BACKGROUND:Upper lumbar spinal stenosis is a multifactorial degenerative disorder of the spine.For narrowing of the spinal canal in the upper lumbar region(L1-L4),surgical decision-making is particularly complex.Existing minimally invasive surgeries each have their own advantages and limitations.Currently,there are few reports on biomechanical comparison and finite element analysis of different surgical methods for the treatment of high lumbar spinal stenosis.OBJECTIVE:To analyze the biomechanical impact of endoscopic unilateral laminotomy for bilateral decompression,transforaminal endoscopic lumbar decompression,and cross-overtop decompression in the treatment of upper lumbar spinal stenosis using endoscopy,and to verify the reliability and effectiveness of these three surgical techniques in treating upper lumbar spinal stenosis,providing a biomechanical basis for clinical decision-making.METHODS:The CT images of the lumbar spine of a healthy volunteer were selected,and the finite element model M0 of the normal lumbar L1-L5 segments was established using Mimics,Geomagic,Solid works,and Ansys software.The L2-L3 segment,representing upper lumbar characteristics,was chosen.Based on this model,the surgical models for endoscopic unilateral laminotomy for bilateral decompression(M1),transforaminal endoscopic lumbar decompression(M2),and cross-overtop decompression(M3)were established.Using software,the changes in the range of motion of the entire lumbar segment and the maximum Von Mises stress of the intervertebral discs were simulated and evaluated for each group of models under six loading conditions:flexion,extension,left lateral bending,right lateral bending,left rotation,and right rotation.RESULTS AND CONCLUSION:(1)Compared with model MO,the range of motion in M1,M2,and M3 increased under all six conditions,with M1 showing a greater increase.(2)M1 and M2 demonstrated significant increases in range of motion under forward bending,extension,and right rotation,while the increase under other conditions remained below 7％.(3)Compared with model M3,model M1 exhibited slightly increased overall joint range of motion during extension and left bending,while no significant changes were observed in other aspects,and the L1-L5 lumbar segments did not reach an unstable state.(4)In model M1,the maximum Von Mises stress of the intervertebral discs increased most significantly under flexion and extension loading conditions.However,under left lateral bending,right lateral bending,left rotation,and right rotation loading conditions,the increase did not exceed 5％.(5)These findings suggest that due to the sagittal anatomical characteristics of the facet joints,the unilateral laminotomy for bilateral decompression technique,while decompressing,involves resection of more facet joints,which impacts overall segmental stability.The transforaminal endoscopic lumbar decompression technique is suitable for patients with foraminal stenosis but cannot achieve complete decompression for those with severe ventral central stenosis.The Cross-Overtop technique effectively enlarges the volume of the central canal and lateral recess,optimizing decompression,and shows unique advantages in treating upper lumbar spinal stenosis.

BACKGROUND:Upper lumbar spinal stenosis is a multifactorial degenerative disorder of the spine.For narrowing of the spinal canal in the upper lumbar region(L1-L4),surgical decision-making is particularly complex.Existing minimally invasive surgeries each have their own advantages and limitations.Currently,there are few reports on biomechanical comparison and finite element analysis of different surgical methods for the treatment of high lumbar spinal stenosis.OBJECTIVE:To analyze the biomechanical impact of endoscopic unilateral laminotomy for bilateral decompression,transforaminal endoscopic lumbar decompression,and cross-overtop decompression in the treatment of upper lumbar spinal stenosis using endoscopy,and to verify the reliability and effectiveness of these three surgical techniques in treating upper lumbar spinal stenosis,providing a biomechanical basis for clinical decision-making.METHODS:The CT images of the lumbar spine of a healthy volunteer were selected,and the finite element model M0 of the normal lumbar L1-L5 segments was established using Mimics,Geomagic,Solid works,and Ansys software.The L2-L3 segment,representing upper lumbar characteristics,was chosen.Based on this model,the surgical models for endoscopic unilateral laminotomy for bilateral decompression(M1),transforaminal endoscopic lumbar decompression(M2),and cross-overtop decompression(M3)were established.Using software,the changes in the range of motion of the entire lumbar segment and the maximum Von Mises stress of the intervertebral discs were simulated and evaluated for each group of models under six loading conditions:flexion,extension,left lateral bending,right lateral bending,left rotation,and right rotation.RESULTS AND CONCLUSION:(1)Compared with model MO,the range of motion in M1,M2,and M3 increased under all six conditions,with M1 showing a greater increase.(2)M1 and M2 demonstrated significant increases in range of motion under forward bending,extension,and right rotation,while the increase under other conditions remained below 7％.(3)Compared with model M3,model M1 exhibited slightly increased overall joint range of motion during extension and left bending,while no significant changes were observed in other aspects,and the L1-L5 lumbar segments did not reach an unstable state.(4)In model M1,the maximum Von Mises stress of the intervertebral discs increased most significantly under flexion and extension loading conditions.However,under left lateral bending,right lateral bending,left rotation,and right rotation loading conditions,the increase did not exceed 5％.(5)These findings suggest that due to the sagittal anatomical characteristics of the facet joints,the unilateral laminotomy for bilateral decompression technique,while decompressing,involves resection of more facet joints,which impacts overall segmental stability.The transforaminal endoscopic lumbar decompression technique is suitable for patients with foraminal stenosis but cannot achieve complete decompression for those with severe ventral central stenosis.The Cross-Overtop technique effectively enlarges the volume of the central canal and lateral recess,optimizing decompression,and shows unique advantages in treating upper lumbar spinal stenosis.

