The prescription of Qidong Yixin oral liquid is derived from the experience of national medical master Ren Jixue in treating viral myocarditis （VMC）. It has the functions of tonifying Qi， nourishing the heart，calming the mind， and relieving palpitations. It is used to treat VMC and angina pectoris of coronary heart disease caused by deficiency of both Qi and Yin. However，the understanding of its efficacy evidence， advantageous aspects， dosage and administration， and medication safety remains insufficient in clinical practice. Therefore，the development of the Expert Consensus on the Clinical Application of Qidong Yixin Oral Liquid （hereinafter referred to as consensus） was initiated. Consensus strictly followed the process and methods of the expert consensus on the clinical application of Chinese patent medicines of the China Association of Chinese Medicine，successively completing multiple tasks such as the consensus project initiation，determination of clinical problems，evidence search and evaluation，formation of recommendation opinions and consensus suggestions，solicitation of opinions，peer review， submission for review and release， and so on. Consensus formed a total of 10 recommendation opinions and 12 consensus suggestions，clarifying the clinical positioning，efficacy advantages，syndrome differentiation，dosage and administration，combination therapy，timing of medication，adverse reactions，contraindications， and precautions of Qidong Yixin oral liquid，indicating that it has good clinical advantages and safety in the treatment of VMC and angina pectoris of coronary heart disease，providing norms and references for physicians to safely and rationally apply Qidong Yixin oral liquid. Consensus was reviewed and approved for release by the Standardization Office of the China Association of Chinese Medicine on December 23， 2024. Standard number：GSCACM-376-2024.

Abstract The study examines the development and application of microclimate standards for primary and secondary school classrooms, so as to ensure and promote the healthy growth of primary and secondary school students. The paper systematically reviews relevant domestic and international standards, analyzes the problems and shortcomings arising from their practical application and proposes effective countermeasures, in order to provide robust references aimed at optimizing the classroom environment in primary and secondary schools for student health, as well as offering practical support to advance the construction of a healthy China.

Objective: To understand the microclimate in primary and secondary school classrooms for the study period during the winter heating season, so as to provide a reference for the revision and improvement of relevant health standards. Methods: In December 2024, stratified random sampling was used to select 30 primary and secondary schools and 180 classrooms from the northern regions with centralized heating (Liaoning Province, Tianjin City) and the southern regions without centralized heating (Shanghai City, Anhui Province, and Jiangxi Province). Indoor temperature, relative humidity, wind speed, CO 2 and other indicators were measured on site. Variance analysis, t-test, Mann-Whitney U test and Kruskal-Wallis H test were used to analyze the differences in the microclimate of classrooms among regions and urban and rural differences. Results: The average temperature in the middle of the classrooms tested on site was (16.47±4.72)℃, and the variance analysis showed that the difference between the regions was statistically significant ( F=27.80, P <0.01). Among them, Tianjin had the highest average temperature of (20.43± 2.12 )℃, followed by Liaoning (19.03±2.23)℃, Shanghai (15.33±5.32)℃, Anhui (12.79±1.74)℃, and Jiangxi (11.69± 1.68 )℃. Horizontal temperature difference was 0.90 (0.50, 1.60)℃, the vertical temperature difference was 0.20 (0.10,0.60)℃, the average relative humidity was (44.39±16.16)%, the wind speed was 0.03(0.01,0.11)m/s, and the differences among different provinces and cities were statistically significant ( H/F =40.62, 82.69, 95.06, 55.28, all P <0.01). The average CO 2 volume concentration in urban areas of Tianjin, Liaoning, and Shanghai was 0.21(0.16,0.30)%, and there was no statistically significant difference ( H=4.65, P =0.10). There were grade differences in relative humidity ( F =3.71, 6.21) and CO 2 ( H =14.72, 12.92) in the north and the south (all P <0.05). In addition, the temperature, relative humidity, wind speed and CO 2 in the middle of the classroom were 42.8%, 67.8%, 100.0% and 22.2% respectively. Conclusions The temperature in the middle of the classroom in the non centralized heating area is lower than the standard, the relative humidity of classroom in the centralized heating area is lower than the standard，and the CO 2 in the classroom in winter is lower than the standard. It is recommended to install heating facilities in schools with low temperatures to increase the temperature and increase the frequency of ventilation in classrooms or adopt mechanical ventilation strategies to reduce CO 2 volume concentration.

