Epicardial adipose tissue(EAT)is a type of fat tissue that is closely adjacent to the coronary arteries and myocardium,and it caused physiological and pathological changes to the body through the secretion of autocrine and paracrine active factors.EAT is regarded as a diagnostic marker and a potential therapeutic target for cardiovascular diseases,and it is of great significance to segment and quantify EAT.This article introduced the evolution of the EAT segmentation and quantification methods from the aspects of traditional imaging,atlas,and artificial intelligence.Furthermore,it reviewed the research progresses on automatically quantified EAT indices in the diagnosis and treatment of cardiovascular diseases.

Objective To observe the value of contrast-enhanced ultrasound(CEUS)for diagnosing malignant adnexal tumors.Methods Totally 112 patients with single adnexal masse were retrospectively enrolled and divided into benign adnexal tumor group(benign group,n=73)and malignant adnexal tumor group(malignant group,n=39).Clinical data,laboratory indicators,ovarian-adnexal ultrasound reporting and data system(O-RADS)classification based on conventional ultrasound(US),CEUS manifestations and CEUS classification of benign and malignant tumors were compared between groups.Multivariable logistic regression analysis of clinical and laboratory indicators being statistically different between groups,as well as US O-RADS classification and CEUS classification was performed to screen the independent predictors of malignant adnexal tumors,and combined models were constructed using forward stepwise regression method.The efficacy of each independent predictor and combined model for diagnosing malignant adnexal tumors was analyzed.Results Statistical differences of carbohydrate antigen 125(CA125),US O-RADS classification,enhancement time and level of CEUS,as well as CEUS classification were found between groups(all P＜0.05).CA125,US O-RADS classification and CEUS classification were all independent predictors of malignant adnexal tumors(all P＜0.05).Combined model Ⅰ,Ⅱ and Ⅲ were constructed based on CA125+CEUS classification,US O-RADS classification+CEUS classification and CA125+US O-RADS classification+CEUS classification,respectively.The area under the curve(AUC)of single CA125 level,US O-RADS classification,CEUS classification and combined model Ⅰ,Ⅱ and Ⅲ for diagnosing malignant adnexal tumor was 0.708,0.809,0.908,0.918,0.945 and 0.954,respectively.AUC of combined model Ⅲ was higher than that of combined model Ⅰ(Z=-2.142,P=0.032),while no significant difference of AUC was found between combined model Ⅱ and Ⅰ nor Ⅱ and Ⅲ(both P＞0.05).Conclusion CEUS could be used to effectively diagnose malignant adnexal tumor.Combining with CA125 level and US O-RADS classification could significantly improve its diagnostic efficacy.

Objective:To evaluate the prognosis of Hall technique and traditional performed metal crown (PMC) restoration technique, and to follow up the occlusal changes before and after treatment with Hall technique, providing references for the promotion of Hall technique.Methods:Children who visited the Department of Pediatric Dentistry, West China Hospital of Stomatology, Sichuan University from May 2021 to December 2022 were screened according to the inclusion and exclusion criteria. The therapeutic effects of the two groups were followed up at three time points: 1, 2 and 3 months after operation. The observation results were divided into three outcomes: success (crown in place, no symptoms of pulpitis or periapical periodontitis, no obvious abnormality in occlusion, no need for further treatment), partial failure (crown falling off or crown broken, tooth defect can be repaired, reversible pulpitis) and complete failure (irreversible pulpitis or periapical periodontitis, crown falling off and tooth defect irreparable), and statistical analysis was