Objective:To explore the clinical characteristics, diagnosis and treatment strategies, and prognosis of pulmonary embolism (PE) complicating childhood rheumatic diseases.Methods:A retrospective case series study was performed on the demographic data, laboratory indicators, imaging features, treatment regimens, and follow-up data of 8 children with rheumatic diseases complicated by PE who were admitted to the Department of Rheumatology and Immunology, Capital Center for Children′s Health, Capital Medical University from January 2014 to October 2023.Results:Among the 8 children, there were 4 boys and 4 girls, with an age of 12.0 (7.5, 13.0) years. Among the primary diseases, there were 3 cases of systemic lupus erythematosus, 2 cases of Beh?et′s disease, 2 cases of Takayasu arteritis, and 1 case of antiphospholipid syndrome. All children developed PE during the active phase of the primary disease. PE was detected at the onset of the primary disease in 3 cases, and the median time from the diagnosis of the primary disease to the development of PE was 10.0 (6.0, 25.0) months in the remaining 5 cases. Fever was present in all 8 children, 4 cases were accompanied by chest tightness, dyspnea, etc., and 2 cases only presented with fever. Laboratory examinations revealed the following results: erythrocyte sedimentation rate was 42.0 (17.0, 78.0) mm/1 h, high-sensitivity C-reactive protein was 12.7 (2.6, 78.7) mg/L, white blood cell count was 9.6 (7.2, 18.7)×10 9/L; D-dimer was 2.3 (0.9, 6.2) mg/L; and hemoglobin was (109±16) g/L.Imaging examinations revealed that 5 cases had involvement of the bilateral lower pulmonary arteries, 5 cases had peripheral embolism, and 3 cases had central PE. Complications included 3 cases of deep vein thrombosis, 2 cases of intracranial venous sinus thrombosis, and 1 case of mild pulmonary hypertension.In terms of treatment, 7 cases received anticoagulation with heparin followed by warfarin. Immunomodulation was mainly based on glucocorticoids combined with immunosuppressants, and 4 cases were combined with biological agents. The follow-up time of 4.17 (1.75, 7.17) years, the time for complete absorption of PE was 10.5 (6.0, 18.0) months; all 8 children had no target events, with no recurrence or chronic thromboembolic pulmonary hypertension, and the pulmonary artery remodeling was good. Conclusions:PE complicating childhood rheumatic diseases is closely related to the activity of the primary disease. The clinical manifestations are insidious, with fever as the main symptom. Imaging examination is the key to diagnosis.Early adoption of heparin followed by warfarin anticoagulation and glucocorticoids combined with immunosuppressants and (or) biological agents to control the primary disease can achieve a favorable prognosis.

Objective To investigate the expression of carcinoembryonic antigen-related cell adhesion molecule 6 (CEACAM6) in esophageal squamous cell carcinoma (ESCC) and analyze its correlation with immune cell infiltration and patient prognosis. Methods Three ESCC datasets (GSE161533, GSE26886, and GSE23400) from the GEO database were analyzed to identify differentially expressed genes. CEACAM6 was identified as a key gene through survival analysis. Its expression, prognostic value, and relationship with immune cell infiltration were further explored using databases, such as TIMER. Tissue samples were collected from 162 patients with ESCC. Immunohistochemistry was performed to detect the expression of CEACAM6, immune cell markers (CD4, CD8, CD20, and CD56), and immune checkpoint molecules (HHLA2 and CD40LG). Correlations between CEACAM6 expression and clinicopathological features, immune cell infiltration, and immune checkpoints were analyzed. Results Bioinformatic analysis and clinical sample validation confirmed that CEACAM6 expression was significantly upregulated in ESCC tissues compared with adjacent nontumor tissues (P<0.05). High CEACAM6 expression was closely associated with advanced clinical stage (AJCC Ⅲ-Ⅳ), high T stage (T3-T4), lymph node metastasis, nonulcerative type, and poor prognosis. Furthermore, CEACAM6 expression levels were positively correlated with the infiltration density of CD8⁺ T cells, CD4⁺ T cells, and CD20⁺ B cells within the tumor microenvironment and with the expression of the immune checkpoint molecules HHLA2 and CD40LG (all P<0.05). Conclusion CEACAM6 serves as an independent poor prognostic factor for ESCC. Its high expression is implicated in the modulation of the tumor immune microenvironment by correlating with specific immune cell infiltration and immune checkpoint molecules, suggesting its potential as a novel prognostic biomarker and immunotherapeutic target for ESCC.

