BACKGROUND:Maxillofacial bone three-dimensional(3D)printing technology has been widely used in clinical diagnosis and treatment,but the data source before performing maxillofacial bone 3D printing mainly comes from the CT scanning data.The lens,thyroid and other parts of the human body are extremely sensitive to X-rays;therefore,it is particularly important to effectively reduce the dose of CT radiation when acquiring the data source.OBJECTIVE:To explore the feasibility of low-dose CT technology in optimizing radiation dose for maxillofacial bone 3D printing.METHODS:The medical records of 65 patients who underwent maxillofacial bone 3D printing in the Department of Stomatology at the General Hospital of Northern Theater Command from March 2021 to December 2023 were retrospectively collected and categorized into a conventional CT-dose 3D printing group(conventional CT-dose,120 kVp,automated tube current modulation,n=32)and a low-CT-dose 3D printing group(low-CT-dose group,80 kVp,automated tube current modulation,n=33).The effective dose of radiation was calculated and compared between the two groups.A Likert scale was used to evaluate the quality of 3D printing in the two groups,and the measurement bias and consistency between evaluators were measured using the Bland-Altman method.RESULTS AND CONCLUSION:(1)There was no significant difference in the general demographic characteristics(age,height,weight,body mass,sex,and body mass index)between the two groups(all P＞0.05).(2)The effective dose value of the low CT-dose 3D printing group was(0.3±0.1)mSv,which was about 62.5％lower than that in the conventional CT-dose 3D printing group[(0.8±0.1)mSv].(3)There was no significant difference in the subjective scoring of 3D printing quality between the two groups(all P＞0.05).The subjective consistency among evaluators was good,with Kappa values of 0.85,0.80,and 0.76.The scatter points in the Bland-Altman for both protocols were uniformly distributed within the standard deviation line,indicating good consistency between the two groups.To conclude,low-dose CT technology can be effectively applied in maxillofacial bone 3D printing,reducing radiation dose without affecting the quality of 3D printing.

BACKGROUND:Maxillofacial bone three-dimensional(3D)printing technology has been widely used in clinical diagnosis and treatment,but the data source before performing maxillofacial bone 3D printing mainly comes from the CT scanning data.The lens,thyroid and other parts of the human body are extremely sensitive to X-rays;therefore,it is particularly important to effectively reduce the dose of CT radiation when acquiring the data source.OBJECTIVE:To explore the feasibility of low-dose CT technology in optimizing radiation dose for maxillofacial bone 3D printing.METHODS:The medical records of 65 patients who underwent maxillofacial bone 3D printing in the Department of Stomatology at the General Hospital of Northern Theater Command from March 2021 to December 2023 were retrospectively collected and categorized into a conventional CT-dose 3D printing group(conventional CT-dose,120 kVp,automated tube current modulation,n=32)and a low-CT-dose 3D printing group(low-CT-dose group,80 kVp,automated tube current modulation,n=33).The effective dose of radiation was calculated and compared between the two groups.A Likert scale was used to evaluate the quality of 3D printing in the two groups,and the measurement bias and consistency between evaluators were measured using the Bland-Altman method.RESULTS AND CONCLUSION:(1)There was no significant difference in the general demographic characteristics(age,height,weight,body mass,sex,and body mass index)between the two groups(all P＞0.05).(2)The effective dose value of the low CT-dose 3D printing group was(0.3±0.1)mSv,which was about 62.5％lower than that in the conventional CT-dose 3D printing group[(0.8±0.1)mSv].(3)There was no significant difference in the subjective scoring of 3D printing quality between the two groups(all P＞0.05).The subjective consistency among evaluators was good,with Kappa values of 0.85,0.80,and 0.76.The scatter points in the Bland-Altman for both protocols were uniformly distributed within the standard deviation line,indicating good consistency between the two groups.To conclude,low-dose CT technology can be effectively applied in maxillofacial bone 3D printing,reducing radiation dose without affecting the quality of 3D printing.

