Background With China's socio-economic development, the dietary structure of Chinese residents has gradually shifted from a traditional Eastern pattern characterized by high carbohydrate intake to a relatively high-fat Western dietary model, alongside a growing burden of chronic diseases. However, dietary changes may vary across different occupational groups. Objective To analyze the long-term trends in dietary energy and three major macronutrient intake among various occupational groups aged 18-59 years in nine provinces of China from 1989 to 2018, providing a scientific basis for developing occupation-specific dietary intervention strategies. Methods Based on 11 waves of data (1989–2018) from the China Health and Nutrition Survey (CHNS), 57458 employed individuals aged 18-59 years were selected as observation subjects after applying inclusion and exclusion criteria. Joinpoint regression was used to analyze temporal trends by calculating the annual percentage change (APC) and average annual percentage change (AAPC) with 95% confidence intervals. The analysis covered the energy supply ratio from the three major macronutrients and the proportion of the participants within the acceptable macronutrient distribution ranges (AMDR) for the total occupational population and specific occupational group. Results From 1989 to 2018, the dietary structure of the occupational population in the nine provinces gradually Westernized. The carbohydrate energy supply ratio showed a decreasing trend (AAPC=−0.77%, 95%CI: −1.00%, −0.55%, P<0.05), while the fat energy supply ratio increased (AAPC=1.42%, 95%CI: 1.07%, 1.77%, P<0.05). The protein energy supply ratio remained largely unchanged (AAPC=−0.19%, 95%CI: −0.08%, 0.46%, P>0.05), and the total energy intake declined (AAPC=−0.62%, 95%CI: −0.94%, −0.30%, P<0.05). Among the occupational groups studied, white-collar workers were the first to show characteristics of dietary Westernization. Using the AMDR as the criterion, their average fat energy supply ratio first exceeded the AMDR upper limit (30%) in 1993, and their average carbohydrate energy supply ratio first fell below the AMDR lower limit (50%) in 2006, both time points being earlier than other occupational groups. Agricultural workers lagged in this transition (their average fat energy supply ratio first reached ≥30% in 2011), but their rate of increase in the fat energy supply ratio was the fastest among all occupational groups (AAPC=1.59%, 95%CI: 0.90%, 2.30%, P<0.05; P for trend comparison between groups<0.05). The other three occupational groups (blue-collar workers, service workers, and others) generally fell between these two extremes. Taking the fat energy supply ratio as an example, their AAPCs of increase were 1.02% (95%CI: 0.73%, 1.32%, P<0.05) for blue-collar workers, 0.85% (95%CI: 0.61%, 1.09%, P<0.05) for service workers, and 0.88% (95%CI: 0.58%, 1.17%, P<0.05) for others. Conclusion From 1989 to 2018, the macronutrient structure of the occupational population aged 18-59 years in nine China provinces is gradually Westernized. The energy supply ratios of carbohydrates and proteins primarily face issues of potential inadequacy, while the fat energy supply ratio is excessively high. Furthermore, the patterns of change vary among different occupational groups. It is recommended to propose personalized dietary advice tailored to specific occupations.

