ObjectiveTo evaluate the impact of yang-reinforcing and blood-activating therapy on the long-term prognosis for patients with dilated cardiomyopathy （DCM） of yang deficiency and blood stasis syndrome. MethodsA retrospective cohort study was conducted involving 371 DCM patients with yang deficiency and blood stasis syndrome. The yang-reinforcing and blood-activating therapy was defined as the exposure factor. Patients were categorized into exposure group （186 cases） and non-exposure group （185 cases） according to whether they received yang-reinforcing and blood-activating therapy combined with conventional western medicine for 6 months or longer. The follow-up period was set at 48 months， and the Kaplan-Meier survival analysis was used to assess the cumulative incidence of major adverse cardiovascular events （MACE） in both groups. Cox regression analysis was used to explore the impact of yang-reinforcing and blood-activating therapy on the risk of MACE， and subgroup analysis was performed. Changes in traditional Chinese medicine （TCM） syndrome score， left ventricular ejection fraction （LVEF）， left ventricular fractional shortening （LVFS）， left ventricular end-diastolic diameter （LVEDD）， and Minnesota Living with Heart Failure Questionnaire （MLHFQ） score were compared between groups at the time of first combined use of yang-reinforcing and blood-activating therapy （before treatment） and 1 year after receiving the therapy （after treatment）. ResultsMACE occurred in 31 cases （16.67%） in the exposure group and 47 cases （25.41%） in the non-exposure group. The cumulative incidence of MACE in the exposure group was significantly lower than that in the non-exposure group ［HR=0.559， 95%CI（0.361，0.895）， P=0.014］. Cox regression analysis showed that yang-reinforcing and blood-activating therapy was an independent factor for reducing the risk of MACE in DCM patients ［HR=0.623， 95%CI（0.396，0.980）， P=0.041］， and consistent results were observed in different subgroups. Compared with pre-treatment， the exposure group showed decreased TCM syndrome score and MLHFQ score， reduced LVEDD， and increased LVEF and LVFS after treatment （P＜0.05）； in the non-exposure group， TCM syndrome score decreased， LVEF and LVFS increased， and LVEDD reduced after treatment （P＜0.05）. After treatment， the exposure group had higher LVEF and LVFS， smaller LVEDD， and lower TCM syndrome score and MLHFQ score compared with the non-exposure group （P＜0.05）. ConclusionCombining yang-reinforcing and blood-activating therapy with conventional western medicine can reduce the risk of MACE in DCM patients with yang deficiency and blood stasis syndrome， meanwhile improving their clinical symptoms， cardiac function， and quality of life.

Objective: To understand the prevalence of myopia among primary and secondary school students in minority areas of Yunnan Province, and to explore the influence of outdoor activities and short-distance use of eyes, so as to provide a basis for early myopia intervention. Methods: In October 2020, the survey was conducted among 1 782 primary and secondary school students in three cities of Yunnan through a multi stage random cluster sampling method. All subjects underwent a questionnaire survey and the visual acuity examination at baseline. The first follow-up was conducted in October 2021 to obtain 1 691 valid samples, and the second follow-up was conducted in May 2023 to obtain 1 367 valid samples. Factors associated with myopia among primary and secondary school students were explored by using generalized estimating equations. Results: The prevalence rates of myopia in 2020, 2021 and 2023 were 52.64%, 61.62% and 69.35%, respectively, showing an increasing trend ( χ 2 trend =91.77, P <0.05). The results of multivariate regression analysis on the generalized estimation equations showed that age at baseline ( OR =1.31), girls ( OR =1.76), Hani ethnicity ( OR =0.75), Bai ethnicity ( OR =0.69), parental myopia ( OR =1.97-2.29), parents often reducing children s exercise time for homework or tutoring ( OR =1.35), less than 1 time or 2-3 times of ball sports per week ( OR =1.27, 1.20 ), reading and writing in the classroom during the break ( OR =1.27), reading in direct sunlight occasionally ( OR =1.20), using only desk lamp for writing at home ( OR =0.71), more than 1 hours of short-distance eye use for a break once ( OR =1.23) were associated with myopia among primary and secondary school students ( P <0.05). Conclusions Outdoor activities and short-distance use of eye among primary and middle school students in minority areas in Yunnan province are suboptimal. Enhancing the related environmental and behavioral factors can effectively mitigate the occurrence and progression of myopia.

