BACKGROUND:Maxillofacial bone three-dimensional(3D)printing technology has been widely used in clinical diagnosis and treatment,but the data source before performing maxillofacial bone 3D printing mainly comes from the CT scanning data.The lens,thyroid and other parts of the human body are extremely sensitive to X-rays;therefore,it is particularly important to effectively reduce the dose of CT radiation when acquiring the data source.OBJECTIVE:To explore the feasibility of low-dose CT technology in optimizing radiation dose for maxillofacial bone 3D printing.METHODS:The medical records of 65 patients who underwent maxillofacial bone 3D printing in the Department of Stomatology at the General Hospital of Northern Theater Command from March 2021 to December 2023 were retrospectively collected and categorized into a conventional CT-dose 3D printing group(conventional CT-dose,120 kVp,automated tube current modulation,n=32)and a low-CT-dose 3D printing group(low-CT-dose group,80 kVp,automated tube current modulation,n=33).The effective dose of radiation was calculated and compared between the two groups.A Likert scale was used to evaluate the quality of 3D printing in the two groups,and the measurement bias and consistency between evaluators were measured using the Bland-Altman method.RESULTS AND CONCLUSION:(1)There was no significant difference in the general demographic characteristics(age,height,weight,body mass,sex,and body mass index)between the two groups(all P＞0.05).(2)The effective dose value of the low CT-dose 3D printing group was(0.3±0.1)mSv,which was about 62.5％lower than that in the conventional CT-dose 3D printing group[(0.8±0.1)mSv].(3)There was no significant difference in the subjective scoring of 3D printing quality between the two groups(all P＞0.05).The subjective consistency among evaluators was good,with Kappa values of 0.85,0.80,and 0.76.The scatter points in the Bland-Altman for both protocols were uniformly distributed within the standard deviation line,indicating good consistency between the two groups.To conclude,low-dose CT technology can be effectively applied in maxillofacial bone 3D printing,reducing radiation dose without affecting the quality of 3D printing.

BACKGROUND:Maxillofacial bone three-dimensional(3D)printing technology has been widely used in clinical diagnosis and treatment,but the data source before performing maxillofacial bone 3D printing mainly comes from the CT scanning data.The lens,thyroid and other parts of the human body are extremely sensitive to X-rays;therefore,it is particularly important to effectively reduce the dose of CT radiation when acquiring the data source.OBJECTIVE:To explore the feasibility of low-dose CT technology in optimizing radiation dose for maxillofacial bone 3D printing.METHODS:The medical records of 65 patients who underwent maxillofacial bone 3D printing in the Department of Stomatology at the General Hospital of Northern Theater Command from March 2021 to December 2023 were retrospectively collected and categorized into a conventional CT-dose 3D printing group(conventional CT-dose,120 kVp,automated tube current modulation,n=32)and a low-CT-dose 3D printing group(low-CT-dose group,80 kVp,automated tube current modulation,n=33).The effective dose of radiation was calculated and compared between the two groups.A Likert scale was used to evaluate the quality of 3D printing in the two groups,and the measurement bias and consistency between evaluators were measured using the Bland-Altman method.RESULTS AND CONCLUSION:(1)There was no significant difference in the general demographic characteristics(age,height,weight,body mass,sex,and body mass index)between the two groups(all P＞0.05).(2)The effective dose value of the low CT-dose 3D printing group was(0.3±0.1)mSv,which was about 62.5％lower than that in the conventional CT-dose 3D printing group[(0.8±0.1)mSv].(3)There was no significant difference in the subjective scoring of 3D printing quality between the two groups(all P＞0.05).The subjective consistency among evaluators was good,with Kappa values of 0.85,0.80,and 0.76.The scatter points in the Bland-Altman for both protocols were uniformly distributed within the standard deviation line,indicating good consistency between the two groups.To conclude,low-dose CT technology can be effectively applied in maxillofacial bone 3D printing,reducing radiation dose without affecting the quality of 3D printing.

Objective: To systematically analyze the revisions content and technological development trends of microbiological standards in the Chinese Pharmacopoeia (ChP) 2025 Edition, and explore its novel requirements in risk-based pharmaceutical product lifecycle management.
Methods: A comprehensive review was conducted on 26 microbiological-related standards to summarize the revision directions and scientific implications from perspectives including the revision overview, international harmonization of microbiological standards, risk-based quality management system, and novel tools and methods with Chinese characteristics.
Results: The ChP 2025 edition demonstrates three prominent features in microbiological-related standards: enhanced international harmonization, introduced emerging molecular biological technologies, and established a risk-based microbiological quality control system.
Conclusion: The new edition of the Pharmacopoeia has systematically constructed a microbiological standard system, which significantly improves the scientificity, standardization and applicability of the standards, providing a crucial support for advancing the microbiological quality control in pharmaceutical industries of China.

