Objective:To investigate the correlations between subjective nasal patency, nasal valve area size and aerodynamic parameters in normal nasal cavity by means of numerical simulation, and to explore the effect of nasal valve on nasal subjective sensation and nasal airflow regulation.Methods:A total of 52 healthy participants (31 males and 21 females) with the average age of 37.8 years, were recruited from the outpatient Department of Otorhinolaryngology Head and Neck Surgery, the Ninth People′s Hospital Affiliated to the Medical College of Shanghai Jiao Tong University between January and August 2023. Visual Analog Scale (VAS) scores for unilateral nasal subjective sensation were obtained from all participants. Additionally, the aerodynamic characteristics of inspiratory airflow were simulated. A correlation matrix analysis was conducted to identify the correlation strength between these subjective and objective parameters.Results:VAS scores showed negative correlations with unilateral nasal valve cross-sectional area ( r=-0.85, P<0.01) and unilateral intranasal airflow ( r=-0.57, P<0.01), and was a positive correlation with unilateral nasal resistance (NR) at the front-end of inferior turbinate ( r=0.61, P<0.01). The average cross-sectional area of unilateral nasal valve was (0.85±0.35) cm 2. The cross-sectional area of unilateral nasal valve was negatively correlated with unilateral NR ( r=-0.50, P<0.01), and positively correlated with unilateral nasal airflow ( r=0.61, P<0.01). The NR at the nasal valve area accounted for (40.41±23.54)% of the total unilateral NR. Nearly half of the unilateral NR [(46.74±21.38)%] and air warming [(49.96±10.02)%] occurring before the front end of inferior turbinate were achieved. Conclusions:The nasal valve area plays a crucial role in influencing nasal NR, unilateral nasal airflow, and changes in nasal airflow temperature. Moreover, it is associated with subjective perception of nasal patency.

An UHPLC-Q-exactive orbitrap MS method for the simultaneous determination of 19 chemical components in Qilong Zhuang'er oral liquid was established and the quality differences between different batches of samples was compared by chemometric analysis to provide a basis for the quality evaluation of the preparation. The contents of allantoin, L-proline, pyroglutamic acid, hordenine, adenosine, L-phenylalanine, guanosine, L-tryptophan, caffeic acid, calycosin-7-glucoside, verbascoside, isoacteoside, ononin, calycosin, 3-hydroxy-9,10-dimethoxyptercarpan, formononetin, atractylenolide III, atractylenolide II and astragaloside A were analyzed by cluster heat map, principal component analysis (PCA) and partial least squares discriminant analysis (PLS-DA) using Hiplot platform and Markerlynx^XS software to comprehensively evaluate the quality difference of different batches of Qilong Zhuang'er oral liquid. The 19 chemical compounds showed good linearity in their respective concentration ranges (r ≥ 0.999). The RSD of precision, repeatability and stability (24 h) tests were all less than 1.94%. The average recovery was 97.24%-102.75% (RSD < 2.74%, n = 6). The 10 batches of samples were divided into two categories by cluster heat map and PCA analysis. 3-Hydroxy-9,10-dimethoxyptercarpan, atractylenolide III, calycosin, atractylenolide II, formononetin, allantoin and caffeic acid were identified as differential markers by PLS-DA. The established multi component quantitative method of Qilong Zhuang'er oral liquid combined with chemometric analysis can provide reference for the quality evaluation of the preparation.