Objective To compare the long-term survival of elderly patients with esophageal squamous cell carcinoma (ESCC) treated with surgical versus non-surgical treatment. Methods A retrospective analysis was conducted on the clinical data of elderly patients aged ≥70 years with ESCC who underwent esophagectomy or radiotherapy/chemotherapy at Sichuan Cancer Hospital from January 2009 to September 2017. Patients were divided into a surgical group (S group) and a non-surgical group (NS group) according to the treatment method. The propensity score matching method was used to match the two groups of patients at a ratio of 1∶1, and the survival of the two groups before and after matching was analyzed. Results A total of 726 elderly patients with ESCC were included, including 552 males and 174 females, with 651 patients aged ≥70-80 years and 75 patients aged ≥80-90 years. There were 515 patients in the S group and 211 patients in the NS group. The median follow-up time was 60.8 months, and the median overall survival of the S group was 41.9 months [95%CI (35.2, 48.5)], while that of the NS group was only 24.0 months [95%CI (19.8, 28.3)]. The 1-, 3-, and 5-year overall survival rates of the S group were 84%, 54%, and 40%, respectively, while those of the NS group were 72%, 40%, and 30%, respectively [HR=0.689, 95%CI (0.559, 0.849), P<0.001]. After matching, 138 patients were included in each group, and there was no statistical difference in the overall survival between the two groups [HR=0.871, 95%CI (0.649, 1.167), P=0.352]. Conclusion Compared with conservative treatment, there is no significant difference in the long-term survival of elderly patients aged ≥70 years who undergo esophagectomy for ESCC. Neoadjuvant therapy combined with surgery is still an important choice to potentially improve the survival of elderly patients with ESCC.

The European Association for Cardio-Thoracic Surgery (EACTS) has recently updated and published the "2024 EACTS guidelines on perioperative medication in adult cardiac surgery". Based on the latest evidence, the guidelines have been updated in multiple aspects including underlying disease management, antithrombotic medication, arrhythmia treatment and other supportive care, etc. This paper aims to summarize and interpret the guidelines, in order to promote clinicians’ understanding and optimize perioperative medical treatment in adult cardiac surgery.

Under the background of carbon peaking and carbon neutrality goals, the Ministry of Ecology and Environment, together with 15 national ministries and commissions, has formulated the Implementation Plan on Establishing a Carbon Footprint Management System, and it is urgent for traditional Chinese medicine(TCM) pharmaceutical enterprises to carry out research on carbon footprint accounting methods of related products. Based on the life cycle assessment(LCA) theory, taking mulberry leaf extract produced by a certain enterprise as an example, this study analyzed the carbon footprint of TCM extracts during the life cycle. The results show that for every 1 kg of product produced, the carbon emissions from the stages of raw material acquisition, transportation, and extract production are-20.569, 1.205, and 173.577 kgCO_2eq(CO_2 equivalent), respectively. The carbon footprint of the product is 154.213 kgCO_2eq·kg~(-1). In addition, the carbon emission is the highest in the production stage, in which the consumption of ethanol solvents makes the greatest contribution to the carbon footprint, accounting for 25.71%, more than one-fourth of the total carbon footprint. The second contribution was from the treatment process of TCM residues, accounting for 19.67%, closely followed by wastewater treatment(17.71%), the consumption of hot steam(17.43%), and drinking water(16.90%). The consumption of electric power and packaging materials has a smaller carbon emission of 2.58%. In particular, the carbon emission caused by the consumption of packaging materials is only 0.04%, which is negligible. The results of the study are expected to provide a reference for TCM enterprises to carry out research on the carbon footprint of products, offer ideas for collaborative innovation in reducing pollution and carbon emissions throughout the entire industry chain of TCM, and develop new quality productivity of modern TCM industry based on green and low-carbon manufacturing.
Morus/chemistry* ; Plant Leaves/chemistry* ; Carbon Footprint ; Drugs, Chinese Herbal/chemistry* ; Plant Extracts/analysis* ; Medicine, Chinese Traditional

