OBJECTIVES: This study aimed to investigate the clinical characteristics of deciduous fused teeth and their inherited permanent-tooth performance type by using panoramic radiographs. METHODS: A total of 14 404 panoramic radiographs of 3- to 6-year-old children with deciduous dentition were collected from January 2023 to July 2024. The incidence of deciduous fused teeth was observed, and the abnormality of permanent teeth was recorded. SPSS 24.0 software was used for statistical analysis. RESULTS: The incidence of deciduous fused teeth was 3.06% (441/14 404). The order of dental position was as follows: mandibular deciduous incisors and cusp teeth fused (58.18%) > mandibular deciduous central and lateral incisors fused (30.91%) > maxillary deciduous central and lateral incisors fused (8.89%) > deciduous incisors and supernumerary teeth fused (2.02%). Deciduous fused teeth were found in 226 boys and 215 girls, with no significant difference between the sexes (P>0.05). We observed one pair (87.76%, 387/441) and two pairs (12.24%, 54/441) of fused teeth (54/441), respectively. A total of 287 pairs of fusion teeth on the right side more than 208 pairs on the left side, and the difference between them was statistically significant (P<0.01). More fusion teeth existed in mandibular deciduous teeth (443 pairs) than in maxillary ones (54 pairs), and the difference between them was statistically significant (P<0.01). More unilateral deciduous teeth (387 subjects) were found than bilateral ones (54 subjects), and the difference between them was statistically significant (P<0.01). Three types of deciduous fused teeth with inherited permanent teeth were observed as follows: 1) 49.49% (245/495) of inherited permanent teeth was absent, 2) 46.67% (231/495) of inherited permanent teeth was not absent, and 3) the number of fused permanent teeth accounted for 3.84% (19/495). CONCLUSIONS The incidence of deciduous fused teeth was 3.06%, mostly occurring in the lower anterior teeth region, with no gender difference. One pair of fused teeth is commonly observed, more often on the right than the left. These fusions occur more frequently in the mandible than the maxillary, and unilateral cases are more common than bilateral ones. Deciduous fused teeth had a certain impact on inherited permanent teeth. Pediatric dentists should pay attention to and closely observe whether any abnormality exists in the permanent dentition for early detection to prevent the harm caused by deciduous fused teeth.
Humans ; Tooth, Deciduous/abnormalities* ; Male ; Child ; Female ; Child, Preschool ; Dentition, Permanent ; Radiography, Panoramic ; Fused Teeth/diagnostic imaging* ; Incisor/diagnostic imaging* ; Tooth, Supernumerary/diagnostic imaging* ; Incidence ; Mandible

Fused teeth are usually formed by the partial or complete fusion of two normal tooth germs during the development process and belong to dental developmental abnormalities. Fused teeth are relatively rare clinically, and those occurring in the posterior tooth area are even rarer. This article reports a case of fused teeth between the first permanent molar and the second permanent molar in the right mandible. This fused tooth had a complex root canal anatomical structure (seven root canals). The number and location of the root canals were analyzed by cone beam computed tomography, and root canal treatment was successfully completed with the assistance of microscope.
Humans ; Molar/diagnostic imaging* ; Mandible ; Dental Pulp Cavity/abnormalities* ; Cone-Beam Computed Tomography ; Root Canal Therapy/methods* ; Fused Teeth/surgery*

Objective: To present the case of a midline Tessier 30 cleft in a baby boy who initially underwent a glossoplasty, cheiloplasty and mentoplasty. Methods: Design: Case Report. Setting: Tertiary Government Training Hospital. Patient: One. Result: A 4-month-old boy with a complete midline cleft of the lower lip, alveolus and mandible, and bifid distal tongue that was fused with the floor of the mouth, underwent glossoplasty, cheiloplasty and mentoplasty with subsequent excellent aesthetic outcome and normal oral competency. Conclusion Tessier 30 is a rare congenital midline mandibular cleft. Prompt glossoplasty, cheiloplasty and mentoplasty can correct the gross deformity, restore oral competency, and address functional needs such as feeding, swallowing and early speech development. Future bony repair will hopefully complete the reconstruction.
Mandible ; Cleft Lip ; Tongue Diseases ; Jaw Abnormalities ; Plastic Surgery Procedures