made. At the same time, the Hall technique group was followed up at five time points as before operation, immediately after operation, 2 weeks after operation, 4 weeks after operation and 8 weeks after operation respectively, in which the occlusion was analyzed by Dental Prescale Ⅱ system. The vertical dimension of occlusion (VDO), overbite and coverage, and canine relationship were recorded and compared. Three-dimensional finite element method was used to model and analyze the stress of the teeth treated with traditional PMC treatment and Hall technique, and the differences between them were compared.Results:Finally, 21 children were included in the Hall technique group, including 12 boys and 9 girls, with age of (5.0±1.4) years. Meanwhile, 22 children including 15 boys and 7 girls were in the traditional PMC group, with age of (5.1±1.3) years. There were 0 cases of complete failure and 0 cases of partial failure both in the Hall technique group and in the traditional PMC group within 1 month. There were 0 cases of complete failure and 1 case of partial failure in the Hall technique group, while 0 cases of complete failure and 0 cases of partial failure in the traditional PMC group within 2 months after operation. Hall technique group failed completely in 1 case and partially in 1 case, while the traditional pre-crown group failed completely in 0 cases and partially in 0 cases 3 months after operation. There was no significant difference in the incidence of primary index/complete failure and secondary index/partial failure between Hall technique group and traditional PMC group (all P>0.05). The occlusal area and occlusal force of children treated with Hall technique decreased immediately after operation compared with those before operation, but gradually recovered to the preoperative level at 2, 4 and 8 weeks after operation. To elaborate, the occlusal area decreased significantly from (14.79±3.55) mm 2 before operation to (10.15±3.17) mm 2 immediately after operation ( P=0.001), and recovered to (15.58±3.39) mm 2 at 8 weeks after operation ( P>0.05 compared with pre-operation). The occlusal force decreased significantly from (436.94±109.59) N before operation to (292.70±96.05) N immediately after operation ( P=0.001), and recovered to (441.86±104.31) N at 8 weeks after operation ( P>0.05 compared with pre-operation). Overbite decreased significantly from (2.54±1.05) mm before operation to (1.80±0.94) mm immediately after operation ( P=0.044) and then recovered to (2.35±1.02) mm ( P>0.05 compared with pre-operation). The coverage changed from (2.41±0.66) mm before operation to (2.27±0.61) mm immediately after operation ( P>0.05) and then recovered to (2.48±0.62) mm ( P>0.05 compared with pre-operation). The canine relationship was (3.12±0.54) mm before operation, and decreased significantly immediately after operation (2.17±0.89) mm ( P=0.001), and recovered to (3.05±0.61) mm after 8 weeks ( P>0.05 compared with pre-operation). In the three-dimensional finite element analysis, the maximum stress of all parts of the affected tooth increased immediately after Hall technique treatment, but with occlusal adjustment, the maximum stress of all parts of the affected tooth decreased, which was similar to that of the traditional metal pre-crown group. The vertical load and oblique load of pre-crown decreased from 180.11 and 496.16 MPa to 108.05 and 297.69 MPa, respectively. The vertical load and oblique load of enamel decreased from 94.83 and 255.94 MPa to 57.21 and 156.44 MPa, respectively. The vertical load and oblique load of dentin decreased from 55.19 and 124.77 MPa to 33.19 and 74.59 MPa, respectively. Conclusions:During the experimental observation period, there is no obvious difference between Hall technique and traditional PMC treatment technology in terms of post-treatment occlusion and clinical prognosis, which supports clinical application.

