[Objective] To analyze the prognostic value of prostate cancer (PCa) pyroptosis-related genes (PRGs) using gene expression databases and to explore the regulatory mechanism of nucleotidebinding oligomerization domain-like receptor containing pyrin domain 1 (NLRP1) in the pyroptosis of PCa cells. [Methods] Fragments per kilobase of exon model per million reads mapped (FPKM) data and clinical information from PCa and adjacent tissues from The Cancer Genome Atlas (TCGA) and Gene Expression Omnibus (GEO) were obtained. Differentially expressed PRGs between PCa and adjacent tissues, classified subtypes and plotted survival curves were analyzed. Univariate Cox regression analysis, least absolute shrinkage and selection operator (LASSO) regression analysis were conducted to screen prognosis-related PRGs, risk scores were calculated, and a prognostic risk model was constructed and validated. Patients were divided into high and low risk groups based on the median risk scores from the training and validation sets, and gene ontology (GO) enrichment and kyoto encyclopedia of genes and genomes (KEGG) analysis were conducted on differentially expressed PRGs. Quantitative real-time polymerase chain reaction (qRT-PCR) was used to detect the expression level of NLRP1 in PCa cell lines, and pyroptosis was induced in DU145 and LNCaP cells while morphological changes were observed. Western blot (WB) was performed to detect the expression of pyroptosis-related molecules. [Results] A total of 6 prognostic-related PRGs were obtained, including CHMP4C, CYCS, GPX4, GSDMB, NLRP1, and PLCG1. The risk score was positively correlated with the risk of recurrence but negatively correlated with the progression-free survival (P<0.001). The area under the receiver operating characteristic curves (AUCs) for the training set at 1, 3, and 5 years were 0.769 (95%CI: 0.652-0.878), 0.804 (95%CI: 0.736-0.882), and 0.772 (95%CI: 0.631-0.905), respectively, while those for the validation set were 0.731 (95%CI: 0.647-0.826), 0.753 (95%CI: 0.674-0.818), and 0.763 (95%CI: 0.626-0.849), respectively. Differences in expression levels of the 6 PRGs were observed between the high and low risk groups in both the training and validation sets (P<0.05). Cox regression analysis showed that T stage, prostate specific antigen (PSA), Gleason grade, and risk score were independent predictors of PCa prognosis (P<0.05). Differences in risk scores were observed among patients of different ages, T stages, and Gleason grades (P<0.05). NLRP1 was found to be lowly expressed in PCa cell lines and was involved in the regulation of pyroptosis in DU145 and LNCaP cells. [Conclusion] The prognostic risk model constructed based on PRGs has a certain predictability for the prognosis of PCa patients, and NLRP1 may be involved in the regulation of pyroptosis in PCa cells.

Objective·To fabricate a 3D-printed dental crown and bridge resin slurry using digital light processing(DLP)technology,investigate the influence of different printing parameters on its mechanical properties,determine the optimal printing parameters,and optimize the composition ratio of DLP-printed crown and bridge resin.Methods·Based on the viscosity characteristics of the mixture,the optimal ratio of urethane dimethacrylate(UDMA)to poly(propylene glycol)dimethacrylate(PPGDMA)was explored.After silanizing silicon dioxide(SiO2),it was mixed with UDMA,PPGDMA,and 2,4,6-trimethylbenzoyl bis(p-tolyl)phosphine oxide(TMO)to prepare DLP-printed dental crown and bridge resin slurries with different solid contents,and their rheological properties were tested.The Beer-Lambert equation was used to calculate the light penetration depth and critical exposure energy of the printing slurry.Based on these values,different exposure intensities,exposure times,post-curing times,and layer thicknesses were set respectively to carry out a series of printing experiments.By comparing and analyzing the flexural strength of the products under different printing parameters,the optimal printing parameter combination was screened out.Results·Viscosity tests showed that the optimal UDMA-to-PPGDMA ratio was 6∶4.The rheological behavior of printing slurries with different solid contents was tested,and the results showed that the DLP-printed dental crown and bridge resin with a solid content of 22%exhibited the best printing performance.According to the Beer-Lambert analysis,the light penetration depth Dp of the printing slurry was 119.79 μm,and the critical exposure energy Ec was 25.54 mJ/cm2.When the exposure intensity was 20 mW/cm2,the flexural strength reached a maximum of(132.39±8.92)MPa,and the difference was statistically significant(P<0.05).The flexural results of different exposure times showed that the flexural strength could reach(131.73±9.43)MPa when the single-layer exposure time was 3.0 s,and there was no significant difference when the exposure time was further increased.The flexural results of different post-curing times showed that when the post-curing time reached 30 min,there was no significant relationship between the flexural strength value and the increase in post-curing time.Regarding the influence of different layer thicknesses on the flexural performance,the test results showed that when the layer thickness was 50 μm,the result was the best,and the difference was statistically significant(P<0.001).Conclusion·Based on viscosity and rheological tests,a DLP-printable crown and bridge resin slurry was successfully developed.The optimal printing parameters were determined through statistical analysis of flexural strength:exposure intensity of 20 mW/cm2,exposure time of 3.0 s,post-curing time of 30 min,and a layer thickness of 50 μm.

