Objective To establish a highly sensitive and specific method for detecting human DNA based on real time quantitative PCR(qPCR)technique for the rapid detection of potential DNA con-tamination sources in DNA laboratories.Methods Primers and probes were designed with Primer Ex-pressTM software using the reference sequence of human 18S rRNA gene as a template,and the opti-mal prime-probe combination was screened by matrix method.The PCR products of the target se-quence of human 18S rRNA gene were used to construct the plasmid,and a plasmid standard was used to draw the standard curve of the qPCR system.According to the Minimum Information for Pub-lication of Quantitative Real-time PCR Experiments(MIQE)guidelines,the specificity,sensitivity,re-peatability and application effect of the qPCR system were evaluated.Results The sensitivity of the qPCR system established in this study was 5.3×10-5 ng/μL,which showed good specificity for human DNA samples.The correlation coefficient of the qPCR system was-0.999,and amplification efficiency was 100％.Both the intra-batch and inter-batch variation coefficients were less than 2％.Conclusion The established human DNA detection method based on qPCR technique has good specificity,high sen-sitivity,and robust stability.It can be used for rapid detection of DNA contamination and daily moni-toring of the accumulated human DNA in the laboratory environment.

BACKGROUND: Non-invasive computed tomography angiography (CTA)-based fractional flow reserve (CT-FFR) could become a gatekeeper to invasive coronary angiography. Deep learning (DL)-based CT-FFR has shown promise when compared to invasive FFR. To evaluate the performance of a DL-based CT-FFR technique, DeepVessel FFR (DVFFR). METHODS: This retrospective study was designed for iScheMia Assessment based on a Retrospective, single-center Trial of CT-FFR (SMART). Patients suspected of stable coronary artery disease (CAD) and undergoing both CTA and invasive FFR examinations were consecutively selected from the Beijing Anzhen Hospital between January 1, 2016 to December 30, 2018. FFR obtained during invasive coronary angiography was used as the reference standard. DVFFR was calculated blindly using a DL-based CT-FFR approach that utilized the complete tree structure of the coronary arteries. RESULTS: Three hundred and thirty nine patients (60.5 ±10.0 years and 209 men) and 414 vessels with direct invasive FFR were included in the analysis. At per-vessel level, sensitivity, specificity, accuracy, positive predictive value (PPV) and negative predictive value (NPV) of DVFFR were 94.7%, 88.6%, 90.8%, 82.7%, and 96.7%, respectively. The area under the receiver operating characteristics curve (AUC) was 0.95 for DVFFR and 0.56 for CTA-based assessment with a significant difference (P < 0.0001). At patient level, sensitivity, specificity, accuracy, PPV and NPV of DVFFR were 93.8%, 88.0%, 90.3%, 83.0%, and 95.8%, respectively. The computation for DVFFR was fast with the average time of 22.5 ± 1.9 s. CONCLUSIONS The results demonstrate that DVFFR was able to evaluate lesion hemodynamic significance accurately and effectively with improved diagnostic performance over CTA alone. Coronary artery disease (CAD) is a critical disease in which coronary artery luminal narrowing may result in myocardial ischemia. Early and effective assessment of myocardial ischemia is essential for optimal treatment planning so as to improve the quality of life and reduce medical costs.

The continuous emergence of SARS-CoV-2 variants as well as other potential future coronavirus has challenged the effectiveness of current COVID-19 vaccines. Therefore, there remains a need for alternative antivirals that target processes less susceptible to mutations, such as the formation of six-helix bundle (6-HB) during the viral fusion step of host cell entry. In this study, a novel high-throughput screening (HTS) assay employing a yeast-two-hybrid (Y2H) system was established to identify inhibitors of HR1/HR2 interaction. The compound IMB-9C, which achieved single-digit micromolar inhibition of SARS-CoV-2 and its Omicron variants with low cytotoxicity, was selected. IMB-9C effectively blocks the HR1/HR2 interaction in vitro and inhibits SARS-CoV-2-S-mediated cell-cell fusion. It binds to both HR1 and HR2 through non-covalent interaction and influences the secondary structure of HR1/HR2 complex. In addition, virtual docking and site-mutagenesis results suggest that amino acid residues A930, I931, K933, T941, and L945 are critical for IMB-9C binding to HR1. Collectively, in this study, we have developed a novel screening method for HR1/HR2 interaction inhibitors and identified IMB-9C as a potential antiviral small molecule against COVID-19 and its variants.