Objective: To evaluate the classroom environmental management and CO 2 volume concentration in primary and secondary schools from Liaoning, Tianjin, and Shanghai, thereby providing a scientific basis for developing targeted strategies to improve classroom air quality. Methods: From December 16 to 26, 2024, by using stratified random cluster sampling method, the questionnaire survey was conducted in 72 primary and secondary schools (24 each of primary, junior high, and regular high schools) across Liaoning, Tianjin and Shanghai. Information on heating, ventilation and other classroom environmental management was collected. Additionally, 108 classrooms were selected for on site microclimate measurements, including temperature, humidity, wind speed and CO 2 volume concentration. Univariate analysis and multiple linear regression models were employed to explore related factors of classroom CO 2 volume concentration. Results: Among the three provinces/municipalities, 20.8% of schools regularly monitored the microclimate. The overall compliance rate for classroom CO 2 volume concentration was 17.6%. Multiple linear regression analysis showed that CO 2 volume concentration in regular and junior high school classrooms were higher than in primary school classrooms ( β=0.067, 0.046, 95%CI =0.036-0.099, 0.013-0.080); classrooms ventilated regularly in the morning and afternoon had higher CO 2 volume concentration than those ventilated during every break between classes ( β=0.043, 95%CI = 0.007- 0.080); both temperature ( β=0.010, 95%CI =0.004-0.016) and humidity ( β=0.003, 95%CI =0.002-0.004) were positively correlated with CO 2 volume concentration (all P <0.05). Conclusions Excessive CO 2 volume concentration in primary and secondary school classrooms is a prominent issue, and ventilation frequency is a key intervenable factor for controlling CO 2 levels. It is recommended to promote ventilation during every break between classes as a core management measure and to emphasize air quality supervision in regular high school classrooms.

Objective: To evaluate the current situation of thermal environment in primary and secondary school classrooms during winter, and to analyze students thermal comfort needs, so as to provide a basis for improving classroom thermal environment. Methods: From December 16 to 26, 2024, a stratified cluster random sampling method was used to select 90 classrooms from 15 primary and secondary schools in centralized/air conditioned heating areas(Liaoning Province, Tianjin City, Shanghai City) and naturally ventilated areas(Anhui Province and Jiangxi Province)for on site environmental measurement. A questionnaire survey was conducted among 743 students. The differences between groups using the χ 2 test were compared. Based on actual measurement data, a predicted mean vote prepared percentage of dissatisfied (PMV-PPD) model for centralized/air conditioned classrooms and an adaptive model for naturally ventilated classrooms were established, and the thermal neutral temperature and comfort interval were calculated. Results: The average outdoor temperature during on site measurement was 4.00(0.20，7.00)℃. In classrooms with centralized or air conditioned heating systems, the measured average temperature was (19.33±2.59)℃, with a thermal comfort range of 20.35-25.35 ℃ and a thermal neutral temperature of 22.85 ℃. And 13.92% of students reported feeling cold, while 80.80% felt comfortable. In classrooms with natural ventilation, the measured average temperature was (12.26±1.83)℃, with a thermal neutral temperature of 19.67 ℃ and a thermal comfort range of 16.17-23.17 ℃. About 48.33% of students reported feeling cold, and 49.81 % felt comfortable.The results of univariate analysis showed that there were statistically significant differences in shoe thickness, temperature sensation, relative humidity sensation and wind speed sensation between centralized/air conditioned heating areas ( χ 2= 7.01 , 31.47, 13.57, 13.80,all P <0.05). There were also statistically significant differences in school stage for primary and secondary school students, body mass index, classroom location for seat, temperature sensation, relative humidity sensation and wind speed sensation between naturally ventilated areas ( χ 2=42.13, 11.13, 11.04, 60.39, 29.27, 38.46,all P <0.05). Conclusions There are differences in thermal environment and students subjective thermal comfort in primary and secondary schools under different ventilation modes in winter. The temperature standards for heated classrooms should be revised, and differentiated environmental regulation strategies should be adopted based on different ventilation methods to improve students health and comfort levels.

