This paper summarizes Professor DING Ying's clinical experience in the treatment of systemic lupus erythematosus （SLE） through differentiation of three states， yin fire， latent fire， and fire toxin. It is proposed that fire pathogenic factors constitute a key pathological element running throughout the entire disease course of SLE. The evolution of its pathogenesis centers on these three states， spleen-kidney deficiency with the initial emergence of yin fire as the onset of disease， damage to yin by medicinal toxicity with internal blazing of latent fire as the driver of disease progression， and the interlocking of blood stasis and heat with intense scorching by fire toxin as the critical factor leading to severe and life-threatening conditions. Corresponding to these three stages， targeted prescriptions are formulated， Jiuwei Yishen Formulation （九味益肾方） to tonify the spleen and kidney， raise yang， and disperse fire； Ziyin Xiehuo Decoction （滋阴泄火汤） to nourish yin and fluids while clearing latent fire； and Santeng Changluo Jiedu Decoction （三藤畅络解毒汤） to dispel blood stasis， unblock the collaterals， detoxify， and restrain fire. This staged and integrated therapeutic strategy aims to address both root and branch and to achieve overall regulation， providing valuable guidance for the clinical differentiation and treatment of SLE.

Objective To analyze the epidemiologic burden of colorectal cancer in Xishan District, Kunming City, Yunnan Province from 2018 to 2020. Methods Indicators of epidemiologic burden were calculated, including incidence rate, mortality rate, age-specific incidence/mortality rates, potential years of life lost (PYLL), and disability-adjusted life years (DALY) based on the National Disease Control and Prevention Center’s "Cancer Information Registration and Reporting System" and "Cause of Death Registration System". Results From 2018 to 2020, the ASR (China) for the incidence of colorectal cancer in Xishan District, Kunming City increased from 25.27/10⁵ to 26.29/10⁵, while the ASR (China) for mortality decreased from 17.11/10⁵ to 16.03/10⁵. The PYLL in 2018–2020 were 1399.63, 1376.78, and 1571.56 person-years, respectively, whereas the DALY in 2018–2020 were 1927.74, 1875.05, and 1945.17 person-years, respectively. The morbidity, mortality, PYLL, and DALY were generally higher in males than in females over 45 years of age. Conclusion Given the parallel trends of persistent incidence risk and steadily declining mortality for colorectal cancer in Xishan District, Kunming City, a three-tier prevention and control system centered on "lifestyle intervention–regular screening–positive case tracking" should be established, with a focus on covering high-risk populations, particularly males over 45 years of age.

BACKGROUND:At present,osteoarthritis has become a major disease affecting the quality of life of the elderly,and the therapeutic effect is poor,often focusing on preventing the disease process,and the pathogenesis of osteoarthritis is still not fully understood.Bioinformatics analysis was carried out to explore the main pathogenesis of osteoarthritis and related mechanisms of gene coding regulation. OBJECTIVE:To screen core differential genes with a major role in osteoarthritis by gene expression profiling. METHODS:Datasets were downloaded from the Gene Expression Omnibus(GEO):GSE114007,GSE117999,and GSE129147.Differential genes in the GSE114007 and GSE117999 data collections were screened using R software,performing differential genes to weighted gene co-expression network analysis.The module genes most relevant to osteoarthritis were selected to perform protein interaction analysis.Candidate core genes were selected using the cytocape software.The candidate core genes were subsequently subjected to least absolute shrinkage and selection operator regression and COX analysis to identify the core genes with a key role in osteoarthritis.The accuracy of the core genes was validated using an external dataset,GSE129147. RESULTS AND CONCLUSION:(1)A total of 477 differential genes were identified,265 differential genes associated with osteoarthritis were obtained by weighted gene co-expression network analysis,and 8 candidate core genes were identified.The least absolute shrinkage and selection operator regression analysis finally yielded a differential gene ASPM with core value that was externally validated.(2)It is concluded that abnormal gene ASPM expression screened by bioinformatics plays a key central role in osteoarthritis.

