ObjectiveTo establish the multi-technique characteristic profiles of Alumen by X-ray diffraction（XRD）， Fourier-transform infrared spectroscopy（FTIR） and thermogravimetric-differential thermal analysis（TG-DTA）， and to explore the spectral characteristics for rapid identification of Alumen and its potential adulterant， Ammonium alum. MethodsA total of 27 batches of Alumen samples from 8 production regions were collected for preliminary identification based on visual characteristics. The PDF standard cards of XRD were used to differentiate Alumen from A. alum， and the XRD characteristic profiles of Alumen were established， and then the common peaks were screened. Based on hierarchical clustering analysis（HCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA）， the characteristic information that could be used for identification of Alumen was selected with variable importance in the projection（VIP） value>1. FTIR characteristic profiles of Alumen were established， and key wavenumbers for identification were screened by HCA and OPLS-DA with VIP value>1. Meanwhile， the thermogravimetric differences between Alumen and A. alum were analyzed by TG-DTA， and the thermogravimetric traits that could be used for identification were screened. ResultsAlumen and A. alum could not be effectively distinguished by traits alone. However， by comparing the PDF standard cards of XRD， 15 batches of Alumen and 12 batches of A. alum could be distinguished. In the XRD profiles， 10 characteristic peaks were confirmed， corresponding to diffraction angles of 14.560°， 24.316°， 12.620°， 32.122°， 17.898°， 34.642°， 27.496°， 46.048°， 40.697° and 21.973°. In the FTIR profiles， 4 wavenumber ranges（399.193-403.050， 1 186.010-1 471.420， 1 801.190-2 620.790， 3 612.020-3 997.710 cm^-1） and 12 characteristic wavenumbers（1 428.994， 1 430.922， 1 432.851， 1 434.779， 1 436.708， 1 438.636， 1 440.565， 1 442.493， 1 444.422， 1 446.350， 1 448.279， 1 450.207 cm^-1） were identified. In the TG-DTA profiles， there were characteristic decomposition peaks of ammonium ion and mass reduction features near 555.34 ℃ for A. alum. These characteristics could serve as important criteria for distinguishing the authenticity of Alumen. ConclusionXRD， FTIR and TG-DTA can be used to rapidly detect Alumen and A. alum， and combined with the discriminant features selected through chemometrics， the rapid and accurate identification of Alumen and A. alum can be achieved. The research findings provide new approaches for the rapid identification of Alumen.

ObjectiveTo establish the multi-technique characteristic profiles of Alumen by X-ray diffraction（XRD）， Fourier-transform infrared spectroscopy（FTIR） and thermogravimetric-differential thermal analysis（TG-DTA）， and to explore the spectral characteristics for rapid identification of Alumen and its potential adulterant， Ammonium alum. MethodsA total of 27 batches of Alumen samples from 8 production regions were collected for preliminary identification based on visual characteristics. The PDF standard cards of XRD were used to differentiate Alumen from A. alum， and the XRD characteristic profiles of Alumen were established， and then the common peaks were screened. Based on hierarchical clustering analysis（HCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA）， the characteristic information that could be used for identification of Alumen was selected with variable importance in the projection（VIP） value>1. FTIR characteristic profiles of Alumen were established， and key wavenumbers for identification were screened by HCA and OPLS-DA with VIP value>1. Meanwhile， the thermogravimetric differences between Alumen and A. alum were analyzed by TG-DTA， and the thermogravimetric traits that could be used for identification were screened. ResultsAlumen and A. alum could not be effectively distinguished by traits alone. However， by comparing the PDF standard cards of XRD， 15 batches of Alumen and 12 batches of A. alum could be distinguished. In the XRD profiles， 10 characteristic peaks were confirmed， corresponding to diffraction angles of 14.560°， 24.316°， 12.620°， 32.122°， 17.898°， 34.642°， 27.496°， 46.048°， 40.697° and 21.973°. In the FTIR profiles， 4 wavenumber ranges（399.193-403.050， 1 186.010-1 471.420， 1 801.190-2 620.790， 3 612.020-3 997.710 cm^-1） and 12 characteristic wavenumbers（1 428.994， 1 430.922， 1 432.851， 1 434.779， 1 436.708， 1 438.636， 1 440.565， 1 442.493， 1 444.422， 1 446.350， 1 448.279， 1 450.207 cm^-1） were identified. In the TG-DTA profiles， there were characteristic decomposition peaks of ammonium ion and mass reduction features near 555.34 ℃ for A. alum. These characteristics could serve as important criteria for distinguishing the authenticity of Alumen. ConclusionXRD， FTIR and TG-DTA can be used to rapidly detect Alumen and A. alum， and combined with the discriminant features selected through chemometrics， the rapid and accurate identification of Alumen and A. alum can be achieved. The research findings provide new approaches for the rapid identification of Alumen.