Staphylococcus aureus is a Gram-positive bacterium with strong pathogenicity. With the widespread use of antibiotics， its multi-drug resistance has gradually increased. Among them， methicillin-resistant S. aureus （MRSA） is one of the main pathogens of hospital and community infections. Antimicrobial peptides are short-chain peptides with good antibacterial effects and low drug resistance， which have been widely studied in recent years. This study summarizes the mechanism of action of antimicrobial peptides and related study on antimicrobial peptides against MRSA from different sources. It is found that the mechanisms of action of antimicrobial peptides include targeting bacterial cell membranes， bacterial cells， and bacterial cell walls， etc. Besides isolating antimicrobial peptides with anti-MRSA activity from animals， plants， and microorganisms， antimicrobial peptides can also be obtained through synthetic methods. Among them， GHa-derived peptides from animal sources， Ib-AMP4 from plant sources， Ph-SA from microbial sources， the synthetic peptide LLKLLLKLL-NH2， and so on， due to their effective antibacterial activity， rapid bactericidal speed， and low toxicity， are promising candidates for anti-MRSA drugs.

BACKGROUND:According to existing clinical studies,vertebroplasty treatment with both the external pedicle approach and the pedicle approach can improve the pain and quality of life of patients with spinal compression fractures.Compared with the pedicle approach,the external pedicle approach has a freer puncture angle,and good bone cement dispersion effect can be obtained by adjusting the puncture angle. OBJECTIVE:To compare the impact of vertebroplasty through individualized unilateral external pedicle approach and bilateral pedicle approach on the treatment of spinal compression fractures by quantifying the dispersion effect of bone cement. METHODS:A total of 80 patients with thoracolumbar compression fracture were divided into two groups by random number table method.The bilateral pedicle group(n=40)underwent vertebroplasty through a bilateral pedicle approach,while the unilateral external pedicle group(n=40)underwent individualized vertebroplasty through a unilateral external pedicle approach.Anteroposterior and lateral X-rays of the affected vertebrae from two groups of patients were photographed to assess effect and type of bone cement dispersion within 3 days after surgery.Visual analog scale score,tenderness threshold around fracture,and Oswestry dysfunction index were assessed before,1,7 days,and 1 month after surgery. RESULTS AND CONCLUSION:(1)Dispersion effect of bone cement in unilateral external pedicle group was better than that in bilateral pedicle group(P<0.001),and the amount of bone cement perfusion was higher than that in bilateral pedicle group(P<0.001).In the bilateral pedicle group,the bone cement dispersion types were mainly concentrated in type Ⅰ and type Ⅲ,while in the unilateral external pedicle group,the bone cement dispersion types were mainly concentrated in type I and type Ⅱ,and there was a significant difference in bone cement dispersion types between the two groups(P<0.001).(2)Postoperative visual analog scale scores and Oswestry disability index of both groups were lower than those before surgery(P<0.001),and postoperative tenderness threshold around fracture showed a trend of decreasing first and then increasing.At the same time point after treatment,there were no significant differences in visual analog scale score,Oswestry disability index,and tenderness threshold around fracture between the two groups(P>0.05).(3)The results indicate that individualized vertebroplasty via unilateral external pedicle approach can achieve better bone cement dispersion,and the treatment effect is consistent with the vertebroplasty via classical bilateral pedicle approach.

BACKGROUND:In recent years,numerous studies have shown that autophagy and mitophagy play an important role in the regulation of bone metabolism.Under non-physiological conditions,mitophagy breaks the balance of bone metabolism and triggers metabolism disorders,which affect osteoblasts,osteoclasts,osteocytes,chondrocytes,bone marrow mesenchymal stem cells,etc. OBJECTIVE:To summarize the mechanism of mitophagy in regulating bone metabolic diseases and its application in clinical treatment. METHODS:PubMed,Web of Science,CNKI,WanFang and VIP databases were searched by computer using the keywords of"mitophagy,bone metabolism,osteoblasts,osteoclasts,osteocytes,chondrocytes,bone marrow mesenchymal stem cells"in English and Chinese.The search time was from 2008 to 2023.According to the inclusion criteria,90 articles were finally included for review and analysis. RESULTS AND CONCLUSION:Mitophagy promotes the generation of osteoblasts through SIRT1,PINK1/Parkin,FOXO3 and PI3K signaling pathways,while inhibiting osteoclast function through PINK1/Parkin and SIRT1 signaling pathways.Mitophagy leads to bone loss by increasing calcium phosphate particles and tissue protein kinase K in bone tissue.Mitophagy improves the function of chondrocytes through PINK1/Parkin,PI3K/AKT/mTOR and AMPK signaling pathways.Modulation of mitophagy shows great potential in the treatment of bone diseases,but there are still some issues to be further explored,such as different stages of drug-activated mitophagy,and the regulatory mechanisms of different signaling pathways.

