OBJECTIVES: This study aims to evaluate the changes in the mandibular canal following the treatment of large odontogenic keratocysts through decompression and curettage, providing a theoretical basis for sequential treatment. METHODS: Twenty patients were selected for each decompression and curettage treatment of large odontogenic keratocysts in the mandible. Postoperative follow-up with was conducted every three months, during which cone beam computed tomography (CBCT) scans were performed. Then, the data were imported into MIMICS software to observe 3D changes in the position and structure of the mandibular nerve canal, followed by a comparative analysis. RESULTS: The total displacement of the mandibular canal was (1.89±0.21) mm on the decompression side and (0.80±0.19) mm on the curettage side. Vertically, the displacement range of the mandibular canal on the decompression side (M=1.03, SD=0.17) was larger than on the curettage side (M=0.52, SD=0.010) within nine months post-operation. In the buccal-lingual direction, the ratio of the thickness of the buccal plate to the lingual plate gradually increased with time. The amount of bone reconstruction at the part of the mandibular nerve canal closest to the cyst was (1.75±0.15) mm on the decompression side and (1.45±0.09) mm on the curettage side after nine months. CONCLUSIONS The mandibular nerve canal showed varying degrees of recovery and "relocation" after two surgical procedures. Osteogenesis around the mandibular nerve canal was more remarkable after decompression than after curettage. Therefore, for large odontogenic keratocyst, decompression is recommended as the initial treatment, followed by secondary curettage nine months later.
Humans ; Odontogenic Cysts/diagnostic imaging* ; Retrospective Studies ; Cone-Beam Computed Tomography ; Decompression, Surgical/methods* ; Mandibular Nerve/surgery* ; Mandible/innervation* ; Curettage ; Male ; Female ; Adult ; Middle Aged

OBJECTIVES: To investigate the clinical application of the digital-assisted reconstruction of the mandible and tumors with free fibula transplantation and immediate implantation via the intraoral approach. METHODS: Twelve patients with benign mandibular tumors were collected. Three-dimensional mandibular reconstruction was performed digitally before surgery to simulate mandibular tumor resection, fibula resection and reconstruction, and implant implantation. The intraoperative resection of the mandibular tumor was conducted through the intraoral approach under the guidance of a guide plate, and fibula resection, molding, reconstruction, and oral fixation were immediately performed. Implant implantation was performed during the second phase of implant surgery and denture restoration was performed 1-2 months after surgery. RESULTS: The types of mandibular defects were BrownⅠ (one case), Ⅰc (four cases), Ⅱ (one case), Ⅱc(three cases), and Ⅲ (three cases). The length of the fibular bone was 12-22 cm. The number of fibular molding amputations was as follows: two cases in two segments, six cases in three segments, three cases in four segments, and one case in five segments. All of these cases underwent folding fibular reconstruction of mandibular and alveolar bone defects. A total of 44 implants were implanted, and none failed after operation. CONCLUSIONS The intraoral approach is a reliable method for the resection of mandibular benign tumors, with few postoperative complications and the ability to position and fix accurately the reconstructed folded fibula under digital design. The immediate implantation of the transplanted fibula does not affect the blood supply and has a high success rate. It is an effective and reliable method for the resection and reconstruction of mandibular benign tumors.
Humans ; Fibula/transplantation* ; Mandibular Neoplasms/surgery* ; Mandibular Reconstruction/methods* ; Bone Transplantation/methods* ; Male ; Middle Aged ; Female ; Mandible/surgery* ; Adult ; Free Tissue Flaps ; Surgery, Computer-Assisted