Objective:To evaluate the effect of surgical revision of nasofacial deformity secondary to maxillary frontal process fracture.Methods:The clinical data of patients with nasofacial deformities secondary to maxillary frontal process fractures who underwent surgery in the Department of Otolaryngology, Head and Neck Surgery of Ninth People’s Hospital Affiliated to Shanghai Jiao Tong University School of Medicine from January 2009 to December 2020 were retrospectively analyzed. The nasofacial deformity was surgically treated by open reduction with internal fixation, nasal septum correction, and reconstruction of orbital wall fracture. Three months after surgery, the surgical results were evaluated from the following three aspects. (1) Nasofacial morphology, which was evaluated by two doctors and the patient, and was classified into 3 levels: very satisfied, satisfied, and unsatisfied. (2) Objective assessment of nasal ventilation function, which was measured by nasal acoustic rhinometry and nasal resistance detection, including measurements of nasal minimum cross-sectional area (MCA), nasal volume 7 cm from the anterior nostril (NV), total nasal inspiratory resistance (TRi) and total nasal expiratory resistance (TRe). To eliminate the differences caused by swelling of the nasal mucosa, the patients were divided into 3 groups of <7 d, 7-14 d, and >14 d according to the time from trauma to preoperative examination for pre- and post-operative comparisons, respectively. (3) Subjective assessment of nasal ventilation function was performed using the nasal obstructive symptom evaluation (NOSE) scale, with a total score of 0 to 20, with a higher score indicating more severe nasal obstruction symptoms. The SPSS 17.0 software was used for statistical analysis, and the measurement data were expressed as Mean±SD. A paired t-test was used to compare the preoperative and 3-month postoperative data, with P<0.05 indicating a statistically significant difference. Results:A total of 83 patients were included, 53 males and 30 females, aged 7 to 78 years, with a median of 35 years. All patients underwent successful surgery, and all soft tissue incisions healed well after surgery with improved nasofacial morphology. Three months after surgery, the physicians were very satisfied and satisfied with the nasofacial morphology in 49 (59%) and 34 (41%) patients, respectively, and patients were very satisfied, satisfied, and unsatisfied in 51 (61%), 29 (35%), and 3(4%) cases, respectively. Before surgery, the <7 d group (14 cases), 7-14 d group (28 cases), and >14 d group (41 cases) had MCA values of (0.43±0.10) cm 2, (0.51±0.15) cm 2, and (0.50±0.14) cm 2; NV values of (9.76±2.20) cm 3, (12.40±4.15) cm 3, and (12.40±3.87) cm 3; TRi values of (1.93±0.28) kPa·L -1·s -1, (1.96±0.24) kPa·L -1·s -1, and (1.96±0.23) kPa·L -1·s -1; TRe values of (2.02±0.35) kPa·L -1·s -1, (2.08±0.38) kPa·L -1·s -1, and (2.08±0.34) kPa·L -1·s -1, respectively. Three months after surgery, in the three groups, the MCA values were (0.48±0.08) cm 2, (0.56±0.15) cm 2, and (0.56±0.14) cm 2; the NV values were (11.56±2.49) cm 3, (14.40±4.50) cm 3, and (14.41±4.24) cm 3; the TRi values were (1.74±0.19) kPa·L -1·s -1, (1.78±0.15) kPa·L -1·s -1, (1.78±0.14) kPa·L -1·s -1; the TRe values were (1.73±0.24) kPa·L -1·s -1, (1.79±0.24) kPa·L -1·s -1, and (1.79±0.22) kPa·L -1·s -1, respectively. In all three groups, the MCA and NV values at 3 months postoperatively were greater than the preoperative values of MCA and NV (all P < 0.01), and the TRe and TRi values at 3 months postoperatively were less than those preoperative values (all P < 0.01). At 3 months postoperatively, the NOSE scale score was (4.1±1.2)points, which was significantly lower than the preoperative score of NOSE scale score[(10.5±1.8)points] ( P<0.01). Conclusion:The combination of objective and subjective assessment method can help the surgeon to accurately determine the nasofacial morphological and functional defects caused by the fracture of the maxillary frontal process area before surgery and to formulate a perfect surgical plan. The patients’ nasofacial appearance and nasal ventilation functions were significantly improved after the fracture revision surgery.

