OBJECTIVE: To screen the population for acupuncture treatment of neck pain, using functional magnetic resonance imaging (fMRI) technology and based on machine learning algorithms. METHODS: Eighty patients with neck pain were recruited. Using FPX25 handheld pressure algometer, the tender points were detected in the areas with high-frequent onset of neck pain and high degree of acupoint sensitization. Acupuncture was delivered at 4 tender points with the lowest pain threshold, once every two days; and the treatment was given 3 times a week and for 2 consecutive weeks. The amplitude of low-frequency fluctuation (ALFF) of the brain before treatment was taken as a predictive feature to construct support vector machine (SVM), logistic regression (LR), and K-nearest neighbors (KNN) models to predict the responses of neck pain patients to acupuncture treatment. A longitudinal analysis of the ALFF features was performed before and after treatment to reveal the potential biological markers of the reactivity to the acupuncture therapy. RESULTS: The SVM model could successfully distinguish high responders (48 cases) and low responders (32 cases) to acupuncture treatment, and its accuracy rate reached 82.5%. Based on the SVM model, the ALFF values of 4 brain regions were identified as the consistent predictive features, including the right middle temporal gyrus, the right superior occipital gyrus, and the bilateral posterior cingulate gyrus. In the patients with high acupuncture response, the ALFF value in the left posterior cingulate gyrus decreased after treatment (P<0.05), whereas in the patients with low acupuncture response, the ALFF value in the right superior occipital gyrus increased after treatment (P<0.01). The longitudinal functional connectivity (FC) analysis found that compared with those before treatment, the high responders showed the enhanced FC after treatment between the left posterior cingulate gyrus and various regions, including the bilateral Crus1 of the cerebellum, the right insula, the bilateral angular gyrus, the left medial superior frontal gyrus, and the left middle cingulate gyrus (GRF: corrected, voxel level: P<0.05, mass level: P<0.05). In contrast, the low responders exhibited the enhanced FC between the left posterior cingulate gyrus and the left Crus2 of the cerebellum, the left middle temporal gyrus, the right posterior cingulate gyrus, and the left angular gyrus; besides, FC was reduced in low responders between the left posterior cingulate gyrus and the right supramarginal gyrus (GRF: corrected, voxel level: P<0.05, mass level: P<0.05). CONCLUSION This study validates the practicality of pre-treatment ALFF feature prediction for acupuncture efficacy on neck pain. The therapeutic effect of acupuncture on neck pain is potentially associated with its impact on the default mode network, and then, alter the pain perception and emotional regulation.
Humans ; Neck Pain/physiopathology* ; Acupuncture Therapy ; Female ; Male ; Adult ; Middle Aged ; Machine Learning ; Magnetic Resonance Imaging ; Young Adult ; Brain/physiopathology* ; Acupuncture Points ; Aged

OBJECTIVE: To evaluate precise assessment methods for predicting the optimal acetabular cup size in total hip arthroplasty (THA). METHODS: A clinical data of 73 patients (80 hips) who underwent primary THA between December 2022 and July 2024 and met the inclusion criteria was analyzed. There were 39 males and 34 females with an average age of 66.3 years (range, 56-78 years). Among them, 66 cases were unilateral THA and 7 were bilateral THAs. There were 29 patients (34 hips) of osteoarthritis, 35 patients (35 hips) of femoral neck fractures, and 9 patients (11 hips) of osteonecrosis of the femoral head. Based on anteroposterior pelvic X-ray films, three methods were employed to predict acetabular cup size, including preoperative template planning, radiographic femoral head diameter (FHD) measurement, and intraoperative FHD measurement. The predicted acetabular cup sizes from these methods were compared with the actual implanted sizes. RESULTS: The predicted acetabular cup sizes using the preoperative template planning, radiographic FHD measurement, and intraoperative FHD measurement were (51.25±2.81), (49.72±3.11), and (49.90±2.74) mm, respectively, compared to the actual implanted cup size of (50.57±2.74) mm, with no significant difference ( P>0.05). Regarding agreement with the actual implanted cup size, the preoperative template planning achieved exact matches in 35 hips (43.75%), one-size deviation in 41 hips (51.25%), and two-size deviations in 4 hips (5%); the radiographic FHD measurement achieved exact matches in 12 hips (15%), one-size deviation in 57 hips (71.25%), and two-size deviations in 11 hips (13.75%); and the intraoperative FHD measurement achieved exact matches in 26 hips (32.5%), one-size deviation in 52 hips (65%), and two-size deviations in 2 hips (2.5%). There were significant differences in agreement distributions between the three methods and the actual implanted cup sizes ( H=18.579, P<0.001). CONCLUSION The intraoperative FHD measurement, as a simple, cost-effective, and accurate method, effectively guides acetabular cup selection, reduces the risk of prosthesis wear, enhances postoperative joint stability.