BACKGROUND:Clinical studies suggest that both bone quality and excessive crown-to-implant ratio are factors that affect the success rate of implant surgery,but there is no consensus on how large the crown-to-implant ratio under each bone quality will affect the prognosis of implant repair.OBJECTIVE:To analyze the stress and strain of bone tissue around implant restorations with different crown-to-implant ratios under different bone types after stress loading using three-dimensional finite element method.Combined with the Frost bone mechanics regulation system theory,the physiological limits of bone strain were observed for each bone type within a certain range of crown to implant ratios.METHODS:Cone beam CT data were selected from a patient to establish solid bone block models with four different bone types(class Ⅰ bone:cortical bone thickness 3 mm+dense cancellous bone,class Ⅱ bone:cortical bone thickness 2 mm+relatively dense cancellous bone,class Ⅲ bone:cortical bone thickness 1 mm+relatively low-density cancellous bone,class Ⅳ bone:cortical bone thickness 1 mm+low-density cancellous bone).Implant restorations with five different crown-to-implant ratios(1,1.5,2,2.5,and 3)were created on each bone block model,for a total of 20 models.Vertical and oblique forces were applied to the dental crown to observe the von Mises stress values,strains,and displacement of the cortical and cancellous bones,as well as the degree of implant displacement.RESULTS AND CONCLUSION:(1)In the class Ⅰ bone model,when the crown-to-implant ratio reached 3 under oblique loading,the cortical bone strain exceeded the physiological limit.In the class Ⅱ bone model,under oblique loading,when the crown-to-implant ratio reached 2.5,the cortical bone strain exceeded the physiological limit.In the class Ⅲ bone model,under oblique loading,cortical bone exceeded the physiological limit when the crown-to-implant ratio reached 2.5,while cancellous bone reached the critical physiological limit at 1.In the class Ⅳ bone model,under oblique loading,when the crown-to-implant ratio reached 1.5,2,2.5,and 3,the cortical bone strain exceeded the physiological limit.In the class Ⅳ bone model,all five crown-to-implant ratios of cancellous bone exceeded physiological limits.(2)Under vertical load,the cancellous bone strain exceeded the physiological limit when the crown-root ratio reached 1,2,2.5,and 3 in the class Ⅲ bone model,and when the cancellous bone strain of the five crown-root ratios in the class Ⅳ bone model exceeded the physiological limit.(3)Under oblique or vertical load,the implant displacement of the 20 groups of models did not exceed 100 μm.(4)From the perspective of biomechanics,when patients with insufficient bone height choose implant restoration,the crown-root ratio that class Ⅰ bone can tolerate is up to 2.5 times,the crown-root ratio that class Ⅱ bone can tolerate is up to 2 times,and the crown-root ratio that class Ⅲ and class Ⅳ bones can tolerate is up to 1 times due to excessive strain of cancellous bone;but the crown-root ratio that cortical bone in class Ⅲ bone can tolerate is up to 2 times.Whether class Ⅲ bone can tolerate implant restoration with a high crown-root ratio and whether cancellous bone can tolerate higher strains needs further study.