Background With China's socioeconomic development, significant lifestyle changes have occurred among occupational groups, leading to alterations in cardiovascular metabolic risk factors. However, few studies have examined the secular trends of these risk factors in China's working population. Objective To analyze the trends in cardiovascular metabolic risk factors among the occupational population in nine provinces of China from 2009 to 2018, and to explore the associations between different occupational types and these risk factors, along with their clustering patterns, thereby providing evidence for targeted interventions. Methods This study utilized data from the China Health and Nutrition Survey (CHNS) in 2009, 2015, and 2018. The dataset covered 13274 employed individuals aged 18-59 years. Only participants with complete blood test results and physical measurement data were included in the final analysis. The average annual percentage change (AAPC) in the positive rates of risk factors was calculated using Joinpoint regression to analyze temporal trends. Multinomial logistic regression and binary logistic regression models were employed to examine the cross-sectional associations between occupational types (categorized as white-collar workers, agricultural workers, blue-collar workers, service workers, and others) and nine cardiovascular metabolic risk factors and their clustering (defined as having ≥2 risk factors) in 2018. Results A total of 8451 participants were included. From 2009 to 2018, significant increasing trends (AAPC>0, P<0.05) were observed for overweight, obesity, central obesity, borderline elevated triglycerides (TG), borderline elevated to elevated total cholesterol (TC), borderline elevated low-density lipoprotein cholesterol (LDL-C), elevated blood pressure and hypertension, diabetes. The most rapid increases were found for obesity (AAPC=6.07%, 95%CI: 3.42%, 8.88%), hypertension (AAPC=4.10%, 95%CI: 0.62%, 7.77%), and central obesity (AAPC=3.27%, 95%CI: 1.24%, 5.36%). The clustering rate of risk factors increased from 62.3% in 2009 to 73.2% in 2018 (AAPC=1.87%, 95%CI: 1.02%, 2.73%). The cross-sectional analysis in 2018, after adjusting for confounders, showed that compared with white-collar workers, blue-collar workers had a significantly lower risk of overweight (OR=0.67, 95%CI: 0.48, 0.95), central obesity (OR=0.65, 95%CI: 0.45, 0.92), and borderline high TG (OR=0.54, 95%CI: 0.35, 0.82). In contrast, agricultural workers had a higher risk of hypertension (OR=1.76, 95%CI: 1.14, 2.72). Conclusion Between 2009 and 2015, the burden of most cardiometabolic risk factors increases significantly among the Chinese occupational population, with the rate of increase slowing by 2018. Risks vary across occupational types, among which blue- collar workers report lower target outcomes. Targeted interventions focusing on the rapidly increasing risk factors and high-risk occupational groups are recommended.

Background The global prevalence of obesity is on the rise and is closely associated with various chronic non-communicable diseases such as cardiovascular diseases and diabetes. There is a relative lack of long-term dynamic studies on compound obesity among occupational populations. Objective To explore the changing trends of compound obesity among different occupational groups aged 18–59 years in nine provinces (autonomous regions, municipalities) of China from 1993 to 2018, and to provide a scientific basis for formulating targeted weight management strategies for occupational populations. Methods A total of 34519 employed adults aged 18–59 years from nine waves of the China Health and Nutrition Survey in1993, 1997, 2000, 2004, 2006, 2009, 2011, 2015, and 2018 were included. Obesity types were determined according to the Chinese Adult Weight Management Guidelines. The Joinpoint regression model was used to calculate the average annual percentage change (AAPC) and annual percentage change (APC) of compound obesity rates. Results From 1993 to 2018, the age-standardized compound obesity rate among the occupational population aged 18–59 years showed an upward trend (AAPC=6.24%, 95%CI: 5.09%, 7.41%, P<0.05). The AAPCs (95%CI) for age-standardized compound obesity rates among agricultural workers, blue-collar workers, other occupational groups, service workers, and white-collar workers were 9.55% (7.51%, 11.64%), 6.18% (4.70%, 7.69%), 5.53% (2.27%, 8.90%), 4.07% (2.40%, 5.77%), and 3.89% (2.16%, 5.65%), respectively, with statistically significant differences (P<0.05). Among males, the AAPCs (95%CI) for age-standardized compound obesity rates among agricultural workers, blue-collar workers, other occupational groups, service workers, and white-collar workers were 11.52% (7.71%, 15.47%), 7.28% (6.18%, 8.40%), 5.92% (2.28%, 9.69%), 5.56% (2.11%, 9.12%), and 4.22% (2.33%, 6.15%), respectively, with statistically significant differences (P<0.05). Among females, the AAPCs (95%CI) for age-standardized compound obesity rates among agricultural workers, blue-collar workers, and white-collar workers were 7.45% (6.22%, 8.69%), 3.72% (0.84%, 6.67%), and 2.41% (0.17%, 4.70%), respectively, with statistically significant differences (P<0.05). A turning point was observed in the compound obesity rate among female white-collar workers in 2006, with an APC (95%CI) of 9.69% (5.24%, 14.33%) from 2006 to 2008, showing a statistically significant difference (P<0.05), while no significant trend was found from 1993 to 2006 (P>0.05). No significant trends were observed in the age-standardized compound obesity rates among females in other occupational groups and service workers (P>0.05). Conclusion The compound obesity rate among China's occupational population is increasing rapidly, with the growth rate among agricultural workers being particularly prominent. In 2018, male white-collar workers and female agricultural workers exhibit relatively high compound obesity rates, warranting focused attention. Although the overall growth rate among service workers is slower, the expanding workforce in this sector indicates that obesity remains a serious issue. Targeted occupational health and weight management interventions are needed in the future.