OBJECTIVES: This retrospective study aimed to investigate factors influencing positional changes of the condyle and temporomandibular joint (TMJ) following mandibular defect reconstruction with bone flaps, and to evaluate the biomechanical impacts of flap reconstruction on condylar positioning, thereby providing evidence for optimizing surgical protocols and TMJ functional rehabilitation. METHODS: A retrospective study was conducted on 90 patients undergoing mandibular segmental resection with immediate bone flap reconstruction at Guizhou Medical University Affiliated Stomatological Hospital (June 2019 to May 2024). After strict screening, 50 cases with complete data were analyzed. Clinical parameters (defect size, location, reconstruction method) and craniofacial CT scans at four timepoints [preoperative (T0), 7-10 days (T1), 3 months (T2), and 6 months (T3) postoperatively] were collected. Mimics 20 software facilitated 3D reconstruction for measuring TMJ anterior/posterior/superior joint spaces (Kamelchuk method) and calculating condylar position via the Pullinger index [Ln (posterior/anterior space)]. Vitral and Krisjane methods quantified mandibular linear parameters (ramus length, condylar pole distances to the sagittal plane, angulation) and glenoid fossa morphology. Statistical analyses were performed using SPSS 21.0. RESULTS: Mandibular defect size and location were significant factors influencing postoperative condylar position changes (P<0.05). Compared to preoperative measurements, postoperative condylar anterior, posterior, and superior joint spaces were significantly increased (P<0.001). The most pronounced anterior condylar displacement occurred within 7-10 days postoperatively (P<0.05). In patients with condyle resection, postoperative joint space and angle changes were significant; in patients with condyle preservation, only superior and anterior joint space changes were statistically significant (P<0.05). Additionally, from T1 to T2, the changes in condylar medial-lateral distance, superior joint space, and anterior joint space were negatively correlated with the preoperative condylar position. Compared with preoperative,in the T0-T1 period, condylar medial-lateral distance, posterior joint space, and articular tubercle angle changes were significantly negatively correlated with time (P<0.05). Notably, the angle between the condylar long axis and the coronal axis showed a sustained negative trend from T1 to T3 (P<0.05). CONCLUSIONS Condylar position changes after mandibular defect repair with bone flap reconstruction are associated with the size and location of the defect. Additionally, adaptive remodeling of the temporomandibular joint (TMJ) joint space occurs postoperatively. The phenomenon of anterior displacement of the condyle in the early postoperative period (7-10 days) shows a trend of reduction with prolonged follow-up time, and further sample size research is needed.
Humans ; Retrospective Studies ; Temporomandibular Joint/surgery* ; Mandibular Condyle/surgery* ; Male ; Female ; Adult ; Middle Aged ; Mandibular Reconstruction/methods* ; Mandible/surgery* ; Surgical Flaps ; Tomography, X-Ray Computed ; Young Adult ; Biomechanical Phenomena ; Aged ; Adolescent ; Imaging, Three-Dimensional

Fused teeth are usually formed by the partial or complete fusion of two normal tooth germs during the development process and belong to dental developmental abnormalities. Fused teeth are relatively rare clinically, and those occurring in the posterior tooth area are even rarer. This article reports a case of fused teeth between the first permanent molar and the second permanent molar in the right mandible. This fused tooth had a complex root canal anatomical structure (seven root canals). The number and location of the root canals were analyzed by cone beam computed tomography, and root canal treatment was successfully completed with the assistance of microscope.
Humans ; Molar/diagnostic imaging* ; Mandible ; Dental Pulp Cavity/abnormalities* ; Cone-Beam Computed Tomography ; Root Canal Therapy/methods* ; Fused Teeth/surgery*

The accidental displacement of tooth roots into the mandibular canal is a serious complication during tooth extractions in oral and maxillofacial surgery, often resulting in direct damage to the structural and functional integrity of the inferior alveolar neurovascular bundle (IANB). This article reviews the anatomical features of the mandibular canal, the IANB, and adjacent tooth roots; identifies high-risk factors and anatomically vulnerable sites for root displacement; and outlines the clinical manifestations and radiographic characteristics of intraoperative root intrusion into the mandibular canal. Furthermore, management principles, surgical approaches and techniques, inferior alveolar nerve injury treatment, and prognostic considerations are discussed. The aim of this review is to provide a comprehensive clinical reference for improving surgical outcomes, and reducing postoperative complications.
Humans ; Tooth Extraction/adverse effects* ; Mandible/surgery* ; Tooth Root ; Mandibular Nerve/anatomy & histology* ; Postoperative Complications/prevention & control* ; Intraoperative Complications ; Mandibular Nerve Injuries/etiology*

Objective:Exploring the clinical application effect of a series of digital designed guide plates in the repair of mandibular defects with free fibular muscle flap. Methods:A total of 32 patients who underwent fibular muscle flap repair of mandibular defects in the Head and Neck Tumor Surgery Department of Xi'an Jiaotong University Stomatological Hospital were selected as the research subjects. They were divided into a guide plate assisted group（16 cases） and a conventional surgery group（16 cases） according to the different surgical methods. The guide plate assisted group completed the surgery with the assistance of a digital design series of guide plates, while the conventional surgery group served as the control. Record the preparation and shaping time of two groups of fibular myocutaneous flaps, evaluate the surgical effect at least 6 months after surgery, and conduct a patient satisfaction survey. Use SPSS 16.0 software package to statistically process the data. Results:The preparation and shaping time of the fibular muscle flap in the guide plate assisted group were significantly shorter than those in the conventional surgery group（P<0.05）. The excellent and good rate（87.5%） of the guide plate assisted group in evaluating the surgical effect was significantly higher than that of the conventional surgery group（75.0%）（P<0.05）. The satisfaction scores of patients in the guide plate assisted group for facial shape and bite function recovery were significantly higher than those in the conventional surgery group（P<0.05）, while there was no significant statistical difference in the satisfaction scores of pronunciation function recovery between the two groups（P>0.05）. Conclusion:The design of digital guide plates can improve the accuracy of repairing mandibular defects with fibular flaps, shorten the preparation and shaping time of fibular flaps, restore good facial appearance and bite relationship of patients, and improve satisfaction. It is worth promoting and applying in clinical practice, but the design accuracy still needs to be continuously improved.
Humans ; Myocutaneous Flap ; Mandible/surgery* ; Fibula/transplantation* ; Plastic Surgery Procedures/methods* ; Male ; Free Tissue Flaps ; Female ; Middle Aged ; Mandibular Reconstruction/methods* ; Adult ; Patient Satisfaction