Objective:To evaluate the prognosis of Hall technique and traditional performed metal crown (PMC) restoration technique, and to follow up the occlusal changes before and after treatment with Hall technique, providing references for the promotion of Hall technique.Methods:Children who visited the Department of Pediatric Dentistry, West China Hospital of Stomatology, Sichuan University from May 2021 to December 2022 were screened according to the inclusion and exclusion criteria. The therapeutic effects of the two groups were followed up at three time points: 1, 2 and 3 months after operation. The observation results were divided into three outcomes: success (crown in place, no symptoms of pulpitis or periapical periodontitis, no obvious abnormality in occlusion, no need for further treatment), partial failure (crown falling off or crown broken, tooth defect can be repaired, reversible pulpitis) and complete failure (irreversible pulpitis or periapical periodontitis, crown falling off and tooth defect irreparable), and statistical analysis was made. At the same time, the Hall technique group was followed up at five time points as before operation, immediately after operation, 2 weeks after operation, 4 weeks after operation and 8 weeks after operation respectively, in which the occlusion was analyzed by Dental Prescale Ⅱ system. The vertical dimension of occlusion (VDO), overbite and coverage, and canine relationship were recorded and compared. Three-dimensional finite element method was used to model and analyze the stress of the teeth treated with traditional PMC treatment and Hall technique, and the differences between them were compared.Results:Finally, 21 children were included in the Hall technique group, including 12 boys and 9 girls, with age of (5.0±1.4) years. Meanwhile, 22 children including 15 boys and 7 girls were in the traditional PMC group, with age of (5.1±1.3) years. There were 0 cases of complete failure and 0 cases of partial failure both in the Hall technique group and in the traditional PMC group within 1 month. There were 0 cases of complete failure and 1 case of partial failure in the Hall technique group, while 0 cases of complete failure and 0 cases of partial failure in the traditional PMC group within 2 months after operation. Hall technique group failed completely in 1 case and partially in 1 case, while the traditional pre-crown group failed completely in 0 cases and partially in 0 cases 3 months after operation. There was no significant difference in the incidence of primary index/complete failure and secondary index/partial failure between Hall technique group and traditional PMC group (all P>0.05). The occlusal area and occlusal force of children treated with Hall technique decreased immediately after operation compared with those before operation, but gradually recovered to the preoperative level at 2, 4 and 8 weeks after operation. To elaborate, the occlusal area decreased significantly from (14.79±3.55) mm 2 before operation to (10.15±3.17) mm 2 immediately after operation ( P=0.001), and recovered to (15.58±3.39) mm 2 at 8 weeks after operation ( P>0.05 compared with pre-operation). The occlusal force decreased significantly from (436.94±109.59) N before operation to (292.70±96.05) N immediately after operation ( P=0.001), and recovered to (441.86±104.31) N at 8 weeks after operation ( P>0.05 compared with pre-operation). Overbite decreased significantly from (2.54±1.05) mm before operation to (1.80±0.94) mm immediately after operation ( P=0.044) and then recovered to (2.35±1.02) mm ( P>0.05 compared with pre-operation). The coverage changed from (2.41±0.66) mm before operation to (2.27±0.61) mm immediately after operation ( P>0.05) and then recovered to (2.48±0.62) mm ( P>0.05 compared with pre-operation). The canine relationship was (3.12±0.54) mm before operation, and decreased significantly immediately after operation (2.17±0.89) mm ( P=0.001), and recovered to (3.05±0.61) mm after 8 weeks ( P>0.05 compared with pre-operation). In the three-dimensional finite element analysis, the maximum stress of all parts of the affected tooth increased immediately after Hall technique treatment, but with occlusal adjustment, the maximum stress of all parts of the affected tooth decreased, which was similar to that of the traditional metal pre-crown group. The vertical load and oblique load of pre-crown decreased from 180.11 and 496.16 MPa to 108.05 and 297.69 MPa, respectively. The vertical load and oblique load of enamel decreased from 94.83 and 255.94 MPa to 57.21 and 156.44 MPa, respectively. The vertical load and oblique load of dentin decreased from 55.19 and 124.77 MPa to 33.19 and 74.59 MPa, respectively. Conclusions:During the experimental observation period, there is no obvious difference between Hall technique and traditional PMC treatment technology in terms of post-treatment occlusion and clinical prognosis, which supports clinical application.

