In this paper， by referring to ancient and modern literature， the textual research of Inulae Flos has been conducted to clarify the name， origin， production area， quality evaluation， harvesting， processing and others， so as to provide reference and basis for the development and utilization of famous classical formulas containing this herb. After textual research， it could be verified that the medicinal use of Inulae Flos was first recorded in Shennong Bencaojing of the Han dynasty. In successive dynasties， Xuanfuhua has been taken as the official name， and it also has other alternative names such as Jinfeicao， Daogeng and Jinqianhua. The period before the Song and Yuan dynasties， the main origin of Inulae Flos was the Asteraceae plant Inula japonica， and from the Ming and Qing dynasties to the present， I. japonica and I. britannica are the primary source. In addition to the dominant basal species， there are also regional species such as I. linariifolia， I. helianthus-aquatili， and I. hupehensis. The earliest recorded production areas in ancient times were Henan， Hubei and other places， and the literature records that it has been distributed throughout the country since modern times. The medicinal part is its flower， the harvesting and processing method recorded in the past dynasties is mainly harvested in the fifth and ninth lunar months， and dried in the sun， and the modern harvesting is mostly harvested in summer and autumn when the flowers bloom， in order to remove impurities， dry in the shade or dry in the sun. In addition， the roots， whole herbs and aerial parts are used as medicinal materials. In ancient times， there were no records about the quality of Inulae Flos， and in modern times， it is generally believed that the quality of complete flower structure， small receptacles， large blooms， yellow petals， long filaments， many fluffs， no fragments， and no branches is better. Ancient processing methods primarily involved cleaning， steaming， and sun-drying， supplemented by techniques such as boiling， roasting， burning， simmering， stir-frying， and honey-processing. Modern processing focuses mainly on cleaning the stems and leaves before use. Regarding the medicinal properties， ancient texts describe it as salty and sweet in taste， slightly warm in nature， and mildly toxic. Modern studies characterize it as bitter， pungent， and salty in taste， with a slightly warm nature. Its therapeutic effects remain consistent across eras， including descending Qi， resolving phlegm， promoting diuresis， and stopping vomiting. Based on the research results， it is recommended that when developing famous classical formulas containing Inulae Flos， either I. japonica or I. britannica should be used as the medicinal source. Processing methods should follow formula requirements， where no processing instructions are specified， the raw products may be used after cleaning.

In this paper， by referring to ancient and modern literature， the textual research of Inulae Flos has been conducted to clarify the name， origin， production area， quality evaluation， harvesting， processing and others， so as to provide reference and basis for the development and utilization of famous classical formulas containing this herb. After textual research， it could be verified that the medicinal use of Inulae Flos was first recorded in Shennong Bencaojing of the Han dynasty. In successive dynasties， Xuanfuhua has been taken as the official name， and it also has other alternative names such as Jinfeicao， Daogeng and Jinqianhua. The period before the Song and Yuan dynasties， the main origin of Inulae Flos was the Asteraceae plant Inula japonica， and from the Ming and Qing dynasties to the present， I. japonica and I. britannica are the primary source. In addition to the dominant basal species， there are also regional species such as I. linariifolia， I. helianthus-aquatili， and I. hupehensis. The earliest recorded production areas in ancient times were Henan， Hubei and other places， and the literature records that it has been distributed throughout the country since modern times. The medicinal part is its flower， the harvesting and processing method recorded in the past dynasties is mainly harvested in the fifth and ninth lunar months， and dried in the sun， and the modern harvesting is mostly harvested in summer and autumn when the flowers bloom， in order to remove impurities， dry in the shade or dry in the sun. In addition， the roots， whole herbs and aerial parts are used as medicinal materials. In ancient times， there were no records about the quality of Inulae Flos， and in modern times， it is generally believed that the quality of complete flower structure， small receptacles， large blooms， yellow petals， long filaments， many fluffs， no fragments， and no branches is better. Ancient processing methods primarily involved cleaning， steaming， and sun-drying， supplemented by techniques such as boiling， roasting， burning， simmering， stir-frying， and honey-processing. Modern processing focuses mainly on cleaning the stems and leaves before use. Regarding the medicinal properties， ancient texts describe it as salty and sweet in taste， slightly warm in nature， and mildly toxic. Modern studies characterize it as bitter， pungent， and salty in taste， with a slightly warm nature. Its therapeutic effects remain consistent across eras， including descending Qi， resolving phlegm， promoting diuresis， and stopping vomiting. Based on the research results， it is recommended that when developing famous classical formulas containing Inulae Flos， either I. japonica or I. britannica should be used as the medicinal source. Processing methods should follow formula requirements， where no processing instructions are specified， the raw products may be used after cleaning.