The phase changes and quantity-quality transfer of 17 batches of Ostreae Concha(Ostrea rivularis) during the raw material-calcined decoction pieces-standard decoction process were analyzed. The content of calcium carbonate(CaCO_3), the main component, was determined by chemical titration, and the extract yield and transfer rate were calculated. The CaCO_3 content in the raw material, calcined decoction pieces, and standard decoction was 94.39%-98.80%, 95.03%-99.22%, and 84.58%-90.47%, respectively. The process of raw material to calcined decoction pieces showed the yield range of 96.85% to 98.55% and the CaCO_3 transfer rate range of 96.92% to 99.27%. The process of calcined decoction pieces to standard decoction showed the extract yield range of 2.86% to 5.48% and the CaCO_3 transfer rate range of 2.59% to 5.13%. The results of X-ray fluorescence(XRF) assay showed that the raw material, calcined decoction pieces, and standard decoction mainly contained Ca, Na, Mg, Si, Br, Cl, Al, Fe, Cr, Mn, and K. The chemometric results showed an increase in the relative content of Cr, Fe, and Si from raw material to calcined decoction pieces and an increase in the relative content of Mg, Al, Br, K, Cl, and Na from calcined decoction pieces to standard decoction. X-ray diffraction(XRD) was employed to establish XRD characteristic patterns of the raw material, calcined decoction pieces, and standard decoction. The XRD results showed that the main phase of all three was calcite, and no transformation of crystalline form or generation of new phase was observed. Fourier transform infrared spectroscopy(FTIR) was employed to establish the FTIR characteristic spectra of the raw material, calcined decoction pieces, and standard decoction. The FTIR results showed that the raw material had internal vibrations of O-H, C-H, C=O, C-O, and CO■ groups. Due to the loss of organic matter components after calcination, no information about the vibrations of C-H, C=O, and C-O groups was observed in the spectra of calcined decoction pieces and standard decoction. In summary, this study elucidated the quantity-quality transfer and phase changes in the raw material-calcined decoction pieces-standard decoction process by determining the CaCO_3 content, calculating the extract yield and transfer rate, and comparing the element changes, FTIR characteristic spectra, and XRD characteristic pattern. The results were reasonable and reliable, laying a foundation for the subsequent process research and quality control of the formula granules of calcined Ostreae Concha(O. rivularis Gould), and providing ideas and methods for the quality control of the whole process of raw material-decoction pieces-standard decoction-formula granules of Ostreae Concha and other testacean traditional Chinese medicine.
Drugs, Chinese Herbal/isolation & purification* ; Calcium Carbonate/analysis* ; Quality Control

Guided by the concept of quality by design(QbD), this study optimizes the calcination and quenching process of calcined Magnetitum and establishes the XRD characteristic spectra of calcined Magnetitum, providing a scientific basis for the formulation of quality standards. Based on the processing methods and quality requirements of Magnetitum in the Chinese Pharmacopoeia, the critical process parameters(CPPs) identified were calcination temperature, calcination time, particle size, laying thickness, and the number of vinegar quenching cycles. The critical quality attributes(CQAs) included Fe mass fraction, Fe~(2+) dissolution, and surface color. The weight coefficients were determined by combining Analytic Hierarchy Process(AHP) and the criteria importance though intercrieria correlation(CRITIC) method, and the calcination process was optimized using orthogonal experimentation. Surface color was selected as a CQA, and based on the principle of color value, the surface color of calcined Magnetitum was objectively quantified. The vinegar quenching process was then optimized to determine the best processing conditions. X-ray diffraction(XRD) was used to establish the characteristic spectra of calcined Magnetitum, and methods such as similarity evaluation, cluster analysis, and orthogonal partial least squares-discriminant analysis(OPLS-DA) were used to evaluate the quality of the spectra. The optimized calcined Magnetitum preparation process was found to be calcination at 750 ℃ for 1 h, with a laying thickness of 4 cm, a particle size of 0.4-0.8 cm, and one vinegar quenching cycle(Magnetitum-vinegar ratio 10∶3), which was stable and feasible. The XRD characteristic spectra analysis method, featuring 9 common peaks as fingerprint information, was established. The average correlation coefficient ranged from 0.839 5-0.988 1, and the average angle cosine ranged from 0.914 4 to 0.995 6, indicating good similarity. Cluster analysis results showed that Magnetitum and calcined Magnetitum could be grouped together, with similar compositions. OPLS-DA discriminant analysis identified three key characteristic peaks, with Fe_2O_3 being the distinguishing component between the two. The final optimized processing method is stable and feasible, and the XRD characteristic spectra of calcined Magnetitum was initially established, providing a reference for subsequent quality control and the formulation of quality standards for calcined Magnetitum.
X-Ray Diffraction/methods* ; Drugs, Chinese Herbal/chemistry* ; Quality Control ; Particle Size

Eight compounds were isolated and purified from the ethyl acetate part of 70% acetone extract of Rehmannia glutinosa by various chromatographic techniques such as silica gel, MCI gel CHP-20, ODS, Toyopearl HW-40C, combined with TLC and semi-preparative HPLC. Their structures were elucidated by modern spectroscopy techniques (NMR, MS, UV, IR), and identified as neomartynoside A (1), osmanthuside B₆ (2), martynoside (3), isomartynoside (4), (E)-p-hydroxycinnamic acid (5), caffeic acid (6), ferulic acid (7), and methyl caffeate (8). Compound 1 is a new phenylethanol glycoside, which was identified as neomartynoside A. Compound 2 was isolated from Rehmannia glutinosa for the first time. In addition, compounds 2, 6 and 7 significantly increased relative glucose consumption, showing potential hypoglycemic activity.