Objective To explore the impact of meteorological factors on the incidence of scarlet fever in Xicheng District of Beijing, and to provide a scientific basis for formulating targeted prevention and control measures. Methods Daily scarlet fever incidence data and corresponding meteorological data from 2010 to 2019 in Xicheng District of Beijing were collected. Using year, month, and day of the week as time-stratified variables, a conditional logistic regression model with a time-stratified case-crossover design was employed to analyze the impact of different meteorological factors on the number of scarlet fever cases in Xicheng District, while controlling for long-term trends, seasonality and other confounding factors. Results From 2010 to 2019, a total of 3,195 cases of scarlet fever were reported in Xicheng District, with an average annual incidence rate of 24.17/100 000. The overall trend showed fluctuating decline, during which three incidence peaks occurred, with the highest incidence rate observed in 2011. No severe or fatal cases were reported. The incidence of scarlet fever exhibited a distinct seasonal bimodal distribution, primarily concentrated between April to June and November to January of the following year. The conditional logistic regression results showed that the average relative humidity and average temperature were positively correlated with scarlet fever cases (β=0.0203, β=0.0613, P＜0.001), while the average vapor pressure was negatively correlated with scarlet fever cases (β=-0.1468, P＜0.001). Increases average relative humidity and average temperature were risk factors for scarlet fever incidence (OR=1.0205，95%CI=1.0150 -1.0261；OR=1.0632，95%CI=1.0379 -1.0891). For every 1.00% increase in average relative humidity, the number of scarlet fever cases increased by 2.05% (1.50% –2.61%). Similarly, for every 1^。C rise in average temperature, the number of cases increased by 6.32% (3.79% – 8.91%). In contrast, an increase in average vapor pressure had a protective effect against scarlet fever (OR=0.8635,95%CI=0.8392-0.8885). For every 1 hPa increase in average vapor pressure, the number of scarlet fever cases decreased by 13.65% (11.15%–16.08%). Conclusion The average relative humidity, average temperature and average vapor pressure are the primary meteorological factors influencing the incidence of scarlet fever in Xicheng District of Beijing, and can be utilized as indicators for the prevention, control, surveillance and early warning of scarlet fever.

Objective To compare the epidemic characteristics of seasonal influenza in Xicheng District, Beijing, between 2018-2019 and 2023-2024. Methods The present study was a cross-sectional study. The influenza cases and etiological surveillance data of Xicheng District, Beijing in 2018-2019 and 2023-2024, respectively, were analyzed to study the differences in the incidence rate of influenza cases in different ages, regions, occupations, and etiological detection results during the four years. Results There were significant differences in the incidence rates of influenza (χ²=37 038.65，P＜0.05) and the interval between visits (Z=468.692, P < 0.05) in 2018, 2019, 2023 and 2024. There were statistically significant differences in the incidence rates of influenza among different age groups, streets, and occupations during the four years (Z=75.646, 209.276, 72.132, 361.176, 43.570, all P < 0.05). Compared with 2018-2019, the growth rate of influenza in Xicheng District, Beijing in 2023-2024 was the highest in the 15-24 year-old group, Tianqiao Street, and housework and unemployed people. The difference in the interval between influenza visits among people of different age groups during these 4 years was statistically significant (P < 0.05). The growth rate of the interval between influenza visits in Xicheng District, Beijing in 2023-2024 was the highest in the 15-24 year-old group, while it showed a decrease in the 0-4 year-old group. The etiology in 2018-2019 was mainly H1N1 and H3N2 subtypes, and in 2023-2024 it was mainly H3N2 subtype and influenza B, and the peak values of H1N1, H3N2 subtype and influenza B in 2023-2024 were all higher than those in 2018-2019. Conclusion During the epidemic period, non-medical interventions have changed the transmission mode, seasonal peak and subtype distribution of influenza virus. As the epidemic has eased, the pattern of influenza has gradually rebounded.

Work serves as a critical means of obtaining resources, facilitating personal growth, realizing self-worth, and engaging in social interactions. However, work-related diseases pose significant threats to workers’ health and productivity, and impose considerable economic burdens. This article categorized work-related diseases into six major types, including musculoskeletal disorders, mental and behavioral disorders, cardiovascular and metabolic diseases, digestive system diseases, reproductive system diseases, and non-specific respiratory diseases, and summarized their risk factors, assessment methods, policy regulation, and prevention and control measures. Current research in this field predominantly relies on cross-sectional studies, which present limitations in causal inference and potential risks of bias. Future studies should expand sample sizes, optimize research designs, and establish multidimensional evaluation systems to comprehensively assess the health and economic impacts of work-related diseases. It is recommended to enhance the translation of research findings into practice, thereby providing a scientific basis for the occupational health protection system and promoting the well-being and sustainable development of the working population.