BACKGROUND:At present,research has only shown that the cervical lordosis ratio can be an important factor in predicting the loss of lordosis curvature after laminoplasty,and no one has studied whether the cervical lordosis ratio,a dynamic level indicator,can be one of the decision-making factors for the selection of posterior cervical surgical procedures. OBJECTIVE:To investigate whether the cervical lordosis ratio,an index of cervical hyperextension and hyperflexion,can be used as a selective index for laminoplasty and laminectomy fusion. METHODS:A retrospective review of 141 patients who had undergone posterior cervical surgery more than one year of follow-up due to multi-level cervical spondylotic myelopathy from December 2015 to March 2020 was performed.Among them,63 patients received laminectomy and fusion(laminectomy and fusion group)and 78 patients received laminoplasty(laminoplasty group).The demographic statistics(gender,age,body mass index,follow-up time),imaging indexes such as C2-7 Cobb angle,C2-7 range of motion,flexion Cobb angle,extension Cobb angle,flexion range of motion and extension range of motion,clinical effect indexes such as Japanese Orthopaedic Association score and visual analog scale score were compared between the two groups.The evaluation index of cervical lordosis alignment change was C2-7 Cobb angle difference before and after operation(ΔCL).Cervical lordosis ratio was equal to 100%×flexion range of motion/C2-7 range of motion.Receiver operating characteristic curve analysis was used to determine the role of cervical lordosis ratio in predicting postoperative severe cervical lordosis loss(ΔCL≤-10°).According to the critical value of cervical lordosis ratio(68.5%),all patients were divided into low cervical lordosis ratio group and high cervical lordosis ratio group.In these two ratio groups,the cervical lordosis alignment index and clinical effect index between the two operation groups were discussed again. RESULTS AND CONCLUSION:(1)Cervical lordosis alignment decreased after laminectomy and fusion and laminoplasty(P=0.039,P=0.002),and cervical lordosis alignment change in laminoplasty group(ΔCL)was greater than that of laminectomy and fusion group,and the difference between the two groups was statistically significant.(2)Based on receiver operating characteristic curve analysis,cervical lordosis ratio in predicting severe cervical lordosis alignment change(ΔCL≤-10°)had good identification ability(area under the curve=0.792).(3)In low cervical lordosis ratio group,there was no significant difference in cervical lordosis alignment change(ΔCL)between laminectomy and fusion group and laminoplasty group(P=0.141).(4)In high cervical lordosis ratio group,the ΔCL of laminoplasty group was greater than that in laminectomy and fusion group(P=0.001),which had a higher probability of postoperative severe cervical lordosis alignment change(ΔCL≤-10°)(43%,29%).(5)It is indicated that cervical lordosis ratio can be used as a decision-making index for the choice of posterior surgery for multi-level cervical spondylotic myelopathy.Laminoplasty can be considered in the low cervical lordosis ratio group,while laminectomy and fusion can be considered in the high cervical lordosis ratio group.

