Objective To analyze the relationship between implant placement methods and the change of alveolar crest mucosal thickness under different gingival thickness.Methods A total of 98 patients with posterior tooth loss from June 2022 to December 2022 were selected,and a total of 120 implants were implanted.There were 90 samples in the thin gingiva group(gingiva thickness＜3 mm)and 30 samples in the thick gingiva group(gingiva thickness≥3 mm).For the thin gingival cases,three different surgical meth-ods were used for one-stage implantation.Group A(32 teeth)received ridge trimming before implantation.In group B,30 implants were placed under the bone.In group C,28 teeth used tent technique to analyze the vertical soft tissue thickness changes of alveolar crest before and 3～4 months after osseointegration.Results The thin gingival group was treated with three different treatments A,B and C.The gingival thickness increased from Ha(1.96±0.35)mm,Hb(1.89±0.42)mm,Hc(1.96±0.29)mm to H'a(2.88±0.23)mm,H'b(2.93±0.30)mm,H'c(2.65±0.22)mm,respectively.The alveolar crest vertical mucosal thickness of the three groups increased significantly(P＜0.05).The increase in group A and B(about 1 mm)was slightly higher than that in group C(about 0.6 mm),while there was no significant difference between the control group Hd(3.60±0.24)mm and H'd(3.36±0.47)mm(P＞0.05).In addition,the intraoperative gingival thickness measurements(Ha,Hb,Hc,Hd)were basically consistent with the CBCT imaging measurements(HA,HB,HC,HD),and there was no significant difference(P＞0.05).Conclusion Careful analysis of the vertical thickness of the alveolar crest to the mucosa before implant surgery and selection of different implantation methods can increase the vertical thickness of the alveolar crest to the appropriate position,thereby maintaining the stability of the bone around the implant and improving the success rate of the implant.

Objective:To evaluate the effects of silane and universal adhesive alone or in combination on the micro-shear bonding strength(μSBS)between resin cement and resin nanoceramic(Brilliant Crios)and polymer-infiltrated ceramic network(Vita Enam-ic)materials.Methods:The two experimental material blocks were respectively prepared into 42 specimens with a size of 7 mm×6 mm×1 mm,and 50 μm alumina particles were used for sandblasting pretreatment under 0.2 MPa atmospheric pressure.The speci-mens were randomly divided into 6 groups,and the following surface treatment strategies were applied except for control group:si-lane,universal adhesive with silane(single bond universal,SBU);universal adhesive without silane(One Coat 7 Universal,OCU),silane and SBU,silane and OCU.Water contact angle measurements were used to observe the wettability of the 2 materials before and after silane treatment.The bonded specimens were prepared to test μSBS,which were analyzed by Weibull and the failure modes and were observed by stereo microscope.The morphology of the bonding interface was observed by SEM before and after si-lane treatment.Results:After the two materials were treated with silane,the water contact angle decreased(P＜0.05).There was no significant difference of μSBS between the silane and control groups for Brilliant Crios(P＞0.05),while the μSBS improved in the other experimental groups(P＜0.05).Among the groups,silane+OCU group exhibited the highest Weibull modulus and charac-teristic strength.The μSBS of the experimental groups was increased compared with the Vita Enamic control group(P＜0.05),silane+SBU group demonstrated the highest Weibull modulus and characteristic strength.Conclusion:Silane can improve the wetta-bility of the interface,and it alone improves the μSBS of Vita Enamic,but does not improve the μSBS of Brilliant Crios.The com-bined use of silane and universal adhesive enhances the μSBS between resin-ceramic composites and resin cement.

Objective:To evaluate the effects of silane and universal adhesive alone or in combination on the micro-shear bonding strength(μSBS)between resin cement and resin nanoceramic(Brilliant Crios)and polymer-infiltrated ceramic network(Vita Enam-ic)materials.Methods:The two experimental material blocks were respectively prepared into 42 specimens with a size of 7 mm×6 mm×1 mm,and 50 μm alumina particles were used for sandblasting pretreatment under 0.2 MPa atmospheric pressure.The speci-mens were randomly divided into 6 groups,and the following surface treatment strategies were applied except for control group:si-lane,universal adhesive with silane(single bond universal,SBU);universal adhesive without silane(One Coat 7 Universal,OCU),silane and SBU,silane and OCU.Water contact angle measurements were used to observe the wettability of the 2 materials before and after silane treatment.The bonded specimens were prepared to test μSBS,which were analyzed by Weibull and the failure modes and were observed by stereo microscope.The morphology of the bonding interface was observed by SEM before and after si-lane treatment.Results:After the two materials were treated with silane,the water contact angle decreased(P＜0.05).There was no significant difference of μSBS between the silane and control groups for Brilliant Crios(P＞0.05),while the μSBS improved in the other experimental groups(P＜0.05).Among the groups,silane+OCU group exhibited the highest Weibull modulus and charac-teristic strength.The μSBS of the experimental groups was increased compared with the Vita Enamic control group(P＜0.05),silane+SBU group demonstrated the highest Weibull modulus and characteristic strength.Conclusion:Silane can improve the wetta-bility of the interface,and it alone improves the μSBS of Vita Enamic,but does not improve the μSBS of Brilliant Crios.The com-bined use of silane and universal adhesive enhances the μSBS between resin-ceramic composites and resin cement.

