Objective To analyze the occurrence and risk factors of needlestick and sharps injuries(NSIs)among oral health care workers(HCWs).Methods NSIs reported by West China Hospital of Stomatology from 2020 to 2023 were collected,and factors relevant to NSIs were analyzed.Results A total of 391 cases of NSIs were repor-ted.Only one case of injury was caused by a sterile device,while the remaining 390 cases were caused by contamina-ted devices.There were 85,107,113,and 86 cases in 2020,2021,2022,and 2023,respectively.Most NSIs oc-curred among interns(n=235,60.1％).294 cases(75.2％)of NSIs occurred among HCWs who had less than 3 years of clinical experience.The distribution of NSIs among 235 interns in different months showed that NSIs ac-counted for a relatively high proportion from April to June and July to September,and the difference was statistica-lly significant(P＜0.05).The ventral side of the left thumb was the most common site of NSIs(n=53,13.6％),followed by the ventral side of the right index finger(n=45,11.5％)and the ventral side of the left index finger(n=44,11.3％).The most common devices involved in NSIs were various types of syringe needles(n=84,21.5％),followed by various types of dental burs(n=76,19.4％)and suture needles(n=49,12.5％).Injuries mainly oc-curred during the treatment process(n=212,54.2％)and in the department of endodontics(n=86,22.0％).This study didn't find any occupational bloodborne infection case caused by NSIs.Conclusion NSIs mainly occur among inexperienced oral interns,and devices causing NSIs are related to the treatment process.

Body weight abnormalities, including overweight, obesity, and underweight, have become a dual public health challenge in Chinese adults: overweight and obesity lead to a variety of chronic complications, while underweight increases the risks of malnutrition, sarcopenia, and organ dysfunction. To systematically address these issues, multidisciplinary experts in endocrinology, sports science, nutrition, and psychiatry from various regions have held multiple weight management seminars. Based on the latest epidemiological data and clinical evidence, they expanded the guideline to include assessment and intervention strategies for underweight, in addition to the core content of obesity management. This guideline outlines the etiological mechanisms, evaluation methods, and multidimensional management strategies for overweight and obesity, covering key areas such as diagnosis and assessment, medical nutrition therapy, exercise prescription, pharmacological intervention, and psychological support. It is intended to provide a scientific and standardized approach to weight management across the adult population, aiming to curb the rising prevalence of obesity, mitigate complications associated with abnormal body weight, and improve nutritional status and overall quality of life.

Standardised emergency management protocols for hand injury in microsurgery is critical, as it directly determines ultimate clinical outcomes. This consensus consolidates expert insights regarding diagnostic and treatment procedure for hand injury in microsurgery, emergency support protocols and key points of emergency workflow optimisation. It summarises the opinions of experts and puts forward standardised recommendations to guide clinical practice in microsurgical treatment process, so as to further improve the quality of treatment for hand injury in microsurgery and maximise the protection of limb function and quality of life of patients.