Background: Surgeons face challenges in selecting cost-effective and biologically active agents for rotator cuff healing, given the numerous commercial products available, such as polydeoxyribonucleotide (PDRN) and atelocollagen (ATC). However, the precise efficacy of PDRN and ATC in rotator cuff healing remains debatable, and there is currently a lack of studies directly comparing the effects of the 2 agents on repaired cuff tendons. Therefore, the purpose of this study was to compare the efficacy of PDRN and ATC on bone-to-tendon interface (BTI) healing using a chronic rotator cuff tear (RCT) model in rabbits. Methods: Forty-eight rabbits were randomly divided into 3 groups. To create chronic RCT models, transected tendons were left untreated for 6 weeks, and then were repaired in a transosseous manner with PDRN and ATC injection into the repair site according to group allocation (group A: saline, group B: PDRN, group C: ATC; n = 16 per group). Genetic and immunofluorescence analyses were performed at 4 weeks after surgery. Furthermore, genetic, histologic, and biomechanical analyses were performed at 12 weeks after surgery. Results: At 4 weeks after surgery, ATC-injected shoulders showed the highest mRNA expression levels of collagen type I alpha 1 and aggrecan compared to the other 2 groups (p < 0.001 and p = 0.002, respectively). Meanwhile, there was more preliminary fibrocartilaginous matrix formation in the ATC-injected group. At 12 weeks after surgery, ATC-injected shoulders demonstrated better collagen fiber continuity and orientation, denser collagen fibers, a more mature bone-to-tendon junction, and greater fibrocartilage layer formation compared to the other 2 groups (all p < 0.001). Furthermore, ATC-injected shoulders also demonstrated a significantly higher load-to-failure value (40.4 ± 4.5 N/kg) than the remaining groups (group A, 26.7 ± 3.0 N/kg; group B, 32.8 ± 4.2 N/kg; p < 0.001). Conclusions ATC demonstrated superior efficacy in promoting BTI healing following surgical repair in a chronic RCT model of rabbits.

Objective To explore the clinical efficacy of robot-assisted coronary artery bypass grafting through a small incision in the left intercostal space in the treatment of multivessel coronary disease. Methods A retrospective analysis was conducted on the clinical data of patients who underwent coronary artery bypass grafting through a small incision in the left intercostal space at Central China Fuwai Hospital of Zhengzhou University from January 1, 2023 to October 15, 2024. Patients were divided into a robotic group and a minimally invasive group based on whether the surgery was assisted by the Da Vinci robot. Results A total of 81 patients were included, with 57 in the minimally invasive group, including 41 males and 16 females, with a median age of 65.0 (57.5, 69.5) years; and 24 in the robotic group, including 17 males and 7 females, with a median age of 61.0 (56.0, 69.0) years. There was no statistically significant difference in baseline data between the two groups (P>0.05). The robotic group had less intraoperative bleeding [300 (200, 438) mL vs. 500 (375, 600) mL, P=0.006], shorter postoperative mechanical ventilation time [15.0 (13.3, 23.5) h vs. 22.0 (15.5, 39.5) h, P=0.037], and lower incidence of postoperative pain [8 (33.3%) vs. 33 (57.9%), P=0.043]. The hospitalization cost in the robotic group was higher than that in the minimally invasive group [130491 (123298, 135691) yuan vs. 123892 (115543, 133449) yuan, P=0.023]. There was no statistical difference in postoperative laboratory indicators between the two groups (P>0.05). There was also no statistical difference in the duration of surgery, postoperative 24 h drainage volume, ICU stay time, postoperative hospital stay or incidences of perioperative compications including pleural effusion, transfusion, new-onset atrial fibrillation, acute kidney injury, non-union of incision, major cardiovascular and cerebrovascular adverse events, and reoperation between the two groups (P>0.05). Conclusion Compared with the minimally invasive group, the robotic group shows satisfactory efficacy and can effectively reduce postoperative pain and intraoperative bleeding, and shorten postoperative mechanical ventilation time.