OBJECTIVE: To preliminarily verify the effectiveness of self-designed artificial condyle-mandibular distraction (AC-MD) complex in the treatment of Pruzansky type ⅡB and Ⅲ hemifacial microsomia (HFM) through model test. METHODS: Five children with Pruzansky type ⅡB and Ⅲ HFM who were treated with mandibular distraction osteogenesis (MDO) between December 2016 and December 2021 were selected as the subjects. There were 3 boys and 2 girls wih an average age of 8.4 years (range, 6-10 years). Virtual surgery and model test of AC-MD complex were performed according to preoperative skull CT of children. The model was obtained by three-dimensional (3D) printing according to the children's CT data at a ratio of 1∶1. The occlusal guide plate was designed and 3D printed according to the children's toothpaste model. The results of the model test and the virtual surgery were matched in three dimensions to calculate the error of the residual condyle on the affected side, and the model test was matched with the actual skull CT after MDO to measure and compare the inclination rotation of the mandible, the distance between the condylar of the healthy side and the residual condyle of the affected side, and the lengthening length of the mandible. RESULTS: The error of residual condyle was (1.07±0.78) mm. The inclination rotation of the mandible, the distance between the condylar of the healthy side and the residual condyle of the affected side, and the lengthening length of the mandible after 3D printing model test were significantly larger than those after MDO ( P<0.05). CONCLUSION In the model test, the implantation of AC-MD complex can immediately rotate the mandible to the horizontal position and improve facial symmetry, and the residual condyle segment can be guided close to the articular fossa or the preset pseudoarticular position of the skull base after operation.
Male ; Child ; Female ; Humans ; Goldenhar Syndrome/surgery* ; Mandible/surgery* ; Osteogenesis, Distraction/methods* ; Printing, Three-Dimensional ; Facial Asymmetry/surgery*

OBJECTIVES: This study aimed to establish a new treatment of the mandibular second molars with external root resorption caused by impacted teeth to preserve the affected teeth and their vital pulps. METHODS: For mandibular second molars clinically diagnosed as external root resorption caused by impacted teeth, debridement and removal of the root at the resorption site via micro-apical surgery and direct capping of the pulp with bioactive material on the surface of the root amputation via vital pulp therapy were performed immediately after the impacted teeth were extracted. RESULTS: The external root resorption of the affected tooth was ceased. It was asymptomatic with intact crown, normal pulp, periapical alveolar bone reconstruction, normal periodontal ligament, continuous bone sclerosis, and no periapical translucency in radiographic examination at the 1-year postoperative follow-up, thus showing good prognosis. CONCLUSIONS Simultaneous combination of micro-apical surgery and vital pulp therapy after extraction of impacted teeth could successfully preserve mandibular second molars with ERR caused by impacted teeth and their vital pulps.
Humans ; Tooth, Impacted/surgery* ; Molar ; Mandible ; Dental Pulp ; Root Canal Therapy ; Root Resorption/etiology* ; Tooth Extraction

The mandibular metastatic spread of carcinoma from the thyroid gland is exceedingly rare. Follicular thyroid carcinoma is the second most common type of thyroid carcinoma，accounting for approximately 10% to 15% of all thyroid cancers. The prognosis of FTC is relatively satisfactory. Due to its rich blood transport, it is easy to metastasize hematological, with the main sites of metastasis are bone and lung. However，mandibular metastasis of thyroid follicular carcinoma is rare. We report a case of thyroid follicular carcinoma that metastasized to the ascending ramus of the mandible 21 years after surgery.The operation was successfully completed, and there was no recurrence during postoperative follow-up. Due to the absence of obvious clinical symptoms in the patient, the diagnosis and treatment were challenging. We have provided detailed radiographic and pathological images to facilitate understanding and discussion of the disease.
Humans ; Adenocarcinoma, Follicular/pathology* ; Thyroid Neoplasms/surgery* ; Prognosis ; Mandible

Epidermoid cysts are generally benign neoplastic lesions, the etiology of which is unclear and is mainly related to epithelial cells left in the tissues during the embryonic period and traumatically implanted in the tissues. The most common intraosseous sites are the phalanges and the skull. Epidermoid cysts occurring in the jaws are clinically rare. In this paper, we report a case of epidermoid cyst occurring in the mandible with embedded teeth and discuss the etiology, clinical manifestations, diagnosis, and treatment of epidermoid cysts in the jaws in the context of the relevant literature.
Humans ; Epidermal Cyst/surgery* ; Skull ; Mandible ; Diagnosis, Differential ; Epithelial Cells