Peri-implant keratinized mucosa (PIKM) augmentation refers to surgical procedures aimed at increasing the width of PIKM. Consensus reports emphasize the necessity of maintaining a minimum width of PIKM to ensure long-term peri-implant health. Currently, several surgical techniques have been validated for their effectiveness in increasing PIKM. However, the selection and application of PIKM augmentation methods may present challenges for dental practitioners due to heterogeneity in surgical techniques, variations in clinical scenarios, and anatomical differences. Therefore, clear guidelines and considerations for PIKM augmentation are needed. This expert consensus focuses on the commonly employed surgical techniques for PIKM augmentation and the factors influencing their selection at second-stage surgery. It aims to establish a standardized framework for assessing, planning, and executing PIKM augmentation procedures, with the goal of offering evidence-based guidance to enhance the predictability and success of PIKM augmentation.
Humans ; Consensus ; Dental Implants ; Mouth Mucosa/surgery* ; Keratins

Paclitaxel (PTX), a valuable natural product derived from Taxus species, exhibits remarkable anti-cancer properties. It penetrates nanopores in microtubule walls, interacting with tubulin on the lumen surface and disrupting microtubule dynamics, thereby inducing cytotoxic effects in cancer cells. PTX and its derivatives have gained approval for treating various diseases due to their low toxicity, high efficiency, and broad-spectrum application. The widespread success and expanding applications of PTX have led to increased demand, raising concerns about accessibility. Consequently, researchers globally have focused on developing alternative production methods and applying nanocarriers in PTX delivery systems to enhance bioavailability. This review examines the challenges and advancements in PTX sourcing, production, physicochemical properties, anti-cancer mechanisms, clinical applications, trials, and chemo-immunotherapy. It aims to provide a comprehensive reference for the rational development and effective utilization of PTX.
Humans ; Paclitaxel/pharmacology* ; Antineoplastic Agents, Phytogenic/pharmacology* ; Neoplasms/drug therapy* ; Animals ; Taxus/chemistry*

Background Occupational stress has emerged as a critical public health concern affecting the physical and mental well-being of workers in the manufacturing sector. However, researchers typically evaluate its core driver—cumulative fatigue—using a crude binary “present/absent” variable, thereby overlooking the high-dimensional complexity and heterogeneity inherent in fatigue characteristics. This oversimplification constrains both the precision and predictive performance of occupational stress risk assessment model. Objective Leveraging a data-driven approach, to survey data on cumulative fatigue among manufacturing employees, and then use this new classification to develop and validate an occupational stress prediction model, with an ultimate aim of enhancing the accuracy and effectiveness of occupational stress assessment. Methods A set of cross-sectional survey data on 3871 manufacturing employees in 2021 were derived from the “Long working hours exposure and its adverse health effect risk assessment” program of the National Institute for Occupational Health and Poison Control, Chinese Center for Disease Control and Prevention. Occupational stress was assessed using the Core Occupational Stress Measurement Scale, while cumulative fatigue was evaluated via the Worker’s Self-Diagnostic Questionnaire for Fatigue Accumulation. Boruta method was applied to screen core variables from 20 occupational stress influencing factors. Dimensionality reduction of cumulative fatigue features was performed using a Bayesian sparse autoencoder (BASE), followed by comparison and application of clustering methods to achieve multi-class classification of the reduced features. Six machine learning classification models were then selected including logistic regression, support vector machine, decision tree, random forest, adaptive boosting, and lightweight gradient boosting machine (LightGBM) to construct and compare two occupational stress prediction models involving cumulative fatigue combined with ten other core variables: one utilizing the original binary cumulative fatigue label as a core variable, and another employing the novel fatigue classification proposed herein as a core variable. Results The positive rate of occupational stress among the manufacturing employees was 38.9%. The Boruta method identified 11 core variables of occupational stress: depressive symptoms, cumulative fatigue, age, length of service, tenure in current position, average weekly working hours, average daily overtime hours, average monthly income, low levels of exercise, life satisfaction, and sleep quality. The BSAE reduced the original cumulative fatigue factors to 12 dimensions, while the K-means clustering grouped the reduced fatigue features into three categories: no fatigue, moderate fatigue, and sever fatigue. Six occupational stress prediction models were constructed using the three-category labels of cumulative fatigue and ten additional factors. The results indicated that the LightGBM model performed best, achieving an area under the curve (AUC) of 0.78, an accuracy of 0.77, and an F1 score of 0.72. Compared with the model incorporating the traditional binary labels for cumulative fatigue, the best prediction AUC (0.72), accuracy (0.66), and F1 score (0.65) improved by 6%, 11%, and 7%, respectively. Conclusion Cumulative fatigue is a significant predictor of occupational stress among manufacturing employees. Applying data dimensionality reduction combined with three-class cluster analysis to characterize cumulative fatigue improves the performance of occupational stress prediction models. From a data-driven perspective, machine learning methods demonstrate strengths in processing complex datasets, capturing nonlinear relationships, and generating predictions based on key variables. This study therefore confirms that refined processing of core factors substantially enhances the predictive capability of machine learning models in assessing occupational stress risk in the manufacturing workforce.