Humans ; Arthroplasty, Replacement, Hip/instrumentation* ; Male ; Female ; Middle Aged ; Acetabulum/diagnostic imaging* ; Aged ; Hip Prosthesis ; Prosthesis Design ; Femur Head/surgery* ; Osteoarthritis, Hip/surgery* ; Radiography ; Femoral Neck Fractures/surgery* ; Femur Head Necrosis/surgery*

OBJECTIVE: To explore the feasibility of reconstruction of phonatory function by using a tubular free flap from upper-lateral upper arm to repair the laryngotracheal circumferential defect after near-total laryngectomy for laryngeal cancer. METHODS: A retrospective study was conducted on 7 patients who underwent near-total laryngectomy between June 2021 and October 2023, aged from 48 to 70 years (median, 59 years), 6 males and 1 female. The disease duration ranged from 1 to 11 months, with a median of 6 months. Pathological diagnosis of preoperative biopsy was squamous cell carcinoma. Tumor classification: glottic type in 5 cases, supraglottic type in 1 case, transglottic type in 1 case; TNM staging: T ₄N ₀M ₀ in 6 cases, T ₄N ₂M ₀ in 1 case; American Joint Committee on Cancer (AJCC) staging in 2017 was stage Ⅳ. Preoperative MRI angiography of upper arm was performed to investigate the blood supply in the upper and lateral regions of the upper arm. After near-total laryngectomy and bilateral neck lymph node dissection, the area of the laryngotracheal defect was measured. A free flap measuring 7.0 cm×5.0 cm to 8.0 cm×7.0 cm was harvested from the upper-lateral upper arm, rolled into a tube shape, and connected between the stump of the cervical trachea in the neck root and that of the epiglottis at the tongue base. Four patients received adjuvant radiochemotherapy, 1 patient received radiochemotherapy and targeted therapy, 2 patients adopted no further adjuvant treatment. RESULTS: All 7 patients were followed-up 1-2 years (mean, 1 year and 3 months). Four patients had primary wound healing, 2 patients had minor pharyngeal fistulas that healed after dressing change, 1 patient experienced pharyngeal fistula because of flap necrosis and the wound still healed without secondary surgery. All patients took food orally within 1 month after operation, and the tracheal cannula was retained. Six patients with survived flap gradually adapted to their new pronunciation mode and obtained satisfactory phonatory function from 15 days to 2 months after operation. Four patients had slight aspiration after operation. Till the end of the follow-up, all patients survived and no local recurrence or distant metastasis had been observed. The motor function of the upper arm was not affected, only partial sensory loss occurred in the area near the incision. The scar of the incision could be covered by the short sleeve so as to obtain a better aesthetic effect. CONCLUSION Using a tubular free flap from upper-lateral upper arm to repair the laryngotracheal circumferential defect after near-total laryngectomy for laryngeal cancer can achieve satisfactory phonatory restoration while preserve the motor function and aesthetics of the donor site.
