ObjectiveHeadspace solid-phase microextraction-gas chromatography-mass spectrometry（HS-SPME-GC-MS） and GC-triple quadrupole MS（GC-QqQ-MS） in combination with non-targeted and targeted metabolomics were employed to systematically analyze the chemical composition differences of Xihuangwan prepared with natural musk and artificial musk， and establish an identification system for them. MethodsThe volatile components of 9 batches of Xihuangwan samples from 8 manufacturers were analyzed by HS-SPME-GC-MS non-targeted metabolomics， and identified by comparing their MS data with the National Institute of Standards and Technology（NIST） spectral library. Orthogonal partial least squares-discriminant analysis（OPLS-DA） was used to identify differential volatile components of Xihuangwan prepared with natural musk and artificial musk. Additionally， GC-QqQ-MS targeted metabolomics was applied to quantify the levels of α-pinene， β-elemene， muscone， dehydroepiandrosterone， bornyl acetate， and octyl acetate in 27 batches of samples from 9 manufacturers. Cluster analysis， principal component analysis（PCA）， and partial least squares-discriminant analysis（PLS-DA） were conducted to further explore the differences in volatile components between Xihuangwan samples prepared with natural musk and artificial musk. ResultsNon-targeted metabolomics identified 291 volatile compounds in Xihuangwan， including alkanes， esters， alkanes， alcohols， ketones， naphthalenes and others. OPLS-DA analysis revealed distinct separation between Xihuangwan samples containing artificial musk（A1， C1， D1， E1， F1， G1， I1） and those containing natural musk（H1， H3）. A total of 30 differential metabolites were identified. The relative contents of these 30 differential metabolites were visualized using a radar chart， revealing significant differences in the levels of octanol， borneol acetate and muscone. Cluster analysis and PCA results from targeted metabolomics indicated that Xihuangwan could be classified into two distinct groups：one composed of natural musk（H1， H3） and the other of artificial musk， sample H2. PLS-DA identified muscone， octyl acetate， and dehydroepiandrosterone as key differential volatile components. Although no significant difference was observed in the content of octyl acetate between the two groups， statistically significant differences were found for muscone and dehydroepiandrosterone（P<0.05）. ConclusionMuscone and dehydroepiandrosterone can be used for the differentiation of Xihuangwan samples containing natural musk from those containing artificial musk. This study systematically and comprehensively analyzed the differences in the types and contents of major volatile components in Xihuangwan prepared with natural musk and artificial musk， providing a scientific basis for quality evaluation and control of Xihuangwan.

ObjectiveHeadspace solid-phase microextraction-gas chromatography-mass spectrometry（HS-SPME-GC-MS） and GC-triple quadrupole MS（GC-QqQ-MS） in combination with non-targeted and targeted metabolomics were employed to systematically analyze the chemical composition differences of Xihuangwan prepared with natural musk and artificial musk， and establish an identification system for them. MethodsThe volatile components of 9 batches of Xihuangwan samples from 8 manufacturers were analyzed by HS-SPME-GC-MS non-targeted metabolomics， and identified by comparing their MS data with the National Institute of Standards and Technology（NIST） spectral library. Orthogonal partial least squares-discriminant analysis（OPLS-DA） was used to identify differential volatile components of Xihuangwan prepared with natural musk and artificial musk. Additionally， GC-QqQ-MS targeted metabolomics was applied to quantify the levels of α-pinene， β-elemene， muscone， dehydroepiandrosterone， bornyl acetate， and octyl acetate in 27 batches of samples from 9 manufacturers. Cluster analysis， principal component analysis（PCA）， and partial least squares-discriminant analysis（PLS-DA） were conducted to further explore the differences in volatile components between Xihuangwan samples prepared with natural musk and artificial musk. ResultsNon-targeted metabolomics identified 291 volatile compounds in Xihuangwan， including alkanes， esters， alkanes， alcohols， ketones， naphthalenes and others. OPLS-DA analysis revealed distinct separation between Xihuangwan samples containing artificial musk（A1， C1， D1， E1， F1， G1， I1） and those containing natural musk（H1， H3）. A total of 30 differential metabolites were identified. The relative contents of these 30 differential metabolites were visualized using a radar chart， revealing significant differences in the levels of octanol， borneol acetate and muscone. Cluster analysis and PCA results from targeted metabolomics indicated that Xihuangwan could be classified into two distinct groups：one composed of natural musk（H1， H3） and the other of artificial musk， sample H2. PLS-DA identified muscone， octyl acetate， and dehydroepiandrosterone as key differential volatile components. Although no significant difference was observed in the content of octyl acetate between the two groups， statistically significant differences were found for muscone and dehydroepiandrosterone（P<0.05）. ConclusionMuscone and dehydroepiandrosterone can be used for the differentiation of Xihuangwan samples containing natural musk from those containing artificial musk. This study systematically and comprehensively analyzed the differences in the types and contents of major volatile components in Xihuangwan prepared with natural musk and artificial musk， providing a scientific basis for quality evaluation and control of Xihuangwan.