OBJECTIVE To provide a reference for the pharmaceutical care of a patient with type 2 diabetes mellitus （T2DM） and limb-girdle muscular dystrophy （LGMD） who developed euglycemic diabetic ketoacidosis （euDKA） after taking empagliflozin. METHODS Clinical pharmacists provided pharmaceutical care for a patient with T2DM and LGMD who developed euDKA after taking empagliflozin. According to the patient’s recent use of medications and his conditions， clinical pharmacists assessed the correlation between euDKA and empagliflozin as “very likely”. As to euDKA， clinical pharmacists suggested discontinuing empagliflozin and metformin， and giving intravenous infusion of 10% Glucose injection instead of 5% Glucose injection for fluid resuscitation. Clinical pharmacists monitored the patient’s laboratory indicators such as arterial blood gas analysis， blood/urine ketones and electrolytes. They assisted physicians to decide when to stop intravenous supplements of liquid and insulin. Clinical pharmacists also assisted physicians to adjust the antidiabetic drugs and educated the patient to avoid empagliflozin or other sodium- glucose linked transporter 2 inhibitors （SGLT2i）. RESULTS Physicians adopted the suggestions of clinical pharmacists. After treatment， the patient’s condition improved， and he was allowed to be discharged with medication. CONCLUSIONS euDKA is a relatively rare and serious adverse reaction associated with SGLT2i， and the patients with LGMD are susceptible to euDKA. Clinical pharmacists assist physicians in developing personalized medication plans by evaluating the association between euDKA and empagliflozin， adjusting medication regimens，conducting pharmaceutical monitoring，and other pharmaceutical services. Meanwhile， they provide medication education to patients to ensure their medication safety.

OBJECTIVE To provide a reference for the pharmaceutical care of a patient with type 2 diabetes mellitus （T2DM） and limb-girdle muscular dystrophy （LGMD） who developed euglycemic diabetic ketoacidosis （euDKA） after taking empagliflozin. METHODS Clinical pharmacists provided pharmaceutical care for a patient with T2DM and LGMD who developed euDKA after taking empagliflozin. According to the patient’s recent use of medications and his conditions， clinical pharmacists assessed the correlation between euDKA and empagliflozin as “very likely”. As to euDKA， clinical pharmacists suggested discontinuing empagliflozin and metformin， and giving intravenous infusion of 10% Glucose injection instead of 5% Glucose injection for fluid resuscitation. Clinical pharmacists monitored the patient’s laboratory indicators such as arterial blood gas analysis， blood/urine ketones and electrolytes. They assisted physicians to decide when to stop intravenous supplements of liquid and insulin. Clinical pharmacists also assisted physicians to adjust the antidiabetic drugs and educated the patient to avoid empagliflozin or other sodium- glucose linked transporter 2 inhibitors （SGLT2i）. RESULTS Physicians adopted the suggestions of clinical pharmacists. After treatment， the patient’s condition improved， and he was allowed to be discharged with medication. CONCLUSIONS euDKA is a relatively rare and serious adverse reaction associated with SGLT2i， and the patients with LGMD are susceptible to euDKA. Clinical pharmacists assist physicians in developing personalized medication plans by evaluating the association between euDKA and empagliflozin， adjusting medication regimens，conducting pharmaceutical monitoring，and other pharmaceutical services. Meanwhile， they provide medication education to patients to ensure their medication safety.