Mitochondria are the main site of energy metabolism within cells,generating a substantial amount of ATP to supply energy to the human body.Research has shown that alterations in mitochondrial structure and function exist in individuals with schizophrenia,suggesting their potential impact on the onset of psychiatric disorders and clinical treatment efficacy.Therefore,understanding the research progress on the genetic mechanisms,pathological processes,image manifestations of schizophrenia and mitochondrial quality control,and summarizing the relevant evidence of mitochondrial-related targets as potential therapeutic targets for schizophrenia,can provide references for further research.

Objective:To conduct a comparative analysis of the radiation damage to zebrafish embryos and the associated biological mechanism after ultra-high dose rate (FLASH) and conventional dose rate irradiation.Methods:Zebrafish embryos at 4 h post-fertilization were exposed to conventional and FLASH irradiation (9 MeV electron beam). The mortality and hatchability of zebrafish after radiation exposure were recorded. Larvae at 96 h post-irradiation underwent morphological scoring, testing of reactive oxygen species (ROS) levels, and analysis of changes in oxidative stress indicators.Results:Electron beam irradiation at doses of 2-12 Gy exerted subtle effects on the mortality and hatchability of zebrafish embryos. However, single high-dose irradiation (≥ 6 Gy) could lead to developmental malformation of larvae, with conventional irradiation showing the most significant effects ( t = 0.87-9.75, P < 0.05). In contrast, after FLASH irradiation (≥ 6 Gy), the ROS levels in zebrafish and its oxidative stress indicators including superoxide dismutase (SOD), catalase (CAT), and malondialdehyde (MDA) were significantly reduced ( t = 0.42-15.19, P < 0.05). There was no statistically significant difference in ROS levels in incubating solutions after conventional and FLASH irradiation ( P > 0.05). Conclusions:Compared to conventional irradiation, FLASH irradiation can reduce radiation damage to zebrafish embryos, and this is in a dose-dependent manner. The two irradiation modes lead to different oxidative stress levels in zebrafish, which might be a significant factor in the reduction of radiation damage with FLASH irradiation.

Schizophrenia is a common chronic mental disorder.Cognitive dysfunction is one of its core symptoms,which severely affects the social functioning of patients.Currently,antipsychotic medication treatments have poor efficacy in improving cognitive functions.Recent studies have found that metformin can improve cognitive dysfunction in patients with schizophrenia.However,the mechanism of action remains unclear.This review summarizes the therapeutic effects of metformin on cognitive dysfunction in schizophrenia patients such as improving insulin resistance,repairing neuronal damage,regulating neuroimmunity,and combating oxidative stress,thereby providing new insights for the treatment of cognitive dysfunction in schizophrenia.