Objective To investigate the epidemiological characteristics of malaria and provide a basis for developing improved prevention and control measures. Methods Data were obtained from the Chinese Disease Prevention and Control Information System. Malaria surveillance data for Nanning City from January 1,2023, to December 31,2024, were exported from the Infectious Disease Reporting Information Management Subsystem. The characteristics of the two groups of malaria cases were compared. Results A total of 103 imported malaria cases were reported in Nanning City in 2024, representing a 38.32% decrease compared with the same period of the previous year. No statistically significant difference were observed between cases reported in 2023 and 2024 in terms of average age, gender ratio, proportion of parasite species, and monthly reporting distribution;however, statistically significant differences were found in the proportion of reporting areas and current residence areas(χ2= 13.572 and 10.355, respectively; P = 0.001 and 0.035, respectively). The proportion of cases reported in Shanglin County and the proportion of cases residing in Shanglin County were both lower than those during the same period of the previous year. Conclusions The high aggregation of imported malaria cases in Nanning City has decreased. Medical institutions in areas other than Shanglin County should strengthen their vigilance against malaria.

To investigate the effects of phosphorus fertilizer on the morphological traits, active ingredients and rhizosphere soil microbial community of Polygala tenuifolia. The phosphorus fertilizer was calculated in terms of P_2O_5. Five treatments were set up: 0(CK), 17(P1), 34(P2), 51(P3), and 68(P4) kg per Mu(1 Mu≈667 m~2). A randomized block design was adopted. Samples of P. tenuifolia and its rhizosphere soil were collected under different superphosphate fertilizer treatments. Illumina high-throughput sequencing was used to analyze the rhizosphere soil microbial community, 9 morphological traits were measured and the content of 11 active ingredients were determined. The results showed that the whole plant weight, shoot fresh weight, root weight, and root peel thickness were the highest under P1 treatment, increasing by 34.41%, 38.80%, 39.21%, and 3.17% respectively compared to CK. Under P2 treatment, the plant height, stem diameter, root thickness, and core thickness were significantly higher than CK. Phosphorus fertilizer had a significant impact on the content of tenuifolin, sibiricose A5, sibiricose A6, arillanin A, 3,6'-disinapoyl sucrose, and polygalaxanthone Ⅲ. Correlation analysis results showed that the relative abundance of Arthrobacter, Bacillus, norank＿f＿Vicinamibacteraceae, norank＿o＿Vicinamibacterales, MND1 and other bacteria, as well as the relative abundance of Neocosmospora, Paraphoma and other fungi were positively correlated with root diameter, wood core diameter, the whole plant weight, root weight, shoot fresh weight of P. tenuifolia. Bacillus, Neocosmospora, Subulicystidium were significantly positively correlated with oligosaccharides such as 3,6'-disinapoyl sucrose, sibiricose A5、sibiricose A6、glomeratose A、arillanin A and tenuifoliside C. Arthrobacter, Humicola, Aspergillus, Paraphoma were positively correlated with tenuifolin and norank＿f＿Vicinamibacteraceae, norank＿o＿Vicinamibacterales, Fusarium were positively correlated with polygalaxanthone Ⅲ. Evidently, appropriate phosphorus application is conducive to the growth and quality improvement of P. tenuifolia, and can increase the abundance of beneficial microorganisms in the soil.
Rhizosphere ; Phosphorus/pharmacology* ; Soil Microbiology ; Polygala/anatomy & histology* ; Fertilizers/analysis* ; Bacteria/metabolism* ; Soil/chemistry* ; Microbiota/drug effects* ; Plant Roots/metabolism*