Background: s/Aims: Distal pancreatectomy with splenectomy (DPS) is a common surgical procedure for pancreatic body cancer.However, spleen-preserving distal pancreatectomy (SPDP) utilizing the Warshaw technique (WT) in malignancies is generally not favored due to concerns about inadequate resection. This study aims to assess the feasibility and oncologic outcomes of employing SPDP with WT in pancreatic body cancer. Methods: We conducted a retrospective analysis comparing 21 SPDP patients with 63 DPS patients matched by propensity score from January 2018 to November 2022. Clinical outcomes and follow-up data were analyzed using R. Results: Both groups exhibited similar demographic, intraoperative, and pathological characteristics, with the exception of a reduced number of total lymph nodes (p = 0.006) in the SPDP group. There were no significant differences in the rates of postoperative complications, recurrence, or metastasis. Local recurrence predominantly occurred in the central region as opposed to the spleen region.There were no cases of isolated recurrences in the splenic region. Median overall survival and recurrence-free survival times were 51.5 months for SPDP vs 30.5 months for DPS and 18.7 months vs 16.8 months, respectively (p > 0.05). The incidence of partial splenic infarction and left-side portal hypertension in the SPDP group was 28.6% (6/21) and 9.5% (2/21), respectively, without necessitating splenic abscess puncture, splenectomy, or causing bleeding from perigastric varices. Conclusions SPDP did not negatively impact local recurrence or survival rates in selected pancreatic body cancer patients. Further studies are necessary for validation.

Background: s/Aims: Distal pancreatectomy with splenectomy (DPS) is a common surgical procedure for pancreatic body cancer.However, spleen-preserving distal pancreatectomy (SPDP) utilizing the Warshaw technique (WT) in malignancies is generally not favored due to concerns about inadequate resection. This study aims to assess the feasibility and oncologic outcomes of employing SPDP with WT in pancreatic body cancer. Methods: We conducted a retrospective analysis comparing 21 SPDP patients with 63 DPS patients matched by propensity score from January 2018 to November 2022. Clinical outcomes and follow-up data were analyzed using R. Results: Both groups exhibited similar demographic, intraoperative, and pathological characteristics, with the exception of a reduced number of total lymph nodes (p = 0.006) in the SPDP group. There were no significant differences in the rates of postoperative complications, recurrence, or metastasis. Local recurrence predominantly occurred in the central region as opposed to the spleen region.There were no cases of isolated recurrences in the splenic region. Median overall survival and recurrence-free survival times were 51.5 months for SPDP vs 30.5 months for DPS and 18.7 months vs 16.8 months, respectively (p > 0.05). The incidence of partial splenic infarction and left-side portal hypertension in the SPDP group was 28.6% (6/21) and 9.5% (2/21), respectively, without necessitating splenic abscess puncture, splenectomy, or causing bleeding from perigastric varices. Conclusions SPDP did not negatively impact local recurrence or survival rates in selected pancreatic body cancer patients. Further studies are necessary for validation.

Background: s/Aims: Distal pancreatectomy with splenectomy (DPS) is a common surgical procedure for pancreatic body cancer.However, spleen-preserving distal pancreatectomy (SPDP) utilizing the Warshaw technique (WT) in malignancies is generally not favored due to concerns about inadequate resection. This study aims to assess the feasibility and oncologic outcomes of employing SPDP with WT in pancreatic body cancer. Methods: We conducted a retrospective analysis comparing 21 SPDP patients with 63 DPS patients matched by propensity score from January 2018 to November 2022. Clinical outcomes and follow-up data were analyzed using R. Results: Both groups exhibited similar demographic, intraoperative, and pathological characteristics, with the exception of a reduced number of total lymph nodes (p = 0.006) in the SPDP group. There were no significant differences in the rates of postoperative complications, recurrence, or metastasis. Local recurrence predominantly occurred in the central region as opposed to the spleen region.There were no cases of isolated recurrences in the splenic region. Median overall survival and recurrence-free survival times were 51.5 months for SPDP vs 30.5 months for DPS and 18.7 months vs 16.8 months, respectively (p > 0.05). The incidence of partial splenic infarction and left-side portal hypertension in the SPDP group was 28.6% (6/21) and 9.5% (2/21), respectively, without necessitating splenic abscess puncture, splenectomy, or causing bleeding from perigastric varices. Conclusions SPDP did not negatively impact local recurrence or survival rates in selected pancreatic body cancer patients. Further studies are necessary for validation.