ObjectiveTo identify the pathogen species responsible for the wilt disease of Tetradium ruticarpum in Chongqing， investigate there biological characteristics， and screen effective fungicides， so as to provide a theoretical basis for disease control in production. MethodsThe pathogen was isolated via the tissue culture method. Pathogenicity was verified according to Koch's postulates. The pathogen was identified based on morphological characteristics and multi-gene phylogenetic analysis. The mycelial growth rate method was used for biological characterization of the pathogen and fungicide screening. ResultsThe pathogen colonies were nearly circular with irregular edges， white， short， velvety aerial hyphae， and pale purple undersides. Macroconidia were colorless， sickle-shaped， with 3-5 septa， while microconidia were transparent， elliptical， aseptate or with 1-2 septa. Multi-gene phylogenetic analysis showed that the pathogen clustered in the same clade as Fusarium fujikuroi with 100% support， which， combined with morphological characteristics， identified the pathogen causing wilt of T. ruticarpum in Chongqing as F. fujikuroi. The optimal conditions for the mycelial growth of F. fujikuroi were mung bean agar （MBA） with glucose as the carbon source， beef extract and yeast powder as nitrogen sources， 28 ℃， pH 7.0， and alternating light/dark conditions. The optimal conditions for sporulation were potato dextrose agar （PDA） with glucose as the carbon source， beef extract as the nitrogen source， 28 ℃， pH 7.0， and complete darkness. Among chemical fungicides， phenazine-1-carboxylic acid exhibited the strongest inhibitory effect on F. fujikuroi. Shenqinmycin and tetramycin were the most effective bio-fungicides. ConclusionThis study is the first to report F. fujikuroi as the causal agent of wilt disease in T. rutaecarpa. The chemical fungicide phenazine-1-carboxylic acid and the bio-fungicides shenqinmycin and tetramycin showed strong inhibitory effects against F. fujikuroi.

Objective To explore the relationship between uric acid, visceral fat thickness and insulin resistance in elderly patients with hypertriglyceridemia (HTG). Methods A total of 347 elderly patients with HTG admitted to the hospital from January 2021 to January 2025 were retrospectively selected, and the related factors of insulin resistance in elderly HTG were analyzed. Results Among the 347 elderly patients with HTG, 218 cases had insulin resistance and 129 cases did not develop insulin resistance, and were included in the insulin resistance group (n=218) and the non-insulin resistance group (n=129) respectively. Compared with the non-insulin resistance group, patients in the insulin resistance group had higher proportions of severe HTG and concurrent fatty liver, higher levels of IL-6, TNF- α, FFA and uric acid, and thicker visceral fat thickness (P<0.05). After logistic regression analysis, it was found that the related factors for insulin resistance in elderly patients with HTG included the severity of HTG, IL-6, FFA, uric acid, and visceral fat thickness (P<0.05). Conclusion The severity of HTG, IL-6, FFA, uric acid, and visceral fat thickness are related to insulin resistance in elderly HTG patients. Clinically, it is necessary to pay attention to targeted interventions for uric acid control and visceral fat reduction in elderly patients with HTG so as to improve the insulin resistance status.