Humans ; Laryngectomy/methods* ; Male ; Middle Aged ; Female ; Laryngeal Neoplasms/surgery* ; Aged ; Free Tissue Flaps ; Retrospective Studies ; Plastic Surgery Procedures/methods* ; Carcinoma, Squamous Cell/surgery* ; Phonation ; Arm/surgery* ; Neck Dissection

OBJECTIVE: To investigate the effectiveness of using 3 hollow compression screws combined with 1 screw off-axis fixation under the guidance of three-dimensional (3D) printed guide plate with mortise-tenon joint structure (mortise-tenon joint plate) for the treatment of Pauwels type Ⅲ femoral neck fractures. METHODS: A clinical data of 78 patients with Pauwels type Ⅲ femoral neck fractures, who were admitted between August 2022 and August 2023 and met the selection criteria, was retrospectively analyzed. The operations were assisted with mortise-tenon joint plates in 26 cases (mortise-tenon joint plate group) and traditional guide plates in 28 cases (traditional plate group), and without guide plates in 24 cases (control group). There was no significant difference in the baseline data of gender, age, body mass index, cause of injury, and fracture side between groups ( P>0.05). The operation time, intraoperative blood loss, frequency of intraoperative fluoroscopy, incision length, incidence of postoperative deep vein thrombosis of lower extremity, pain visual analogue scale (VAS) score at 1 week after operation, and Harris score of hip joint at 3 months after operation were recorded and compared. X-ray re-examination was taken to check the quality of fracture reduction, fracture healing, and the shortening length of the femoral neck at 3 months after operation, and the incidences of internal fixation failure and osteonecrosis of the femoral head during operation. RESULTS: Compared with the control group, the operation time, intraoperative blood loss, and frequency of intraoperative fluoroscopy reduced in the two plate groups, and the quality of fracture reduction was better, but the incision was longer, and the differences were significant ( P<0.05). The operation time and intraoperative blood loss were significantly higher in the traditional plate group than in the mortise-tenon joint plate group ( P<0.05), the incision was significantly longer ( P<0.05); and the difference in fracture reduction quality and the frequency of intraoperative fluoroscopy was not significant between two plate groups ( P>0.05). There was 1 case of deep vein thrombosis of lower extremity in the traditional plate group and 1 case in the control group, while there was no thrombosis in the mortise-tenon joint plate group. There was no significant difference in the incidence between groups ( P>0.05). All patients were followed up 12-15 months (mean, 13 months). There was no significant difference in VAS score at 1 week and Harris score at 3 months between groups ( P>0.05). Compared with the control group, the fracture healing time and the length of femoral neck shortening at 3 months after operation were significantly shorter in the two plate groups ( P<0.05). There was no significant difference between the two plate groups ( P>0.05). There was no significant difference in the incidences of non-union fractures, osteonecrosis of the femoral head, or internal fixation failure between groups ( P>0.05). CONCLUSION For Pauwels type Ⅲ femoral neck fractures, the use of 3D printed guide plate assisted reduction and fixation can shorten the fracture healing time, reduce the incidence of postoperative complications, and be more conducive to the early functional exercise of the affected limb. Compared with the traditional guide plate, the mortise-tenon joint plate can reduce the intraoperative bleeding and shorten the operation time.