Qualitative and quantitative analysis methods for chemical components of different processed products of Corni Fructus were established to systematically characterize and identify these components, and the content of the main differential components was determined. The chemical components of different processed products of Corni Fructus were collected using ultra-high performance liquid chromatography-quadrupole time-of-flight tandem mass spectrometry(UPLC-Q-TOF-MS). Through analysis of self-built databases, literature, and reference standards, a total of 93 components were obtained, including 19 iridoids, 15 flavonoids, 16 organic acids, eight triterpenoids, eight tannins, four amino acids, two polysaccharides, five olefins, and 16 other compounds. Additionally, by using multivariate statistical methods, the differential components between different processed products of Corni Fructus were screened under the conditions of VIP>1.0 and FC<0.5 or FC>2.0 and P<0.05. The PCA and OPLS-DA results showed differences in the chemical components between different processed products of Corni Fructus. A total of 21 differential components were screened, including tartaric acid, morroniside, and rutin. On this basis, ultra-high performance liquid chromatography-triple quadrupole tandem mass spectrometry(UPLC-QqQ-MS/MS) was used to determine the content of 10 main common differential components, including gallic acid, morroniside, ursolic acid, loganin, swertiamarin, rutin, 5-hydroxymethylfurfural, cornuside Ⅰ, quercetin, and oleanolic acid. The above 10 components showed a good linear relationship within the determined concentration range, with the precision, stability, repeatability, and sample recovery rate all meeting the requirements. Compared with that in Corni Fructus, the content of iridoid glycosides in wine-prepared Corni Fructus and wine-and honey-prepared Corni Fructus decreased, while the content of gallic acid, rutin, quercetin, 5-hydroxymethylfurfural, ursolic acid, and oleanolic acid increased. Compared with wine-prepared Corni Fructus, wine-and honey-prepared Corni Fructus showed varying degrees of increase in all other components, except for a slight decrease in gallic acid content. In summary, this study clarified the influence of different processing methods on the chemical components of Corni Fructus, providing a theoretical basis for the scientific connotation, overall quality evaluation, and clinically rational application of Corni Fructus processing in the future.
Tandem Mass Spectrometry/methods* ; Chromatography, High Pressure Liquid/methods* ; Cornus/chemistry* ; Drugs, Chinese Herbal/chemistry* ; Fruit/chemistry*

Macroporous resin adsorption column chromatography, silica gel column chromatography, ODS column chromatography, and semi-preparative high-performance liquid chromatography, combined with analytical methods such as NMR and MS, were employed to separate and identify compounds from the 70% ethanol extract of Ajania purpurea. A total of 30 compounds were isolated and identified, including 13 phenolic acids, 7 coumarins, 2 lignans, 1 flavonoid, 2 sesquiterpenes, 1 steroid, and 4 others. Among them, compounds 1 and 2 were newly discovered compounds, and compounds 4, 6, 8, 12, 14-23, 25, 28, and 30 were isolated from Ajania plants for the first time. Bioactivity screening showed that multiple compounds significantly inhibited the production of nitric oxide in lipopolysaccharide-stimulated RAW264.7 cells in a dose-dependent manner. Furthermore, compound 2 elevated the levels of glutathione in LPS-induced BEAS-2B cells, reduced the expression of pro-inflammatory cytokines such as tumor necrosis factor(TNF)-α, interleukin(IL)-6, and IL-1β, enhanced the mRNA of GPX4, HMOX1, NFE2L2, and enhanced protein levels of GPX4, HO-1, Nrf2, and SLC7A11, demonstrating potential anti-ferroptotic effect.
Mice ; Animals ; Lignans/isolation & purification* ; RAW 264.7 Cells ; Humans ; Nitric Oxide ; Tumor Necrosis Factor-alpha/immunology* ; Drugs, Chinese Herbal/isolation & purification* ; NF-E2-Related Factor 2/metabolism* ; Macrophages/metabolism* ; Interleukin-6/immunology*