ObjectiveTo investigate the therapeutic mechanism of Xuefu Zhuyutang （XFZYT） for metabolic-associated fatty liver disease （MAFLD） through integrated network pharmacology and animal experiments. MethodsNetwork pharmacology was utilized to predict the core components， key therapeutic targets， and signaling pathways of XFZYT in the treatment of MAFLD. For animal experiments， a rat model of MAFLD was established by feeding a high-cholesterol diet for 4 weeks. Intervention was then administered with low-dose （2 g·kg^-1） and high-dose （4 g·kg^-1） XFZYT for 2 weeks. Biochemical assays were performed to measure the serum levels of aspartate aminotransferase （AST）， alanine aminotransferase （ALT）， total cholesterol （TC）， triglycerides （TG）， high-density lipoprotein （HDL）， and low-density lipoprotein （LDL）. In addition， the activities of superoxide dismutase （SOD） and catalase （CAT） and levels of malondialdehyde （MDA） and glutathione （GSH） in the serum were measured. The same way was adopted to measure the levels of TC and TG in the liver tissue. Enzyme-linked immunosorbent assay （ELISA） was employed to quantify the serum levels of interleukin （IL）-6， IL-1β， and tumor necrosis factor-alpha （TNF-α）. Histopathological evaluations included hematoxylin and eosin （HE） staining for liver tissue morphology， Oil Red O staining for lipid deposition， and dihydroethidium （DHE） probe staining for reactive oxygen species （ROS） levels. Western blot analysis was conducted to assess the protein levels of AMP-activated protein kinase （AMPK）， phosphorylated （p）-AMPK， nuclear factor erythroid 2-related factor 2 （Nrf2）， heme oxygenase-1 （HO-1）， nuclear factor-kappa B （NF-κB）， and p-NF-κB in the liver tissue. Untargeted metabolomics analysis of the serum was performed by liquid chromatography-tandem mass spectrometry （LC-MS/MS）. ResultsNetwork pharmacology analysis predicted 155 potential targets of XFZYT for MAFLD treatment， with core targets including signal transducer and activator of transcription 3 （STAT3）， protein kinase B1 （Akt1）， TNF， and IL-6. Kyoto Encyclopedia of Genes and Genomes （KEGG） pathway enrichment primarily implicated the AMPK signaling pathway. Animal experiments demonstrated that compared with the normal group， the model group exhibited dyslipidemia， hepatic function impairment， pronounced hepatic lipid deposition， and inflammatory manifestations， with elevated serum levels of AST， ALT， TC， TG， LDL， and MDA （P<0.05）， reduced HDL and GSH levels plus decreased SOD and CAT activities （P<0.05）， downregulated protein levels of Nrf2， HO-1， and p-AMPK （P<0.05）， and upregulated protein level of p-NF-κB （P<0.05） in the liver tissue. Compared with the model group， XFZYT intervention groups showed significant amelioration of dyslipidemia and hepatic function impairment， markedly reduced hepatic lipid deposition and inflammatory cell infiltration， decreased serum levels of AST， ALT， TC， TG， LDL， and MDA （P<0.05）， increased HDL and GSH levels plus enhanced SOD and CAT activities （P<0.05）， upregulated protein levels of Nrf2， HO-1， and p-AMPK （P<0.05）， and downregulated protein level of p-NF-κB （P<0.05）. Serum metabolomics revealed 511 differentially expressed metabolites （231 upregulated and 280 downregulated） between normal and model groups， while XFZYT groups versus model group showed 94 differential metabolites （51 upregulated and 43 downregulated）. Among them， 11 metabolites displayed the most significant alterations， with enriched pathways including glycerolipid metabolism， cholesterol metabolism， and insulin resistance， multiple of which demonstrated AMPK association. ConclusionXFZYT alleviates MAFLD by regulating the AMPK signaling pathway and associated metabolic networks.

Chinese hamster ovary (CHO) cells are the most established and versatile mammalian expression system for the large-scale production of recombinant therapeutic proteins, owing to their genetic stability, adaptability to serum-free suspension culture, and ability to perform human-like post-translational modifications. More than 70% of biologics approved by the U.S. Food and Drug Administration rely on CHO-based production platforms, underscoring their central role in modern biopharmaceutical manufacturing. Despite these advantages, CHO systems continue to face three persistent bottlenecks that limit their potential for high-yield, reproducible, and cost-efficient production: excessive metabolic burden during high-density culture, heterogeneity of glycosylation patterns, and progressive loss of long-term expression stability. This review provides an integrated analysis of recent advances addressing these challenges and proposes a forward-looking framework for constructing intelligent and sustainable CHO cell factories. In terms of metabolic regulation, excessive lactate and ammonia accumulation disrupts energy balance and reduces recombinant protein synthesis efficiency. Optimization of culture parameters such as temperature, pH, dissolved oxygen, osmolarity, and glucose feeding can effectively alleviate metabolic stress, while supplementation with modulators including sodium butyrate, baicalein, and S-adenosylmethionine promotes specific productivity (qP) by modulating apoptosis and chromatin structure. Furthermore, genetic engineering strategies—such as overexpression of MPC1/2, HSP27, and SIRT6 or knockout of Bax, Apaf1, and IGF-1R—have demonstrated significant improvements in cell viability and product yield. The combination of multi-omics metabolic modeling with artificial intelligence (AI)-based prediction offers new opportunities for building self-regulating CHO systems capable of dynamic adaptation to environmental stress. Regarding glycosylation uniformity, which determines therapeutic efficacy and immunogenicity, gene editing-based glycoengineering (e.g., FUT8 knockdown or ST6Gal1 overexpression) has enabled the humanization of CHO glycan profiles, minimizing non-human sugar residues and enhancing drug stability. Process-level strategies such as galactose or manganese co-feeding and fine control of temperature or osmolarity further allow rational regulation of glycosyltransferase activity. Additionally, in vitro chemoenzymatic remodeling provides a complementary route to construct human-type glycans with defined structures, though industrial applications remain constrained by cost and scalability. The integration of model-driven process design and AI feedback control is expected to enable real-time prediction and correction of glycosylation deviations, ensuring batch-to-batch consistency in continuous biomanufacturing. Long-term expression stability, another critical challenge, is often impaired by promoter silencing, chromatin condensation, and random genomic integration. Molecular optimization—such as the use of improved promoters (CMV, EF-1α, or CHO endogenous promoters), Kozak and signal peptide refinement, and incorporation of chromatin-opening elements (UCOE, MAR, STAR)—helps maintain durable transcriptional activity, while site-specific integration systems including Cre/loxP, Flp/FRT, φC31, and CRISPR/Cas9 can enable single-copy, position-independent gene insertion at genomic safe-harbor loci, ensuring stable, predictable expression. Collectively, this review highlights a paradigm shift in CHO system optimization driven by the convergence of genome editing, synthetic biology, and artificial intelligence. The transition from empirical optimization to rational, data-driven design will facilitate the development of programmable CHO platforms capable of autonomous regulation of metabolic flux, glycosylation fidelity, and transcriptional activity. Such intelligent cell factories are expected to accelerate the transformation from laboratory-scale research to industrial-scale, high-consistency, and economically sustainable biopharmaceutical manufacturing, thereby supporting the next generation of efficient and customizable biologics manufacturing.