Objective:To investigate the dosimetry effect of rotational errors of multi-channel cylinder vaginal applicator of intravaginal irradiation after surgery of endometrial cancer.Methods:A total of 18 patients who underwent surgery of endometrial cancer at Peking Union Medical College Hospital from June to December 2022 were selected.The plans of patients who adopted the treatment of multi-channel cylinder applicator of vagina were retrospectively analyzed,which maintained the same retained mode with clinical plan.The applicator was rotated clockwise by 22.5? and 45.0?,respectively,simulating the rotational errors that occurred in placing the applicator among clinical inter-fractions.And then,the changes of dosimetry of target area and organs at risk(OAR)under two kinds of rotation amplitudes were further analyzed.Results:When the applicator was rotated as 22.5?,the minimum doses to 90%volumes of CTV by 2.03%than that of clinical plan,which was significantly different(t=5.86,P<0.05),and the maximal doses to 2cc of OARs of bladder and rectum respectively increased 2.35%and 2.71%,and the differences of them were statistically significant(t=-3.49,-2.40,P<0.05),respectively.When the applicator was rotated as 45?,the D90 of the target area decreased by 5.75%than that of clinical plan,which was statistically significant(t=14.07,P<0.05).The D2cc values of the bladder and rectum increased respectively by 6.50%and 9.49%than that of clinical plan,which were statistically significant(t=-7.72,-6.9,P<0.05).The differences of the exposed doses of sigmoid colon and small intestine after the applicator was rotated by 22.5? and 45.0? between the plan and original plan were respectively less,which were not statistical significance.Conclusion:The multi-channel cylinder applicator can provide individualized dose distribution in intravaginal irradiation.However,attention should be paid to the placement of the applicator when patients undergo inter-fractional treatment,in order to avoid deviations in the angular alignment from the original plan.This can impact the dosages of the target area and OARs.

Objective:To analyze the differences in dosimetric quality and plan complexity of volumetric modulated arc therapy (VMAT) plans based on Halcyon 2.0 and Truebeam for different treatment sites of the patients.Methods:Halcyon 2.0 VMAT plans in head & neck, chest, abdomen, and pelvis treatment sites of 49 cases were retrospectively selected and the VMAT plans were re-designed based on Truebeam with the same optimization parameters. The differences in dosimetric metrics and plan complexity between the two types of plans were compared and analyzed. P<0.05 was considered as statistically significant. Results:In terms of PTV, Halcyon 2.0 plans showed better homogeneity index (HI), conformal index (CI) in the head & neck and chest. Besides, Halcyon 2.0 plans yielded better D 98% and CI in the abdomen and better D 2% in the pelvis. For organs at risk (OAR), the D 20% and D mean of bilateral lungs, and D meanof heart for Halcyon 2.0 plans in the chest were lower than those for Truebeam plans (all P<0.05). For the complexity metrics, the median average aperture area variability (AAV) of Halcyon 2.0 plans in the head & neck, abdomen and pelvis were 0.414, 0.425 and 0.432, which were better than 0.385, 0.368 and 0.361 of Truebeam plans in the corresponding sites, respectively. In the abdomen and pelvis, Halcyon 2.0 plans showed better median modulation complexity score (MCS) than Truebeam plans (0.320 vs. 0.268, 0.303 vs. 0.282; both P<0.05). The median small aperture score (SAS) for all plans of Halcyon 2.0 were better than that of Truebeam plans (all P<0.05), and the median plan average beam area (PA) of all plans of Halcyon 2.0 were larger than that of Truebeam plans (all P<0.05). Conclusions:Compared with conventional fractionated VMAT plans based on Halcyon 2.0 and Truebeam, Halcyon 2.0 plans have similar or even better dosimetric quality. However, Halcyon 2.0 plans have lower plan complexity, which makes it an advantage in clinical application.

Objective:To explore the feasibility of StereoPhan (SP) phantoms and SRS MapCHECK (SMC) semiconductor matrices in the dose verification of HyperArc (HA) plans for patients with brain metastases (BM).Methods:A total of 16 BM patients who received HA radiotherapy in the Peking Union Medical College Hospital were enrolled in this study. The ion chamber and the SMC semiconductor matrix were inserted into SP phantoms, respectively. The point and planar doses in HA verification plans were measured and compared with the calculated data of the treatment planning system (TPS). The criteria for planar dose γ analysis were set at 2 mm/3%, 2 mm/2%, 1 mm/3%, and 1 mm/2%.Results:The mean deviation of point doses in 16 patients was 1.33%±0.84%. Based on the above criteria, the γ pass rates of planar doses were 99.72%±0.46%, 98.93%±1.32%, 98.85%±1.79%, and 97.13%±3.19%, respectively.Conclusions:SP phantoms and SMC semiconductor matrices are applicable to the dose verification of HA plans for BM patients. The analytical criteria of 3% and 1 mm/2% can be used for verifying point and planar doses, respectively.