Background With rising obesity rates and earlier hypertension onset among occupational populations, there is an urgent need to elucidate the long-term cardiovascular impacts of dynamic body weight patterns. Current evidence lacks trajectory modeling studies examining occupation-specific prevention strategies. Objective To investigate the association between long-term body mass index (BMI) trajectories and incident hypertension risk in Chinese working adults, and to examine occupation-specific heterogeneity in this relationship. Methods A dynamic sub-cohort of 4 413 occupational participants was constructed from ten survey waves (1991–2018) of the China Health and Nutrition Survey (CHNS). Eligible individuals had valid key BMI records at three or more independent follow-ups before the outcome event; the individual baseline was set as the year of their first participation in the survey. Group-based trajectory modeling (GBTM) was used to identify BMI change patterns. Cox proportional hazards regression was used to calculate hazard ratios (HRs) and 95% confidence interval (CI) for hypertension incidence across trajectory groups, with stratified analysis by occupational categories. Results Among 4413 occupational participants, 1441 incident hypertension cases were reported during the follow-up window. Three long-term BMI trajectories were identified: low-stable, moderate-slowly rising, and high-rising. In Model 3 with all selected confounders adjusted, compared with the low-stable group, the moderate-slowly rising group showed a significantly higher risk of incident hypertension (HR=1.28, 95%CI: 1.12, 1.45; P < 0.001), as did the high-increasing group (HR=1.80, 95%CI: 1.45, 2.23; P < 0.001). The stratified analyses revealed occupational differences in the association. Among agricultural workers, the moderate-slowly rising group (HR=1.35, 95%CI: 1.15, 1.57) and the high-rising group (HR=2.00, 95%CI: 1.50, 2.66) both exhibited significantly increased risks of hypertension (P<0.001). Conversely, among white-collar workers, an increased risk of hypertension was observed only in the high-rising group (HR=1.97, 95%CI: 1.23, 3.17; P<0.05). Conclusion Rapid BMI escalation constitutes a significant risk factor for incident hypertension in occupational populations. Targeted long-term weight monitoring and tailored interventions are recommended for high-risk occupations.

Objective To evaluate the cost–utility of lecanemab and donanemab in the treatment of early Alzheimer’s disease （AD） in China. Methods A Markov model was developed from a societal perspective to compare standard of care （SOC）, lecanemab plus SOC, and donanemab plus SOC in terms of costs, quality-adjusted life years （QALY）, and incremental cost–utility ratios （ICUR）. Deterministic and probabilistic sensitivity analyses were conducted to assess parameter uncertainty. Results Both intervention strategies increased QALY compared with SOC but were associated with substantially higher costs, and neither was cost-effective under the current willingness-to-pay threshold. Conclusion Lecanemab and donanemab may be more appropriately considered within a multi-tiered healthcare reimbursement framework in China rather than relying solely on basic medical insurance.

Objective: To optimize the technology and process for recovering immune cells from discarded leukocyte filter through reverse flushing, and to investigate the effects of different reverse flushing solutions and physical conditions (temperature, soaking, and ultrasound) on the cell recovery rate. Additionally, to evaluate the feasibility and quality of isolating and culturing NK cells from the recovered cells. Methods: Normal saline, PBS, and PBS-EDTA were used as reverse flushing solutions to backwash the filter, and the white blood cell recovery rates were compared. The reverse flushing efficiency was optimized by adjusting the temperature of the reverse flushing solution, filter soaking treatment and ultrasonic treatment. The Ficoll separation method was employed to isolate peripheral blood mononuclear cells (PBMCs) from the elution solution and conduct in vitro expansion and culture. Lymphocyte subsets were identified and quantified using flow cytometry. Results: The physiological saline served as the backflush fluid was the most stable. The reverse temperature had a significant impact on the recovery rate of white blood cell subgroups. The recovery rates of lymphocytes and monocytes at 37℃ were significantly higher than those at 4℃ [(35.56±5.55)% vs (22.88±0.31)%, (32.42±4.82)% vs (8.00±1.6)%, t=5.581 and 5.758, respectively, both P<0.001)], and at 25℃ [(35.56±5.55)% vs (22.42±6.13)%, t=5.904, P<0.001; (32.4±4.82)% vs (21.11±1.23)%, t=2.629, P=0.030)]. The recovery rates of white blood cell subgroups after 37℃ immersion were higher than those after direct reverse flow at 37℃, but the difference was not statistically significant (P>0.05). The recovery rate of cells after ultrasonic immersion at 25℃ was further increased compared to that after immersion at 25℃, but the difference was not statistically significant (P>0.05). The purity of the NK cells obtained through sorting reached (94.2±4.5)%, and the viability was (94.8±0.9)%. After 15 days of culture, the cell count was expanded approximately 450 times, yielding more than 10 /mL highly active NK cells. Conclusion: By optimizing the backflushing process, immune cells can be efficiently recovered from discarded filters. The 37℃ backflow liquid has the best backflow effect; soaking and ultrasonic treatment can be used as auxiliary methods to improve recovery rates. The NK cells from this source have high purity, good activity, and strong expansion ability, and can be used as a reliable cell source for immunotherapy research, and in line with the circular economy concept of resource reuse.