Humans ; Femoral Neck Fractures/diagnostic imaging* ; Bone Plates ; Fracture Fixation, Internal/instrumentation* ; Male ; Female ; Retrospective Studies ; Middle Aged ; Bone Screws ; Adult ; Aged ; Treatment Outcome ; Printing, Three-Dimensional ; Operative Time

OBJECTIVE: To investigate whether adding 1 transverse screw (TS) to the triangular parallel cannulated screw (TPCS) fixation has a mechanical stability advantage for Pauwels type Ⅲ femoral neck fractures by conducting finite element analysis on four internal fixation methods. METHODS: Based on CT data of a healthy adult male volunteer's femur, three Pauwels type Ⅲ femoral neck fracture models (Pauwels angle 70°, Pauwels angle 80°, and Pauwels angle 70° combined with bone defect) were constructed using Mimics 21.0 software and SolidWorks 2017 software. Four different internal fixation models were built at the same time, including TPCS, TPCS+TS, three cross screws (TCS), and TPCS+medial buttress plate (MBP). The mechanical stability of different models under the same load was compared by finite element analysis. RESULTS: The femoral model established in this study exhibited a maximum stress of 28.62 MPa, with relatively higher stress concentrated in the femoral neck. These findings were comparable to previous studies, indicating that the constructed femoral finite element model was correct. The maximum stress of internal fixation in finite element analysis showed that TCS was the lowest and TPCS+MBP was the highest in Pauwels angle 70° and 80° models, while TPCS+TS was the lowest and TCS was the highest in Pauwels angle 70° combined with bone defect model. The maximum displacement of internal fixation in each fracture model was located at the top of the femoral head, with TCS having the highest maximum displacement of the femur. The maximum stress of fracture surface in finite element analysis showed that TCS was the lowest and TPCS was the highest in the Pauwels angle 70° model, while TPCS+MBP was the lowest and TPCS/TCS were the highest in the Pauwels angle 80° model and the Pauwels angle 70° combined with bone defect model, respectively. The maximum displacement of fracture surfece analysis showed that TPCS+MBP was the lowest and TCS was the highest in Pauwels angle 70° and 80° models, while TPCS+TS was the lowest and TCS was the highest in Pauwels angle 70° combined with bone defect model. CONCLUSION For Pauwels type Ⅲ femoral neck fractures, the biomechanical stability of TPCS+TS was superior to that of TPCS alone and TCS, but it has not yet reached the level of TPCS+MBP.
Finite Element Analysis ; Humans ; Femoral Neck Fractures/diagnostic imaging* ; Bone Screws ; Fracture Fixation, Internal/instrumentation* ; Male ; Bone Plates ; Stress, Mechanical ; Biomechanical Phenomena ; Tomography, X-Ray Computed ; Adult ; Femur Neck/surgery*

OBJECTIVE: To investigate the effectiveness of Holosight robotic navigation-assisted percutaneous cannulated screw fixation for femoral neck fractures. METHODS: A retrospective analysis was conducted on 65 patients with femoral neck fractures treated with cannulated screw fixation between January 2022 and February 2024. Among them, 31 patients underwent robotic navigation-assisted screw placement (navigation group), while 34 underwent conventional freehand percutaneous screw fixation (freehand group). Baseline characteristics, including age, gender, fracture side, injury mechanism, Garden classification, Pauwels classification, and time from injury to operation, showed no significant differences between the two groups ( P>0.05). The operation time, intraoperative blood loss, fluoroscopy frequency, fracture healing time, and complications were recorded and compared, and hip function was evaluated by Harris score at last follow-up. Postoperative anteroposterior and lateral hip X-ray films were taken to assess screw distribution accuracy, including deviation from the femoral neck axis, inter-screw parallelism, and distance from screws to the femoral neck cortex. RESULTS: No significant difference was observed in operation time between the two groups ( P>0.05). However, the navigation group demonstrated superior outcomes in intraoperative blood loss, fluoroscopy frequency, deviation from the femoral neck axis, inter-screw parallelism, and distance from screws to the femoral neck cortex ( P<0.05). No incision infections or deep vein thrombosis occurred. All patients were followed up 12-18 months (mean, 16 months). In the freehand group, 1 case suffered from cannulated screw dislodgement and nonunion secondary to osteonecrosis of femoral head at 1 year after operation, 1 case suffered from screw penetration secondary to osteonecrosis of femoral head at 5 months after operation; and 1 case suffered from nonunion secondary to osteonecrosis of femoral head at 6 months after operation in the navigation group. All the 3 patients underwent internal fixators removal and total hip arthroplasty. There was no significant difference in the incidence of complications between the two groups ( P>0.05). The fracture healing time and hip Harris score at last follow-up in the navigation group were significantly better than those in the freehand group ( P<0.05). CONCLUSION Compared to freehand percutaneous screw fixation, Holosight robotic navigation-assisted cannulated screw fixation for femoral neck fractures achieves higher precision, reduced intraoperative radiation exposure, smaller incisions, and superior postoperative hip function recovery.