Objective:To evaluate the effect of surgical revision of nasofacial deformity secondary to maxillary frontal process fracture.Methods:The clinical data of patients with nasofacial deformities secondary to maxillary frontal process fractures who underwent surgery in the Department of Otolaryngology, Head and Neck Surgery of Ninth People’s Hospital Affiliated to Shanghai Jiao Tong University School of Medicine from January 2009 to December 2020 were retrospectively analyzed. The nasofacial deformity was surgically treated by open reduction with internal fixation, nasal septum correction, and reconstruction of orbital wall fracture. Three months after surgery, the surgical results were evaluated from the following three aspects. (1) Nasofacial morphology, which was evaluated by two doctors and the patient, and was classified into 3 levels: very satisfied, satisfied, and unsatisfied. (2) Objective assessment of nasal ventilation function, which was measured by nasal acoustic rhinometry and nasal resistance detection, including measurements of nasal minimum cross-sectional area (MCA), nasal volume 7 cm from the anterior nostril (NV), total nasal inspiratory resistance (TRi) and total nasal expiratory resistance (TRe). To eliminate the differences caused by swelling of the nasal mucosa, the patients were divided into 3 groups of <7 d, 7-14 d, and >14 d according to the time from trauma to preoperative examination for pre- and post-operative comparisons, respectively. (3) Subjective assessment of nasal ventilation function was performed using the nasal obstructive symptom evaluation (NOSE) scale, with a total score of 0 to 20, with a higher score indicating more severe nasal obstruction symptoms. The SPSS 17.0 software was used for statistical analysis, and the measurement data were expressed as Mean±SD. A paired t-test was used to compare the preoperative and 3-month postoperative data, with P<0.05 indicating a statistically significant difference. Results:A total of 83 patients were included, 53 males and 30 females, aged 7 to 78 years, with a median of 35 years. All patients underwent successful surgery, and all soft tissue incisions healed well after surgery with improved nasofacial morphology. Three months after surgery, the physicians were very satisfied and satisfied with the nasofacial morphology in 49 (59%) and 34 (41%) patients, respectively, and patients were very satisfied, satisfied, and unsatisfied in 51 (61%), 29 (35%), and 3(4%) cases, respectively. Before surgery, the <7 d group (14 cases), 7-14 d group (28 cases), and >14 d group (41 cases) had MCA values of (0.43±0.10) cm 2, (0.51±0.15) cm 2, and (0.50±0.14) cm 2; NV values of (9.76±2.20) cm 3, (12.40±4.15) cm 3, and (12.40±3.87) cm 3; TRi values of (1.93±0.28) kPa·L -1·s -1, (1.96±0.24) kPa·L -1·s -1, and (1.96±0.23) kPa·L -1·s -1; TRe values of (2.02±0.35) kPa·L -1·s -1, (2.08±0.38) kPa·L -1·s -1, and (2.08±0.34) kPa·L -1·s -1, respectively. Three months after surgery, in the three groups, the MCA values were (0.48±0.08) cm 2, (0.56±0.15) cm 2, and (0.56±0.14) cm 2; the NV values were (11.56±2.49) cm 3, (14.40±4.50) cm 3, and (14.41±4.24) cm 3; the TRi values were (1.74±0.19) kPa·L -1·s -1, (1.78±0.15) kPa·L -1·s -1, (1.78±0.14) kPa·L -1·s -1; the TRe values were (1.73±0.24) kPa·L -1·s -1, (1.79±0.24) kPa·L -1·s -1, and (1.79±0.22) kPa·L -1·s -1, respectively. In all three groups, the MCA and NV values at 3 months postoperatively were greater than the preoperative values of MCA and NV (all P < 0.01), and the TRe and TRi values at 3 months postoperatively were less than those preoperative values (all P < 0.01). At 3 months postoperatively, the NOSE scale score was (4.1±1.2)points, which was significantly lower than the preoperative score of NOSE scale score[(10.5±1.8)points] ( P<0.01). Conclusion:The combination of objective and subjective assessment method can help the surgeon to accurately determine the nasofacial morphological and functional defects caused by the fracture of the maxillary frontal process area before surgery and to formulate a perfect surgical plan. The patients’ nasofacial appearance and nasal ventilation functions were significantly improved after the fracture revision surgery.

