Tissue interactions play a crucial role in tooth development. Notably, extracellular vesicle-mediated interactions between the mandible and tooth germ are considered essential. Here, we revealed that mandible extracellular vesicles could modulate the proliferation and differentiation of dental mesenchymal cells by regulating the histone demethylase KDM2B. Further investigation showed that mandible derived extracellular vesicles could deliver miR-206 to KDM2B, thereby regulating tooth development. An animal study demonstrated that the miR-206/KDM2B pathway affected tooth morphogenesis and mineralization after eight weeks of subcutaneous transplantation in nude mice. In conclusion, this study suggested that the mandible played a critical role in tooth morphogenesis and mineralization, which could be a potential therapeutic target for abnormal tooth development and an alternative model for tooth regeneration.
Animals ; Extracellular Vesicles/metabolism* ; Jumonji Domain-Containing Histone Demethylases/metabolism* ; Swine ; MicroRNAs/metabolism* ; Mandible ; Mice, Nude ; Odontogenesis/physiology* ; Swine, Miniature ; Mice ; Cell Differentiation ; Cell Proliferation

OBJECTIVES: This study aims to compare the effects of two orthodontic treatment modalities for skeletal class Ⅲ malocclusion on specific changes in airway volume, morphology, palatal angle, mandibular rotation, and bone displacement. Results provide scientific evidence for the selection of orthodontic treatment plans and reduce the risk of developing obstructive sleep apnea hypopnea syndrome (OSAHS). METHODS: Thirty-six patients diagnosed with skeletal class Ⅲ malocclusion at the Department of Orthodontics, the Affiliated Stomatological Hospital of Nanjing Medical University from September 2018 to December 2023 were divided into two groups: orthodontic-orthognathic treatment group (18 patients) and camouflage orthodontic treatment group (18 patients). Changes in airway volume, cross-sectional area, palatal angle, mandibular, and tongue positions were observed through pre- and post-operative cone beam computed tomography and 3D cephalometric measurements. RESULTS: In the camouflage orthodontic treatment group, nasopharyngeal volume and oropharyngeal volume statistically increased after treatment (P<0.05). In the orthodontic-orthognathic treatment group, changes in nasopharyngeal volume, nasopharyngeal airway, distance from posterior tongue to pharyngeal wall, palatal angle, mandibular rotation, and hyoid bone displacement were statistically significant after surgery (P<0.05). In the comparison between the two groups after treatment, changes in the distance from posterior tongue to pharyngeal wall, palatal angle, and distance from hyoid bone to sella turcica point were statistically significant (P<0.05). CONCLUSIONS Patients in the orthodontic-orthognathic treatment group showed significantly greater changes in oropharyngeal cross-sectional area, palate angle, and tongue position compared with patients in the camouflage orthodontic treatment group. As individuals susceptible to OSAHS often exhibit mandibular retrusion and decreased minimum airway cross-sectional area, special attention should be paid to airway morphology changes when adopting orthodontic-orthognathic treatment to avoid adverse consequences.
Humans ; Hyoid Bone/diagnostic imaging* ; Malocclusion, Angle Class III/therapy* ; Male ; Female ; Cone-Beam Computed Tomography ; Cephalometry ; Orthodontics, Corrective/methods* ; Adult ; Mandible ; Pharynx/diagnostic imaging* ; Sleep Apnea, Obstructive/etiology* ; Orthognathic Surgical Procedures

OBJECTIVES: This study aimed to investigate the clinical characteristics of deciduous fused teeth and their inherited permanent-tooth performance type by using panoramic radiographs. METHODS: A total of 14 404 panoramic radiographs of 3- to 6-year-old children with deciduous dentition were collected from January 2023 to July 2024. The incidence of deciduous fused teeth was observed, and the abnormality of permanent teeth was recorded. SPSS 24.0 software was used for statistical analysis. RESULTS: The incidence of deciduous fused teeth was 3.06% (441/14 404). The order of dental position was as follows: mandibular deciduous incisors and cusp teeth fused (58.18%) > mandibular deciduous central and lateral incisors fused (30.91%) > maxillary deciduous central and lateral incisors fused (8.89%) > deciduous incisors and supernumerary teeth fused (2.02%). Deciduous fused teeth were found in 226 boys and 215 girls, with no significant difference between the sexes (P>0.05). We observed one pair (87.76%, 387/441) and two pairs (12.24%, 54/441) of fused teeth (54/441), respectively. A total of 287 pairs of fusion teeth on the right side more than 208 pairs on the left side, and the difference between them was statistically significant (P<0.01). More fusion teeth existed in mandibular deciduous teeth (443 pairs) than in maxillary ones (54 pairs), and the difference between them was statistically significant (P<0.01). More unilateral deciduous teeth (387 subjects) were found than bilateral ones (54 subjects), and the difference between them was statistically significant (P<0.01). Three types of deciduous fused teeth with inherited permanent teeth were observed as follows: 1) 49.49% (245/495) of inherited permanent teeth was absent, 2) 46.67% (231/495) of inherited permanent teeth was not absent, and 3) the number of fused permanent teeth accounted for 3.84% (19/495). CONCLUSIONS The incidence of deciduous fused teeth was 3.06%, mostly occurring in the lower anterior teeth region, with no gender difference. One pair of fused teeth is commonly observed, more often on the right than the left. These fusions occur more frequently in the mandible than the maxillary, and unilateral cases are more common than bilateral ones. Deciduous fused teeth had a certain impact on inherited permanent teeth. Pediatric dentists should pay attention to and closely observe whether any abnormality exists in the permanent dentition for early detection to prevent the harm caused by deciduous fused teeth.
Humans ; Tooth, Deciduous/abnormalities* ; Male ; Child ; Female ; Child, Preschool ; Dentition, Permanent ; Radiography, Panoramic ; Fused Teeth/diagnostic imaging* ; Incisor/diagnostic imaging* ; Tooth, Supernumerary/diagnostic imaging* ; Incidence ; Mandible