Objective In order to understand the current resistance status of Aedes albopictus(Ae. albopictus) adult population to commonly used insecticides and the resistance dynamics development in Zhejiang Province and provide a theoretical basis for the scientific and rational use of hygienic insecticides. Methods Resistance determination was carried out using the diagnostic dose method(GB/T 26347-2010)recommended by WHO in the adult mosquito contact cylinder method to monitor the resistance of Ae. albopictus field populations in 11 cities and districts in Zhejiang Province in 2024. Results The monitoring result showed that adult Ae. albopictus in 11 areas were resistant or suspected resistant populations to both cis-cypermethrin and permethrin; suspected and resistant populations to the organophosphate insecticide malathion were as high as 81.82%; while suspected resistance to the carbamate insecticide residual carbofuran accounted for 45.45%, and the rest of the monitoring sites were sensitive to it. Conclusions The result suggest that the generalized resistance of Ae. albopictus populations to pyrethroids and organophosphorus insecticides in the field in Zhejiang Province needs to be highly emphasized. In future mosquito vector and mosquito-borne disease control, insecticides should be selected based on the resistance monitoring information, while following scientific guidelines for insecticide use.

Objective To explore the correlation and lag effect between meteorological factors and the incidence of scarlet fever in Xicheng District, Beijing, and to provide a theoretical basis for the surveillance, early warning，and scientific prevention and control of scarlet fever. Methods Based on the daily scarlet fever incidence data and concurrent meteorological data in Xicheng District, Beijing from 2010 to 2019, the distributed lag non-linear model (DLNM) was used to analyze the impact of meteorological factors on the incidence of scarlet fever. Results The risk of scarlet fever was the highest when the daily average temperature was 34.2℃ with a lag of 0 days (RR=1.175, 95% CI:1.006-1.372). The risk was the second highest when the daily average temperature was 2.2℃ with a lag of 12 days (RR=1.123, 95% CI:1.044 -1.209). The cumulative relative risk of scarlet fever was statistically significant when the daily average temperature ranged from 27.2℃ to 34.2℃, with the highest cumulative relative risk at 34.2℃ (RR=1.906, 95%CI:1.215-2.989). When the daily average relative humidity was 19.5% with a lag of 6 days, the risk of scarlet fever incidence was the highest (RR=1.022, 95% CI: 1.005-1.040). The cumulative relative risk was statistically significant when the daily average relative humidity ranged from 24.7% to 40.2%, with the highest cumulative relative risk at 27.3% (RR=1.170, 95% CI: 1.020-1.343). The risk of scarlet fever was the highest when the daily average vapor pressure was 1.2 hPa with a lag of 5 days (RR=1.029, 95%CI:1.008-1.050). The cumulative relative risk of scarlet fever was statistically significant when the daily average vapor pressure was 1.2-7.4 hPa, and the highest cumulative risk was when the daily average vapor pressure was 1.2 hPa (RR=1.362, 95% CI:1.022-1.815). Conclusion There is a nonlinear relationship between meteorological factors and the incidence of scarlet fever in Xicheng District, Beijing, with a certain lag effect. Daily average temperature (27.2-34.2℃), daily average relative humidity (28.6~36.3%) and daily average vapor pressure (1.2-7.4 hPa) increase the risk of scarlet fever. These factors can be used as indicators for the prevention, control, surveillance, and early warning of scarlet fever.

A mounting body of research suggests that circRNAs significantly contribute to the develop-ment of myocardial fibrosis.The microarray results of human circular RNA expression profile indicated that circHERC4_041 expression increased in the myocardium of patients with heart failure,RT-qPCR a-nalysis confirmed that the myocardial expression level of circHERC4_041 in individuals with heart failure were considerably elevated compared to that in healthy organ donors.Fluorescence in situ hybridization(FISH)confirmed that circHERC4_041 was abundant in the cytoplasm of human cardiomyocyte AC16.Overexpression of circHERC4_041 in mouse myocardial fibroblasts(mCFs)mediated by adenovirus in-hibited the expression of fibrosis-related proteins in mCFs.Experiments involving cell proliferation,wound healing,and Transwell assays demonstrated that overexpression of circHERC4_041 suppressed the growth and mobility of mCFs(P＜0.001).Sequence analysis results suggested that circHERC4_041 con-tains potential ribosome entry sequence(IRES)and open reading frame(ORF).Western blot confirmed that circHERC4_041 could translate the 516 amino acid HERC4-516aa protein,which was mainly located in the cytoplasm of the cell.Cell functional experiments confirmed that circHERC4_041 inhibited the fi-brotic phenotype of mCFs by specifically translating HERC4-516aa(P＜0.05).The specific interaction between HERC4-516aa and transglutaminase 2(TGM2)was confirmed by IP-MS screening and Co-IP i-dentification.Further results found that the degradation of TGM2 was promoted through proteasome path-way.The overexpression of TGM2 in mCFs facilitated by adenoviral vectors could counteract the suppres-sive effects of HERC4-516aa on the fibrotic phenotype of mCFs.Therefore,this study confirmed that the HERC4-516aa protein translated by circHERC4_041 can specifically bind to TGM2 to inhibit the fibrotic phenotype of myocardial fibroblasts.