Objective: To identify small molecule peptides specifically binding to RhE antigen via phage display technology, providing a theoretical basis to prevent RhE alloimmunization. Methods: A peptide (FLWMFWPSVNSPLLRSPIQRKNA) with RhE antigen-specific amino acids was artificially synthesized as the target peptide. A random phage display 12-mer peptide library was screened in vitro against the artificially synthesized peptide via phage display technology. After two rounds screening in vitro and ELISA identification of the monoclonal phage, amplification and purification were carried out. Sequencing of the positive phage clones derived exogenous peptide amino acid sequences that specifically bind to RhE antigen, with target-binding specificity confirmed by competitive antibody inhibition assays. Results: Two rounds screening of the target peptides results showed a significant enrichment of phages that specifically bind to the target peptides. 96 phage clones were randomly selected for ELISA identification after two rounds screening, and the results showed 23 positive clones with good affinity for the target peptide. After further verification by ELISA, 13 phage clone results were consistent with the initial ELISA identification results, which indicated that these 13 clones have good affinity for the target peptide. DNA sequencing of these clones yielded five amino acid sequences: THDRNNTPVWRF, TPYETIFDPRTS, TFWQMSADTQAL, AASSTLSIYPPR and SHDTRSPFTWGR. Competitive inhibition assays revealed all five peptides have competitive inhibitory effects with anti-E antibodies. Conclusion: Based on phage display technology, 5 small molecule peptides that specifically bind to RhE antigen have been successfully identified, which may provide a research basis for the prevention of HDFN by small molecule peptides and also provide new ideas for preventing RhE antigen alloimmunization.

The phase changes and quantity-quality transfer of 17 batches of Ostreae Concha(Ostrea rivularis) during the raw material-calcined decoction pieces-standard decoction process were analyzed. The content of calcium carbonate(CaCO_3), the main component, was determined by chemical titration, and the extract yield and transfer rate were calculated. The CaCO_3 content in the raw material, calcined decoction pieces, and standard decoction was 94.39%-98.80%, 95.03%-99.22%, and 84.58%-90.47%, respectively. The process of raw material to calcined decoction pieces showed the yield range of 96.85% to 98.55% and the CaCO_3 transfer rate range of 96.92% to 99.27%. The process of calcined decoction pieces to standard decoction showed the extract yield range of 2.86% to 5.48% and the CaCO_3 transfer rate range of 2.59% to 5.13%. The results of X-ray fluorescence(XRF) assay showed that the raw material, calcined decoction pieces, and standard decoction mainly contained Ca, Na, Mg, Si, Br, Cl, Al, Fe, Cr, Mn, and K. The chemometric results showed an increase in the relative content of Cr, Fe, and Si from raw material to calcined decoction pieces and an increase in the relative content of Mg, Al, Br, K, Cl, and Na from calcined decoction pieces to standard decoction. X-ray diffraction(XRD) was employed to establish XRD characteristic patterns of the raw material, calcined decoction pieces, and standard decoction. The XRD results showed that the main phase of all three was calcite, and no transformation of crystalline form or generation of new phase was observed. Fourier transform infrared spectroscopy(FTIR) was employed to establish the FTIR characteristic spectra of the raw material, calcined decoction pieces, and standard decoction. The FTIR results showed that the raw material had internal vibrations of O-H, C-H, C=O, C-O, and CO■ groups. Due to the loss of organic matter components after calcination, no information about the vibrations of C-H, C=O, and C-O groups was observed in the spectra of calcined decoction pieces and standard decoction. In summary, this study elucidated the quantity-quality transfer and phase changes in the raw material-calcined decoction pieces-standard decoction process by determining the CaCO_3 content, calculating the extract yield and transfer rate, and comparing the element changes, FTIR characteristic spectra, and XRD characteristic pattern. The results were reasonable and reliable, laying a foundation for the subsequent process research and quality control of the formula granules of calcined Ostreae Concha(O. rivularis Gould), and providing ideas and methods for the quality control of the whole process of raw material-decoction pieces-standard decoction-formula granules of Ostreae Concha and other testacean traditional Chinese medicine.
Drugs, Chinese Herbal/isolation & purification* ; Calcium Carbonate/analysis* ; Quality Control