BACKGROUND:Clinical studies suggest that both bone quality and excessive crown-to-implant ratio are factors that affect the success rate of implant surgery,but there is no consensus on how large the crown-to-implant ratio under each bone quality will affect the prognosis of implant repair.OBJECTIVE:To analyze the stress and strain of bone tissue around implant restorations with different crown-to-implant ratios under different bone types after stress loading using three-dimensional finite element method.Combined with the Frost bone mechanics regulation system theory,the physiological limits of bone strain were observed for each bone type within a certain range of crown to implant ratios.METHODS:Cone beam CT data were selected from a patient to establish solid bone block models with four different bone types(class Ⅰ bone:cortical bone thickness 3 mm+dense cancellous bone,class Ⅱ bone:cortical bone thickness 2 mm+relatively dense cancellous bone,class Ⅲ bone:cortical bone thickness 1 mm+relatively low-density cancellous bone,class Ⅳ bone:cortical bone thickness 1 mm+low-density cancellous bone).Implant restorations with five different crown-to-implant ratios(1,1.5,2,2.5,and 3)were created on each bone block model,for a total of 20 models.Vertical and oblique forces were applied to the dental crown to observe the von Mises stress values,strains,and displacement of the cortical and cancellous bones,as well as the degree of implant displacement.RESULTS AND CONCLUSION:(1)In the class Ⅰ bone model,when the crown-to-implant ratio reached 3 under oblique loading,the cortical bone strain exceeded the physiological limit.In the class Ⅱ bone model,under oblique loading,when the crown-to-implant ratio reached 2.5,the cortical bone strain exceeded the physiological limit.In the class Ⅲ bone model,under oblique loading,cortical bone exceeded the physiological limit when the crown-to-implant ratio reached 2.5,while cancellous bone reached the critical physiological limit at 1.In the class Ⅳ bone model,under oblique loading,when the crown-to-implant ratio reached 1.5,2,2.5,and 3,the cortical bone strain exceeded the physiological limit.In the class Ⅳ bone model,all five crown-to-implant ratios of cancellous bone exceeded physiological limits.(2)Under vertical load,the cancellous bone strain exceeded the physiological limit when the crown-root ratio reached 1,2,2.5,and 3 in the class Ⅲ bone model,and when the cancellous bone strain of the five crown-root ratios in the class Ⅳ bone model exceeded the physiological limit.(3)Under oblique or vertical load,the implant displacement of the 20 groups of models did not exceed 100 μm.(4)From the perspective of biomechanics,when patients with insufficient bone height choose implant restoration,the crown-root ratio that class Ⅰ bone can tolerate is up to 2.5 times,the crown-root ratio that class Ⅱ bone can tolerate is up to 2 times,and the crown-root ratio that class Ⅲ and class Ⅳ bones can tolerate is up to 1 times due to excessive strain of cancellous bone;but the crown-root ratio that cortical bone in class Ⅲ bone can tolerate is up to 2 times.Whether class Ⅲ bone can tolerate implant restoration with a high crown-root ratio and whether cancellous bone can tolerate higher strains needs further study.

