Purpose: This study aimed to validate pivotal pre-test probability (PTP)-coronary artery disease (CAD) models (CAD consortium model and IJC-CAD model). Materials and Methods: Traditional PTP models-CAD consortium models: two traditional PTP models were used under the CAD consortium framework, namely CAD1 and CAD2. Machine learning (ML)-based PTP models: two ML-based PTP models were derived from CAD1 and CAD2, and used to enhance predictive capabilities [ML-CAD2 and ML-IJC (IJC-CAD)]. The primary endpoint was obstructive CAD. The performance evaluation of these PTP models was conducted using receiver-operating characteristic analysis. Results: The study included 238 participants, among whom 157 individuals (65.9% of the total sample) had CAD. The IJC-CAD model demonstrated the highest performance with an area under the curve (AUC) of 0.860 [95% confidence interval (CI): 0.812– 0.909]. Following this, the ML-CAD2 model exhibited an AUC of 0.814 (95% CI: 0.758–0.870), CAD1 showed an AUC of 0.767 (95% CI: 0.705–0.830), and CAD2 had an AUC of 0.785 (95% CI: 0.726–0.845). Each of the PTP models was adjusted to have a CAD score cutoff that classified cases with a sensitivity of over 95%. The respective cutoff values were as follows: CAD1 and CAD2 >12, MLCAD2 >0.380, and IJC-CAD >0.367. All PTP models achieved a CAD sensitivity of over 95%. Similar to the AUC performance, the accuracy of the PTP models was highest for IJC-CAD, reaching 80.3%. The accuracy of ML-CAD2 was 77.7%, while that for CAD1 and CAD2 was 74.8% and 75.2%, respectively. Conclusion ML-CAD2 and IJC-CAD showed superior performance compared to traditional existing models (CAD1 and CAD2)

Purpose: We investigated the clinical features, current negative-pressure wound therapy (NPWT) management strategies, and outcomes of pelvic-perineal soft tissue infection after open pelvic fractures. Materials and Methods: We analyzed the data of patients admitted to our trauma center with pelvic-perineal soft tissue after open pelvic fractures over a 7-year period. We investigated the injury severity score (ISS), medical costs, number of NPWTs, time required to reach definite wound coverage, complications, fracture classifications, transfusion requirements, interventions, length of stay (LOS) in hospital and intensive care unit (ICU), and prognosis. Results: Twenty patients with open pelvic fractures were treated with NPWT, and one patient who underwent NPWT died of pelvic sepsis during ICU treatment. The median LOS in hospital and medical costs were 98 [56–164] days and 106400 [65600–171100] USD, respectively. Patients treated with instillation NPWT (iNPWT, n=10) had a shorter NPWT duration (24 [13–39] vs. 46 [42–91] days, p=0.023), time to definite wound coverage (30 [21–43] vs. 49 [42–93] days, p=0.026), and hospital LOS (56 [43–72] vs. 158 [101–192] days, p=0.001), as well as lower medical costs (67800 [42500–102500] vs. 144200 [110400–236000] USD, p=0.009) compared to those treated with conventional NPWT. Conclusion NPWT is a feasible method for treating pelvic soft tissue infections in patients with open pelvic fractures. iNPWT can reduce the duration of NPWT, hospital LOS, and medical costs.

Purpose: This study focused on analyzing the contact pressure and area on different patellar component designs in total knee arthroplasty (TKA) to evaluate biomechanics related to the patellofemoral (PF) joint. Materials and Methods: The patellar components studied included the dome design, modified dome design, and anatomical design implants. Using finite element analysis and mechanical testing, the pressure and area were evaluated. The first loading condition was simulated at flexion angles of 0°, 15°, 45°, 90°, 120°, and 150°. The second loading condition was simulated for a clinically relevant scenario, involving a 2-mm medial shift at a flexion angle of 45°. Results: For both the modified dome and anatomical designs, the contact area and pressure increased with the flexion angle. The dome design reached its maximum contact area at a flexion angle of 120°. Among the designs, the anatomical design had the largest contact area and a lower contact pressure compared to the dome and modified dome designs. However, when a medial shift of 2 mm was simulated at a 45° flexion angle, which can occur clinically, the anatomical design showed edge contact, leading to higher contact pressure and reduced contact area. In contrast, the modified dome design demonstrated the lowest contact pressure and the greatest contact area under the same shifted conditions. Conclusion These findings suggest that the design of the patellar component significantly affects patellar biomechanics and stability. Specifically, the modified dome design showed improved biomechanical effects in clinically relevant scenarios. Therefore, patellar components with a modified dome design are expected to better manage PF joint pain and reduce complications in TKA.