Objective To investigate the distribution and antimicrobial resistance profiles of clinically isolated Haemophilus influenzae and Moraxella catarrhalis in hospitals across China from 2015 to 2021,and provide evidence for rational use of antimicrobial agents.Methods Data of H.influenzae and M.catarrhalis strains isolated from 2015 to 2021 in CHINET program were collected for analysis,and antimicrobial susceptibility testing was performed by disc diffusion method or automated systems according to the uniform protocol of CHINET.The results were interpreted according to the CLSI breakpoints in 2022.Beta-lactamases was detected by using nitrocefin disk.Results From 2015 to 2021,a total of 43 642 strains of Haemophilus species were isolated,accounting for 2.91％of the total clinical isolates and 4.07％of Gram-negative bacteria in CHINET program.Among the 40 437 strains of H.influenzae,66.89％were isolated from children and 33.11％were isolated from adults.More than 90％of the H.influenzae strains were isolated from respiratory tract specimens.The prevalence of β-lactamase was 53.79％in H.influenzae strains.The H.influenzae strains isolated from children showed higher resistance rate than the strains isolated from adults.Overall,779 strains of H.influenzae did not produce β-lactamase but were resistant to ampicillin(BLNAR).Beta-lactamase-producing strains showed significantly higher resistance rates to these antimicrobial agents than the β-lactamase-nonproducing strains.Of the 16 191 M.catarrhalis strains,80.06％were isolated from children and 19.94％isolated from adults.M.catarrhalis strains were mostly susceptible to both amoxicillin-clavulanic acid and cefuroxime,evidenced by resistance rate lower than 2.0％.Conclusions The emergence of antibiotic-resistant H.influenzae due to β-lactamase production poses a challenge for clinical anti-infective treatment.Therefore,it is very important to implement antibiotic resistance surveillance for H.influenzae and guide rational antibiotic use.All local clinical microbiology laboratories should actively improve antibiotic susceptibility testing and strengthen antibiotic resistance surveillance for H.influenzae.

The microbial limit standards in the Chinese Pharmacopoeia 2020 edition primarily focus on total aerobic microbial count and specified objectionable microorganisms,which are insufficient for comprehensively assessing the potential risks posed by microbial contamination to drug efficacy and patient safety.With the increasing com-plexity of rising regulatory requirements,there is an urgent need to establish a scientific and systematic microbial risk assessment and control framework.In response,the Chinese Pharmacopoeia 2025 edition,introduces a new general guideline 9212 Risk Assessment and Control of Unacceptable Microorganisms for Non-sterile Products.This chapter systematically constructs a framework for the identification and control of risks associated with unacceptable microorganisms,filling a gap in the relevant field within international pharmacopoeias.This article systematically elaborates on its key elements based on its core framework and content.It covers the development background,core concepts,testing and identification strategies,evaluation of risk characterization factors,formulation of risk control measures,and implementation pathways.The aim is to provide pharmaceutical enterprises and regulatory agencies with systematic and clear practical guidance.

Although low temperature plasma ablation technology has significant advantages in clinical applications,its poor stability,high power consumption and thermal injuries to the tissues are still key factors limiting its widespread use.To address these issues,a device that uses bipolar pulses to excite plasma is developed,and it can flexibly adjust its output voltage,frequency and duty cycle,effectively reducing breakdown voltage and power consumption.By conducting simulation and saltwater discharge experiments,the excitation process of plasma is elaborated in detail.Meanwhile,the effects of two different pulse excitation modes on plasma excitation are discussed and compared.The results show that the bipolar pulse excitation mode is advantageous in reducing discharge current and breakdown voltage,and shortening the formation time of the vapor layer,which effectively relieves thermal injuries to the tissues.Finally,the broad application potential of the plasma ablation device is demonstrated in plasma ablation experiments which are conducted at different voltages,with pork as the experimental material.The study provides a new theoretical basis and practical guidance for the application of plasma ablation technology in minimally invasive surgery.