Traditional Chinese medicine(TCM) decoction pieces are a core carrier for the inheritance and innovation of TCM, and their quality and safety are critical to public health and the sustainable development of the industry. Conventional quality control models, while having established a well-developed system through long-term practice, still face challenges such as relatively long inspection cycles, insufficient objectivity in characterizing complex traits, and urgent needs for improving the efficiency of integrating multidimensional quality information when confronted with the dual demands of large-scale production and precision quality control. With the rapid development of artificial intelligence, machine learning can deeply analyze multidimensional data of the morphology, spectroscopy, and chemical fingerprints of decoction pieces by constructing high-dimensional feature space analysis models, significantly improving the standardization level and decision-making efficiency of quality evaluation. This article reviews the research progress in the application of machine learning in the processing, production, and rapid quality evaluation of TCM decoction pieces. It further analyzes current challenges in technological implementation and proposes potential solutions, offering theoretical and technical references to advance the digital and intelligent transformation of the industry.
Machine Learning ; Drugs, Chinese Herbal/standards* ; Quality Control ; Medicine, Chinese Traditional/standards* ; Humans

OBJECTIVE: Cancer remains a significant global health challenge, necessitating the development of effective treatment approaches. Developing synergistic therapy can provide a highly promising strategy for anti-cancer treatment through combining the benefits of various mechanisms. METHODS: In this study, we developed a synergistic strategy for chemo-photothermal therapy by constructing nanocomposites using gold nanorods (GNRs) and tetrahedral framework nucleic acids (tFNA) loaded with the anti-tumor drug doxorubicin (DOX). RESULTS: Our in vitro studies have systematically clarified the anti-cancer behaviors of tFNA-DOX@GNR nanocomposites, characterized by their enhanced cellular uptake and proficient lysosomal escape capabilities. It was found that the key role of tFNA-DOX@GNR nanocomposites in tumor ablation is primarily due to their capacity to induce cytotoxicity in tumor cells via a photothermal effect, which generates instantaneous high temperatures. This mechanism introduces various responses in tumor cells, facilitated by the thermal effect and the integrated chemotherapeutic action of DOX. These reactions include the induction of endoplasmic reticulum stress, characterized by elevated reactive oxygen species levels, the promotion of apoptotic cell death, and the suppression of tumor cell proliferation. CONCLUSION This work exhibits the potential of synergistic therapy utilizing nanocomposites for cancer treatment and offers a promising avenue for future therapeutic strategies.
Doxorubicin/chemistry* ; Gold/chemistry* ; Nanotubes/chemistry* ; Humans ; Nanocomposites/chemistry* ; Cell Line, Tumor ; Nucleic Acids/chemistry* ; Antibiotics, Antineoplastic/pharmacology* ; Antineoplastic Agents/administration & dosage*

Objective To evaluate the value of pre-ascent 6-minute walking test performed at a high altitude in predicting the incidence of acute mountain sickness(AMS)induced by rapid ascent to a very high altitude.Methods After baseline information was collected,participants completed the 6-minute walking test at a high altitude of 2 900 m.Then,they rapidly ascended to a very high altitude of 5 000 m.The Lake Louise score was recorded to assess AMS.Results The AMS group showed a shorter pre-ascent 6-minute walking distance(6MWD)at the high altitude than the non-AMS group[480.00(450.00,521.75)m vs.546.00(516.50,568.50)m,P=0.006].No difference was observed regarding the pre-ascent heart rate or peripheral oxygen saturation(both P>0.05).The pre-ascent 6MWD at the high altitude was negatively correlated with the Lake Louise score assessed after rapid ascent to the very high altitude(r=-0.497,P=0.012).Logistic regression analysis confirmed that the pre-ascent 6MWD at the high altitude was associated with the risk of AMS induced by rapid ascent to the very high altitude(OR=0.971,95% CI=0.947-0.996,P=0.022).The results indicated that the pre-ascent 6MWD demonstrated ideal prediction performance(area under receiver operating characteristic curve=0.846,P=0.006).Conclusion The pre-ascent 6MWD recorded at the high altitude is a convenient and reliable predictor of the AMS induced by rapid ascent to the very high altitude.
Humans ; Altitude Sickness/diagnosis* ; Male ; Adult ; Female ; Young Adult ; Middle Aged ; Acute Disease ; Walk Test ; Walking ; Altitude ; Exercise Test