OBJECTIVE To investigate the effect of Huangqin decoction （HQD）-based self-assembled nanoparticles （SAN） co-loaded with terbinafine （TBF） （TBF-HQD-SAN NPs） on the transdermal absorption of TBF. METHODS High-speed centrifugation combined with dialysis was used to separate HQD-SAN， and TBF-HQD-SAN NPs were obtained by loading TBF using the ultrasound magnetic stirring method； the particle size distribution， Zeta potential and polydispersity index （PDI） of the nanoparticle were characterized， and the encapsulation efficiency （EE） and drug loading （DL） of TBF were determined； using in vitro and in vivo transdermal experiments， the differences in transdermal performance between TBF-HQD-SAN NPs and TBF raw materials， as well as TBF and HQD-SAN physical mixture （TBF-HQD-SAN PM）， were compared and analyzed. RESULTS TBF- HQD-SAN NPs were spherical with a particle size of （177.60±2.57） nm， a PDI of 0.197 4±0.007 9， and a Zeta potential of （－14.63±0.85） mV. The EE and DL of TBF were （99.49±0.71）% and （3.22±0.10）% ， respectively. In vitro transdermal experiments， compared with TBF raw materials， the steady-state permeation rate （Jss） and skin retention of TBF-HQD-SAN NPs increased by 3.34 times and 27.56 times， respectively （P＜0.05）； compared with TBF-HQD-SAN PM， its Jss and skinretention were increased by 2.04 times and 7.44 times， respectively （P＜0.05）. In vivo transdermal experiments 69号） showed that， the area under the drug-time curve and the maximum concentration of TBF-HQD-SAN NPs increased by 2.13 times and 2.06 times respectively compared to TBF raw materials， and increased by 1.59 times and 1.65 times respectively compared to TBF-HQD-SAN PM （P＜0.05）. CONCLUSIONS TBF-HQD-SAN NPs can significantly enhance the in vitro and in vivo transdermal absorption efficiency and skin retention of TBF.

Objective: To analyze the trend in burden of rheumatoid arthritis (RA) in China from 1990 to 2021, so as to provide insights into reducing the RA burden in China. Methods: Data of Global Burden of Disease Study 2021 were collected, and the incidence, mortality and disability-adjusted life years (DALY) of RA in China from 1990 to 2021 were analyzed and compared with global and different Socio-demographic Index (SDI) regions. The trend in burden of RA was analyzed using average annual percent change (AAPC). Results: The crude incidence rates of RA in China increased from 10.87/105 in 1990 to 17.38/105 in 2021, the crude mortality rates increased from 0.41/105 to 0.72/105, and the crude DALY rates increased from 34.26/105 to 58.61/105, with the increases of 59.98%, 77.95% and 71.06%, respectively. From 1990 to 2021, the standardized incidence rates of RA in China showed an increasing trend (AAPC=0.545%, P<0.05), the standardized mortality rates showed a decreasing trend (AAPC=-0.783%, P<0.05), and the standardized DALY rates showed no significant trend (AAPC=-0.017%, P>0.05). In 2021, the standardized incidence rate, standardized mortality rate and standardized DALY rate of RA were higher in females than in males; from 1990 to 2021, the standardized DALY rates of RA showed a decreasing trend in females (AAPC=-0.200%, P<0.05) and an increasing trend in males (AAPC=0.316%, P<0.05). The crude incidence rates of RA first increased and then decreased with age in 2021, reaching the highest in the age group of 75-<80 years at 34.36/105. Both the crude mortality rates and the crude DALY rates increased with age, reaching the highest in the age group of 95 years and older at 26.72/105 and 285.67/105, respectively. The standardized incidence rates and standardized DALY rates of RA in China in 2021 were lower than those in high SDI regions, while the standardized mortality rate was lower than that in medium-low SDI regions. Conclusions The burden of RA in China from 1990 to 2021 showed an upward trend, and was at a high level compared to different SDI regions. Higher disease burden of RA was seen in females and the elderly.