PURPOSE: To investigate the protective effect of sub-hypothermic mechanical perfusion combined with membrane lung oxygenation on ischemic hypoxic injury of yorkshire brain tissue caused by traumatic blood loss. METHODS: This article performed a random controlled trial. Brain tissue of 7 yorkshire was selected and divided into the sub-low temperature anterograde machine perfusion group (n = 4) and the blank control group (n = 3) using the random number table method. A yorkshire model of brain tissue injury induced by traumatic blood loss was established. Firstly, the perfusion temperature and blood oxygen saturation were monitored in real-time during the perfusion process. The number of red blood cells, hemoglobin content, NA⁺, K⁺, and Ca²⁺ ions concentrations and pH of the perfusate were detected. Following perfusion, we specifically examined the parietal lobe to assess its water content. The prefrontal cortex and hippocampus were then dissected for histological evaluation, allowing us to investigate potential regional differences in tissue injury. The blank control group was sampled directly before perfusion. All statistical analyses and graphs were performed using GraphPad Prism 8.0 Student t-test. All tests were two-sided, and p value of less than 0.05 was considered to indicate statistical significance. RESULTS: The contents of red blood cells and hemoglobin during perfusion were maintained at normal levels but more red blood cells were destroyed 3 h after the perfusion. The blood oxygen saturation of the perfusion group was maintained at 95% - 98%. NA⁺ and K⁺ concentrations were normal most of the time during perfusion but increased significantly at about 4 h. The Ca²⁺ concentration remained within the normal range at each period. Glucose levels were slightly higher than the baseline level. The pH of the perfusion solution was slightly lower at the beginning of perfusion, and then gradually increased to the normal level. The water content of brain tissue in the sub-low and docile perfusion group was 78.95% ± 0.39%, which was significantly higher than that in the control group (75.27% ± 0.55%, t = 10.49, p < 0.001), and the difference was statistically significant. Compared with the blank control group, the structure and morphology of pyramidal neurons in the prefrontal cortex and CA1 region of the hippocampal gyrus were similar, and their integrity was better. The structural integrity of granulosa neurons was destroyed and cell edema increased in the perfusion group compared with the blank control group. Immunofluorescence staining for glail fibrillary acidic protein and Iba1, markers of glial cells, revealed well-preserved cell structures in the perfusion group. While there were indications of abnormal cellular activity, the analysis showed no significant difference in axon thickness or integrity compared to the 1-h blank control group. CONCLUSIONS Mild hypothermic machine perfusion can improve ischemia and hypoxia injury of yorkshire brain tissue caused by traumatic blood loss and delay the necrosis and apoptosis of yorkshire brain tissue by continuous oxygen supply, maintaining ion homeostasis and reducing tissue metabolism level.
Animals ; Perfusion/methods* ; Disease Models, Animal ; Brain Injuries/etiology* ; Swine ; Male ; Hypothermia, Induced/methods*

OBJECTIVES: To investigate the clinical characteristics and prognosis of acute erythroleukemia (AEL) in children. METHODS: A retrospective analysis was conducted on the clinical data, treatment, and prognosis of 8 children with AEL treated at the First Affiliated Hospital of Zhengzhou University from January 2013 to December 2023. RESULTS: Among the 7 patients with complete bone marrow morphological analysis, 4 exhibited trilineage dysplasia, with a 100% incidence of erythroid dysplasia (7/7), a 71% incidence of myeloid dysplasia (5/7), and a 57% incidence of megakaryocytic dysplasia (4/7). Immunophenotyping revealed that myeloid antigens were primarily expressed as CD13, CD33, CD117, CD38, and CD123, with 4 cases expressing erythroid antigens CD71 and 2 cases expressing CD235a. Chromosomal analysis indicated that 2 cases presented with abnormal karyotypes, including +8 in one case and +4 accompanied by +6 in another; no complex karyotypes were observed. Genetic abnormalities were detected in 4 cases, with fusion genes including one case each of dup MLL positive and EVI1 positive, as well as mutations involving KRAS, NRAS, WT1, and UBTF. Seven patients received chemotherapy, with 6 achieving remission after one course of treatment; 2 underwent hematopoietic stem cell transplantation, and all had disease-free survival. Follow-up (median follow-up time of 6 months) showed that only 3 patients survived (2 cases after hematopoietic stem cell transplantation and 1 case during treatment). CONCLUSIONS Children with AEL have unique clinical and biological characteristics, exhibit poor treatment response, and have a poor prognosis; however, hematopoietic stem cell transplantation may improve overall survival rates.
Humans ; Male ; Female ; Prognosis ; Child, Preschool ; Retrospective Studies ; Child ; Leukemia, Erythroblastic, Acute/diagnosis* ; Infant ; Adolescent

