OBJECTIVE To establish a Chinese drug-related problem （DRP） classification system applicable to pharmacist-led pharmaceutical care in China， providing pharmacists with an effective and practical tool for pharmaceutical care. METHODS A multi-stage process was employed to construct the DRP classification system， including literature review and analysis， comparison of existing classification systems， refinement of classification items and framework development， two rounds of standard case validation， expert discussion， and system revision. The Fleiss′ kappa test was used to calculate the consistency coefficient κ， assessing the reliability of pharmacists participating in evaluating the classification system. An electronic questionnaire comprising six items was employed to evaluate the system’s applicability. RESULTS The constructed Chinese DRP classification system comprised six sections [problem（including potential problems）， DRP evaluation， cause （including possible causes of potential problems）， intervention， acceptance of intervention and DRP status]， with 24 primary codes and 96 secondary codes. In the first round of case validation， κ values exceeded 0.4 for all sections except “intervention” and “DRP status”. In the second round， κ values exceeded 0.4 for all sections. In the applicability evaluation of the classification system， positive ratings （“strongly agree” or “agree”） exceeded 85% for all items. Specifically， positive ratings for“the classification system can provide appropriate category selection”，“ the classification system is comprehensive”，“ the classification system is convenient to use” and “the classification system is highly satisfactory” exceeded 92%. CONCLUSIONS The Chinese DRP classification system developed demonstrates both high reliability and applicability， providing an effective and practical classification tool for pharmacists in China to conduct pharmaceutical care.

Objective To construct a nomogram for predicting the overall survival rate of patients with gallbladder cancer with positive regional lymph nodes (LNs). Methods Data of 1413 patients diagnosed with gallbladder cancer with regional LN metastases from 2000 to 2022 were extracted from the Surveillance, Epidemiology, and End Results (SEER) database of the National Cancer Institute in the United States. The patients were randomly divided into a training set and a validation set at a ratio of 7:3. The Cox proportional hazards regression model was used to explore the independent risk factors affecting the survival of patients and construct a nomogram. The receiver operating characteristic (ROC) curve, calibration curve, and clinical decision curve were drawn to evaluate the predictive ability of the model. Results Multivariate Cox analysis showed that age, T stage, M stage, grade, surgery, radiotherapy, and chemotherapy were independent risk factors affecting the overall survival rate of patients with gallbladder cancer with positive regional LNs (P<0.05). These factors were all included in the nomogram to construct the prediction model. The areas under the ROC curves for 6 months, 1 year, and 3 years in the training set were respectively 0.849, 0.825 and 0.821; those in the validation set were respectively 0.826, 0.828 and 0.795. The calibration curves showed good calibration in both the training set and the validation set. The clinical decision curve showed high clinical application value. Conclusion The constructed nomogram model has good predictive ability and can help clinicians predict the overall survival of patients with gallbladder cancer with positive regional LNs, facilitating individualized treatment.