Background Workers in the cable manufacturing industry are exposed to high-speed machinery and equipment for a long time, coupled with heavy workload, which poses significant risks to their physical health. However, the issue of occupational injuries in this industry has not received enough attention yet. Objective To understand the incidence of occupational injury of workers in cable manufacturing industry and to analyze the influencing factors. Method A basic information questionnaire and an occupational injury questionnaire were developed to investigate the occupational injuries of 1 343 workers in a cable manufacturing enterprise in the past year, and a total of 1 225 valid questionnaires were recovered, with an effective rate of 91.2%. Descriptive statistics were used to characterize the causes, injury locations, injury types, and other characteristics of employees’ occupational injuries. Chi-square test was used to analyze the occupational injury status of groups with different demographic characteristics, occupational characteristics, lifestyles, and interpersonal relationships. Logistic regression was used to analyze the influencing factors of occupational injuries. Result The incidence of occupational injuries among workers in a cable manufacturing enterprise in the past year was 8.6%, which mainly happened in male workers (80.0%) and occurred from May to July in summer (45.7%). The main causes were mechanical injuries (32.4%) and object blows (27.6%). The main sources of damage were machinery and equipment (36.2%) as well as raw materials and products (15.2%). The main injuries were located in upper limbs (53.3%) and lower limbs (22.9%). The main types of injuries were fractures (33.3%) and abrasions/contusions/puncture wounds (19.0%). The results of univariate analysis showed that there were statistically significant variations in the incidence of occupational injuries by gender, overtime, pre-job training, years of service in current position, alcohol consumption, physical exercise per week, and co-worker relationship (P<0.05). The logistic regression model showed that workers who exercised less than twice a week, did not participate in pre-job training, worked overtime, and had fair/poor/very poor colleague relationship had a higher risk of occupational injury, while women had a lower risk of occupational injury. Conclusion The distribution of occupational injury population is mainly male, and the time distribution is mainly from May to July. Gender, physical exercise, pre-job training, overtime, and colleague relationship are the influencing factors of occupational injuries. We should strengthen pre-job training, arrange work hours reasonably, and create a good working atmosphere to reduce the occurrence of occupational injuries.

Background Social psychological factors have emerged as a key area of research in occupational injury prevention. Occupational stress, a significant component of social psychology, has garnered widespread attention due to its potential impact on occupational injury. Objective To analyze the factors influencing occupational stress among cable manufacturing workers and explore the relationship between occupational stress and occupational injury, and to provide scientific evidence for reducing occupational stress and injury. Methods A questionnaire on basic demographics, occupational injury, and occupational stress (Effort-Reward Imbalance, ERI) was used to investigate 1343 workers in a cable enterprise. Chi-square test was employed to analyze the distribution of occupational stress across different worker characteristics. Logistic regression was used to identify factors influencing occupational stress, and a decision tree model was applied to assess the impact of occupational stress on injury risk. Results A total of 1225 valid questionnaires were collected, yielding a response rate of 91.2%. The positive rate of occupational stress was 28.7%, while the incidence of occupational injury in the past year was 8.6%. The results of univariate analysis revealed that workers who had experienced occupational injuries had a higher positive rate of occupational stress compared to those without injuries (P<0.05), and there were significant differences in the distribution of occupational stress by genders, overtime work, shift work, daily working hours, fatigue levels, sleep duration, family relationships, and colleague relationships (P<0.05). The logistic regression results showed that individuals who worked shifts, had fair/poor/very colleague relationships, and frequently worked overtime had a higher risk of occupational stress (P<0.05). The final decision tree model confirmed that occupational stress was a risk factor for occupational injury. Additional factors influencing occupational injury included physical exercise, colleague relationships, pre-job training participation, and gender. Workers who exercised less than twice per week and experienced occupational stress had a significantly higher risk of injury (23.6%) compared to those without occupational stress (10.9%). Conclusion Shift work, colleague relationships, and overtime work are correlated with the positive rate of occupational stress among cable manufacturing workers. Implementing a reasonable work schedule and fostering a positive work environment are recommended. Reducing occupational stress may help lower the risk of occupational injuries in this industry.