Objective:To explore the clinical characteristics, diagnosis and treatment strategies, and prognosis of pulmonary embolism (PE) complicating childhood rheumatic diseases.Methods:A retrospective case series study was performed on the demographic data, laboratory indicators, imaging features, treatment regimens, and follow-up data of 8 children with rheumatic diseases complicated by PE who were admitted to the Department of Rheumatology and Immunology, Capital Center for Children′s Health, Capital Medical University from January 2014 to October 2023.Results:Among the 8 children, there were 4 boys and 4 girls, with an age of 12.0 (7.5, 13.0) years. Among the primary diseases, there were 3 cases of systemic lupus erythematosus, 2 cases of Beh?et′s disease, 2 cases of Takayasu arteritis, and 1 case of antiphospholipid syndrome. All children developed PE during the active phase of the primary disease. PE was detected at the onset of the primary disease in 3 cases, and the median time from the diagnosis of the primary disease to the development of PE was 10.0 (6.0, 25.0) months in the remaining 5 cases. Fever was present in all 8 children, 4 cases were accompanied by chest tightness, dyspnea, etc., and 2 cases only presented with fever. Laboratory examinations revealed the following results: erythrocyte sedimentation rate was 42.0 (17.0, 78.0) mm/1 h, high-sensitivity C-reactive protein was 12.7 (2.6, 78.7) mg/L, white blood cell count was 9.6 (7.2, 18.7)×10 9/L; D-dimer was 2.3 (0.9, 6.2) mg/L; and hemoglobin was (109±16) g/L.Imaging examinations revealed that 5 cases had involvement of the bilateral lower pulmonary arteries, 5 cases had peripheral embolism, and 3 cases had central PE. Complications included 3 cases of deep vein thrombosis, 2 cases of intracranial venous sinus thrombosis, and 1 case of mild pulmonary hypertension.In terms of treatment, 7 cases received anticoagulation with heparin followed by warfarin. Immunomodulation was mainly based on glucocorticoids combined with immunosuppressants, and 4 cases were combined with biological agents. The follow-up time of 4.17 (1.75, 7.17) years, the time for complete absorption of PE was 10.5 (6.0, 18.0) months; all 8 children had no target events, with no recurrence or chronic thromboembolic pulmonary hypertension, and the pulmonary artery remodeling was good. Conclusions:PE complicating childhood rheumatic diseases is closely related to the activity of the primary disease. The clinical manifestations are insidious, with fever as the main symptom. Imaging examination is the key to diagnosis.Early adoption of heparin followed by warfarin anticoagulation and glucocorticoids combined with immunosuppressants and (or) biological agents to control the primary disease can achieve a favorable prognosis.

Objective: To develop a convenient, direct, and highly sensitive method for screening trace chemical additives in complex Chinese patent medicines, thereby addressing core technological bottlenecks in pharmaceutical analysis and quality control. Methods: A brush ionization probe device was independently designed and constructed, and an efficient detection method was established through systematic optimization of key parameters. Twenty-three Chinese patent medicine samples, representing 6 dosage forms (capsules, tablets, pills, granules, powders, and liquid preparations), were analyzed using 10 common chemical additives as target analytes. Results: All samples were successfully analyzed without complex pretreatment, and 5 chemical additives were detected in 7 Chinese patent medicines. The brush ionization probe device exhibited cost-effectiveness (~0.2 USD per probe), operational simplicity, rapid analysis (~10s per sample), high efficiency, and minimal reagent consumption (~10 μL per sample). Conclusion: This advancement is expected to provide an innovative scientific tool for improving the generality and convenience of on-site quality control, while promoting technological progress in disciplines such as pharmacology and traditional Chinese medicine.

ObjectiveTo explore the clinical efficacy and safety of Da Chaihutang （DCH） for the treatment of sepsis with Yang syndrome. MethodsA total of 70 patients suffering from sepsis with Yang syndrome were randomly divided into an observation group and a control group， with 35 cases in each group. They both received standard Western medicine treatment. The observation group was additionally given a dose of DCH， which was boiled into 100 mL and taken twice. The control group was additionally given an equal volume and dosage of warm water. The intervention lasted for three days. The 28-day all-cause mortality and the changes in the following indicators before and after intervention were compared between the two groups， including sequential organ failure assessment （SOFA）， acute physiology and chronic health evaluation Ⅱ （APACHE Ⅱ） score，white blood cell （WBC），the percentage of neutrophils （NEU%），C-reactive protein （CRP），procalcitonin （PCT），alanine transaminase （ALT），aspartate transaminase （AST），total bilirubin （TBil），creatinine （Cr），blood urea nitrogen （BUN），acute gastrointestinal injury （AGI） grade，gastrointestinal dysfunction score （GDS），serum intestinal fatty acid-binding protein （iFABP）， citrulline （CR），platelet （PLT），prothrombin time（PT），activated partial thromboplastin time （APTT），fibrinogen （Fib），international normalized ratio （INR），and D-dimer （D-D）. ResultsThere was no significant difference between the two groups regarding 28-day all-cause mortality. After the intervention，SOFA，WBC，PCT，and Cr were significantly decreased， and PLT was significantly increased in the control group （P<0.05）. SOFA，APACHE Ⅱ，NEU%，CRP，PCT，ALT，AST，Cr，BUN，AGI grade，GDS，and serum iFABP and CR were significantly improved in the observation group （P<0.05）. After the intervention，APACHE Ⅱ，PCT，AGI grade，GDS，and serum iFABP in the observation group were significantly lower than those in the control group ，while CR and PLT were higher （P<0.05，P<0.01）. There were significant differences regarding the gap of SOFA，APACHE Ⅱ，AST，TBil，AGI grade，GDS，iFABP，CR， and PLT between the two groups （P<0.05，P<0.01）. There were slight differences regarding PT，APTT，Fib，INR，and D-D between the two groups，which were in the clinical normal range. ConclusionOn the basis of Western medicine， DCH helped to reduce sepsis severity and improved multiple organ dysfunction with high clinical efficacy and safety， but further research on its impact on the prognosis of patients with sepsis is still required.