OBJECTIVES: This study aims to evaluate the changes in the mandibular canal following the treatment of large odontogenic keratocysts through decompression and curettage, providing a theoretical basis for sequential treatment. METHODS: Twenty patients were selected for each decompression and curettage treatment of large odontogenic keratocysts in the mandible. Postoperative follow-up with was conducted every three months, during which cone beam computed tomography (CBCT) scans were performed. Then, the data were imported into MIMICS software to observe 3D changes in the position and structure of the mandibular nerve canal, followed by a comparative analysis. RESULTS: The total displacement of the mandibular canal was (1.89±0.21) mm on the decompression side and (0.80±0.19) mm on the curettage side. Vertically, the displacement range of the mandibular canal on the decompression side (M=1.03, SD=0.17) was larger than on the curettage side (M=0.52, SD=0.010) within nine months post-operation. In the buccal-lingual direction, the ratio of the thickness of the buccal plate to the lingual plate gradually increased with time. The amount of bone reconstruction at the part of the mandibular nerve canal closest to the cyst was (1.75±0.15) mm on the decompression side and (1.45±0.09) mm on the curettage side after nine months. CONCLUSIONS The mandibular nerve canal showed varying degrees of recovery and "relocation" after two surgical procedures. Osteogenesis around the mandibular nerve canal was more remarkable after decompression than after curettage. Therefore, for large odontogenic keratocyst, decompression is recommended as the initial treatment, followed by secondary curettage nine months later.
Humans ; Odontogenic Cysts/diagnostic imaging* ; Retrospective Studies ; Cone-Beam Computed Tomography ; Decompression, Surgical/methods* ; Mandibular Nerve/surgery* ; Mandible/innervation* ; Curettage ; Male ; Female ; Adult ; Middle Aged