Background Diseases severely affect the efficiency of workers. Comorbidity refers to the coexistence of two or more chronic diseases or health problems in the same individual. Previous studies have primarily focused on occupational injuries caused by environmental exposures, while the analysis of the epidemiological characteristics of self-reported diseases and occupational injuries among manufacturing workers has been insufficient. Objective To analyze the distribution of self-reported diseases and occupational injuries among manufacturing workers, the strength of correlation between different diseases, and common disease combinations, and to preliminarily explore the relationship between self-reported diseases and occupational injuries. Methods A cross-sectional survey was conducted to investigate the occupational injuries of 2382 workers in 2 manufacturing enterprises over the past year, and 2355 questionnaires were valid after cleaning. The questionnaire included three parts: basic information, occupational injury occurrence, and disease prevalence. The self-reported diseases diagnosed by physicians included musculoskeletal diseases, cardiovascular diseases, respiratory diseases, mental health problems, neurological and sensory organ diseases, digestive organ diseases, reproductive and urinary organ diseases, skin diseases, tumors, endocrine and metabolic system diseases, blood diseases and birth defects, a total of 11 types. Log-binomial model was used to calculate the prevalence ratio (PR) value of the association between different diseases, and UpSet diagram was used to present the disease combination pattern. Results In total, 40.2% (946/2355) of the study participants reported at least one disease, while 8.6% (203/2355), 5.2% (122/2355), and 5.9% (140/2355) reported having two, three, and four or more diseases, respectively. A higher prevalence was observed for musculoskeletal diseases, neurological and sensory organ diseases, digestive organ diseases, and skin diseases, which accounted for 18.0% (423/2355), 13.8% (324/2355), 9.3% (218/2355), and 9.1% (214/2355), respectively. Workers with musculoskeletal disorders, cardiovascular diseases, or neurological and sensory organ diseases reported significantly higher incidence of occupational injuries compared with workers without the corresponding diseases (P<0.001, P=0.041, and P=0.006, respectively). Musculoskeletal diseases were strongly associated with comorbidities of neurological and sensory organ diseases (PR values were 1.86 and 1.98, respectively), and the other patters were musculoskeletal diseases and digestive organ diseases (PR and OR values were 1.57 and 2.35, respectively), and musculoskeletal diseases and cardiovascular diseases (PR and OR values were 1.46 and 2.22, respectively). The largest binomial comorbidity group involved musculoskeletal diseases and neurological and sensory organ diseases, accounting for 5.4% (25/465) of the comorbid workers. Conclusion Among the self-reported diseases of manufacturing workers, musculoskeletal diseases, neurological and sensory organ diseases, digestive organ diseases, and skin diseases are more common. Musculoskeletal diseases and neurological and sensory organ diseases are the most common in all comorbidities. Musculoskeletal diseases, cardiovascular diseases, and neurological and sensory organ diseases are associated with occupational injuries. In the prevention and control of occupational injuries, joint prevention strategies targeting multiple diseases should be strengthened.

Objective: To investigate the characteristics and trend of stroke incidence in Yixing City, Jiangsu Province from 2016 to 2023, so as to provide the reference for formulating prevention and control strategies of stroke. Methods: Data of stroke case in Yixing City from 2016 to 2023 were collected from the National Health Information Platform of Yixing City, including sex, age, time of onset, and diagnostic subtypes. Crude incidence was standardized using the data from the 2010 Chinese National Population Census to analyze the characteristics of stroke incidence. The incidence trend of stroke was analyzed by average annual percent change (AAPC). Results: A total of 54 157 stroke cases were reported in Yixing City from 2016 to 2023, with a crude incidence of 629.52/100 000 and a standardized incidence of 299.50/100 000, showing an upward trend (AAPC=9.744% and 5.955%, both P<0.05). The crude and standardized incidence of stroke in males were significantly higher than those in females (695.30/100 000 vs. 565.79/100 000, 328.73/100 000 vs. 270.71/100 000, both P<0.05). Stroke incidence exhibited an age-dependent increase (P<0.05), peaking in the ≥60 years age group (1 820.43/100 000). The crude and standardized incidence of ischemic stroke (555.46/100 000 and 262.26/100 000) were significantly higher than those of hemorrhagic stroke (52.80/100 000 and 28.03/100 000, both P<0.05). From 2016 to 2023, the standardized incidences of stroke in males, females, the 0-<40 years age group, the 40-<60 years age group, the ≥60 years age group, and ischemic stroke all showed an upward trend (AAPC=6.692%, 4.925%, 5.607%, 5.777%, 5.698%, and 8.481%, respectively, all P<0.05). No significant temporal trend was observed for hemorrhagic stroke incidence (P>0.05). Conclusions The incidence of stroke among residents in Yixing City showed an upward trend from 2016 to 2023, with males and elderly individuals being high-risk populations. Ischemic stroke emerged as the predominant subtype, while a concerning trend of increasing stroke incidence among younger adults was observed.