Background Manganese is an essential trace element for the human body and maintains normal development of many organs including the brain. However, long-term exposure to a high manganese environment or excessive manganese intake will lead to manganese poisoning and result in neurological diseases, and currently no effective treatment plan is available. Objective To develop an animal model for subchronic manganese exposure and assess the impact of Dendrobium nobile Lindl. alkaloids (DNLA) on manganese associated behavioral and hippocampal effects in rats. Methods Fifty male SPF SD rats were randomly allocated into a control group (0.9% normal saline by intraperitoneal injection), two experimental groups [7.5 mg·kg⁻¹ (low) or 15 mg·kg⁻¹ (high) of MnCl₂·4H₂O by intraperitoneal injection], and two DNLA antagonistic groups [15 mg·kg⁻¹ MnCl₂·4H₂O by intraperitoneal injection then either 20 mg·kg⁻¹ (low) or 40 mg·kg⁻¹ (high) DNLA by oral administration]. All groups of rats were adminaistered 5 d per wek, once a day, for consecutive 13 weeks. Following modeling, neurobehavioral assessments were conducted using open field, Morris water maze, and Y maze. Inductively coupled plasma mass spectrometry (ICP-MS) was utilized to measure manganese levels in the blood and brain tissues of the rats, and hematoxylin-eosin (HE) staining was employed to examine neuronal morphological changes in the hippocampal tissues of the rats. Results The neurobehavioral tests revealed that the manganese-exposed rats exhibited decreased total movement distance, prolonged central zone dwelling time, and reduced motor activity in the open field test, indicating tendencies toward depression and anxiety (P<0.05). In the Y-maze test, the mean exploration distance in the novel arm, the number of entries into the novel arm, and the time spent in the novel arm of the managanses-exposed rats were all reduced, while the latency period increased, suggesting impaired spatial exploration and learning-memory functions (P<0.05). In the Morris water maze navigation test, the escape latency was significantly longer in the manganese-exposed rats compared to the control group, and the number of platform crossings decreased in the spatial probe test, indicating a significant decline in spatial learning and memory (P<0.05). The ICP-MS analysis showed elevated manganese concentrations in the blood and hippocampus of the exposed rats (P<0.05), and the histopathological observation revealed hippocampal damage. Following the DNLA intervention, the manganese-exposed rats showed increased total movement distance and reduced central zone dwelling time in the open field test (P<0.05). In the Y-maze test, the mean exploration distance in the novel arm, the number of entries into the novel arm, and the time spent in the novel arm increased, while the latency period decreased, suggesting alleviation of anxiety and improved exploratory behavior (P<0.05). In the Morris water maze test, the escape latency gradually shortened, and both the number of platform crossings and the percentage of time spent in the target quadrant increased, indicating improved spatial learning and memory (P<0.05). Additionally, the manganese levels in the blood and hippocampus decreased (P<0.05), and the hippocampal pathological changes were partially restored. Conclusion DNLA demonstrates the ability to counteract multiple neurotoxic effects following the elevation of manganese levels in the blood and hippocampal tissues of rats induced by subchronic manganese exposure. Specifically, DNLA is shown to ameliorate the behavioral alterations observed in rats after manganese exposure, and mitigate the hippocampal damage in manganese-exposed rats.

ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.

ObjectiveBased on the concept of quality by design（QbD）， the processing process of calcined Pyritum was optimized， and its X-ray diffraction（XRD） fingerprint was established. MethodsThe safety， effectiveness and quality controllability of calcined Pyritum were taken as the quality profile（QTPP）， the color， hardness， metallic luster， phase composition， the contents of heavy metals and hazardous elements were taken as the critical quality attributes（CQAs）， and the calcination temperature， calcination time， paving thickness and particle size were determined as the critical process parameters（CPPs）. Differential thermal analysis， X-ray diffraction（XRD） and inductively coupled plasma mass spectrometry（ICP-MS） were used to analyze the correlation between the calcination temperature and CQAs of calcined Pyritum. Then， based on the criteria importance through intercriteria correlation（CRITIC）-entropy weight method， the optimal processing process of calcined Pyritum was optimized by orthogonal test. Powder XRD was used to analyze the phase of calcined Pyritum samples processed according to the best process， and the mean and median maps of calcined Pyritum were established by the superposition of geometric topological figures， and similarity evaluation and cluster analysis were carried out. ResultsThe results of single factor experiments showed that the physical phase of Pyritum changed from FeS₂ to Fe₇S₈ during the process of temperature increase， the color gradually deepened from dark yellow， and the contents of heavy metals and harmful elements decreased. The optimized processing process of calcined Pyritum was as follows：calcination temperature at 750 ℃， calcination time of 2.5 h， paving thickness of 3 cm， particle size of 0.8-1.2 cm， vinegar quenching 1 time［Pyritum-vinegar（10∶3）］. After calcination， the internal structure of Pyritum was honeycomb-shaped， which was conducive to the dissolution of active ingredients. XRD fingerprints of 13 batches of calcined Pyritum characterized by 10 common peaks were established. The similarities of the relative peak intensities of the XRD fingerprints of the analyzed samples were>0.96， and it could effectively distinguish the raw products and unqualified products. ConclusionTemperature is the main factor affecting the quality of calcined Pyritum. After processing， the dissolution of the effective components in Pyritum increases， and the contents of heavy metals and harmful substances decrease， reflecting the function of processing to increase efficiency and reduce toxicity. The optimized processing process is stable and feasible， and the established XRD fingerprint can be used as one of the quality control standards of calcined Pyritum.

ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.

ObjectiveBased on the concept of quality by design（QbD）， the processing process of calcined Pyritum was optimized， and its X-ray diffraction（XRD） fingerprint was established. MethodsThe safety， effectiveness and quality controllability of calcined Pyritum were taken as the quality profile（QTPP）， the color， hardness， metallic luster， phase composition， the contents of heavy metals and hazardous elements were taken as the critical quality attributes（CQAs）， and the calcination temperature， calcination time， paving thickness and particle size were determined as the critical process parameters（CPPs）. Differential thermal analysis， X-ray diffraction（XRD） and inductively coupled plasma mass spectrometry（ICP-MS） were used to analyze the correlation between the calcination temperature and CQAs of calcined Pyritum. Then， based on the criteria importance through intercriteria correlation（CRITIC）-entropy weight method， the optimal processing process of calcined Pyritum was optimized by orthogonal test. Powder XRD was used to analyze the phase of calcined Pyritum samples processed according to the best process， and the mean and median maps of calcined Pyritum were established by the superposition of geometric topological figures， and similarity evaluation and cluster analysis were carried out. ResultsThe results of single factor experiments showed that the physical phase of Pyritum changed from FeS₂ to Fe₇S₈ during the process of temperature increase， the color gradually deepened from dark yellow， and the contents of heavy metals and harmful elements decreased. The optimized processing process of calcined Pyritum was as follows：calcination temperature at 750 ℃， calcination time of 2.5 h， paving thickness of 3 cm， particle size of 0.8-1.2 cm， vinegar quenching 1 time［Pyritum-vinegar（10∶3）］. After calcination， the internal structure of Pyritum was honeycomb-shaped， which was conducive to the dissolution of active ingredients. XRD fingerprints of 13 batches of calcined Pyritum characterized by 10 common peaks were established. The similarities of the relative peak intensities of the XRD fingerprints of the analyzed samples were>0.96， and it could effectively distinguish the raw products and unqualified products. ConclusionTemperature is the main factor affecting the quality of calcined Pyritum. After processing， the dissolution of the effective components in Pyritum increases， and the contents of heavy metals and harmful substances decrease， reflecting the function of processing to increase efficiency and reduce toxicity. The optimized processing process is stable and feasible， and the established XRD fingerprint can be used as one of the quality control standards of calcined Pyritum.

This paper systematically summarizes the practical experience of the 2025 Dingri earthquake emergency medical rescue in Tibet. It analyzes the requirements for earthquake medical rescue under conditions of high-altitude hypoxia, low temperature, and low air pressure. The paper provides a detailed discussion on the strategic layout of earthquake medical rescue at the national level, local government level, and through social participation. It covers the construction of rescue organizational systems, technical systems, material support systems, and information systems. The importance of building rescue teams is emphasized. In high-altitude and cold conditions, rapid response, scientific decision-making, and multi-party collaboration are identified as key elements to enhance rescue efficiency. By optimizing rescue organizational structures, strengthening the development of new equipment, and promoting telemedicine technologies, the precision and effectiveness of medical rescue can be significantly improved, providing important references for future similar disaster rescues.