Objective:To understand the incidence of adverse pregnancy outcome in HIV-infected pregnant women and influencing factors in China and provide reference for the improvement of the health status of HIV-infected pregnant women and their newborns.Methods:Based on a mother-child cohort of HIV-infected pregnant women and children (PMTCT-MC-2005) established in Guangxi Zhuang Autonomous Region, Yunnan Province and Xinjiang Uygur Autonomous Region, this study enrolled pregnant women with or without HIV infection as study subjects from January 2017 to June 2023, a total of 1 646 pregnant women (558 HIV-infected and 1 088 HIV-uninfected) were included, and 34 cases with missing data were excluded. The χ2 test was used to analyze the difference in the incidence adverse pregnancy outcome between two groups, and used logistic regression model to identify the influencing factors of adverse pregnancy outcome in HIV-infected pregnant women. Results:A total of 1 612 pregnant women were included in the study, in whom 541 were infected with HIV and 1 071 were not infected with HIV. The incidence of adverse pregnancy outcome was 18.8% (303/1 612), the incidence of adverse pregnancy outcome was 33.1% (179/541) in the HIV-infected pregnant women and 11.6% (124/1 071) in the pregnant women without HIV infection. The results of multivariable logistic regression analysis showed that the influencing factors of adverse pregnancy outcome were age <35 years at delivery (a OR=0.64, 95% CI: 0.43-0.95) compared with the age ≥35 years and the duration of antiviral treatment over 10 years (a OR=0.43, 95% CI: 0.23-0.79) compared with less than one year. Conclusions:The incidence of adverse pregnancy outcome in HIV-infected pregnant women was high in some regions of China during 2017-2023. It is necessary for HIV-infected women to get pregnancy at appropriate time based on antiretroviral treatment effect and strengthen self-care to reduce the incidence of adverse pregnancy outcome.

Objective:To evaluate the predictive role of ultrasound, genetic testing, and clinical features in the malignancy risk of Bethesda Ⅲ thyroid nodules, and to explore strategies for optimizing treatment decisions.Methods:This retrospective study included 227 Bethesda Ⅲ thyroid nodules from patients who underwent surgical treatment at the Thyroid Surgery Department of Nanjing Drum Tower Hospital between Jan. 2020 and Dec. 2023. All patients underwent ultrasound evaluation and fine-needle aspiration. For nodules diagnosed as ultrasound, genetic testing, and clinical features were analyzed using univariate and multivariate regression to assess their association with malignancy.Results:Among the 227 nodules, 214 were malignant, resulting in a malignancy rate of 94.2%. The malignancy rate of thyroid nodules was 94.2%. In univariate analysis, age ( P=0.016), BRAF V600E gene mutation ( P<0.001), nodule size ( P=0.002), and TIRADS ( P<0.001) were significantly associated with malignancy in Bethesda Ⅲ thyroid nodules. Multivariate analysis confirmed that age ( OR=0.939, P=0.049) and BRAF V600E gene mutation ( OR=24.641, P<0.001) were significantly associated with thyroid nodule nature and served as independent predictive factors for malignancy. Conclusions:Genetic testing is an important method for predicting the malignancy of Bethesda Ⅲ thyroid nodules, and ultrasound also has high clinical value in assessing the malignancy risk of nodules. While some clinical features are highly correlated with nodule characteristics, they may not be practical in clinical application. For nodules classified as TIRADS 3 through ultrasound evaluation and negative for BRAF mutations, continued observation may be considered, whereas TIRADS 5 nodules or nodules with BRAF mutations should be prioritized for surgical treatment.