OBJECTIVES: To investigate the clinical features and prognosis of children with non-Down-syndrome-related acute megakaryoblastic leukemia (non-DS-AMKL). METHODS: A retrospective analysis was conducted on the medical data of 17 children with non-DS-AMKL who were admitted to Children's Hospital of The First Affiliated Hospital of Zhengzhou University from January 2013 to December 2023, and their clinical features, treatment, and prognosis were summarized. RESULTS: Among the 17 children with non-DS-AMKL, there were 8 boys and 9 girls. Fourteen patients had an onset age of less than 36 months, with a median age of 21 months (range:13-145 months). Immunophenotyping results showed that 16 children were positive for CD61 and 13 were positive for CD41. The karyotype analysis was performed on 16 children, with normal karyotype in 6 children and abnormal karyotype in 9 children, among whom 5 had complex karyotype and 1 had no mitotic figure. Detected fusion genes included EVI1, NUP98-KDM5A, KDM5A-MIS18BP1, C22orf34-BRD1, WT1, and MLL-AF9. Genetic alterations included TET2, D7S486 deletion (suggesting 7q-), CSF1R deletion, and PIM1. All 17 children received chemotherapy, among whom 16 (94%) achieved complete remission after one course of induction therapy, and 1 child underwent hematopoietic stem cell transplantation (HSCT) and remained alive and disease-free. Of all children, 7 experienced recurrence, among whom 1 child received HSCT and died of graft-versus-host disease. At the last follow-up, six patients remained alive and disease-free. CONCLUSIONS Non-DS-AMKL primarily occurs in children between 1 and 3 years of age. The patients with this disorder have a high incidence rate of chromosomal abnormalities, with complex karyotypes in most patients. Some patients harbor fusion genes or gene mutations. Although the initial remission rate is high, the long-term survival rate remains low.
Humans ; Male ; Female ; Leukemia, Megakaryoblastic, Acute/etiology* ; Child, Preschool ; Infant ; Child ; Retrospective Studies ; Prognosis ; Down Syndrome/complications*

Digital technologies have become an integral part of complete denture restoration. With advancement in computer-aided design and computer-aided manufacturing (CAD/CAM), tools such as intraoral scanning, facial scanning, 3D printing, and numerical control machining are reshaping the workflow of complete denture restoration. Unlike conventional methods that rely heavily on clinical experience and manual techniques, digital technologies offer greater precision, predictability, and efficacy. They also streamline the process by reducing the number of patient visits and improving overall comfort. Despite these improvements, the clinical application of digital complete denture restoration still faces challenges that require further standardization. The major issues include appropriate case selection, establishing consistent digital workflows, and evaluating long-term outcomes. To address these challenges and provide clinical guidance for practitioners, this expert consensus outlines the principles, advantages, and limitations of digital complete denture technology. The aim of this review was to offer practical recommendations on indications, clinical procedures and precautions, evaluation metrics, and outcome assessment to support digital restoration of complete denture in clinical practice.
Humans ; Denture, Complete ; Computer-Aided Design ; Denture Design/methods* ; Consensus ; Printing, Three-Dimensional