ObjectiveTo construct a risk prediction model for frequent acute exacerbations of chronic obstructive pulmonary disease （COPD） under disease-syndrome combination， thus providing decision support for precise clinical intervention. MethodsA total of 2 029 patients with acute exacerbations of COPD admitted to the First Affiliated Hospital of Anhui University of Chinese Medicine from January 2020 to August 2024 were retrospectively included. These patients were classified into groups of frequent acute exacerbations （≥2 times/year） and infrequent acute exacerbations （<2 times/year） according to the hospitalization times per year. Risk factors were screened by LASSO regression combined with logistic regression， and a nomogram model was constructed. The model performance was assessed based on the area under the curve （AUC）， calibration curves， and decision curve analysis （DCA）. ResultsThe differences in baseline characteristics between the frequent acute exacerbations group （1 196 cases） and infrequent acute exacerbations group （833 cases） were not statistically significant. LASSO regression combined with multivariate logistic regression screened the following independent risk factors： body mass index （BMI）， hospitalization days， number of smoking years， place of residence， use of noninvasive ventilators， oxygen-demanding therapy， liver cirrhosis， use of systemic glucocorticosteroids， and traditional Chinese medicine syndrome （phlegm and stasis obstructing the lung）. The nomogram model showed good discrimination and calibration in both the training set （AUC=0.748） and validation set （AUC=0.774）. ConclusionThe risk prediction model for frequent acute exacerbations of COPD， integrating traditional Chinese medicine syndrome， constructed in this study has high accuracy. It can provide a scientific basis for early clinical identification of high-risk patients and individualized intervention.

ObjectiveTo explore the differences in attention to the sub-dimensions of satisfaction with the quality of assistive devices among people with different self-care abilities in China, identify the key driving factors, and provide a basis for the precision design and service provision of assistive devices. MethodsBased on the 2023 national survey data, involving 14 030 people with functional impairments, self-care ability was taken as the core independent variable, eight sub-dimensions of satisfaction as dependent variables, and variables such as gender, age, educational level and residential type were controlled. Univariate analysis was performed using Chi-square test with Bonferroni correction, and a binary Logistic regression model was constructed to identify influencing factors. Meanwhile, reliability and validity tests, endogeneity tests (instrumental variable method and propensity score matching) and heterogeneity tests were conducted. ResultsAmong the eight satisfaction sub-dimensions, six presented significant inter-group differences, with Bonferroni correction (threshold = 0.00625). Following binary Logistic regression and endogeneity correction, significant inter-group heterogeneity was confirmed in dimensions such as size and shape. For the affordability dimension, the main effect of self-care ability was not statistically significant, yet prominent urban-rural heterogeneity was observed. Specifically, taking the fully independent (self-care) group as the reference, the fully dependent group attached significantly greater importance to safety (B = 0.253, P < 0.001), comfort (B = 0.153, P = 0.001) and ease of use (B = 0.316, P < 0.001); the partially dependent group showed the highest level of attention to lightweight (B = 0.094, P = 0.027) and durability (B = 0.254, P < 0.001); and the fully independent group demonstrated a relatively stronger preference for aesthetics. ConclusionStratified functional demands, driven by self-care ability, exist in the satisfaction of individuals with functional impairments with assistive devices in China. The policy formulation and product design of assistive devices should shift to a precision-oriented paradigm: prioritize the guarantee of safety, comfort and ease of use for fully dependent groups, optimize lightweight performance and durability for partially dependent groups, enhance aesthetics and social acceptance for fully independent groups, roll out price subsidy policies for urban price-sensitive groups, and strengthen the supply of core functional services for rural groups. This approach will comprehensively improve the adaptation effectiveness of assistive devices and the well-being of users.

OBJECTIVE To formulate Guidelines for the standardized implementation of pharmacist-managed clinics （ 2026 edition ） in response to the challenges faced by such clinics in China， including uneven development， large discrepancies in service specifications， insufficient patient awareness， and limited medical insurance coverage. METHODS Led by the Pharmaceutical Affairs Professional Committee of the Chinese Hospital Association， the Evidence-based Pharmacy Professional Committee of the Chinese Pharmaceutical Association， and the Hospital Pharmacy Professional Committee of the Cross-strait Medical and Health Exchange Association， a total of 19 domestic hospital pharmacy experts were organized. Through a systematic review of national policies and literature research， current practical experience was summarized. Consensus on the contents of the guidelines was reached after in-depth discussions. RESULTS &CONCLUSIONS The guidelines covered five sections： definition and connotation of pharmacist-managed clinics， establishment requirements， implementation and management， post competency， and practical research. Firstly， the definition and connotation included three operational forms of pharmacist-managed clinics （independent mode， physician-pharmacist joint mode， and online pharmacist-managed clinic mode） and classified service modes （specialty-specific， drug-specific， and disease-specific pharmacist-managed clinics）. The establishment requirements were further refined， covering system construction （pharmaceutical service management system， quality control and assessment mechanism）， personnel qualifications （professional credentials， continuing education and professional training， etc）， service recipients， as well as service venues and facilities. Subsequently， the implementation and management of pharmacist-managed clinics were proposed， involving service procedures， intervention measures， documentation and records， patient education and follow-up， humanistic care， as well as risk management and quality control. Finally， post competency encompassed the competency requirements for pharmacists providing services in pharmacist-managed clinics， as well as the suggestions on teaching methods； practical research encouraged the conduct of high-quality pharmaceutical practice in the setting of pharmacist-managed clinics. The guidelines provide valuable guidance for the standardized implementation of pharmacist-managed clinics in China in terms of establishment， management， teaching， and research， fill the guideline gap in this field， and can promote the high-quality development of pharmacist-managed clinics.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

OBJECTIVE: This study reports the first imported case of Lassa fever (LF) in China. Laboratory detection and molecular epidemiological analysis of the Lassa virus (LASV) from this case offer valuable insights for the prevention and control of LF. METHODS: Samples of cerebrospinal fluid (CSF), blood, urine, saliva, and environmental materials were collected from the patient and their close contacts for LASV nucleotide detection. Whole-genome sequencing was performed on positive samples to analyze the genetic characteristics of the virus. RESULTS: LASV was detected in the patient's CSF, blood, and urine, while all samples from close contacts and the environment tested negative. The virus belongs to the lineage IV strain and shares the highest homology with strains from Sierra Leone. The variability in the glycoprotein complex (GPC) among different strains ranged from 3.9% to 15.1%, higher than previously reported for the seven known lineages. Amino acid mutation analysis revealed multiple mutations within the GPC immunogenic epitopes, increasing strain diversity and potentially impacting immune response. CONCLUSION The case was confirmed through nucleotide detection, with no evidence of secondary transmission or viral spread. The LASV strain identified belongs to lineage IV, with broader GPC variability than previously reported. Mutations in the immune-related sites of GPC may affect immune responses, necessitating heightened vigilance regarding the virus.
Humans ; China/epidemiology* ; Genome, Viral ; Lassa Fever/virology* ; Lassa virus/classification* ; Molecular Epidemiology ; Phylogeny