Bariatric and metabolic surgery has become a primary treatment for decompensated obesity, with the number of procedures rapidly increasing in China in recent years. Various improved and novel surgical techniques have emerged. Given the characteristics of the Chinese obese population lower body mass index compared to Western populations and frequent pancreatic islet dysfunction laparoscopic Roux-en-Y gastric bypass remains one of the mainstream procedures in China. Although the Procedural Guideline for Laparoscopic Roux-en-Y Gastric Bypass (2019 Edition) has provided standardized surgical steps, mastering and routinely implementing the procedure in clinical practice continues to pose significant challenges. Compared to laparoscopic sleeve gastrectomy, laparoscopic Roux-en-Y gastric bypass is more technically demanding and requires a longer learning curve. To avoid suboptimal weight loss or severe postoperative complications resulting from non-standardized techniques, this article summarizes the authors' clinical experience, emphasizing key technical steps: creation of the gastric pouch, standardization of gastrojejunal and jejunojejunal anastomoses, hiatal closure, and full serosalization. These insights aim to improve procedural safety and therapeutic efficacy by offering a set of practical process optimization strategies.
Humans ; Gastric Bypass/methods* ; Laparoscopy/methods* ; Obesity, Morbid/surgery* ; Postoperative Complications/prevention & control* ; China ; Jejunum/surgery* ; Gastrectomy/methods* ; Anastomosis, Surgical/methods* ; Weight Loss

ObjectiveTo investigate the clinical efficacy of Huangqi injection combined with Buzhong Yiqi acupuncture in the treatment of chronic fatigue syndrome （CFS） with Qi deficiency and its effects on TCM syndromes， fatigue symptoms， serum superoxide dismutase （SOD）， malondialdehyde （MDA）， and oxidized low-density lipoprotein （ox-LDL） levels. MethodA total of 200 patients with CFS of Qi deficiency were randomly divided into a control group （100 cases） and an observation group （100 cases）. The control group was treated with vitamin B compounds， and the observation group was treated with Huangqi injection combined with Buzhong Yiqi acupuncture for two weeks. The scores of TCM syndromes， fatigue symptoms， levels of serum SOD， MDA， and ox-LDL and the incidence of adverse reactions were observed and compared before and after treatment in two groups. ResultAfter treatment， the total effective rate of the control group was 54.34% （50/92）， while that of the observation group was 88.54% （85/96）. The total effective rate of the observation group was higher than that of the control group （χ²=27.13，P<0.05）. Compared with those in the two groups before treatment， scores of fatigue self-assessment scale （FSAS）， physical fatigue and mental fatigue， and sleep/rest response scores of fatigue in the two groups after treatment were significantly decreased （P<0.05）. After treatment， scores of FSAS， physical fatigue and mental fatigue， and sleep/rest response scores of fatigue in the observation group were significantly decreased compared with those in the control group （P<0.05）. Compared with those in the two groups before treatment， TCM syndrome scores in the two groups after treatment were significantly decreased （P<0.05）. After treatment， TCM syndrome scores in the observation group were significantly decreased compared with those in the control group （P<0.05）. Compared with those in the two groups before treatment， MDA levels in the two groups were significantly decreased （P<0.05）， ox-LDL levels in the observation group were significantly decreased （P<0.05）， and SOD levels were significantly increased （P<0.05）. After treatment， compared with those in the control group， the serum MDA and ox-LDL levels in the observation group were significantly decreased （P<0.05）， and the serum SOD was significantly increased （P<0.05）. No serious adverse events or adverse reactions occurred during this clinical trial. ConclusionHuangqi injection combined with Buzhong Yiqi acupuncture has a good clinical curative effect in the treatment of CFS with Qi deficiency， which can effectively improve the fatigue symptoms of patients， increase the level of SOD， and reduce the level of serum MDA and ox-LDL. It is related to the production of antioxidants， inhibiting the production of lipid peroxides， and improving the body's ability to resist oxidative stress.