Carpal tunnel syndrome (CTS) is a condition caused by compression of the median nerve in carpal canal. In recent years, due to popularity of electronic devices such as computers, the incidence of CTS has shown a rapid rising trend. Its treatment methods include surgical treatment and conservative treatment. For mild to and moderate CTS, conservative treatment is preferred. Acupotomy, as an innovative and unique treatment method, could relieve pressure in carpal canal by releasing transverse ligament of wrist and promote local blood circulation to treat CTS, and has characteristics of less trauma, short course of treatment and low cost, which is more acceptable to patients. In addition, the combination of needle-knife and other therapies also has a good effect. However, traditional needle-knife therapy has certain limitations in operation, and its safety problems can be effectively solved with the help of ultrasound technology. Therefore, ultrasus-guided needle-knife therapy for CTS has become a current research hotspot, but its long-term therapeutic effect still needs to be further verified.
Humans ; Carpal Tunnel Syndrome/therapy* ; Acupuncture Therapy/methods*

Subtotal colectomy is a complex and difficult surgical method in colorectal surgery. There are currently open surgery, conventional laparoscopic surgery and single-port laparoscopic surgery, but these surgical methods have certain operational difficulties and disadvantages. With the continuous advancement of minimally invasive platforms and surgical techniques, robotic surgical systems are becoming more and more widely used in colorectal surgery. Robotic single-incision sub-total colectomy combines the characteristics of laparoscopic and single-port surgical operations, such as significantly reducing abdominal trauma, reducing postoperative pain, and speeding up recovery time, it also makes full use of the unique advantages of the robotic surgical system, such as a clearer three-dimensional field of view and more flexible and stable instrument operation, and has a good clinical application prospect. Based on domestic and foreign research, the authors summarize the key points of robotic single-incision subtotal colectomy combined with their own experience, expound its advantages and disadvantages, aiming to provide reference for promotion and popularization of standardization of this technique.

Objective To evaluate the efficacy and safety of brexpiprazole in treating acute schizophrenia.Methods Patients with schizophrenia were randomly divided into treatment group and control group.The treatment group was given brexpiprozole 2-4 mg·d-1 orally and the control group was given aripiprazole 10-20 mg·d-1orally,both were treated for 6 weeks.Clinical efficacy of the two groups,the response rate at endpoint,the changes from baseline to endpoint of Positive and Negative Syndrome Scale(PANSS),Clinical Global Impression-Improvement(CGI-S),Personal and Social Performance scale(PSP),PANSS Positive syndrome subscale,PANSS negative syndrome subscale were compared.The incidence of treatment-related adverse events in two groups were compared.Results There were 184 patients in treatment group and 186 patients in control group.After treatment,the response rates of treatment group and control group were 79.50％(140 cases/184 cases)and 82.40％(150 cases/186 cases),the scores of CGI-I of treatment group and control group were(2.00±1.20)and(1.90±1.01),with no significant difference(all P＞0.05).From baseline to Week 6,the mean change of PANSS total score wese(-30.70±16.96)points in treatment group and(-32.20±17.00)points in control group,with no significant difference(P＞0.05).The changes of CGI-S scores in treatment group and control group were(-2.00±1.27)and(-1.90±1.22)points,PSP scores were(18.80±14.77)and(19.20±14.55)points,PANSS positive syndrome scores were(-10.30±5.93)and(-10.80±5.81)points,PANSS negative syndrome scores were(-6.80±5.98)and(-7.30±5.15)points,with no significant difference(P＞0.05).There was no significant difference in the incidence of treatment-related adverse events between the two group(69.00％vs.64.50％,P＞0.05).Conclusion The non-inferiority of Brexpiprazole to aripiprazole was established,with comparable efficacy and acceptability.

Macroporous adsorption resin, MCI, Toyopearl HW-40C and silica gel column chromatography combined with the semi-preparative HPLC were used to isolate and purify the water extract of Cornus officinalis. And the structures of compounds were identified by HRESIMS, NMR, IR, UV and ECD. A total of twelve compounds were isolated from the fruits of Cornus officinalis. They were identified as neolignan B (1), 2,3-dihydro-7-methoxy-2-(4′-hydroxy-3′-methoxyphenyl)-3a-O-β-D-xylopyranosyloxymethyl-5-benzofuranpropanol (2), cornucadinoside A (3), 3,4-dihydroxyacetophenone (4), n-butyl gallate (5), 3-hydroxybenzoic acid (6), n-butyl quininate (7), 5-hydroxymaltol (8), 2-furolic acid (9), 5-hydroxymethylfurfural (10), 5-(methoxycarbonyl)-2-pyrrolidone (11), and dimethyl malate (12). Compound 1 is a new biphenyl lignan, named as neolignan B. Compounds 2, 4, 5, 7-9 and 11 were isolated from Cornus officinalis for the first time.