Objective:To investigate the application and clinical outcomes of using 3D computer-assisted printing technique combined with plastic titanium mesh in the reconstruction of maxillary defect.Methods:Clinical data of 14 patients in Department of Otorhinolaryngology Head and Neck Surgery, Shanghai Ninth People′s Hospital from January 2016 to June 2018, who were treated for partial or total removal of the maxilla due to benign or malignant tumors and those acquired maxillary defects caused by severe compound trauma were analyzed retrospectively. Twelve males and 2 females were included, with the age ranging from 16 to 51 years old. The sinonasal malignant tumors included squamous carcinoma ( n=2) while benign tumors included hemangioma ( n=1), maxillary fibrous dysplasia ( n=3), maxillary cyst ( n=2) and giant cell tumor of the maxilla ( n=1). Five cases of post-traumatic maxillary defect were also included. According to preoperative thin-layer CT scanning data, computer modeling data was transmitted to a 3D printer to print out the original model and the reconstructed model. Preoperative simulation of tumor removal and maxillary reconstruction was done on the patient′s original model, and the titanium mesh was shaped on the reconstructed model in order to properly reconstruct the area needed to be repaired. The pre-made titanium mesh was implanted into the defect area, the soft tissue flaps were reset, layered stitching and the local pressured bandage were used after surgery. Through postoperative clinical and CT examination, the patient′s maxillofacial shape, nasal function and complications were evaluated. The results were analyzed by descriptive statistical method. Results:Lesions could be completely removed within the predicted range on the preoperative 3D-printed models of all cases. After debridement, titanium mesh could be implanted easily without re-shaping and trimming during surgery as in trauma cases. Titanium mesh could completely cover the missing bone surface closely, with titanium nails fixed smoothly, and the implanted titanium mesh was solid and stable. After the follow-up of 6 to 20 months, all patients were satisfied with the facial symmetry and the function was recovered well.Conclusion:Using 3D computer-assisted printing technique combined with plastic titanium mesh in the reconstruction of maxillary defect can accurately restore the maxillary structure for soft tissue support, and restore the facial shape and function.

Objective:To investigate the effect of nasal septum perforation (SP) with different locations and sizes on nasal airflow by means of numerical simulation.Methods:Two healthy persons with normal nasal anatomy were enrolled in this study, including a 45 years old male (case 1) and a 36 years old female (case 2). Nasal CT data was used as the basis to create nasal airway numerical models of nasal SP with different locations (anterior caudal, central caudal, posterior caudal and anterior cranial) and sizes (diameter of 10 mm and 5 mm respectively). The inspiratory airflow characteristics (nasal cavity volume, nasal cavity wall area, pressure, nasal resistance, temperature, airflow velocity, wall shear stress, airflow-rate partitioning and vortex) of these nasal airway numerical models were simulated and analyzed. Pearson correlation analysis was performed between nasal resistances, airflow temperature and nasal cavity wall area. Results:In terms of pressure and nose resistance, the anterior caudal and larger size SP lead to more obvious variation of pressure distribution, and increased nasal resistance was especially found in the nasal cavity with anterior and medium caudal SP. In terms of temperature, the anterior (caudal and cranial) and larger size SP had significant effect on local temperature gradient as same as the anterior cranial and smaller size SP. Nasal heating efficiency was lower in nasal model with the anterior and larger size SP than that in the normal model. The temperature difference from the nostril to the end of nasal septum had positive correlation with nasal cavity wall area ( R2 value of case 1 and case 2 was 0.69, 0.41, respectively, all P<0.01). In terms of airflow velocity, the anterior caudal and cranial SP had more significant effect on the average airflow velocity in the nasal cavity. The anterior and medium caudal SP could make the airflow distribution in the asymmetric bilateral nasal cavity more unbalanced compared to the bilateral symmetrical nasal models. The anterior and medium SP resulted in a more pronounced vortex distribution than the posterior SP. Conclusions:The effect of SP on nasal cavity is related to its location and size. The anterior and larger size SP shows more negative influence on intranasal pressure, nasal resistance, heat transmission efficiency, airflow-rate partitioning than the posterior and smaller size SP.