Objective:To develop a simple and effective subretinal injection pipeline system to enhance the accuracy and precision of subretinal injection volume control.Methods:A retrospective case series study. From May to October 2023, 18 patients (18 eyes) with submacular hemorrhage (SMH) who continuously received modified subretinal injection treatment in Department of Ophthalmology of Peking Union Medical College Hospital were included in the study. Among them, there were 10 males and 8 females. The mean age was (60.00±7.41) years. The primary causes included polypoid choroidal vasculopathy (14 cases), retinal macroaneurysm (2 cases), traumatic retinopathy (1 case), and Valsalva retinopathy (1 case). Hemorrhage affected 14 eyes of the fovea centralis. All affected eyes underwent standard three-channel 25G vitrectomy via the flat part of the ciliary body combined with modified subretinal injection of recombinant tissue plasminogen activator. The improved injection system consisted of a 1 ml syringe, a Q-Syte TM connector, a 41G subretinal microinjection needle, a converter and a viscoelastic substance control pipeline. The drug preparation time for subretinal injection (i.e., the time consumed by the system connection step), the injection time, whether bubbles occur during the injection process, and the perioperative complications were recorded and analyzed. Results:The preparation time prior to drug injection ranged from 230 to 335 seconds, while the injection completion time varied between 43 and 75 seconds. Both times decreased progressively as operator proficiency improved. Among the treated eyes, five received a target injection dose of 0.05 ml and thirteen received 0.10 ml, with all eyes achieving the preset dose accurately. No subretinal bubbles were observed during the injection procedure. Additionally, no intraoperative complications such as retinal hemorrhage or tear secondary to mechanical trauma at the injection site were recorded. Postoperatively, one eye developed anterior chamber hemorrhage, which resolved following intraocular pressure-lowering treatment. No other postoperative complications, including hemorrhage, rhegmatogenous retinal detachment, or infection, were observed in the remaining eyes.Conclusion:The retinal drug injection system developed in this study has a simple structure, safe and stable operation, can achieve precise drug injection, and effectively avoid the formation of bubbles.

Objective:To establish the UPLC fingerprint evaluation system of Viticis Fructus; To comprehensively evaluate the quality of Viticis Fructus and its processed products combining with multivariate statistical methods and compositional variance analysis.Methods:19 batches of Viticis Fructus from different regions were collected and processed by frying process into decoction pieces. The separation was operated on Waters CORTECS T3 C18 chromatographic column (100 mm × 2.1 mm, 1.6 μm). Acetonitrile and 0.1% phosphoric acid water were used as mobile phases for gradient elution, to establish the UPLC fingerprints of Viticis Fructus. The UPLC fingerprints of Viticis Fructus were analyzed using similarity evaluation, principal component analysis (PCA), partial least squares-discriminant analysis (PLS-DA). The contents of seven active components in the samples of Viticis Fructus and fried Viticis Fructus were determined.Results:A total of 26 common peaks were identified in the fingerprints of 38 batches of samples, and 7 components were identified. Similarity evaluation results demonstrated that the chemical components of Viticis Fructus from Jingdezhen City, Jiangxi Province, were significantly different from those of other regions. The results of PCA and PLS-DA analysis showed that the chemical components of Viticis Fructus and fried Viticis Fructus could be clearly distinguished, and the processing process had an impact on the components. The results of content determination showed that the contents of some components increased or decreased after frying. The analysis results of grey correlation method and TOPSIS method show that the medicinal materials in Jiujiang City, Jiangxi Province have a high score ranking and stable quality.Conclusion:This study successfully establishes the fingerprints of Viticis Fructus and its processed products, grey correlation method and TOPSIS method analysis revealed the quality differences of samples from different origins, which providing a scientific basis for the quality control and evaluation of Viticis Fructus and its processed products.