Klippel-Feil syndrome is characterized by congenital fusion of two or more cervical vertebrae, a low hair line at the back of the head, restricted neck mobility, and other congenital anomalies. We report a 16-year-old young man with Klippel-Feil syndrome, Sprengel deformity of the right scapula, thoracic kyphoscoliosis, and mandibular prognathism with an anterior open bite. He was treated with orthodontic treatment and maxillofacial surgery. An anticipated difficult airway due to a short neck with restricted neck movements and extrinsic restrictive lung disease due to severe thoracic kyphoscoliosis increased his anesthesia risk. Due to his deviated nasal septum and contralateral inferior turbinate hypertrophy, we chose awake fiber optic orotracheal intubation followed by submental intubation. Considering the cervical vertebral fusion, he was carefully positioned during surgery to avoid potential spinal injury. He recovered well and his postoperative course was uneventful.
Adolescent ; Anesthesia ; Cervical Vertebrae ; Congenital Abnormalities ; Female ; Genioplasty ; Hair ; Head ; Humans ; Hypertrophy ; Intubation ; Klippel-Feil Syndrome ; Lung Diseases ; Mandible ; Nasal Septum ; Neck ; Open Bite ; Orthognathic Surgery ; Osteotomy ; Prognathism ; Scapula ; Spinal Injuries ; Surgery, Oral ; Turbinates

BACKGROUND: Along with the advances in technology of three-dimensional (3D) printer, it became a possible to make more precise patient-specific 3D model in the various fields including oral and maxillofacial surgery. When creating 3D models of the mandible and maxilla, it is easier to make a single unit with a fused temporomandibular joint, though this results in poor operability of the model. However, while models created with a separate mandible and maxilla have operability, it can be difficult to fully restore the position of the condylar after simulation. The purpose of this study is to introduce and asses the novel condylar repositioning method in 3D model preoperational simulation. METHODS: Our novel condylar repositioning method is simple to apply two irregularities in 3D models. Three oral surgeons measured and evaluated one linear distance and two angles in 3D models. RESULTS: This study included two patients who underwent sagittal split ramus osteotomy (SSRO) and two benign tumor patients who underwent segmental mandibulectomy and immediate reconstruction. For each SSRO case, the mandibular condyles were designed to be convex and the glenoid cavities were designed to be concave. For the benign tumor cases, the margins on the resection side, including the joint portions, were designed to be convex, and the resection margin was designed to be concave. The distance from the mandibular ramus to the tip of the maxillary canine, the angle created by joining the inferior edge of the orbit to the tip of the maxillary canine and the ramus, the angle created by the lines from the base of the mentum to the endpoint of the condyle, and the angle between the most lateral point of the condyle and the most medial point of the condyle were measured before and after simulations. Near-complete matches were observed for all items measured before and after model simulations of surgery in all jaw deformity and reconstruction cases. CONCLUSIONS: We demonstrated that 3D models manufactured using our method can be applied to simulations and fully restore the position of the condyle without the need for special devices.
Chin ; Congenital Abnormalities ; Equidae ; Glenoid Cavity ; Humans ; Jaw ; Joints ; Mandible ; Mandibular Condyle ; Mandibular Osteotomy ; Maxilla ; Methods ; Oral and Maxillofacial Surgeons ; Orbit ; Orthognathic Surgery ; Osteotomy, Sagittal Split Ramus ; Surgery, Oral ; Temporomandibular Joint

OBJECTIVES: The purpose of this study is to compare the postoperative stability of conventional orthognathic surgery to a surgery-first orthognathic approach after bilateral sagittal split ramus osteotomy (BSSRO). MATERIALS AND METHODS: The study included 20 patients who underwent BSSRO for skeletal class III conventional orthognathic surgery and 20 patients who underwent a surgery-first orthognathic approach. Serial lateral cephalograms were analyzed to identify skeletal changes before surgery (T0), immediately after surgery (T1), and after surgery (T2, after 1 year or at debonding). RESULTS: The amount of relapse of the mandible in the conventional orthognathic surgery group from T1 to T2 was 2.23±0.92 mm (P<0.01) forward movement and −0.87±0.57 mm (non-significant, NS) upward movement on the basis of point B and 2.54±1.37 mm (P<0.01) forward movement and −1.18±0.79 mm (NS) upward movement on the basis of the pogonion (Pog) point. The relapse amount of the mandible in the surgery-first orthognathic approach group from T1 to T2 was 3.49±1.71 mm (P<0.01) forward movement and −1.78±0.81 mm (P<0.01) upward movement on the basis of the point B and 4.11±1.93 mm (P<0.01) forward movement and −2.40±0.98 mm (P<0.01) upward movement on the basis of the Pog. CONCLUSION: The greater horizontal and vertical relapse may appear because of counter-clockwise rotation of the mandible in surgery-first orthognathic approach. Therefore, careful planning and skeletal stability should be considered in orthognathic surgery.
Congenital Abnormalities ; Humans ; Mandible ; Orthognathic Surgery* ; Osteotomy, Sagittal Split Ramus* ; Prognathism ; Recurrence