Osteoporosis is a common senile bone metabolism disease， clinically characterized by decreased bone mass， destruction of bone microstructure， increased bone fragility， and easy fracture. It tends to occur in the elderly and postmenopausal women， seriously threatening the quality of life and physical and mental health of the elderly. At present， the treatment of osteoporosis is mainly based on oral western medicines， such as calcium， Vitamin D， and bisphosphonates. Still， there are drawbacks such as a long medication cycle and many adverse reactions. In recent years， due to the advantages of multi-component， multi-pathway， and multi-target， some traditional Chinese medicines and effective ingredients can regulate the osteogenic and osteoclastic differentiation process in both directions and are widely used in the prevention and treatment of osteoporosis. Hippophae rhamnoides is a commonly used herbal medicine， and its fruits are rich in flavonoids， polyphenols， fatty acids， vitamins， and trace elements， which have been proven to have a good anti-osteoporosis effect. Isorhamnetin is the main effective ingredient of Hippophae rhamnoides fruits， which has many pharmacological effects such as anti-inflammation， anti-oxidative stress， anti-aging， and anti-tumor. Studies have shown that isorhamnetin can participate in the regulation of bone metabolism and has a good anti-osteoporosis effect. However， the pharmacological effects and related mechanisms of isorhamnetin against osteoporosis have not been systematically summarized. Therefore， this paper reviewed the pharmacological effects and related mechanisms of isorhamnetin against osteoporosis by referring to relevant literature to provide more basis for the development and application of isorhamnetin.

BACKGROUND:Cervical disc herniation can cause pain in the neck and shoulder area,as well as radiating pain in the upper limbs.The incidence rate is increasing year by year and tends to affect younger individuals.Fully understanding the biomechanical characteristics of the cervical spine in adolescents is of great significance for preventing and delaying the onset of cervical disc herniation in this age group. OBJECTIVE:To reconstruct cervical spine models for both healthy adolescents and adolescent patients with cervical disc herniation utilizing finite element analysis techniques,to analyze the motion range of the C1-T1 cervical vertebrae as well as the biomechanical characteristics of the annulus fibrosus,nucleus pulposus,endplates,and the cartilage of the small joints. METHODS:A normal adolescent's cervical spine and an adolescent patient with cervical disc herniation were selected in this study.The continuous scan cervical spine CT raw image data were imported into Mimics 21.0 in DICOM format.The C1-T1 vertebrae were reconstructed separately.Subsequently,the established models were imported into the 3-Matic software for disc reconstruction.The perfected models were then imported into Hypermesh software for meshing of the vertebrae,nucleus pulposus,annulus fibrosus,and ligaments,creating valid geometric models.After assigning material properties,the final models were imported into ABAQUS software to observe the joint motion range of the C1-C7 cervical vertebrae segments under different conditions,and to analyze the biomechanical characteristics of the annulus fibrosus,nucleus pulposus,endplates,and small joint cartilage of each cervical spine segment. RESULTS AND CONCLUSION:(1)In six different conditions,the joint motion range of the C1 vertebra in the cervical spine models of both normal adolescent and adolescent patient with cervical disc herniation was higher than that of the other vertebrae.Additionally,the joint motion range of each cervical spine segment in normal adolescent was greater than that in adolescent patient with cervical disc herniation.