ObjectiveTo analyze the etiological characteristics of two strains of Escherichia albertii first identified in Baoshan District, Shanghai, in 2024, to explore their antibiotic resistance characteristics, virulence characteristics, and multilocus sequence typing (MLST) to elucidate their genetic evolutionary relationships, so as to provide a scientific basis for the surveillance and control of Escherichia albertii in the local area. MethodsA total of 457 anal swabs were collected from patients with diarrhea in 2024, from which two suspected Escherichia albertii strains were isolated. The isolated strains were identified through mass spectrograph analysis, biochemical identification, and polymerase chain reaction (PCR) test. Microdilution broth method was used for the antimicrobial susceptibility testing, and whole-genome sequencing was performed for molecular characteristic analysis. ResultsMass spectrograph analysis and PCR test initially identified the two strains as Escherichia coli (E. coli), but their biochemical profiles were inconsistent with those of E. coli. Genomic sequencing identified the strains as Escherichia albertii, and which were named as S1 and S2, respectively. The antimicrobial susceptibility test showed that both strains were susceptible to β‑lactam antibiotics and moderately susceptible to polypeptide antibiotics. S1 was resistant to chloramphenicol (CHL), streptomycin (STR), tetracyclin (TET), florfenicol (FFC) and nalidixic acid (NAL), and carried five resistance genes including APH（6），APH（3）， gyrA， tet and flor, whereas S2 was susceptible to the five antibiotics mentioned above. Neither of the two strains contained the stx virulence gene, but S2 harbored the astA virulence gene. The two Escherichia albertii strains had the MLST types of ST4638 and ST4606, respectively. The genome size of the two strains was 4.5 Mb, and the closest relative strain was GTC14781 (Escherichia albertii). The average nucleotide identity (ANI) values to the reference genome of E. coli were both below 90%. S1 did not have the H serotype defined in the current database. S1 and S2 differed by 28 267 single-nucleotide polymorphisms (SNPs), and no homologous strains were found in comparison with the data in the GeneBank database. ConclusionTwo strains of Escherichia albertii are initially identified in Baoshan District of Shanghai. Strain S1 shows strong multidrug resistance, while strain S2 carries diarrheagenic virulence genes. The two strains have a distant genetic relationship and exhibits a pattern of sporadic occurrence. It is recommended to utilize whole-genome sequencing technology to enhance the epidemiological surveillance and laboratory detection of Escherichia albertii.

OBJECTIVE: To assess the prognostic significance of plasma fibrinogen（FIB） levels in patients of diffuse large B-cell lymphoma(DLBCL). METHODS: We retrospectively analyzed 203 newly diagnosed with DLBCL patients who met the study requirements from November 2016 to May 2024. Based on the receiver operating characteristic (ROC) curve analysis of plasma FIB levels during diagnosis, the critical value of FIB was determined, and patients were divided into high FIB and low FIB groups. The clinical characteristics and relevant laboratory indicators of two groups were compared. The impact of plasma FIB levels on overall survival (OS) were evaluated using Kaplan-Meier curves as well as univariate and multivariate Cox regression analysis. The differences in FIB and other laboratory indicators under different disease states were compared. RESULTS: According to the ROC curve, the optimal cut-off value of FIB was 3.49 g/L. Compared with the high FIB group (>3.49 g/L), the low FIB group (≤3.49 g/L) had a significant decrease in neutrophil count (ANC) (P =0.001) and platelet count (PLT) (P =0.027), and a significant increase in prealbumin (PA) (P =0.001). A high FIB level was associated with decreased OS (P =0.005). Univariate analysis results showed that FIB had an impact on survival of patients(HR＝2.031，95%CI : 1.221-3.375, P =0.006). Multivariate analysis showed that higher FIB level was an independent adverse prognostic factor affecting patients survival （HR＝2.684， 95%CI :1.478-4.875, P =0.001）. Compared with patients with newly diagnosed or recurrent DLBCL, patients with complete remission showed a significant decrease in FIB (P _ND < 0.001, P _R=0.001) and ANC (P _ND < 0.001, P _R=0.021), as well as an increase in albumin (ALB) (P _ND < 0.001, P _R=0.018) and PA (P _ND < 0.001, P _R < 0.001). CONCLUSION Elevated FIB is a poor prognostic factor for DLBCL patients. The plasma FIB level is correlated with laboratory indicators such as ANC, PLT, PA, and disease status in DLBCL patients. Dynamic monitoring can assist in the early detection of changes in the condition.
Humans ; Lymphoma, Large B-Cell, Diffuse/diagnosis* ; Fibrinogen/metabolism* ; Prognosis ; Retrospective Studies ; Male ; Female ; ROC Curve ; Middle Aged ; Aged ; Adult

