and 19 females,the median age at the time of occurring metachronous hepatic oligometastasis was 44(27-75)years.The 3-year and 5-year OS,PFS,LRFS,EMFS were 67.8％and 40.0％,55.8％and 30.0％,72.7％and 56.5％,63.6％and 56.5％,respectively.The subgroup analysis indicated that the treatment course of TACE ≥3 cycles could significantly improve the PFS of patients with oligometastasis.HFRT combined with TACE treatment was well tolerated by all patients,and the incidence of Grade Ⅲ-Ⅳadverse reactions was quite low.Conclusion For the treatment of metachronous hepatic oligometastasis from NPC,HFRT combined with TACE is clinically effective,besides,the patients can well tolerate the therapeutic scheme.

Objective:To investigate the clinical characteristics of sepsis-induced myocardial injury and microbial distribution.Methods:It was a retrospective observational study conducted from Jan 2023 to Dec 2023 in the Department of Emergency Intensive Care Medicine, Changshu Hospital Affiliated to Soochow University. Patients meeting the sepsis 3.0 criteria were included, excluding those with underlying cardiovascular diseases or incomplete data. Patients were categorized into myocardial injury (SIMI) and non-myocardial injury (Non-SIMI) groups based on troponin levels. General patient information, laboratory results, microbial findings, and prognostic indicators were collected. Differences in clinical parameters between the two groups were compared. Factors showing statistical differences in univariate analysis were further analyzed using multivariable logistic regression to identify risk factors for SIMI. Conduct propensity score matching among Pulmonary infection patients who underwent bronchoalveolar lavage high-throughput sequencing to compare microbial distribution between groups. Bracken was used to estimate species-level abundance from Kraken2 results, and α and β diversity analyses were conducted on the metagenomic samples.Results:A total of 179 patients were included in the study, with 98 (54.4%) in the Non-SIMI group and 81 (45.5%) in the SIMI group. There were 69 deaths overall (38.5%), with 23 (23.7%) in the Non-SIMI group and 46 (56.8%) in the SIMI group (χ 2=20.347, P<0.01). The 28-day survival curve indicated survival rates in the SIMI group were significantly lower compared to the Non-SIMI group (Log Rank χ 2=21.270, P<0.01). Univariate analysis revealed that fungal infection rate ( P=0.007), C-reactive protein ( P=0.021), procalcitonin, blood urea nitrogen, creatinine, alanine transaminase, and lactate levels were higher in the SIMI group compared to the Non-SIMI group (all P<0.01), prothrombin time was prolonger ( P<0.01) and APACHEⅡ scores were higher ( P<0.01), while serum albumin, base excess, and platelet levels were lower (all P<0.01). Multivariable logistic regression analysis indicated that fungal infection ( OR=3.441, P=0.015) was a risk factor for SIMI, whereas base excess and platelets were protective factors ( OR=0.845, 0.988, both P<0.01). Comparison of bronchoalveolar lavage high-throughput sequencing results in the pulmonary infection subgroup showed the relative abundance of Haemophilus paraininfluenzae in Non-SIMI group was higher than SIMI group among the top 20 species ( P=0.013). There were no statistically significant differences in microbial αand β-diversity between the two groups. Conclusions:The incidence of SIMI is relatively highamong sepsis patients and it affects their prognosis. Risk factors for SIMI include fungal infection, decreased platelet count, and reduced base excess levels. Among patients with pulmonary infections, there is a lower risk of SIMI associated with Haemophilus influenzae infection.