Objective To analyze the relationship between implant placement methods and the change of alveolar crest mucosal thickness under different gingival thickness.Methods A total of 98 patients with posterior tooth loss from June 2022 to December 2022 were selected,and a total of 120 implants were implanted.There were 90 samples in the thin gingiva group(gingiva thickness＜3 mm)and 30 samples in the thick gingiva group(gingiva thickness≥3 mm).For the thin gingival cases,three different surgical meth-ods were used for one-stage implantation.Group A(32 teeth)received ridge trimming before implantation.In group B,30 implants were placed under the bone.In group C,28 teeth used tent technique to analyze the vertical soft tissue thickness changes of alveolar crest before and 3～4 months after osseointegration.Results The thin gingival group was treated with three different treatments A,B and C.The gingival thickness increased from Ha(1.96±0.35)mm,Hb(1.89±0.42)mm,Hc(1.96±0.29)mm to H'a(2.88±0.23)mm,H'b(2.93±0.30)mm,H'c(2.65±0.22)mm,respectively.The alveolar crest vertical mucosal thickness of the three groups increased significantly(P＜0.05).The increase in group A and B(about 1 mm)was slightly higher than that in group C(about 0.6 mm),while there was no significant difference between the control group Hd(3.60±0.24)mm and H'd(3.36±0.47)mm(P＞0.05).In addition,the intraoperative gingival thickness measurements(Ha,Hb,Hc,Hd)were basically consistent with the CBCT imaging measurements(HA,HB,HC,HD),and there was no significant difference(P＞0.05).Conclusion Careful analysis of the vertical thickness of the alveolar crest to the mucosa before implant surgery and selection of different implantation methods can increase the vertical thickness of the alveolar crest to the appropriate position,thereby maintaining the stability of the bone around the implant and improving the success rate of the implant.

Objective This study aimed to identify PAX9 variants in non-syndromic tooth agenesis families of Chi-na,as well as to analyze the genotype-phenotype of non-syndromic tooth agenesis caused by PAX9 variants,which can provide a basis for the genetic diagnosis of tooth agenesis.Methods We collected the data of 44 patients with non-syn-dromic oligodontia who underwent treatment at Stomatological Hospital of Hebei Medical University between 2018 and 2023.Whole-exome sequencing was performed on the peripheral blood of the proband and its core family members,and the variants were verified by Sanger sequencing.Pathogenicity analysis and function prediction of the variants were per-formed using bioinformatics tools.The correlation between the genotype of PAX9 variant and its corresponding pheno-type was examined by reviewing 55 publications retrieved from PubMed.The studies involved 232 tooth agenesis pa-tients with PAX9 variants.Results A novel PAX9 c.447delG(p.Pro150Argfs*62)and a reported PAX9 c.406C>T(p.Gln136*)were identified in two Chinese families.Through bioinformatics analysis and three-dimensional structural mod-eling,we postulated that the frameshift variant was pathogenic.The outcome was the premature cessation of PAX9 pro-tein,which caused severe structural and functional deficiencies.Summarizing the PAX9 genotype-phenotype relationship revealed that patients carrying the PAX9 variant commonly led to loss of the second molars.Conclusion We identified the novel PAX9 c.447delG(p.Pro150Argfs*62)in a Chinese family of non-syndromic oligodontia,expanding the known variant spectrum of PAX9.The most susceptible tooth position for PAX9 variants of tooth agenesis was the second mo-lars and the deciduous molars during the deciduous dentition.