BACKGROUND: Paget's disease of bone leads to change in the shape and size of the bone and results in reduced bone strength, leading to the complications of deformity, arthritis, and fracture. Due to unknown reasons, Paget's disease is rare in Asian descendants. We report the cases of Paget's disease who visited our institute for 15 years and reviewed the literatures. METHODS: We retrospectively reviewed the medical records and radiograms of 8 patients (6 female and 2 male) who were diagnosed as Paget's disease of bone. Diagnosis was confirmed by typical radiological feature in the involved skeletons and/or pathologic findings. RESULTS: Pelvis, skull and spine were three most frequently involved bones. All involved bones in our cases showed changes in shape and trabecular pattern which resulted in bowing of lower extremity, secondary osteoarthritis, compression fracture of spine and enlargement of skull. Mean follow time was 4.71 years and all patient were treated bisphosphonate (BP). Use of BP controlled the level of serum alkaline phosphatase level effectively. CONCLUSIONS: We have reviewed eight patients who were previously diagnosed as Paget's disease of bone in our institute. We could identify typical radiologic and clinical findings such as bowing deformity of long bone, secondary osteoarthritis, compression fracture and osteomyelitis of mandible that deteriorated the quality of their living.
Alkaline Phosphatase ; Arthritis ; Asian Continental Ancestry Group ; Congenital Abnormalities ; Diagnosis ; Diphosphonates* ; Female ; Fractures, Compression ; Humans ; Lower Extremity ; Mandible ; Medical Records ; Osteitis Deformans ; Osteoarthritis ; Osteomyelitis ; Pelvis ; Retrospective Studies ; Skeleton ; Skull ; Spine

Maxillofacial defect comes from congenital defect, trauma and surgical resection. Patients with intraoral defect are commonly related to maxillary defect and they need prosthetic rehabilitation. Functional reconstruction of partially edentulous mandible has many limitations. However, if both condyles are intact, maxillofacial prosthesis using partial denture give competent results. In this case, a patient of 58 year-old male has a defect on palate and left mandibular posterior teeth from gunshot. The maxillary defect of this patient is Class IV according to Aramany classification and the mandibular one is Type V according to Cantor and Curtis classification. For retention of the obturator, remaining teeth are fully utilized and artificial teeth are arranged harmoniously to provide stable occlusion. Mandibular RPD covered limited range of deformed soft tissue derived from mandibular resection surgery. With these treatments, the patient in this case showed improvements in mastication, swallowing and speech.
Classification ; Congenital Abnormalities ; Deglutition ; Denture, Partial ; Denture, Partial, Removable ; Humans ; Male ; Mandible ; Mastication ; Maxillofacial Prosthesis ; Palate ; Rehabilitation* ; Tooth ; Tooth, Artificial

Surgical management of oral cancer results in compromised masticatory and swallowing function which affects patient in social and psychological aspects due to reduced phonetic ability and facial deformity, thus, it is imperative to provide applicable prosthetic treatment to overcome such complications. This clinical study describes rehabilitation of a patient with squamous cell carcinoma treated with marginal mandibulectomy and implantation on preserved posterior portion of mandible to provide stability and support for subsequent denture treatment. Kennedy class IV removable partial denture has provided satisfactory results in esthetics and function. Bone level stability around implants was reported to be maintained during eight months of clinical observation.
Carcinoma, Squamous Cell ; Congenital Abnormalities ; Deglutition ; Denture, Partial, Removable* ; Dentures ; Esthetics ; Humans ; Mandible ; Mouth Neoplasms ; Rehabilitation*

To review the recent progress about the anatomical and radiographical studies of bifid mandibular canal (BMC) in English literature recorded in PubMed from 2006 to 2015 to deepen our understanding of BMC. A BMC is an anatomical variation of the mandibular canal; its occurrence might be a result of the incomplete fusion of mandibular canal during prenatal development. The four types of BMC have been classified according to anatomical location and configuration. Characteristic radiographic features and identifying methods of BMC on panoramic radiography and cone beam computed tomography (CBCT) were described; the visibility of BMC on panoramic radiographs and CBCT images was compared. Clinical value of identifying the location as well as the configuration of BMC for surgical procedures that involve the mandible was discussed.
Cone-Beam Computed Tomography ; Humans ; Mandible ; abnormalities ; anatomy & histology ; diagnostic imaging ; surgery ; Radiography, Panoramic