ObjectiveBased on the quality evaluation experience of "it is better to have a fragrant and strong aroma" summarized by materia medica of past dynasties， the chemical components of Sojae Semen Nigrum（SSN） and Sojae Semen Praeparatum（SSP） were systematically compared and analyzed， and the main fermentation products in different fermentation time were quantitatively analyzed， so as to clarify the transformation law of internal components in the processing process and provide scientific basis for the modern quality control of SSP. MethodUltra performance liquid chromatography-quadrupole tandem time-of-flight mass spectrometry（UPLC-Q-TOF-MS） was used for the structural identification of the chemical constituents of SSN and SSP， and with the aid of Progenesis QI v2.3 software， the negative ion mode was employed for principal component analysis（PCA） pattern recognition， and the data were analyzed with the aid of orthogonal partial least squares-discriminant analysis（OPLS-DA） for two-dimensional data to obtain S-plot， and components with |P|>0.1 were selected as the differential constituents. The contents of isoflavonoids in SSP during fermentation was determined by UPLC， and the samples were taken every 8 h in the pre-fermentation period and every 2 d in the post-fermentation period， and the dynamic changes of isoflavonoid contents in different fermentation stages were analyzed. The contents of amino acids and nucleosides in SSP and SSN from different fermentation stages were quantitatively analyzed by phenyl isothiocyanate（PITC） pre-column derivatization and high performance liquid chromatography（HPLC） gradient elution， and the contribution of flavor substances to the "delicious" taste of SSP was discussed by taste intensity value（TAV）. ResultA total of 19 kinds of differential components were screened out， mainly soybean saponins and isoflavones， and their contents decreased significantly or even disappeared after fermentation. In the pre-fermentation process of SSP， glycoside bond hydrolysis mainly occurred， and isoflavone glycosides in SSN were degraded and converted into the corresponding aglycones， the content of flavor substances such as amino acids increased gradually. In the post-fermentation process， protein degradation mainly occurred， after 8 d of post-fermentation， the content of isoflavones was basically stable， while the total content of amino acids increased by 8-40 times on average. Different amino acids form the special flavor of SSP， such as the TAV of glutamate is always ahead of other flavor substances， and sweet substances such as alanine and valine have made relatively great contributions to SSP. ConclusionBased on the law of constituent transformation， combined with the traditional evaluation index of "fragrant and strong"， it is difficult to control the fermentation degree of SSP by the existing standards in the 2020 edition of Chinese Pharmacopoeia. It is suggested that description of the characteristics of SSP be refined and changed to "fragrant， delicious and slightly sweet"， and at the same time， the post-fermentation index compounds such as glutamic acid， alanine and valine should be added as the quality control indicators of SSP， so as to standardize the production process and improve the quality of SSP.