Objective:To explore the effect of self-management capability cluster intervention on clinical compliance and treatment outcome in patients with end-stage renal disease undergoing hemodialysis.Methods:A total of 88 patients undergoing hemodialysis in dialysis center from June to December 2019 were randomly divided into intervention group (44 cases) and control group (40 cases) according to odd-even number method. Patients in both groups were treated with hemodialysis and basic treatment, and patients in intervention group were treated with self-management capability cluster intervention. The self-management ability, dialysis compliance and related complications were compared between the two groups before and after intervention. The data were statistically analyzed by SPSS 26.0 software. Independent sample t-test was used for intergroup comparison, and paired t-test was used for intragroup comparison. Results:There was no significant difference in self-management ability at baseline between intervention group and control group ( P>0.05). After 6 months, the total score of self-management ability ((68.61±10.16), (55.12±9.29)) and emotional processing ((13.42±2.89), (11.04±2.46)), executive self-care ((21.67±4.87), (16.71±3.59)), problem solving ((16.61±3.22), (12.03±4.61)), partnership ((14.26±3.64), (10.88±3.29)) were higher than those in the control group, and the differences were statistically significant ( t=7.112, 3.764, 4.739, 5.515, 5.834, all P<0.05). The total score of self-management behavior and the scores of four dimensions in the intervention group were significantly higher than those in the control group ( t=13.413, 5.432, 8.114, 1.910, 4.127, all P<0.05). There were significant differences between the intervention group and the control group in jumping behavior (9.09%, 22.50%) , shortening behavior (11.36%, 30.00%) , hyperkalemia (15.91%, 55.00%), heart failure (11.36%, 37.50%) and arteriovenous fistula occlusion (4.55%, 10.00%) ( χ2=4.095, 5.206, 17.571, 8.843, 5.127, all P<0.05). There were significant differences between the intervention group and the control group in urea clearance index, anemia improvement, blood phosphorus, parathyroid hormone level ( t=3.830, 4.558, -3.720, 6.481, all P<0.05). Conclusion:Self-management capability cluster intervention can improve the clinical compliance and treatment outcome in patients with end-stage renal disease undergoing hemodialysis.

Objective:To assess the influence of different surface treatment on the adhesion of the zirconia-veneering ceramic systems.Methods:28 zirconia specimens were divided into 4 groups(n =7) and treated by non-treatment(group A,the control),sandblaste(group B),hot-etching(group C) and sandblaste + hot-etching(group D).2 specimens randomly selected from each group were examined under SEM and XRD for the observation of surface structure.The veneering porcelain was layered on the remaining specimens of the 4 groups (n =5),then the shear strength of the interface was tested by a universal testing machine.Data were statistically analyzed by SPSS 13.0 software.Results:Different degrees of micro pore structure was observed on the zircomia surface of the 4 groups by SEM observation.The XRD analysis showed that all specimens emerged monoclinic phase.The shear bond strength of group A,B,C and D was (15.96 ± 3.44) MPa,(20.58 ± 2.21) MPa,(26.28 4-2.86) MPa and (22.51 ± 1.94) MPa respectively.group A vs group B,C and D,P ＜ 0.05;group C vs group A,B and D,P ＜ 0.05.Conclusion:The surface treatment of sandblaste,hot-etching and sandblasted + hot-etching can improve the shear bond strength of the zirconia-veneering ceramic systems,and the hotetching method is the most effective.

Objective:To compare the shear bond strength of dentin to composite resin in different post-treatment time period after tooth bleaching with the TREE dental whitening gel and observe the dentin/composite interface of each group. Methods:Eighteen intact premolars were randomly divided into 3 groups(n=6):A:The specimens were immersed into artificial saliva for 3 weeks then adhesion without bleaching; B:Adhesion immediately after bleaching for 3 weeks,during bleaching the specimens were immersed into artificial saliva; C:Before adhesion the specimens immersed in artificial saliva for further 2 weeks after bleaching for 3 weeks. Five specimens from each group were randomly submitted to shear bond strength test. The specimen remained in each group were sectioned to be observed by the scanning electron microscope.Results:(1)The shear bond strength of the group B (10.74?3.03) MPa was significantly lower than that of the group A (18.61?3.56) MPa or the group C (17.21?3.15) MPa (P0.05); (2)The resin tags present in the dentin/composite interface was scarce for the group B,and that were shorter than the group A; The resin tags of the group A and group C were similar in number,but that of the group C was shorter than that of the group A. Conclusion:The use of TREE whitening gel immediately before bonding significantly reduces bond strength,but immersion of bleached teeth in artificial saliva for 2 weeks before bonding results in a return to control bond strength.

Pi.Au-Pt alloy does not resist the growth and adhesion of the bacteria, but Au-Pd does.