This case report presents a 16-year-old male patient with deficiency of adenosine deaminase 2(DADA2). The patient had a history of Raynaud′s phenomenon with digital ulcers since childhood. As the disease progressed, the patient developed retinal vasculitis, intracranial hemorrhage, skin necrosis, severe malnutrition, refractory hypertension, and gastrointestinal bleeding. Genetic testing revealed compound heterozygous mutations in the ADA2 gene (paternal c.1072G > A pathogenic mutation + maternal c.1065C > A variant of unknown clinical significance). ADA2 enzyme activity was significantly reduced (0.1 U/L). A multidisciplinary treatment team developed an individualized plan to address key issues, including nutritional support, blood pressure control, rehabilitation, pain management, and balancing anticoagulation/bleeding risks. After systematic intervention, the patient′s condition showed partial improvement. This case reveals clinical challenges such as anticoagulation decisions and nutritional support of DADA2. It also emphasizes the importance of early molecular diagnosis, tumor necrosis factor-α inhibitor targeted therapy, and multidisciplinary collaboration in management, underlining the core value of precision medicine in rare disease management.

Autoinflammatory diseases (AIDs) are characterized by abnormal activation of the innate immune system. Schnitzler syndrome, SAPHO (synovitis, acne, pustulosis, hyperostosis, and osteitis) syndrome, Yao syndrome, and PFAPA (periodic fever, aphthous stomatitis, pharyngitis, and adenitis) syndrome are rare polygenic AIDs. Although these diseases differ in etiology and pathogenesis, they all present with complex nonspecific clinical symptoms, such as periodic fever, inflammatory lesions of bones or skin, which makes diagnosis challenging and often leads to delayed treatment or even misdiagnosis. In recent years, rapid advances in molecular biology and genomics have gradually elucidated the pathogenesis of these rare diseases, offering new insights for optimizing diagnosis and treatment. This review summarizes the progress in the pathogenesis, clinical manifestations, diagnosis, and treatment of these rare polygenic AIDs, aiming to provide references for further refining management strategies for such diseases.

Animal experiments are widely used in biomedical research for safety assessment, toxicological analysis, efficacy evaluation, and mechanism exploration. In recent years, the ethical review system has become more stringent, and awareness of animal welfare has continuously increased. To promote more efficient and cost-effective drug research and development, the United States passed the Food and Drug Administration (FDA) Modernization Act 2.0 in September 2022, which removed the federal mandate requiring animal testing in preclinical drug research. In April 2025, the FDA further proposed to adopt a series of "new alternative methods" in the research and development of drugs such as monoclonal antibodies, which included artificial intelligence computing models, organoid toxicity tests, and 3D micro-physiological systems, thereby gradually phasing out traditional animal experiment models. Among these cutting-edge technologies, 3D bioprinting models are a significant alternative and complement to animal models, owing to their high biomimetic properties, reproducibility, and scalability. This review provides a comprehensive overview of advancements and applications of 3D bioprinting technology in the fields of biomedical and pharmaceutical research. It starts by detailing the essential elements of 3D bioprinting, including the selection and functional design of biomaterials, along with an explanation of the principles and characteristics of various printing strategies, highlighting the advantages in constructing complex multicellular spatial structures, regulating microenvironments, and guiding cell fate. It then discusses the typical applications of 3D bioprinting in drug research and development,including high-throughput screening of drug efficacy by constructing disease models such as tumors, infectious diseases, and rare diseases, as well as conducting drug toxicology research by building organ-specific models such as those of liver and heart. Additionally,the review examines the role of 3D bioprinting in tissue engineering, discussing its contributions to the construction of functional tissues such as bone, cartilage, skin, and blood vessels, as well as the latest progress in regeneration and replacement. Furthermore, this review analyzes the complementary advantages of 3D bioprinting models and animal models in the research of disease progression, drug mechanisms, precision medicine, drug development, and tissue regeneration, and discusses the potential and challenges of their integration in improving model accuracy and physiological relevance. In conclusion, as a cutting-edge in vitro modeling and manufacturing technology, 3D bioprinting is gradually establishing a comprehensive application system covering disease modeling, drug screening, toxicity prediction, and tissue regeneration.