Cemental tear is a rare and indetectable condition unless obvious clinical signs present with the involvement of surrounding periodontal and periapical tissues. Due to its clinical manifestations similar to common dental issues, such as vertical root fracture, primary endodontic diseases, and periodontal diseases, as well as the low awareness of cemental tear for clinicians, misdiagnosis often occurs. The critical principle for cemental tear treatment is to remove torn fragments, and overlooking fragments leads to futile therapy, which could deteriorate the conditions of the affected teeth. Therefore, accurate diagnosis and subsequent appropriate interventions are vital for managing cemental tear. Novel diagnostic tools, including cone-beam computed tomography (CBCT), microscopes, and enamel matrix derivatives, have improved early detection and management, enhancing tooth retention. The implementation of standardized diagnostic criteria and treatment protocols, combined with improved clinical awareness among dental professionals, serves to mitigate risks of diagnostic errors and suboptimal therapeutic interventions. This expert consensus reviewed the epidemiology, pathogenesis, potential predisposing factors, clinical manifestations, diagnosis, differential diagnosis, treatment, and prognosis of cemental tear, aiming to provide a clinical guideline and facilitate clinicians to have a better understanding of cemental tear.
Humans ; Dental Cementum/injuries* ; Consensus ; Diagnosis, Differential ; Cone-Beam Computed Tomography ; Tooth Fractures/therapy*

ObjectiveTo investigate the current status of latent tuberculosis infection (LTBI) among the elderly population in rural areas of Changxing County, Zhejiang Province, and to provide an evidence for the development of LTBI prevention and control measures. MethodsBetween January and May 2024, elderly individuals participating in urban and rural residents’ health checkups were screened for Mycobacterium tuberculosis infection using a domestically produced interferon-γ release assay (IGRA) kit. Individuals tested positive by IGRA but without active tuberculosis were classified as LTBI cases. The prevalence of LTBI among the participants was subsequently analyzed. ResultsAmong the 6 765 subjects, 637 tested positive by IGRA, including one identified active tuberculosis patient, resulting in a LTBI prevalence rate of 9.40%. There was a statistically significant difference in positivity rates across different IGRA methodologies (χ²=35.530, P<0.001). Higher LTBI rate was observed in males, individuals with a history of diabetes mellitus, and those with a history of pulmonary tuberculosis, exhibiting statistically significant differences (χ²=32.401, P<0.001; χ²=5.789, P=0.020; χ²=39.248, P<0.001, respectively.) No statistically significant difference in LTBI rate was found across different age groups (χ²=0.238, P=0.971). ConclusionThe prevalence of LTBI among the elderly rural residents in Changxing County is relatively low. Male, individuals with a history of diabetes mellitus, and those with a history of pulmonary tuberculosis have an increased risk of LTBI, warranting targeted risk monitoring and timely interventions.

BACKGROUND: Spicy food consumption has been reported to be inversely associated with mortality from multiple diseases. However, the effect of spicy food intake on the incidence of vascular diseases in the Chinese population remains unclear. This study was conducted to explore this association. METHODS: This study was performed using the large-scale China Kadoorie Biobank (CKB) prospective cohort of 486,335 participants. The primary outcomes were vascular disease, ischemic heart disease (IHD), major coronary events (MCEs), cerebrovascular disease, stroke, and non-stroke cerebrovascular disease. A Cox proportional hazards regression model was used to assess the association between spicy food consumption and incident vascular diseases. Subgroup analysis was also performed to evaluate the heterogeneity of the association between spicy food consumption and the risk of vascular disease stratified by several basic characteristics. In addition, the joint effects of spicy food consumption and the healthy lifestyle score on the risk of vascular disease were also evaluated, and sensitivity analyses were performed to assess the reliability of the association results. RESULTS: During a median follow-up time of 12.1 years, a total of 136,125 patients with vascular disease, 46,689 patients with IHD, 10,097 patients with MCEs, 80,114 patients with cerebrovascular disease, 56,726 patients with stroke, and 40,098 patients with non-stroke cerebrovascular disease were identified. Participants who consumed spicy food 1-2 days/week (hazard ratio [HR] = 0.95, 95% confidence interval [95% CI] = [0.93, 0.97], P <0.001), 3-5 days/week (HR = 0.96, 95% CI = [0.94, 0.99], P = 0.003), and 6-7 days/week (HR = 0.97, 95% CI = [0.95, 0.99], P = 0.002) had a significantly lower risk of vascular disease than those who consumed spicy food less than once a week ( Ptrend <0.001), especially in those who were younger and living in rural areas. Notably, the disease-based subgroup analysis indicated that the inverse associations remained in IHD ( Ptrend = 0.011) and MCEs ( Ptrend = 0.002) risk. Intriguingly, there was an interaction effect between spicy food consumption and the healthy lifestyle score on the risk of IHD ( Pinteraction = 0.037). CONCLUSIONS Our findings support an inverse association between spicy food consumption and vascular disease in the Chinese population, which may provide additional dietary guidance for the prevention of vascular diseases.
Humans ; Male ; Female ; Prospective Studies ; Middle Aged ; Aged ; Vascular Diseases/etiology* ; Risk Factors ; China/epidemiology* ; Adult ; Proportional Hazards Models ; Cerebrovascular Disorders/epidemiology* ; East Asian People