BACKGROUND:Titanium implants are widely used in clinical practice because of their high strength and good biocompatibility.However,during implantation,bacterial infection and tissue damage environment produce a large number of reactive oxygen species,which can easily lead to delayed tissue healing and surgical failure.Consequently,the development of titanium implants with antimicrobial and antioxidant properties becomes paramount. OBJECTIVE:Considering the potent antimicrobial attributes of copper ions and the remarkable antioxidant qualities of polyphenols,we proposed the fabrication of polyphenol-mediated copper ion coatings on titanium surfaces.These coatings were subsequently assessed for their in vitro antimicrobial and antioxidant properties. METHODS:Nanostructures were generated on the titanium surface using the alkali thermal method.The titanium was immersed in a solution containing tannic acid and copper ions to achieve polyphenol-mediated copper ion coatings.The surface morphology and water contact angle were detected.The loading and release of copper ions were examined using atomic absorption spectroscopy.Staphylococcus aureus was inoculated on the surface of pure titanium sheet(blank group),alkali heat treated titanium sheet(control group),and polyphenol mediated copper ion modified titanium sheet(experimental group)to observe the bacterial survival status.Osteoblast precursor cells MC3T3-E1 were co-cultivated on the surface of three groups of titanium sheets to assess their antioxidant properties and bioactivity. RESULTS AND CONCLUSION:(1)Scanning electron microscopy showed that the polyphenol-mediated copper ion modified titanium sheet had rod-like nanostructures and no cracks on the surface.The surface hydrophilicity of copper ion modified titanium sheet mediated by polyphenol was close to that of pure titanium sheet.Atomic absorption spectrometry results showed a 51%increase in the loading capacity of copper ions after polyphenol mediation,with a uniform release of copper ions.(2)The antibacterial rates of titanium sheets in the blank group,control group,and experimental group were 0%,21.65%,and 93.75%,respectively.The live/dead staining and CTC staining showed that the live bacteria on the surface of titanium plates in the blank group were the most,and the live bacteria on the surface of titanium plates in the experimental group were the least.(3)The results of live/dead staining and CCK-8 assay showed that the three groups of titanium sheets had good cytocompatibility,and the titanium sheets in the experimental group were more conducive to the proliferation of MC3T3-E1 cells.Active oxygen fluorescence probe detection exhibited that compared with the other two groups,the fluorescence intensity of active oxygen on the surface of the experimental group was significantly reduced.The results of alkaline phosphatase and alizarin red S staining showed that the osteogenic differentiation and extracellular matrix mineralization of MC3T3-E1 cells on the surface of titanium sheets in the experimental group were stronger than those in the other two groups.(4)These results show that the polyphenol-mediated copper ion coating has strong antibacterial and antioxidant properties and promotes osteogenic differentiation.

BACKGROUND:The authors found that when the bilateral percutaneous vertebral augmentation is used to treat osteoporotic vertebral compression fractures with a total bone cement injection of 4 mL or more,different distribution patterns were usually presented on the X-rays;however,there were few reports addressing the effects of these patterns of bone cement distribution on the biomechanical properties of fractural vertebrae. OBJECTIVE:To further explore the biomechanical effects of different bone cement filling doses and distribution patterns on biomechanics of the fractural vertebrae using the finite element method. METHODS:The L1-L3 finite element models of osteoporosis were established,and the vertebral compression fractures were simulated in L2.Four distribution patterns bilateral partial fusion(FH type),full fusion(FO type),symmetrical separation(SA type),and asymmetric segregation(SN type)were simulated in 4 and 6 mL injections in the osteoporotic vertebral compression fracture models,respectively,and a total of nine sets of models were obtained.These models were solved under the same boundary conditions and compared with the stress and displacement of the L2 fractural vertebra. RESULTS AND CONCLUSION:(1)The maximum stresses of the nine groups of models were concentrated in the L2 fractural area,and the maximum stress and maximum displacement of each filling model were lower than in the osteoporotic vertebral compression fracture model,indicating the effectiveness of bone cement filling in the treatment of osteoporotic vertebral compression fracture.(2)Compared with 4 mL bone cement filling,6 mL bone cement filling could significantly reduce the stress of fractured vertebrae and enhance the strength of fractured vertebrae while improving the stability of fractured vertebrae.(3)In the same state of movement,the FH type stress was the least,followed by the SA type,both of which were close.FO type stress was the largest,especially in the lateral bend,which might be associated with its cluster shape resulting in the concentration of lateral stress.In the aspect of displacement,FH type was the least and FO type was the largest.(4)The results show that increased dose of bone cement injection reduces fractural vertebral stress and improves stability,but increases the risk of leakage.Bilateral symmetrical dispersed bone cement(FH type,SA type)is superior in restoring vertebral strength and stability than full fusion(FO type),asymmetric separated(SN type)bone cement.Therefore,when clinically performing bilateral percutaneous vertebral augmentation treatment of osteoporotic vertebral compression fractures,the bilateral symmetric dispersions of the distribution are first guaranteed;priority is recommended for FH type distribution,for appropriate stress stimulation and best stability.