Animal experiments are widely used in biomedical research for safety assessment, toxicological analysis, efficacy evaluation, and mechanism exploration. In recent years, the ethical review system has become more stringent, and awareness of animal welfare has continuously increased. To promote more efficient and cost-effective drug research and development, the United States passed the Food and Drug Administration (FDA) Modernization Act 2.0 in September 2022, which removed the federal mandate requiring animal testing in preclinical drug research. In April 2025, the FDA further proposed to adopt a series of "new alternative methods" in the research and development of drugs such as monoclonal antibodies, which included artificial intelligence computing models, organoid toxicity tests, and 3D micro-physiological systems, thereby gradually phasing out traditional animal experiment models. Among these cutting-edge technologies, 3D bioprinting models are a significant alternative and complement to animal models, owing to their high biomimetic properties, reproducibility, and scalability. This review provides a comprehensive overview of advancements and applications of 3D bioprinting technology in the fields of biomedical and pharmaceutical research. It starts by detailing the essential elements of 3D bioprinting, including the selection and functional design of biomaterials, along with an explanation of the principles and characteristics of various printing strategies, highlighting the advantages in constructing complex multicellular spatial structures, regulating microenvironments, and guiding cell fate. It then discusses the typical applications of 3D bioprinting in drug research and development,including high-throughput screening of drug efficacy by constructing disease models such as tumors, infectious diseases, and rare diseases, as well as conducting drug toxicology research by building organ-specific models such as those of liver and heart. Additionally,the review examines the role of 3D bioprinting in tissue engineering, discussing its contributions to the construction of functional tissues such as bone, cartilage, skin, and blood vessels, as well as the latest progress in regeneration and replacement. Furthermore, this review analyzes the complementary advantages of 3D bioprinting models and animal models in the research of disease progression, drug mechanisms, precision medicine, drug development, and tissue regeneration, and discusses the potential and challenges of their integration in improving model accuracy and physiological relevance. In conclusion, as a cutting-edge in vitro modeling and manufacturing technology, 3D bioprinting is gradually establishing a comprehensive application system covering disease modeling, drug screening, toxicity prediction, and tissue regeneration.

ObjectiveTo analyze the drug resistance and the molecular typing characteristics through pulsed field gel electrophoresis (PFGE) of Campylobacter spp. isolated from patients with infectious diarrhea in Baoshan District of Shanghai, and to provide a basis for Campylobacter spp. prevention and control and clinical medication. MethodsCampylobacter spp. was isolated, cultured and identified from stool samples of diarrheal patients collected from medical institutions at two monitoring sites in Baoshan District from 2019 to 2022. Antimicrobial susceptibility testing for 12 antibiotics was conducted on the isolated Campylobacter jejuni (C. jejuni) and Campylobacter. Coli (C. coli), and molecular typing was performed using PFGE. ResultsA total of 179 strains of Campylobacter spp. were isolated from 1 786 samples of diarrheal patients, with a positive rate of 10.02%. The highest resistance rate of C. jejuni was to ciprofloxacin (98.63%), followed by tetracycline (97.26%) and nalidixic acid (89.73%). C. coli was completely resistant to ciprofloxacin and nalidixic acid (100.00%), followed by tetracycline (90.91%). The multidrug resistance rates of C. jejuni and C. coli were 89.73% and 100.00%, respectively. 142 strains of C. jejuni produced 122 PFGE bands, while 33 strains of C. coli produced 33 PFGE bands, and the distribution of the bands was relatively dispersed. ConclusionFrom 2019 to 2022, the detection rate of Campylobacter in diarrheal patients was relatively high in Baoshan District of Shanghai, the multidrug resistance rate of Campylobacter isolates from diarrheal patients was relatively serious, in addition, the drug resistance pattern was complex, and the PFGE band pattern displayed a polymorphic distribution.