Objective To search and summarize the best evidence about the management of dysphagia in stroke domestic and abroad. Methods Computer retrieval of American guide network, BMJ best clinical practice, Scottish inter college guide network, Canadian clinical practice guide database, JBI evidence-based health care center of Australia, Ontario Registered Nurses Association of Canada, medical pulse guide network, PubMed, Ovid, EMBASE, web of science, CNKI and Wanfang database, etc, with the retrieval time limit from January 2010 to June 2019. Search for guidelines and systematic reviews related to dysphagia after stroke, evaluate and summarize the best evidence. Results A total of 11 clinical practice guidelines and 39 systematic evaluations were selected. After evidence extraction and summary, 6 categories and 32 best evidences related to dysphagia disorders of stroke were extracted, including screening, evaluation, treatment, complication prevention (oral care and nutrition risk screening), health education and training. Conclusions In order to ensure the quality of medical care and the safety of patients, medical staff should use the evidence related to dysphagia disorders of stroke according to the relevant level of evidence-based medical evidence.

Objective: To investigate the feasibility and clinical effect of reconstruction the ear using cartilage from amputated ear. Methods: 30 patients (22 males, 8 females, age 22-50, 18 cases right ear, 12 cases left ear) with partial auricles defects received replantation of amputated ears using the cartilages from the amputated ears from January, 2013 to June, 2017.Firstly, an advancements postauricular skin flap was made.Secondly, the skin of the amputated ear was removed and its cartilage was retained, then the cartilage was sutured in situ to form cartilage bracket.Finally, the postauricular crimp scalp flap was sutured to form the helix structure.After three months, the back of the reconstructive ear was repaired with the full thickness graft to restore the cranio-auricular angle. Results: Thirty cases were applied with this method to repair the defects.The sizes of auricle contour were good, and the cranio-auricular angles were restored after skin-grafting.The ear shape was stable in 3-6 months′ follow-up.VAS was used to evaluate patients satisfaction.All parameters before and after the procedure had significant difference (P<0.05). Conclusions Patients with partial auricles defects can receive replantation of amputated ears using the cartilages from the amputated ears which has the advantage of short treatment period, satisfactory clinical effect and avoidance using the costal cartilages.Its long-term effect is stable.

Objectives: The purpose of this study is to understand the relationships among plasma glucose, blood pressure level and Traditional Chinese Medicine (TCM) syndromes in Shanghai community residents, and provide a theoretical basis for the prevention of community chronic disease based on TCM syndrome differentiation.Methods: Residents above35 years old will attend the Type 2 Diabetes Mellitus (T2 DM) risk assessment at Community Health Center. By distributing questionnaires and performing glucose testing, we screened the residents at high risk of T2 DM, and conducted a physical examination of them. Further, a body constitution questionnaire was required to be completed by the residents. Results: In total, 933 residents were screened. The plasma glucose and blood pressure levels related to age, waist circumference, hip circumference, body mass index (BMI) and waist-to-height ratio (WHtR) . Residents with increasing blood pressure have an increased risk of T2 DM (P ＜ 0.01) . Total 529 questionnaires were completed, and 129 subjects (24.4％) have single TCM syndromes, 75 subjects (14.2％) have at least two TCM syndromes and 325 subjects (61.4％) have no TCM syndromes. Conclusion: Plasma glucose and blood pressure are associated and interacted with several physical indexes. TCM syndromes distribution was found no significant change among subjects with different plasma glucose and blood pressure.

Objective? To explore the status quo of chief nurse's integrity leadership behavior perceived by nurses and nurses' work restriction and to discuss the correlation between the two. Methods? Nurses from 5 internal medicine departments, 5 surgery departments, the emergency department, the intensive care unit, the obstetrics and gynecology department and the operation room from a ClassⅢ Grade A hospital in Zhengzhou were selected by hierarchical sampling, between October and December 2016, and investigated with the Integrity Leadership Questionnaire and the Work Restriction Questionnaire for Nurses. Pearson correlation analysis was used to analyze the relationship between the two. Totally 300 questionnaires were distributed, and 280 questionnaires were collected, with a recovery rate of 93.3%. Results? The total scores chief nurse's integrity leadership behavior and work restriction in the 280 nurses were (32.26±4.13) and (40.23±10.06), respectively. The 4 dimensions of chief nurse's integrity leadership behavior were negatively correlated with the total score of nurse's work restriction (P＜0.05). Conclusions? Chief nurse's integrity leadership behavior and nurses' work restriction at a medium level. Nurses' working efficacy may be improved by improving chief nurse's integrity leadership behavior.