ObjectiveThe most prevalent mRNA modification, N6-methyladenosine (m⁶A) plays an important role in various RNA metabolism, including gene expression and translation. By recruiting different “reader” proteins and their cofactors, m⁶A modification can affect messenger RNA (mRNA) degradation, splicing, nuclear export and translation. However, the selective mechanism by which m⁶A sites regulate mRNA translation through m⁶A reader YTHDF1 binding remains poorly understood, due to a lack of computational methods for identifying context-specific m⁶A sites that regulate translation. To address this, we developed a novel computational framework named m⁶ATEpre, the first tool designed to predict cell-specific m⁶A sites that regulate translation efficiency. Methodsm⁶ATEpre integrates multi-omics data, introduces a novel feature representation strategy for m⁶A site sequences, and employs an autoencoder to effectively capture embedded feature representations. Specifically, m⁶ATEpre first integrated MeRIP-seq data and PAR-CLIP data through overlapping m⁶A sites with YTHDF1 binding sites and identified YTHDF1-mediated m⁶A sites. Then, m⁶ATEpre detected the translation gene by analyzing the Ribo-seq data under YTHDF1 knockdown vs control condition. Genes whose translation is mediated by YTHDF1 in an m⁶A-dependent manner were identified by a significant decrease in translation efficiency upon YTHDF1 knockdown. Next, we proposed a binary vector indicating the presence or absence of YTHDF1 binding motifs to characterize each m⁶A site sequence. This represents a novel feature representation strategy for m⁶A sites. m⁶ATEpre utilized the autoencoder to extract the potentially important feature representations and constructed a multilayer perceptron neural networks model to predict potential m⁶A sites that regulating translation efficiency. ResultsA comprehensive evaluation of m⁶ATEpre was conducted through a series of experiments. We compared its performance against that of a similar prediction task model, as well as other classifiers. The results indicate that m⁶ATEpre achieved the best prediction performance. In addition, we analyzed different feature representation strategies and performed ablation experiments to validate the rationality of the model design. The results demonstrate that our proposed feature representation strategy has a greater advantage in improving prediction performance. In the HeLa cell line, bioinformatic analysis of the metagene distribution and sequence minimum free energy of m⁶A sites regulating translation efficiency (m⁶A-reg-TE sites) revealed their specific properties in translation regulation. Functional enrichment analysis indicated that m⁶A-reg-TE genes are associated with specific biological processes and KEGG pathways. By integrating the binding sites of YTHDF1 co-factors with m⁶A-reg-TE sites, we revealed that YTHDF1-mediated and m⁶A-dependent translation efficiency regulation requires the cooperation of multiple translation-regulatory RNA-binding proteins among its co-factors in the HeLa cell line. Furthermore, we extended our predictions to the dataset of the HEK293T cell line. Similarly, bioinformatic analysis of the metagene distribution and functional enrichment revealed the cell-specific characteristic of these predicted m⁶A-reg-TE sites in HEK293T cells. Likewise, integrated analysis of multiple YTHDF1 co-factors and m⁶A-reg-TE sites predicted in the HEK293T cell line reveals their m⁶A-dependent cooperation in regulating translation efficiency. Conclusionm⁶ATEpre is a timely tool that will advance our understanding of the mechanisms of m⁶A regulation in translation efficiency. The source code and datasets used in this work can be downloaded from https://www.scidb.cn/s/bAZZFr.