BACKGROUND: Primary pulmonary mucoepidermoid carcinoma (PMEC) is an exceedingly rare malignancy originating from bronchial submucosal glands, accounting for <0.2% of lung cancers. Histologically characterized by a triphasic composition of mucinous, epidermoid, and intermediate cells, PMEC is classified into low-grade (favorable prognosis) and high-grade (aggressive behavior) subtypes. This study aimed to investigate the clinicopathological characteristics and prognostic indicators of PMEC. METHODS: Clinicopathological, radiological, molecular, and survival data from 26 PMEC patients were retrospectively analyzed, including immunohistochemical profiles and MAML2 rearrangement status, supplemented by literature review. RESULTS: The cohort comprised 14 males and 12 females (mean age: 55.6 years). Eight patients (30.8%) were smokers, and 19 (73.1%) presented with symptoms. Central tumors predominated (n=19, 73.1%) versus peripheral lesions (n=7, 26.9%). Computed tomography (CT) imaging consistently revealed hypo-to-isodense masses/nodules. Pathologically, 19 cases were low-grade and 7 high-grade. Immunohistochemically, the tumor cells were positive for CK7, P40, P63 and CK5/6, and the Ki-67 index ranged from 2% to 70%. MAML2 rearrangement was detected in 52.4% (11/21) of tested cases. Clinical staging distribution: stage I (n=14), stage II (n=8), stage III (n=3), stage IV (n=1). Treatment modalities: radical surgery alone (n=13), surgery with adjuvant chemotherapy (n=11), chemoradiotherapy (n=1), and conservative management (n=1). With a median follow-up of 57 months, 6 patients (23.1%) died. Prognostic analysis demonstrated: (1) Significantly inferior survival in high-grade versus low-grade groups (P<0.05); (2) Lymph node metastasis, advanced stage, Ki-67>20%, and high-grade histology significantly correlated with reduced overall survival (P<0.05); (3) Lymph node metastasis constituted an independent poor prognostic factor (HR=12.73, 95%CI: 1.22-132.96). CONCLUSIONS PMEC exhibits distinct clinicopathological features, with MAML2 rearrangement present in approximately half of cases. Lymph node metastasis, advanced stage, high Ki-67 proliferation index, and high-grade histology are key determinants of poor prognosis, with lymph node metastasis serving as an independent risk factor.
Humans ; Male ; Female ; Middle Aged ; Carcinoma, Mucoepidermoid/mortality* ; Lung Neoplasms/mortality* ; Trans-Activators/genetics* ; Prognosis ; Adult ; Gene Rearrangement ; Aged ; Retrospective Studies ; Transcription Factors/genetics* ; DNA-Binding Proteins/genetics*

Tumor metastasis is the leading cause of high mortality in most cancers, and numerous studies have demonstrated that the malignant crosstalk of multiple components in the tumor microenvironment (TME) together promotes tumor metastasis. Cancer-associated fibroblasts (CAFs) are the major stromal cells and crosstalk centers in the TME of various kinds of tumors, such as breast cancer, pancreatic cancer, and prostate cancer. Recently, the CAF-induced pro-tumor metastatic TME has gained wide attention, being considered as one of the effective targets for tumor therapy. With in-depth research, CAFs have been found to promote tumor metastasis through multiple mechanisms, such as inducing epithelial-mesenchymal transition in tumor cells, remodeling the extracellular matrix, protecting circulating tumor cells, and facilitating the formation of a pre-metastatic niche. To enhance the anti-tumor metastasis effect, therapeutic strategies designed by combining nano-drug delivery systems with CAF modulation are undoubtedly a desirable choice, as evidenced by the research over the past decades. Herein, we introduce the physiological properties of CAFs, detail the possible mechanisms whereby CAFs promote tumor metastasis, categorize CAFs-based nano-drug delivery strategies according to their anti-metastasis functions and discuss the current challenges, possible solutions, as well as the future directions in order to provide a theoretical basis and reference for the utilization of CAFs-based nano-drug delivery strategies to promote tumor metastasis therapy.