Objective:To investigate the accuracy of magnetic resonance imaging (MRI) cine sequences in determining the range of tumor motion in radiotherapy, providing a basis for the precise delineation of the target volume in motion for radiation therapy.Methods:A modified chest motion phantom was placed in a MRI scanner, and a water-filled sphere was used to simulate a tumor. True fast imaging with steady precession (TrueFISP) MRI cine sequences from Siemens were used to capture the two-dimensional motion images of the simulated tumor. The phantom experiments were divided into three modes: head-foot motion mode, rotation motion mode, and actual respiratory waveform mode. In the head-foot motion mode, respiratory motion period (3, 4, 5, 6, 7 and 8 s), amplitude (5, 10 and 15 mm), and respiratory waveform of the simulated tumor (sin and cos4) were set, resulting in a total of 36 motion combinations. In the rotation motion mode, a cos4 waveform was used for respiration, with respiratory periods of 3, 4, 5, 6, 7 and 8 s, head-foot motion set amplitudes of 5, 10 and 15 mm, and anterior-posterior (AP) and left-right (LR) motion set amplitudes in three combinations ([2.5, 2.5] mm, [2.5, 5.0] mm, [5.0, 5.0] mm), resulting in a total of 54 motion combinations. In the actual respiratory waveform mode, respiratory waveforms of 5 randomly selected patients from Affiliated Cancer Hospital of Zhengzhou University were obtained. Under each motion combination, TrueFISP cine images (30 frames, with an acquisition time of 11 s per frame) were obtained. The code was used to automatically identify the two-dimensional coordinates of the center of the simulated tumor in each image, and sin and cos4 functions were separately employed to fit the tumor position in the motion direction, thereby obtaining the fitted motion period and amplitude. The difference between the maximum and minimum values of the tumor's center coordinates in the head-to-foot direction is taken as the range of movement, referred to as the calculated amplitude. For the actual respiratory waveform, the distance between the measured maximum and minimum positions is used to calculate the amplitude.Results:In the head-foot motion mode, the fitted amplitudes of both sin and cos4 waveforms deviated from the set amplitudes by 0-0.51 mm, with relative deviations of 0%-4.2%. The deviation range between the calculated amplitudes and the set amplitudes of the two waveforms were 0.08-0.94 mm, with relative deviations of 1.1%-6.3%. In the rotation motion mode, the fitted amplitudes deviated from the set amplitudes by 0-0.61 mm, with relative deviations of 0%-6.2%. And the deviation range between the calculated amplitudes and the set amplitudes were 0.16-0.94 mm, with relative deviations of 0%-6.3%. In the actual respiratory waveform motion mode, the deviation range between the calculated amplitudes and the set amplitudes were 0.10-0.48 mm, with relative deviations of 2.2%-8.6%.Conclusion:TrueFISP cine sequences show minimal deviations in determining the range of tumor head-foot motion and effectively captures the tumor's movement state, thereby providing important support for the precise definition of the tumor movement target area during radiotherapy .

Objective:To explore the characteristic pathological manifestations of non-HLA antibodies after kidney transplantation (KT) and examine the differences of MFT values of non-HLA antibodies in different pathological manifestations.Methods:The study was conducted on KT recipients at the First Affiliated Hospital of Zhengzhou University from February 2021 to June 2023 with unexplained elevated serum creatinine. Patients undergoing pathological puncture and concurrent HLA antibody testing were included, focusing on those with DSA (MFI>4 000) and non-HLA antibody negativity. According to the detection results of non-HLA and HLA antibodies, they were assigned into two groups of non-HLA antibody positive (45 cases) and HLA-DSA positive (28 cases). Both non-HLA and HLA antibodies were detected by luminex single antigen microbeads, χ2, t or Mann-Whitney U nonparametric tests were utilized for examining the inter-group differences in pathological manifestations. The recipients with positive non-HLA antibodies were grouped according to the differential pathological features[microvascular inflammation group (22 cases) and non-microvascular inflammation group (23 cases), interstitial fibrosis group (39 cases) and non-interstitial fibrosis (9 cases) ]. MFI values of non-HLA antibodies were standardized and heat map was generated with R language ComplexHeatmap package. The differences of response values of non-HLA antibodies with different pathological manifestations were examined by rank-sum test. Results:The positive rates of microvascular inflammation were 48.9% (22/45) and 82.1% (23/28) in HLA-DSA positive and non-HLA antibody positive groups with statistical significance ( χ2=8.073, P=0.006). The positive rates of interstitial fibrosis in two groups were 80.8% (36/45) and 53.6% (15/28) and the difference was statistically significant ( χ2=5.726, P=0.021). The relative levels of anti-arachnotoxin receptor 1 (Latrophilin 1, LPHN1), keratin 8 (KRT8), keratin 18 (KRT18) and Sjogren's syndrome antigen B (SSB) were higher in microvascular inflammation group than those in non-microvascular inflammation group. The differences were statistically significant [559.50 (262.00, 801.25) vs 285.00 (183.00, 460.00), P=0.024; 504.50 (369.5, 725.25) vs 317.00 (231.50, 458.00), P=0.014; 672.50 (454.50, 969.50) vs 399.00 (246.50, 772.50), P=0.030; 967.50 (482.00, 2 066.50) vs 399.00 (246.50, 772.50), P=0.033]. The relative levels of anti-cyclic citrullinate peptide (CCP), colony-stimulating factor 2 (CSF2), intercellular adhesion molecule 1 (ICAM1) and collagen Ⅳ antibody were higher in interstitial fibrosis group than those in non-interstitial fibrosis group with statistical significance [100.00 (79.88, 167.50) vs 64.50 (37.00, 89.00), P=0.016; 146.25 (93.38, 244.75) vs 87.00 (66.00, 105.00), P=0.041; 132.50 (106.38, 229.50) vs 95.00 (55.00, 125.00), P=0.037; 432.50 (280.75, 653.75) vs 208.00 (192.00, 301.00), P=0.028]. Conclusions:As compared with HLA-DSA, the characteristic pathological manifestations of non-HLA antibodies post-KT include a lower incidence of microvascular inflammation and a higher incidence of interstitial fibrosis. For non-HLA antibody response values of characteristic pathological manifestations, the expressions of different non-HLA antibodies vary statistically.