BACKGROUND:Micro-robots have the characteristics of small size,flexibility,and strong targeting,and can complete complex tasks in a single or clustered manner in a narrow environment.With the continuous optimization of materials,preparation processes,and driving approaches,they have shown increasingly important application value in the field of biomedicine. OBJECTIVE:To analyze the application of field-driven micro-robots in medical field and to look forward to their application prospect. METHODS:Using"microrobots,nanorobots,drivers,biomedical,medical"as Chinese keywords and"microrobots,micro-robots,nanorobots,micromachine,microswimmer,medical"as English keywords,WanFang Data and PubMed databases were searched,respectively.The search time range was from January 2010 to January 2024,and a small number of long-term articles were included.Through reading the titles and preliminarily screening the abstracts,the repetitive studies,low-quality journals,and irrelevant literature were excluded.After reading the entire text,66 papers were finally included for review. RESULTS AND CONCLUSION:Field-driven medical micro-robots mainly include magnetic,optical,thermal,ultrasonic,and multi-mixed factor-driven robots.Field-driven robots have been used in intestinal diagnosis,drug targeting therapy,and stem cell therapy.Medical micro-robots are currently only used in a small number of clinical applications,but most of which are still in the theoretical and experimental stages.Medical micro-robots will face many challenges in future,such as large-scale preparation,precise control of micro-robots,recycling or degradation in vivo,whether the materials used will cause adverse reactions to the human body,and the related minimally invasive medical procedures.

BACKGROUND:Traditional treatments for corneal alkali burns are limited,especially in controlling inflammation,preventing neovascularization,and inhibiting corneal scarring.Natural,synthetic,or composite materials provide a wide range of treatment options.However,the mechanism by which biomaterials promote corneal alkali burn repair has not yet been systematically understood. OBJECTIVE:To summarize the current research on biomaterials in promoting corneal alkali burn repair in and outside China,and review the mechanism and application of biomaterials in repairing corneal alkali burn. METHODS:The first author searched"cornea,alkali burn,amniotic membrane,hyaluronic acid,collagen,chitosan,polymer materials"as Chinese keywords and"amniotic membrane,hyaluronic acid,collagen,chitosan,polymer,cornea,alkali burn"as English keywords in PubMed,Web of Science,CNKI,and WanFang databases.According to inclusion and exclusion criteria,76 eligible articles were finally included for review. RESULTS AND CONCLUSION:(1)In the field of corneal alkali burn repair,biomaterials such as amniotic membrane,hyaluronic acid,collagen,chitosan,and degradable polymer materials have been widely studied and applied.Each of these biomaterials has its own characteristics,advantages,and disadvantages,and stands out in different aspects.(2)First and foremost,amniotic membranes are considered one of the most promising biomaterials due to their abundance of bioactive factors.They are biocompatible and can regulate the corneal inflammatory response.However,there are issues with donor shortages and susceptibility to infectious diseases.(3)Hyaluronic acid has good moisturizing properties and biocompatibility,and is able to improve the survival rate of corneal cells and increase corneal transparency.(4)The good biocompatibility and scaffold structure of collagen enable the promotion of corneal cell adhesion and proliferation,as well as the reconstruction of corneal tissue structure.(5)Chitosan is recognized for its good biocompatibility and degradability,making it suitable as a carrier for drug delivery and cell transplantation.(6)Degradable polymer materials have good controllability over degradation and can provide a good support and delivery platform for the repair of corneal alkali burns,but further research is needed on their stability and biocompatibility.(7)Overall,there is currently no single biomaterial that can completely address the repair problem of corneal alkali burns,and each biomaterial has its own specific application scenarios and limitations.(8)Future research directions should focus on further improving the properties and structure of biomaterials,exploring more effective combination applications,and deeply understanding the interaction mechanism between biomaterials and corneal tissue,in order to enhance the therapeutic effect of corneal alkali burns and the quality of life of patients.