Objective To observe the value of contrast-enhanced ultrasound(CEUS)for diagnosing malignant adnexal tumors.Methods Totally 112 patients with single adnexal masse were retrospectively enrolled and divided into benign adnexal tumor group(benign group,n=73)and malignant adnexal tumor group(malignant group,n=39).Clinical data,laboratory indicators,ovarian-adnexal ultrasound reporting and data system(O-RADS)classification based on conventional ultrasound(US),CEUS manifestations and CEUS classification of benign and malignant tumors were compared between groups.Multivariable logistic regression analysis of clinical and laboratory indicators being statistically different between groups,as well as US O-RADS classification and CEUS classification was performed to screen the independent predictors of malignant adnexal tumors,and combined models were constructed using forward stepwise regression method.The efficacy of each independent predictor and combined model for diagnosing malignant adnexal tumors was analyzed.Results Statistical differences of carbohydrate antigen 125(CA125),US O-RADS classification,enhancement time and level of CEUS,as well as CEUS classification were found between groups(all P＜0.05).CA125,US O-RADS classification and CEUS classification were all independent predictors of malignant adnexal tumors(all P＜0.05).Combined model Ⅰ,Ⅱ and Ⅲ were constructed based on CA125+CEUS classification,US O-RADS classification+CEUS classification and CA125+US O-RADS classification+CEUS classification,respectively.The area under the curve(AUC)of single CA125 level,US O-RADS classification,CEUS classification and combined model Ⅰ,Ⅱ and Ⅲ for diagnosing malignant adnexal tumor was 0.708,0.809,0.908,0.918,0.945 and 0.954,respectively.AUC of combined model Ⅲ was higher than that of combined model Ⅰ(Z=-2.142,P=0.032),while no significant difference of AUC was found between combined model Ⅱ and Ⅰ nor Ⅱ and Ⅲ(both P＞0.05).Conclusion CEUS could be used to effectively diagnose malignant adnexal tumor.Combining with CA125 level and US O-RADS classification could significantly improve its diagnostic efficacy.

Epicardial adipose tissue(EAT)is a type of fat tissue that is closely adjacent to the coronary arteries and myocardium,and it caused physiological and pathological changes to the body through the secretion of autocrine and paracrine active factors.EAT is regarded as a diagnostic marker and a potential therapeutic target for cardiovascular diseases,and it is of great significance to segment and quantify EAT.This article introduced the evolution of the EAT segmentation and quantification methods from the aspects of traditional imaging,atlas,and artificial intelligence.Furthermore,it reviewed the research progresses on automatically quantified EAT indices in the diagnosis and treatment of cardiovascular diseases.

Objective:To develop a simple and effective subretinal injection pipeline system to enhance the accuracy and precision of subretinal injection volume control.Methods:A retrospective case series study. From May to October 2023, 18 patients (18 eyes) with submacular hemorrhage (SMH) who continuously received modified subretinal injection treatment in Department of Ophthalmology of Peking Union Medical College Hospital were included in the study. Among them, there were 10 males and 8 females. The mean age was (60.00±7.41) years. The primary causes included polypoid choroidal vasculopathy (14 cases), retinal macroaneurysm (2 cases), traumatic retinopathy (1 case), and Valsalva retinopathy (1 case). Hemorrhage affected 14 eyes of the fovea centralis. All affected eyes underwent standard three-channel 25G vitrectomy via the flat part of the ciliary body combined with modified subretinal injection of recombinant tissue plasminogen activator. The improved injection system consisted of a 1 ml syringe, a Q-Syte TM connector, a 41G subretinal microinjection needle, a converter and a viscoelastic substance control pipeline. The drug preparation time for subretinal injection (i.e., the time consumed by the system connection step), the injection time, whether bubbles occur during the injection process, and the perioperative complications were recorded and analyzed. Results:The preparation time prior to drug injection ranged from 230 to 335 seconds, while the injection completion time varied between 43 and 75 seconds. Both times decreased progressively as operator proficiency improved. Among the treated eyes, five received a target injection dose of 0.05 ml and thirteen received 0.10 ml, with all eyes achieving the preset dose accurately. No subretinal bubbles were observed during the injection procedure. Additionally, no intraoperative complications such as retinal hemorrhage or tear secondary to mechanical trauma at the injection site were recorded. Postoperatively, one eye developed anterior chamber hemorrhage, which resolved following intraocular pressure-lowering treatment. No other postoperative complications, including hemorrhage, rhegmatogenous retinal detachment, or infection, were observed in the remaining eyes.Conclusion:The retinal drug injection system developed in this study has a simple structure, safe and stable operation, can achieve precise drug injection, and effectively avoid the formation of bubbles.