Objective To analyze the computed tomography(CT)imaging features of urachal carcinoma and evaluate its diagnostic value.Methods The clinical data of 20 patients with urachal carcinoma confirmed by surgery and pathology,who were admitted to The First Affiliated Hospital of Naval Medical University from Dec.2012 to Dec.2022,were collected.Seventeen of the 20 patients underwent enhanced CT urography and 3 underwent pelvic CT plain scan+enhanced scan.After scanning,multiplanar reconstruction was performed on the post-processing workstation.The general data,clinical symptoms,CT imaging findings,pathological data,and prognosis of the patients were analyzed and summarized.Results The patients included 16 males and 4 females,aged 27 to 75 years old,with a median age of 61.50(41.50,71.25)years old.The tumors were all located in the anterior wall of the bladder,along the urachus,with a maximum diameter of 1.72-5.55 cm and a median maximum diameter of 3.34(2.48,3.71)cm.Fourteen cases had cystic-solid lesions and 6 had solid lesions.In the cystic-solid lesions,9 cases showed the"upper cystic and lower solid"sign on the sagittal plane.Calcification was noted in 17 cases.After enhanced scanning,18 cases showed progressive enhancement,and 2 cases showed"fast in and fast out"enhancement.Tumor invasion extended beyond the urachus and/or bladder muscle layer in 19 cases.At the end of follow-up,3 cases had recurrence,2 had metastasis,5 had no recurrence after surgery,3 died,and 7 were lost to follow-up.Conclusion Urachal carcinoma has certain characteristic manifestations on CT imaging.Reconstructing the sagittal plane with enhanced CT scanning and multiplanner reformation can help preoperative diagnosis and prognostic evaluation of urachal carcinoma.

Vaccination is one of the most cost-effective measures for preventing and controlling infectious diseases.In recent years, there has been a growing public demand for knowledge about vaccines and vaccine-preventable diseases, which has placed higher requirements on the capacity and quality of immunization services. However, "vaccine hesitancy" has become an increasingly prominent issue. In 2019, the World Health Organization (WHO) listed it as one of the top ten global health threats, and it is gradually becoming a major challenge for immunization programs worldwide. Therefore, current immunization programs need to actively innovate in publicity and communication strategies to enhance public willingness for voluntary vaccination, improve awareness and trust in vaccines, and further reinforce the understanding of their critical role in infectious disease prevention and control. This paper examines the challenges and circumstances faced by vaccination publicity and communication in the new era, and proposes relevant recommendations, aiming to provide reference for developing new models of publicity and communication.