(2)In the cervical spine model of normal adolescent,the maximum stress values in the annulus fibrosus and nucleus pulposus were found on the left side during C2-3 flexion conditions(0.43 MPa and 0.17 MPa,respectively).In the cervical spine model of adolescent patient with cervical disc herniation,the maximum stress values were found on the left side during C7-T1 flexion conditions(0.54 MPa and 0.18 MPa,respectively).(3)In the cervical spine model of normal adolescent,the maximum stress value on the endplate was found on the left side of the upper endplate of C3 during flexion conditions(1.46 MPa).In the model of adolescent patient with cervical disc herniation,the maximum stress value on the endplate was found on the left side of the lower endplate of C7 during flexion conditions(1.32 MPa).(4)In the cervical spine model of normal adolescent,the maximum stress value in the small joint cartilage was found in the C2-3 left rotation conditions(0.98 MPa).In adolescent patient with cervical disc herniation,the stress in the small joint cartilage significantly increased under different conditions,especially in C1-2,with the maximum stress found during left flexion(3.50 MPa).(5)It is concluded that compared to normal adolescent,adolescent patient with cervical disc herniation exhibits altered cervical curvature and a decrease in overall joint motion range in the cervical spine.In adolescent with cervical disc herniation,there is a significant increase in stress on the annulus fibrosus,nucleus pulposus,and endplates in the C7-T1 segment.The stress on the left articular cartilage of the C1-2 is notable.Abnormal cervical curvature may be the primary factor causing these stress changes.

Given that ovarian stimulation is vital for assisted reproductive technology (ART) and results in elevated serum estrogen levels, exploring the impact of elevated estrogen exposure on oocytes and embryos is necessary. We investigated the effects of various ovarian stimulation treatments on oocyte and embryo morphology and gene expression using a mouse model and estrogen-treated mouse embryonic stem cells (mESCs). Female C57BL/6J mice were subjected to two types of conventional ovarian stimulation and ovarian hyperstimulation; mice treated with only normal saline served as controls. Hyperstimulation resulted in high serum estrogen levels, enlarged ovaries, an increased number of aberrant oocytes, and decreased embryo formation. The messenger RNA (mRNA)‍-sequencing of oocytes revealed the dysregulated expression of lysine-specific demethylase 6b (Kdm6b), which may be a key factor indicating hyperstimulation-induced aberrant oocytes and embryos. In vitro, Kdm6b expression was downregulated in mESCs treated with high-dose estrogen; treatment with an estrogen receptor antagonist could reverse this downregulated expression level. Furthermore, treatment with high-dose estrogen resulted in the upregulated expression of histone H3 lysine 27 trimethylation (H3K27me3) and phosphorylated H2A histone family member X (γ-H2AX). Notably, knockdown of Kdm6b and high estrogen levels hindered the formation of embryoid bodies, with a concomitant increase in the expression of H3K27me3 and γ-H2AX. Collectively, our findings revealed that hyperstimulation-induced high-dose estrogen could impair the demethylation of H3K27me3 by reducing Kdm6b expression. Accordingly, Kdm6b could be a promising marker for clinically predicting ART outcomes in patients with ovarian hyperstimulation syndrome.
Female ; Mice ; Demethylation/drug effects* ; Embryonic Stem Cells ; Estrogens/administration & dosage* ; Gene Expression/drug effects* ; Histones/metabolism* ; Jumonji Domain-Containing Histone Demethylases/metabolism* ; Mice, Inbred C57BL ; Oocytes ; Ovary/drug effects* ; Reproductive Techniques, Assisted ; Animals