OBJECTIVES: The objective of this study is to measuring the morphology and position of bilateral temporomandibular joints in patients with unilateral and bilateral molar scissor bite and simulating the deformation of the mandible during occlusion, in order to provide thesis for the diagnosis of temporomandibular joint disease in patients with unilateral and bilateral molar scissor bite. METHODS: This study was a retrospective study. A total of 10 patients with unilateral molar scissor bite (the unilateral molar scissor bite group) and 10 patients with bilateral molar scissor bite (the bilateral molar scissor bite group) were selected as the experimental group, and 20 adult patients with classⅠ of angle classification of similar ages were selected as the control group. All patients underwent cone beam computed tomography scans, by measuring the width of the fossa, height of the fossa, articular eminence inclination, long axis of the condyle, minor axis of the condyle, horizontal angle of the condyle and the space of the temporomandibular joint, compare temporomandibular joint morphology and position. The three-dimensional finite element analysis of the mandible morphology was carried out to evaluate the force and deformation of the mandible by using software to simulate the occlusion of the patients. It was further explored the relationship between the force of the mandible morphology and the possible temporomandibular joint disorder symptoms of the patients. RESULTS: Intergroup comparisons for the unilateral molar scissor bite group and left sides of the other groups revealed that the superior articular space in the group with unilateral molar scissor bite was shorter than that in the control group (P<0.05); the long axis of the condyle in the unilateral and bilateral molar scissor bite group were both shorter than that of the control group (P<0.05); among which the unilateral group was larger than the bilateral group, and the minor axis of the condyle in bilateral molar scissor bite group was smaller than in the control group (P<0.05), and the unilateral and bilateral condylar groups were larger than the control group (P<0.05); and the condylar horizontal angle in the unilateral and bilateral groups were larger than that in the control group (P<0.05). The normal sides of the unilateral molar scissor bite group and right sides of the other groups had smaller superior articular space than the control group (P<0.05); and the condylar long-axis in bilateral group was smaller than the control group (P<0.05); and the normal side of the condylar short-axis unilateral group was larger than that of the bilateral condylar group. Three-dimensional finite element analysis: the condyle of patients with molar scissor bite was a concentrated area of deformation during the bite of the mandible, when the first molar occlusion of the scissors bite side was simulated, the maximum deformation was located in the condyle in the X-axis and Z-axis directions. The amount of deformation was greater than that of the scissor bite side in the X-axis direction, while in the Z-axis direction, the normal side was greater than the scissor bite side. The maximum sites of local deformation in the X-axis direction were located in anterior and posterior the transverse crest of scissor bite side, and the minimum sites of local deformation was at 1/3 of the anterior slope of the inner pole of the normal side, the maximum local deformation sites in the Z-axis direction were located in the outer pole and below the outer pole of the normal side. The X-axis deformation value was the largest in the molars occlusion on the normal side, the Y-axis deformation value was in the premolars occlusion on the normal side, and the Z-axis deformation value was the largest in the centric occlusion, the deformation value of the condyle was not most significant in molar scissor bite. CONCLUSIONS Unilateral and bilateral molar scissor bite resulting in a short condyle morphology, and the bilateral group had a shorter condylar morphology than the unilateral group. The condyle of the patient with molar scissor bite is a concentrated area of poor occlusal deformation, and the largest sites of deformation are distributed near the transverse ridge of the inner and outer poles of the condyle. Different occlusion conditions have an effect on condylar deformation values, but do not indicate whether there is a clear association between them.
Humans ; Finite Element Analysis ; Retrospective Studies ; Temporomandibular Joint/pathology* ; Cone-Beam Computed Tomography ; Mandible/pathology* ; Imaging, Three-Dimensional ; Adult ; Temporomandibular Joint Disorders/diagnostic imaging* ; Mandibular Condyle/diagnostic imaging* ; Female ; Male ; Molar

Stafne bone cavity, also known as static bone cavity, is a rare bony defect on the lingual side of the mandible. It rarely shows progressive changes, and requires only follow-up bservation. This article described a case of progressive enlargement of a Stafne bone cavity and analyzed the causes of its progress by reviewing relevant literature.
Humans ; Mandible

OBJECTIVES: To investigate the clinical application of the digital-assisted reconstruction of the mandible and tumors with free fibula transplantation and immediate implantation via the intraoral approach. METHODS: Twelve patients with benign mandibular tumors were collected. Three-dimensional mandibular reconstruction was performed digitally before surgery to simulate mandibular tumor resection, fibula resection and reconstruction, and implant implantation. The intraoperative resection of the mandibular tumor was conducted through the intraoral approach under the guidance of a guide plate, and fibula resection, molding, reconstruction, and oral fixation were immediately performed. Implant implantation was performed during the second phase of implant surgery and denture restoration was performed 1-2 months after surgery. RESULTS: The types of mandibular defects were BrownⅠ (one case), Ⅰc (four cases), Ⅱ (one case), Ⅱc(three cases), and Ⅲ (three cases). The length of the fibular bone was 12-22 cm. The number of fibular molding amputations was as follows: two cases in two segments, six cases in three segments, three cases in four segments, and one case in five segments. All of these cases underwent folding fibular reconstruction of mandibular and alveolar bone defects. A total of 44 implants were implanted, and none failed after operation. CONCLUSIONS The intraoral approach is a reliable method for the resection of mandibular benign tumors, with few postoperative complications and the ability to position and fix accurately the reconstructed folded fibula under digital design. The immediate implantation of the transplanted fibula does not affect the blood supply and has a high success rate. It is an effective and reliable method for the resection and reconstruction of mandibular benign tumors.
Humans ; Fibula/transplantation* ; Mandibular Neoplasms/surgery* ; Mandibular Reconstruction/methods* ; Bone Transplantation/methods* ; Male ; Middle Aged ; Female ; Mandible/surgery* ; Adult ; Free Tissue Flaps ; Surgery, Computer-Assisted