OBJECTIVE To optimize the extraction and separation process of chebulagic acid and chebulinic acid from Terminalia chebula. METHODS Based on single factor experiment， with particle size， liquid-solid ratio， extraction time and extraction times as factors， using the contents of chebulagic acid and chebulinic acid as indexes， orthogonal experiment was designed to optimize the extraction process of chebulagic acid and chebulinic acid. Taking sample concentration， elution solvent and the ratio of eighteen-group bonded silicone reverse phase （ODS） to the amount of raw medicine as factors， the separation processes of chebulagic acid and chebulinic acid were optimized. RESULTS The optimal extraction process of chebulagic acid and chebulinic acid included ethanol volume fraction of 70%， ultrasonic extraction， particle size of 120 mesh， liquid-solid ratio of 25∶1 （mL/g）， extraction time of 20 min， and extracting for 2 times. After 3 experiments， the average comprehensive score was 99.33 （RSD＝ 0.68%， n＝3）， and the average contents of chebulagic acid and chebulinic acid were 107.05 and 58.32 mg/g， respectively. The optimal separation process of the two components included the concentration of sample loading solution was 0.5 g/mL （1 mL was equivalent to 0.5 g of medicinal materials）， the ratio of ODS to the amount of raw medicine was 10∶1.5 （g/g）， methanol-water （1∶4， V/V） eluted chebulagic acid， methanol-water （3∶7， V/V） eluted chebulinic acid. After 3 experiments， the average total yields of the two components were 53.33%， 39.23%. After recrystallization， the purity of both components was 100%. CONCLUSIONS Established extraction and separation process of chebulagic acid and chebulinic acid is simple and feasible.

Objective:To study the feasibility of using pelvic iterative cone beam CT images for dose calculation of radiation therapy planning, so as to provide support for adaptive radiotherapy.Methods:The CIRS 062 M phantom was scanned by Varian Halcyon v2.0 o-ring accelerator, and the average CT number under different scattering conditions was calculated, and then the ICBCT-ED conversion curve was established. CT images of CIRS 002PRA pelvic IMRT phantom and ICBCT images at different positions were collected. Treatment plan using VMAT technique based on CT image was designed and transplanted into ICBCT image with dose recalculated. The differences of gamma passing rate among target volume, organs at risk and 3-dimensional dose were compared. Based on the actual treatment plan of patients, the differences of 3-dimensional dose gamma passing rate in 10 pelvic patients were analyzed retrospectively.Results:There was a large CT value deviation at central position between the isolated no-scattering condition and the full-scattering condition, and the maximum deviation was 144 HU. The CT values of other positions in full-scattering condition were similar to those of the central position, and the maximum deviation was less than 50 HU. Based on the calculated result of ICBCT images at different positions of the pelvic phantom, the dose deviation of the target volume or organs at risk was less than 1 Gy. Compared with the plan based on CT images, the average 3-dimensional dose gamma passing rate under the criteria of 1% dose difference (DD)/1 mm distance-to-agreement (DTA) and 2% DD/2 mm DTA in plan based on ICBCT images were (88.86 ±1.18)% and (98.38±0.89)%, respectively. The ranges of average 3-dimensional dose gamma passing rate under the criteria of 2% DD/2 mm DTA and 3% DD/3 mm DTA in 10 patients with pelvic tumors were 90.03%-95.43% and 93.58%-97.78%, respectively, and the worst result was only 85.90% and 92.90%, respectively. The main reason of the worst result was the dose difference caused by large variation of bladder contour due to over-filling.Conclusions:Under comprehensive scattering conditions, the ICBCT-ED conversion curve is reconstructed and the treatment plan can be designed by using the ICBCT image of Halcyon v2.0 linear accelerator. The accuracy meets the standards of clinical application, which provides assurance for adaptive radiotherapy in the future.

The problems in digitalization of ancient medical documents were described according to its status quo analysis, with certain measures for their solution proposed in order tospeed up the digitalization of ancient medical documents, improve the use of ancient medical documents, and promote the rapid development of medical and health cause.

Objective To assess the associations of 5-HTT gene polymorphism with depression by Metaanalysis.Method A comprehensive search for articles from January 2000 to July 2009 was conducted from Chinese BioMedical Literature Database on disc (CBMdisc) and PubMed databases.All related case-control studies were collected and the results were analyzed using RevMan 4.2.2 software.Results A total of 1284 cases and 1243 controls were collected from 14 studies.The combined data statistics revealed that the pooled ORs ( 95%CI) for genotype SS,SL,LL were 1.64 ( 1.37 ～1.97) (P＜0.00001),0.82 (0.66 ～ 1.03) (P＞0.01) and 0.74 (0.61 ～ 0.90) (P ＜ 0.01 ) respectively.Conclusions Polymorphisms of 5-HTT gene have significant association with depression,SS genotype may increase the risk for depression,LL genotype may be protective factors for depression.