Obesity is a global public health problem, and bariatric metabolic surgery is the most effective measure to treat obesity and related complications. With the development of bariatric and metabolic surgery, hospitals at different levels across the country have successively carried out bariatric metabolic surgery, in which laparoscopic sleeve gastrectomy is the most popular. Problems such as postoperative complications and weight regain are increasing due to irregular surgical opera-tions. Combining with their own experience and the characteristics of medical center, the authors summarize the operation details of laparoscopic sleeve gastrectomy in order to further standardize the operation of laparoscopic sleeve gastrectomy and reduce the incidence of postoperative complications.

As an important complementary form of decoction pieces of traditional Chinese medicine（TCM）， TCM dispensing granules has the advantages of being free of decoction， easy to take， easy to carry and easy to be dispensed， which greatly improves the capacity of emergency services of TCM and is more in line with the needs of modern society. With the end of the pilot project of TCM dispensing granules， the market has been fully liberalized， the competition has been intensified， and it is in the transition period of switching between the new standard and the old one， and there are some problems such as the shortage of varieties， the change of specifications and the difference of quality， and the production enterprises are facing new opportunities and challenges. Based on this， the authors intend to systematically sort out the policies and regulations， enterprise layout and standard formulation since the pilot of TCM dispensing granules. In view of the problems in the post-pilot stage and from the perspective of survival and development of enterprises， it is suggested that enterprises should establish a quality control system for the whole industry chain of TCM dispensing granules to reduce process costs and increase enterprise competitiveness， further increase the investment in scientific research， overcome the key technical problems of difficult varieties， actively and orderly promote the research of national standards， in order to ensure the integrity of clinical formula varieties， and establish and improve the efficacy evaluation mechanism of TCM dispensing granules， build a consistency evaluation system between TCM dispensing granules and decoction pieces. Government departments should strengthen the guidance， fully mobilize the enthusiasm of scientific research institutions， enterprises and hospitals， and explore the establishment of "government-industry-study-research-application" mode to promote the development of TCM dispensing granule industry.

OBJECTIVES: Surgical robot system has broken the limitation of traditional surgery and shown excellent performance in surgery, and has been widely used in minimally invasive treatment in most areas of surgery. This study aims to verify the basic performance of the domestic surgical robot system and the safety and effectiveness of the integrated bipolar electrocoagulation and ultrasonic knife. METHODS: The basic performance of the domestic surgical robot system was evaluated by completing the square knot and surgical knot, vertical and horizontal perforation and right ring perforation and suture, as well as picking up beans. Compared with laparoscopy, the safety and effectiveness of the domestic surgical robot after integrated interconnection bipolar electrocoagulation and ultrasonic scalpel were evaluated by detecting the vascular closure performance and the degree of histopathological damage in animals. RESULTS: Compared with freehand knotting, domestic robot knotting speed and circumference were slightly worse, but better than laparoscopic knotting. There was no statistical significance in the tension difference of the surgical knots among the 3 methods (P>0.05), but the tension of the square knots made by the freehand and the domestic surgical robot was greater than that of the laparoscopy (P<0.05). The space required for both the left and right forceps heads of knots was smaller than that of laparoscopy (P<0.001), which successfully completed the 4 quadrant suture tasks, and the time of picking up beans was significantly less than that of laparoscopy (P<0.05). There was no significant difference in the temperature of the liver tissue after the bipolar electrocoagulation between the interconnected domestic surgical robot and the laparoscopy (P>0.05), and the acute thermal injury was observed under the light microscope. The temperature of the liver tissue treated by the domestic robotic ultrasound knife was higher than that of the laparoscopic ultrasound knife (P<0.05). CONCLUSIONS Domestic surgical robots are obviously superior to laparoscopy in suturing, knotting, and moving objects, and domestic surgical robots' interconnect bipolar electrocoagulation and ultrasonic knife have achieved success in animal experiments, and hemostasis is considered to be safe and effective.
Animals ; Robotics ; Laparoscopy/methods* ; Ultrasonography