OBJECTIVES: Magnetic resonance imaging (MRI) was used to study the efficacy of modified anterior splint (MAS) combined with anterior repositioning splint (ARS) in maintaining the normal disk-condyle relationship. METHODS: We obtained clinical and imaging data of 10 patients with acute anterior disk displacement without reduction (ADDwoR) of the temporomandibular joint undergoing successful mandibular manipulation in the Affiliated Stomatological Hospital, Nanchang University from January to June 2024. The MAS and ARS were used for subsequent treatment. Maximum active mouth opening (MMO) and visual analogue score (VAS) were recorded before treatment and 2 weeks, 1 month, and 3 months after treatment. The changes in the disk-condyle relationship, disk-condyle angle, joint effusion, and double contour sign before and after treatment were analyzed through MRI. RESULTS: Three months after treatment, the MMO increased from 28.90 mm to 46.85 mm, VAS decreased from 4.68 to 0.61, and the disk-condyle angle decreased from 58.84° to 25.99°. MRI analysis found that 6 patients showed normal disk-condyle relationship, 2 patients exhibited displacement with reduction, and 2 patients exhibited ADDwoR. The disk-condyle angle was 58.84° before treatment and 25.99° after treatment. CONCLUSIONS The MAS combined with ARS could further stabilize the coordinated disk-condyle relationship and reduce the recurrence rate.
Humans ; Male ; Magnetic Resonance Imaging ; Female ; Adult ; Temporomandibular Joint Disorders/diagnostic imaging* ; Splints ; Middle Aged ; Mandible ; Temporomandibular Joint Disc ; Occlusal Splints ; Temporomandibular Joint ; Young Adult ; Joint Dislocations/therapy*

OBJECTIVES: This retrospective study aimed to investigate factors influencing positional changes of the condyle and temporomandibular joint (TMJ) following mandibular defect reconstruction with bone flaps, and to evaluate the biomechanical impacts of flap reconstruction on condylar positioning, thereby providing evidence for optimizing surgical protocols and TMJ functional rehabilitation. METHODS: A retrospective study was conducted on 90 patients undergoing mandibular segmental resection with immediate bone flap reconstruction at Guizhou Medical University Affiliated Stomatological Hospital (June 2019 to May 2024). After strict screening, 50 cases with complete data were analyzed. Clinical parameters (defect size, location, reconstruction method) and craniofacial CT scans at four timepoints [preoperative (T0), 7-10 days (T1), 3 months (T2), and 6 months (T3) postoperatively] were collected. Mimics 20 software facilitated 3D reconstruction for measuring TMJ anterior/posterior/superior joint spaces (Kamelchuk method) and calculating condylar position via the Pullinger index [Ln (posterior/anterior space)]. Vitral and Krisjane methods quantified mandibular linear parameters (ramus length, condylar pole distances to the sagittal plane, angulation) and glenoid fossa morphology. Statistical analyses were performed using SPSS 21.0. RESULTS: Mandibular defect size and location were significant factors influencing postoperative condylar position changes (P<0.05). Compared to preoperative measurements, postoperative condylar anterior, posterior, and superior joint spaces were significantly increased (P<0.001). The most pronounced anterior condylar displacement occurred within 7-10 days postoperatively (P<0.05). In patients with condyle resection, postoperative joint space and angle changes were significant; in patients with condyle preservation, only superior and anterior joint space changes were statistically significant (P<0.05). Additionally, from T1 to T2, the changes in condylar medial-lateral distance, superior joint space, and anterior joint space were negatively correlated with the preoperative condylar position. Compared with preoperative,in the T0-T1 period, condylar medial-lateral distance, posterior joint space, and articular tubercle angle changes were significantly negatively correlated with time (P<0.05). Notably, the angle between the condylar long axis and the coronal axis showed a sustained negative trend from T1 to T3 (P<0.05). CONCLUSIONS Condylar position changes after mandibular defect repair with bone flap reconstruction are associated with the size and location of the defect. Additionally, adaptive remodeling of the temporomandibular joint (TMJ) joint space occurs postoperatively. The phenomenon of anterior displacement of the condyle in the early postoperative period (7-10 days) shows a trend of reduction with prolonged follow-up time, and further sample size research is needed.
Humans ; Retrospective Studies ; Temporomandibular Joint/surgery* ; Mandibular Condyle/surgery* ; Male ; Female ; Adult ; Middle Aged ; Mandibular Reconstruction/methods* ; Mandible/surgery* ; Surgical Flaps ; Tomography, X-Ray Computed ; Young Adult ; Biomechanical Phenomena ; Aged ; Adolescent ; Imaging, Three-Dimensional

Fused teeth are usually formed by the partial or complete fusion of two normal tooth germs during the development process and belong to dental developmental abnormalities. Fused teeth are relatively rare clinically, and those occurring in the posterior tooth area are even rarer. This article reports a case of fused teeth between the first permanent molar and the second permanent molar in the right mandible. This fused tooth had a complex root canal anatomical structure (seven root canals). The number and location of the root canals were analyzed by cone beam computed tomography, and root canal treatment was successfully completed with the assistance of microscope.
Humans ; Molar/diagnostic imaging* ; Mandible ; Dental Pulp Cavity/abnormalities* ; Cone-Beam Computed Tomography ; Root Canal Therapy/methods* ; Fused Teeth/surgery*