Objective Based on the phosphatidylinositol kinase(PI3K)/protein kinase B(AKT)pathway and M2 polarization of macrophages,the effects of polydatin on malignant phenotype of osteosarcoma cells were investigated.Methods The macrophages were divided into M0 group,M2 group,polydatin group,and polydatin+PI3K pathway agonist 740Y-P group.The expression of arginase-1(Arg-1)and CD206 mRNAs and proteins in macrophages were detected by RT-qPCR and Western blot.Western blot was used to detect p-PI3K/PI3K and p-AKT/AKT protein expression in macrophages.The osteosarcoma cells MG-63 were divided into control group,control group(RPMI-1640 medium culture),CM-M0 group(M0 group M0 macrophage supernatant is collected for osteosarcoma cells),CM-M2 group(M2 group M2 macrophage supernatant is collected for osteosarcoma cells),CM-polydatin group(M2 macrophage supernatant in the polydatin group was collected on osteosarcoma cells),and CM-polydatin+740Y-P group(M2 macrophage supernatant was collected on osteosarcoma cells in the CM-polydatin+740Y-P group).Edu staining assay was used to detect the proliferation of MG-63 cells.Scratches and Transwell assays were used to detect the migration and invasion of MG-63 cells.Results Compared with the M0 group,the Arg-1,CD206,IL-10,p-PI3K/PI3K,p-AKT/AKT increased in the M2 group significantly(P<0.05).Compared with the M2 group,the Arg-1,CD206,IL-10,p-PI3K/PI3K,p-AKT/AKT decreased in the polydatin group significantly(P<0.05).Compared with the polydatin group,the Arg-1,CD206,IL-10,p-PI3K/PI3K,p-AKT/AKT increased in the polydatin+740Y-P group significantly(P<0.05).Compared with the CM-M0 group,the proportion of Edu-positive cells in the CM-M2 group increased significantly(P<0.05),and MG-63 cell migration and invasion rates increased significantly(P<0.05).Compared with the CM-M2 group,the proportion of Edu-positive cells in the CM-polydatin group decreased significantly(P<0.05),and MG-63 cell migration and invasion rates decreased significantly(P<0.05).Compared with the CM-polydatin group,the proportion of Edu-positive cells in the CM-polydatin+740Y-P group increased significantly(P<0.05),and MG-63 cell migration and invasion rates increased significantly(P<0.05).Conclusion Polygonum cuspidatum can inhibit the proliferation,migration and invasion of osteosarcoma cells by inhibiting the M2 polarization of macrophages,and its mechanism may be related to the inhibition of PI3K/AKT signaling pathway.

BACKGROUND:Knee finite element modelling can provide insight into knee mechanics,but its complex image segmentation is more difficult for researchers.With the development of deep learning techniques,deep learning techniques have been widely used in knee joint finite element modelling.OBJECTIVE:To replace the manual segmentation step in finite element modelling of the knee joint by using 3D Swin UNETR in combination with a semi-automatic segmentation technique for statistical shape models.METHODS:Manual(artificial)knee joint finite element model was developed based on MR and semi-automatic knee joint finite element model was developed based on 3D Swin UNETR+statistical shape model segmentation.The same loads and boundary conditions were applied to both models.Validation was performed by calculating the Dice similarity coefficient,mean distance,and comparing the peak equivalent stresses,maximum principal stresses,and maximum shear stresses of the two models.RESULTS AND CONCLUSION:(1)The Dice similarity coefficients of the manual and semi-automatic segmented femur and tibia were more than 98％,and the average distances were less than or equal to(0.35±0.08)mm.(2)With the longitudinal load of 750 N and 10 Nm internal overturning moment applied to the femur tip of both manual and semi-automatic finite element models,the peak equivalent stress,maximum principal stress,and maximum shear stresses of meniscus in manual finite element model were 14.12,18.54,and 7.35 MPa;peak equivalent force,maximum principal stress,and maximum shear stress of femoral cartilage were 2.22,2.15,and 1.18 MPa;peak equivalent force,maximum principal stress,and maximum shear stress of tibial cartilage were 2.50,1.91,and 1.41 MPa;semi-automatic finite element model of meniscus:peak equivalent force,maximum principal stress,and maximum shear stress were 14.93,18.53,and 7.75 MPa.The peak equivalent force,maximum principal stress,and maximum shear stress of femoral cartilage were 2.26,2.18,and 1.20 MPa;the peak equivalent stress,maximum principal stress,and maximum shear stress of tibial cartilage were 2.60,1.91,and 1.46 MPa.The peak equivalent stress,maximum principal stress,and maximum shear stress of manual and semi-automatic finite element models were basically consistent,with no significant difference(P＞0.05).(3)The semi-automatic segmentation technique proposed in this study can replace manual segmentation in creating accurate finite element models of the knee joint.