Animal experiments are widely used in biomedical research for safety assessment, toxicological analysis, efficacy evaluation, and mechanism exploration. In recent years, the ethical review system has become more stringent, and awareness of animal welfare has continuously increased. To promote more efficient and cost-effective drug research and development, the United States passed the Food and Drug Administration (FDA) Modernization Act 2.0 in September 2022, which removed the federal mandate requiring animal testing in preclinical drug research. In April 2025, the FDA further proposed to adopt a series of "new alternative methods" in the research and development of drugs such as monoclonal antibodies, which included artificial intelligence computing models, organoid toxicity tests, and 3D micro-physiological systems, thereby gradually phasing out traditional animal experiment models. Among these cutting-edge technologies, 3D bioprinting models are a significant alternative and complement to animal models, owing to their high biomimetic properties, reproducibility, and scalability. This review provides a comprehensive overview of advancements and applications of 3D bioprinting technology in the fields of biomedical and pharmaceutical research. It starts by detailing the essential elements of 3D bioprinting, including the selection and functional design of biomaterials, along with an explanation of the principles and characteristics of various printing strategies, highlighting the advantages in constructing complex multicellular spatial structures, regulating microenvironments, and guiding cell fate. It then discusses the typical applications of 3D bioprinting in drug research and development,including high-throughput screening of drug efficacy by constructing disease models such as tumors, infectious diseases, and rare diseases, as well as conducting drug toxicology research by building organ-specific models such as those of liver and heart. Additionally,the review examines the role of 3D bioprinting in tissue engineering, discussing its contributions to the construction of functional tissues such as bone, cartilage, skin, and blood vessels, as well as the latest progress in regeneration and replacement. Furthermore, this review analyzes the complementary advantages of 3D bioprinting models and animal models in the research of disease progression, drug mechanisms, precision medicine, drug development, and tissue regeneration, and discusses the potential and challenges of their integration in improving model accuracy and physiological relevance. In conclusion, as a cutting-edge in vitro modeling and manufacturing technology, 3D bioprinting is gradually establishing a comprehensive application system covering disease modeling, drug screening, toxicity prediction, and tissue regeneration.

Animal experiments are widely used in biomedical research for safety assessment, toxicological analysis, efficacy evaluation, and mechanism exploration. In recent years, the ethical review system has become more stringent, and awareness of animal welfare has continuously increased. To promote more efficient and cost-effective drug research and development, the United States passed the Food and Drug Administration (FDA) Modernization Act 2.0 in September 2022, which removed the federal mandate requiring animal testing in preclinical drug research. In April 2025, the FDA further proposed to adopt a series of "new alternative methods" in the research and development of drugs such as monoclonal antibodies, which included artificial intelligence computing models, organoid toxicity tests, and 3D micro-physiological systems, thereby gradually phasing out traditional animal experiment models. Among these cutting-edge technologies, 3D bioprinting models are a significant alternative and complement to animal models, owing to their high biomimetic properties, reproducibility, and scalability. This review provides a comprehensive overview of advancements and applications of 3D bioprinting technology in the fields of biomedical and pharmaceutical research. It starts by detailing the essential elements of 3D bioprinting, including the selection and functional design of biomaterials, along with an explanation of the principles and characteristics of various printing strategies, highlighting the advantages in constructing complex multicellular spatial structures, regulating microenvironments, and guiding cell fate. It then discusses the typical applications of 3D bioprinting in drug research and development,including high-throughput screening of drug efficacy by constructing disease models such as tumors, infectious diseases, and rare diseases, as well as conducting drug toxicology research by building organ-specific models such as those of liver and heart. Additionally,the review examines the role of 3D bioprinting in tissue engineering, discussing its contributions to the construction of functional tissues such as bone, cartilage, skin, and blood vessels, as well as the latest progress in regeneration and replacement. Furthermore, this review analyzes the complementary advantages of 3D bioprinting models and animal models in the research of disease progression, drug mechanisms, precision medicine, drug development, and tissue regeneration, and discusses the potential and challenges of their integration in improving model accuracy and physiological relevance. In conclusion, as a cutting-edge in vitro modeling and manufacturing technology, 3D bioprinting is gradually establishing a comprehensive application system covering disease modeling, drug screening, toxicity prediction, and tissue regeneration.