Humans ; Femoral Neck Fractures/diagnostic imaging* ; Bone Screws ; Fracture Fixation, Internal/instrumentation* ; Male ; Female ; Retrospective Studies ; Robotic Surgical Procedures/methods* ; Middle Aged ; Aged ; Adult ; Treatment Outcome ; Operative Time ; Fracture Healing ; Surgery, Computer-Assisted/methods* ; Fluoroscopy

OBJECTIVE: To summarize the research progress of rodent models of secondary lymphedema (SL) and provide a reference for selecting appropriate animal models in SL research. METHODS: Recent literature on rodent SL models at home and abroad was comprehensively analyzed, summarizing model categories, development techniques, strengths, and weaknesses. RESULTS: Current research primarily utilizes rats and mice to establish SL models. The main model types include hind limb, forelimb, tail, and head/neck models. The hind limb model is the most frequently employed, typically requiring surgery combined with irradiation to induce stable chronic edema. Forelimb models primarily simulate upper limb lymphedema, but exhibit relatively rapid edema resolution. Tail models offer operational simplicity and are predominantly used for studying acute edema mechanisms and interventions; however, they demonstrate poor clinical relevance. Emerging head/neck models provide a valuable tool for investigating head and neck cancer-associated lymphedema. These models exhibit variations in lymphedema duration, degree of fibrosis, and edema incidences. CONCLUSION Existing models still fall short in faithfully replicating the chronicity, fibrosis, fat deposition, and complex microenvironment characteristic of human chronic lymphedema. Future research must integrate multidisciplinary approaches, optimize model construction strategies, and explore novel modeling approaches to more accurately mimic the human disease and advance SL prevention and treatment research.
Lymphedema/pathology* ; Animals ; Disease Models, Animal ; Rats ; Mice ; Humans ; Head and Neck Neoplasms/complications* ; Rodentia

OBJECTIVES: This study aimed to explore the biological functions and clinical value of mothers against decapentaplegic homolog (SMAD) 7 in head and neck squamous cell carcinoma (HNSCC) through bioinformatics analysis and basic experiments. METHODS: The expression of SMAD7 in HNSCC in public databases was studied. Western blot was used to detect the expression of SMAD7 in HNSCC cell lines and normal epithelial cells. The SMAD7 highly expressed HNSCC cell line HSC-4 was silenced, and CCK-8, Transwell assays, and cell scratch experiments were conducted to study the effect of SMAD7 on the biological functions of HSC-4 cells. HNSCC expression profile data were obtained from UCSC xena, and genes related to SMAD7 were selected for gene ontology and Kyoto encyclopedia of genes and genomes gene enrichment analysis, construction of a co-expression gene interaction network, and screening of related cell signaling pathways. Western blot was used to detect the expression changes of proteins in the related cell signaling pathways in HNSCC cells with silenced SMAD7. cBioPortal was utilized to analyze the mutation rate of the SMAD7 gene, and the MethSurv database was used to analyze the methylation level of the SMAD7 gene and its correlation with prognosis. The receiver operating characteristic curve was used to assess the diagnostic value of SMAD7 for HNSCC. TIMER2.0 was used to analyze the correlation between SMAD7 expression and immune cell infiltration. RESULTS: SMAD7 was highly expressed in HNSCC tumor tissues and some cell lines. Silencing the expression of SMAD7 can significantly inhibit the proliferation, migration, and invasion of cancer cells. Silencing SMAD7 can induce the downregulation of vascular cell adhesion molecule 1 (VCAM-1). The bioinformatics analysis showed that the mutation rate of the SMAD7 gene and the methylation level were significantly correlated with the prognosis of patients with HNSCC. The expression of SMAD7 was related to the level of immune cell infiltration in HNSCC. CONCLUSIONS SMAD7 promotes the proliferation, migration, and invasion of HNSCC cells by regulating the expression of VCAM-1. It may be a potential tumor biomarker and therapeutic target for HNSCC.