Body weight abnormalities, including overweight, obesity, and underweight, have become a dual public health challenge in Chinese adults: overweight and obesity lead to a variety of chronic complications, while underweight increases the risks of malnutrition, sarcopenia, and organ dysfunction. To systematically address these issues, multidisciplinary experts in endocrinology, sports science, nutrition, and psychiatry from various regions have held multiple weight management seminars. Based on the latest epidemiological data and clinical evidence, they expanded the guideline to include assessment and intervention strategies for underweight, in addition to the core content of obesity management. This guideline outlines the etiological mechanisms, evaluation methods, and multidimensional management strategies for overweight and obesity, covering key areas such as diagnosis and assessment, medical nutrition therapy, exercise prescription, pharmacological intervention, and psychological support. It is intended to provide a scientific and standardized approach to weight management across the adult population, aiming to curb the rising prevalence of obesity, mitigate complications associated with abnormal body weight, and improve nutritional status and overall quality of life.

Objective:To investigate the dynamic characteristics of human papillomavirus (HPV) genomic integration during cervical lesion progression and the clinical value of HPV integration detection in stratify HPV-positive women, and to explore its molecular mechanisms in cervical carcinogenesis.Methods:A prospective cohort study was designed to enroll high-risk HPV (HR-HPV) positive women who underwent cervical cancer screening in Drum Tower Hospital Affiliated to Nanjing University Medical School and Nanjing Maternity and Child Health Care Hospital from July 2022 to July 2024. Cervical exfoliated cells samples were collected, and HPV whole genome targeted capture and high-throughput sequencing technology were used. The HPV integration patterns, host gene functional region distribution and pathway enrichment characteristics of 157 samples with different cervical lesions grades were analyzed, including 31 cases of normal cervix, 40 cases of cervical intraepithelial neoplasia (CIN) Ⅰ, 32 cases of CIN Ⅱ, 42 cases of CIN Ⅲ, and 12 cases of cervical cancer.Results:HR-HPV integration was detected in 80.2% (126/157) of the 157 HR-HPV positive samples. The incidence of HR-HPV integration in cervical cancer patients was 12/12, which was higher than that in normal women (77%, 24/31). The incidence of HPV16 integration was significantly higher in high-grade lesions, and the incidence of HPV16 integration was 43% (18/42) in CIN Ⅲ patients and 8/12 in cervical cancer patients ( P<0.001). A total of 14 438 integration events were detected in 126 samples with HPV integration. The integration sites were mainly distributed in the host intergenic region (51.0%, 7 359/14 438) and intronic region (38.1%, 5 494/14 438), and the integration frequency of viral L1 gene was the highest (28.4%, 4 498/16 781). Functional enrichment analysis showed that HPV integration-related host genes were significantly enriched in transport of small molecules,cyclic guanosine monophosphate (cGMP)-protein kinase G (PKG) signaling pathway, and purine ribonucleotide biosynthetic process, which synergistically drove carcinogenesis through multiple mechanisms. Conclusions:HPV integration events are significantly associated with the progression of cervical lesions. HPV integrated detection based on cervical exfoliated cells is expected to optimize the current screening strategy, reduce excessive intervention of HPV positive women and facilitate their accurate triage management.

Standardised emergency management protocols for hand injury in microsurgery is critical, as it directly determines ultimate clinical outcomes. This consensus consolidates expert insights regarding diagnostic and treatment procedure for hand injury in microsurgery, emergency support protocols and key points of emergency workflow optimisation. It summarises the opinions of experts and puts forward standardised recommendations to guide clinical practice in microsurgical treatment process, so as to further improve the quality of treatment for hand injury in microsurgery and maximise the protection of limb function and quality of life of patients.