Purpose: Adjuvant treatment for craniopharyngioma after surgery is controversial. Adjuvant external beam radiation therapy (EBRT) can increase the risk of long-term sequelae. Stereotactic radiosurgery (SRS) is used to reduce treatment-related toxicity.In this study, we compared the treatment outcomes and toxicities of adjuvant therapies for craniopharyngioma. Materials and Methods: We analyzed patients who underwent craniopharyngioma tumor removal between 2000 and 2017. Of the 153 patients, 27 and 20 received adjuvant fractionated EBRT and SRS, respectively. We compared the local control (LC), progression-free survival (PFS), and overall survival between groups that received adjuvant fractionated EBRT, SRS, and surveillance. Results: The median follow-up period was 77.7 months. For SRS and surveillance, the 10-year LC was 57.2% and 57.4%, respectively. No local progression was observed after adjuvant fractionated EBRT. One patient in the adjuvant fractionated EBRT group died owing to glioma 94 months after receiving radiotherapy (10-year PFS: 80%). The 10-year PFS was 43.6% and 50.7% in the SRS and surveillance groups, respectively. The treatment outcomes significantly differed according to adjuvant treatment in nongross total resection (GTR) patients. Additional treatment-related toxicity was comparable in the adjuvant fractionated EBRT and other groups. Conclusion Adjuvant fractionated EBRT could be effective in controlling local failure, especially in patients with non-GTR, while maintaining acceptable treatment-related toxicity.

Background: Histone deacetylase 6 (HDAC6), belonging to class IIb of histone deacetylases, regulates theacetylation of the cytoplasmic protein α-tubulin. The overexpression of HDAC6 is linked to the development oftumors, and inhibiting HDAC6 is known to trigger apoptosis in multiple myeloma cells. In addition to its application in cancer treatment, bortezomib, a proteasome inhibitor, is widely used in managing multiple myeloma and has shown effectiveness in patients with both newly diagnosed and relapsed disease. However, the treatment regimen may be delayed or discontinued due to the risk of peripheral neuropathy, a significant non-hematologic side effect. Methods: Animal models of peripheral neuropathy induced by various anti-cancer drugs were established, confirming the potential of HDAC6 inhibitors as a treatment for this condition. Six- to eight-week-old male Sprague Dawley rats were utilized to create these models. Mechanical allodynia and electron microscopy served as indicators of peripheral neuropathy. The HDAC6 inhibitor CKD-011 was administered at doses of 5, 10, 20, and 40 mg/kg. Results: In an animal model of bortezomib-induced peripheral neuropathy, CKD-011, an HDAC6 inhibitor, effectively ameliorated peripheral neuropathy. Similarly, CKD-011 administration demonstrated recovery from peripheral neuropathy in models induced with oxaliplatin, paclitaxel, and cisplatin. Conclusions These findings suggest that HDAC6 inhibitors have the potential to mitigate peripheral neuropathy induced by chemotherapeutic agents.

Fine particulate matter (FPM) is a major component of air pollution and has emerged as a significant global health concern owing to its adverse health effects. Previous studies have investigated the correlation between bone health and FPM through cohort or review studies. However, the effects of FPM exposure on bone health are poorly understood. This study aimed to investigate the effects of FPM on bone health and elucidate these effects in vitro and in vivo using mice. Micro-CT analysis in vivo revealed FPM exposure decreased bone mineral density, trabecular bone volume/total volume ratio, and trabecular number in the femurs of mice, while increasing trabecular separation. Histological analysis showed that the FPM-treated group had a reduced trabecular area and an increased number of osteoclasts in the bone tissue. Moreover, in vitro studies revealed that low concentrations of FPM significantly enhanced osteoclast differentiation. These findings further support the notion that short-term FPM exposure negatively impacts bone health, providing a foundation for further research on this topic.