This paper summarized professor ZHANG Boli's experience in treating stubborn bi （痹） with the herbal pair of Ruxiang （Olibanum）- Moyao （Myrrha）. The basic pathogenesis of stubborn bi is channel and collateral stasis and obstruction. Ruxiang and Moyao are thus used in mutual reinforcement to rectify qi and diffuse bi， activate blood and relieve pain， thereby removing static and obstructed qi and blood， unblocking the obstructed channels and colla-terals， which is especially suitable for stubborn bi caused by channel and collateral obstruction. In clinical practice， the herbal pair of Ruxiang-Moyao is used together with qi-moving and blood-activating medicinals to treat chest bi by expelling stasis and diffusing stagnation， dissipating cold and unblocking vessels. To treat long-term wither and weakness in late stage of stroke， the medicinals of boosting qi and invigorating blood， unblocking channels and venting collaterals can be added to the herbal pair so as to soothe and drain vessels and collaterals， harmonize and regulate qi and blood. Simiao Yongan Decoction （四妙勇安汤） can be integrated in the treatment of vessel bi by moving qi and dissolving stasis， and for the long-term stubborn vessel bi， integrated internal and external treatment is suggested by external use of Ruxiang-Moyao to vent bi with aromatics. Moreover， it is emphasized to use the herbal pair of Ruxiang-Moyao in accordance with indications and cautions.

Objective:To evaluate the usability of Gafchromic HD-V2 film for dose dosimetry in the ultra-high dose-rate (UD) electron beam from a modified medical linac, and to investigate the response between the energy and dose-rate dependence to the film.Methods:The HD-V2 film was utilized to measure the average dose-rate of the UD electron beam. The measured result was compared with those by advanced Markus chamber and alanine pellets. And characteristics of the UD electron beam were also measured by HD-V2 film. Energy dependence of HD-V2 film at three beam energies (6 MV X-ray, 9 MeV and 16 MeV electron beam) was investigated by obtaining and comparing the calibration curves based on the clinical linear accelerator in the dose range of 10-300 Gy. The dose-rate dependence of HD-V2 film was also studied by varying the dose rate among 0.03 Gy/s, 0.06 Gy/s and 0.1 Gy/s, and range of 100-200 Gy/s.Results:The measured average maximum dose-rate of 9 MeV UD electron beam at source skin distance (SSD) 100 cm was approximately 121 Gy/s using HD-V2 film, consistent with the results by advanced Markus chamber and alanine pellets. The measured percentage depth dose (PDD) curve parameters of the UD electron beam were similar to the conventional 9 MeV beam. The off-axis dose distribution of the UD electron beam showed the highest central axis, and the dose was gradually decreased with the increase of off-axis distance. The energy dependence of HD-V2 film had no dependency of 6 MV and 9, 16 MeV while measuring the dose in the range from 20 to 300 Gy. The HD-V2 film had no significant dose-rate dependency at the dose rate of 0.03 Gy/s, 0.06 Gy/s and 0.1 Gy/s for the clinical linear accelerator. Likewise, there was also no dose-rate dependence in the range 100-200 Gy/s in the modified machine.Conclusion:HD-V2 film is suitable for measuring ultra-high dose rate electron beam, independent of energy and dose rate.