Humans ; Smad7 Protein/metabolism* ; Prognosis ; Squamous Cell Carcinoma of Head and Neck ; Head and Neck Neoplasms/pathology* ; Cell Line, Tumor ; Cell Movement ; Cell Proliferation ; Signal Transduction ; Gene Expression Regulation, Neoplastic ; Gene Silencing ; Computational Biology

Objective To investigate the value of the novel lymphatic contrast-enhanced ultrasound(LCEUS)and conventional venous contrast-enhanced ultrasound(VCEUS)in the differential diagnosis of benign and malignant cervical lymph nodes in patients with thyroid cancer. Methods Patients with suspected thyroid cancer underwent conventional ultrasound,VCEUS,and LCEUS examinations of cervical lymph nodes before biopsy.The diagnostic abilities of conventional ultrasound,VCEUS,and LCEUS were compared with pathological results as the golden standard. Results Forty-four patients with 52 lymph nodes were included in the final data.Thirty-eight metastatic lymph nodes were confirmed by pathological results,and 14 were benign.The diagnostic sensitivity,specificity,and accuracy were 97.37%,71.43%,and 90.38% for LCEUS,92.11%,35.71%,and 76.92% for VCEUS,and 94.74%,21.43%,and 75.00% for conventional ultrasound,respectively.The area under the curve of LCEUS analyzed by the receiver operating characteristic curve was greater than that of VCEUS(P=0.020)and conventional ultrasound(P<0.001). Conclusion LCEUS could significantly improve the differential diagnosis of cervical lymph node metastasis in the patients with thyroid cancer,providing a basis for precise clinical treatment.
Humans ; Thyroid Neoplasms/diagnostic imaging* ; Lymphatic Metastasis/diagnostic imaging* ; Diagnosis, Differential ; Female ; Male ; Middle Aged ; Ultrasonography ; Adult ; Lymph Nodes/pathology* ; Contrast Media ; Neck ; Aged ; Young Adult ; Adolescent ; Sensitivity and Specificity

Objective To further clarify the anatomical features of the long occipital nerve and summarize the rapid anatomical method for it,thus providing an operational basis for anatomists.Methods The bilateral sides of the head and neck specimens of 38 adult formalin-fixed cadavers were dissected,with a total of 76 specimens.The lateral cervical region,the sternocleidomastoid region,and the occipital region were dissected.The dissection focused on the long occipital nerve,the location and adjacent structural characteristics of which were carefully observed.Results The long occipital nerve was dissected out from 76 specimens.Through the posterior margin line(PML)anatomical method,the long occipital nerve was identified 1-3 cm above the accessory nerve,near the posterior border of the deep surface of the upper sternocleidomastoid in 70(92.1%)specimens.Through the inflection point(IP)anatomical method,the long occipital nerve was observed within the range of the circle with a radius of about 1.5 cm and centered on the midpoint of the line between the tip of the mastoid process and the tip of the external occipital protuberance in 6(7.9%)specimens.Conclusions The long occipital nerve can be quickly found by the PML method or IP method.Although the long occipital nerve can definitely be identified by the IP method,the anatomical operation is difficult.
Humans ; Cadaver ; Spinal Nerves/anatomy & histology* ; Neck/innervation* ; Adult