Background: Kelch-like ECH-associated protein 1 (KEAP1)–nuclear factor erythroid- 2-related factor 2 (NRF2) pathway is a major regulator protecting cells from oxidative and metabolic stress. Studies have revealed that this pathway is involved in mediating resistance to cytotoxic chemotherapy and immunotherapy; however, its implications in oncogene-addicted tumors are largely unknown. This study aimed to elucidate whether this pathway could be a potential therapeutic target for epidermal growth factor receptor (EGFR)-mutant non-small cell lung cancer. Methods: We measured the baseline expression of NRF2 using EGFR-mutant parental cells and acquired gefitinib resistant cells. We investigated whether NRF2 inhibition affected cell death in vitro and tumor growth in vivo using a xenograft mouse model, and compared the transcriptional changes before and after NRF2 inhibition. Results: Baseline NRF2 expression was enhanced in PC9 and PC9 with gefitinib resistance (PC9/GR) cells than in other cell lines, with a more prominent expression in PC9/ GR. The NRF2 inhibitor induced NRF2 downregulation and cell death in a dose-dependent manner. Cotreatment with an NRF2 inhibitor enhanced osimertinib-induced cell death in vitro, and potentiated tumor growth inhibition in a PC9/GR xenograft model. Finally, RNA sequencing revealed that NRF2 inhibition resulted in the altered expression of multiple genes involved in various signaling pathways. Conclusion We identified that NRF2 inhibition enhanced cell death and inhibited tumor growth in tyrosine kinase inhibitor (TKI)-resistant lung cancer with EGFR-mutation. Thus, NRF2 modulation may be a novel therapeutic strategy to overcome the resistance to EGFR-TKIs.

Purpose: This study aimed to validate pivotal pre-test probability (PTP)-coronary artery disease (CAD) models (CAD consortium model and IJC-CAD model). Materials and Methods: Traditional PTP models-CAD consortium models: two traditional PTP models were used under the CAD consortium framework, namely CAD1 and CAD2. Machine learning (ML)-based PTP models: two ML-based PTP models were derived from CAD1 and CAD2, and used to enhance predictive capabilities [ML-CAD2 and ML-IJC (IJC-CAD)]. The primary endpoint was obstructive CAD. The performance evaluation of these PTP models was conducted using receiver-operating characteristic analysis. Results: The study included 238 participants, among whom 157 individuals (65.9% of the total sample) had CAD. The IJC-CAD model demonstrated the highest performance with an area under the curve (AUC) of 0.860 [95% confidence interval (CI): 0.812– 0.909]. Following this, the ML-CAD2 model exhibited an AUC of 0.814 (95% CI: 0.758–0.870), CAD1 showed an AUC of 0.767 (95% CI: 0.705–0.830), and CAD2 had an AUC of 0.785 (95% CI: 0.726–0.845). Each of the PTP models was adjusted to have a CAD score cutoff that classified cases with a sensitivity of over 95%. The respective cutoff values were as follows: CAD1 and CAD2 >12, MLCAD2 >0.380, and IJC-CAD >0.367. All PTP models achieved a CAD sensitivity of over 95%. Similar to the AUC performance, the accuracy of the PTP models was highest for IJC-CAD, reaching 80.3%. The accuracy of ML-CAD2 was 77.7%, while that for CAD1 and CAD2 was 74.8% and 75.2%, respectively. Conclusion ML-CAD2 and IJC-CAD showed superior performance compared to traditional existing models (CAD1 and CAD2)

Purpose: We investigated the clinical features, current negative-pressure wound therapy (NPWT) management strategies, and outcomes of pelvic-perineal soft tissue infection after open pelvic fractures. Materials and Methods: We analyzed the data of patients admitted to our trauma center with pelvic-perineal soft tissue after open pelvic fractures over a 7-year period. We investigated the injury severity score (ISS), medical costs, number of NPWTs, time required to reach definite wound coverage, complications, fracture classifications, transfusion requirements, interventions, length of stay (LOS) in hospital and intensive care unit (ICU), and prognosis. Results: Twenty patients with open pelvic fractures were treated with NPWT, and one patient who underwent NPWT died of pelvic sepsis during ICU treatment. The median LOS in hospital and medical costs were 98 [56–164] days and 106400 [65600–171100] USD, respectively. Patients treated with instillation NPWT (iNPWT, n=10) had a shorter NPWT duration (24 [13–39] vs. 46 [42–91] days, p=0.023), time to definite wound coverage (30 [21–43] vs. 49 [42–93] days, p=0.026), and hospital LOS (56 [43–72] vs. 158 [101–192] days, p=0.001), as well as lower medical costs (67800 [42500–102500] vs. 144200 [110400–236000] USD, p=0.009) compared to those treated with conventional NPWT. Conclusion NPWT is a feasible method for treating pelvic soft tissue infections in patients with open pelvic fractures. iNPWT can reduce the duration of NPWT, hospital LOS, and medical costs.