Objective To compare and analyze the early- to mid-term outcomes of transcatheter aortic valve replacement (TAVR) combined with percutaneous coronary intervention (PCI) versus surgical aortic valve replacement (SAVR) combined with coronary artery bypass grafting (CABG) for the treatment of significant aortic stenosis (AS) and coronary artery disease (CAD). Methods The data of patients with significant AS and CAD who underwent surgical treatment at Central China Fuwai Hospital of Zhengzhou University from January 2018 to July 2023 were collected. These patients were divided into a TAVR+PCI group and a SAVR+CABG group according to the operation method. Propensity score matching (PSM) was used to select patients with close clinical baseline characteristics, and the early- to mid-term outcomes of the two groups were compared. Results A total of 272 patients were enrolled, including 208 males and 64 females, with a mean age of (64.16±8.24) years. There were 47 patients in the TAVR+PCI group and 225 patients in the SAVR+CABG group. After 1 : 1 PSM, 32 pairs were selected. There was no statistical difference in baseline data between the two groups (P>0.05). Compared with the SAVR+CABG group, the TAVR+PCI group had significantly shorter operative time, mechanical ventilation time, ICU stay, postoperative hospital stay, and less intraoperative bleeding, and significantly lower postoperative transfusion and complete revascularization rates (P<0.05). The differences in the rates of postoperative in-hospital death, myocardial infarction, stroke, or other complications between the two groups were not statistically significant (P>0.05), and the differences in the rates of moderate-to-severe perivalvular leakage, death, or readmission in the mid-term follow-up were not statistically significant (P>0.05). Conclusion In patients with significant AS and CAD, the early- and mid-term rates of death and complications are similar between those treated with TAVR+PCI and SAVR+CABG, and TAVR+PCI is a safe alternative to SAVR+CABG.

Avian coccidiosis, an acute parasitic disease that mainly harms chicks, is widely prevalent across the world, which poses a serious threat to poultry industry. Because of the single prophylactic formulations, veterinary clinical treatment of coccidiosis mainly relies on chemically synthesized agents, polyether ionophores and Chinese herbal medicines. The introduction of novel anticoccidial drugs is slow for a long period of time, and there is an increasing problem of anticoccidial drug resistance following long-term use, which has become an urgent problem to be solved in poultry industry. This review summarizes the levels of anticoccidial drug resistance across China from 2018 to 2023, and analyzes the resistance to various anticoccidial agents in coccidia. It is indicated that the overall prevalence of anticoccidial drug resistance is high in coccidia, and development of novel anticoccidial agents and products with reduced antibiotics use and alternatives of antibiotics is of an urgent need.

Objective To investigate the relationship between type 2 diabetes mellitus(T2DM)and cognitive decline.Methods Data were obtained from the cognitive impairment cohort of middle-aged and elderly population in rural areas of Xi'an City.The cohort consisted of residents aged 40 years and older in two villages of Huyi District,Xi'an.The baseline survey was completed between October 2014 and March 2015,with two follow-up visits in 2016 and 2018.The present study was conducted on cognitively normal people at baseline.Individual characteristics,lifestyle,and medical history were collected;physical and biochemical examinations were completed.According to medical history of T2DM and fasting blood glucose,the study population was divided into non-T2DM group,pre-existing T2DM group,and new-onset T2DM group.The Mini-Mental State Examination(MMSE)was used to assess global cognitive function.Participants with a drop of≥2 points in MMSE score from baseline after 4 years were defined as having cognitive decline.Chi-square test and multivariate Logistic regression analysis were employed to analyze the effect of T2DM status on the risk of cognitive decline.Results A total of 1 350 subjects completed the follow-up.In the follow-up population,1 096(81.2％)were free of T2DM,158(11.7％)already had T2DM at baseline,and 96(7.1％)developed new-onset T2DM during the follow-up.Cognitive decline was observed in 230 individuals after 4 years,representing 17.0％of the study population.The new-onset T2DM group had the highest 4-year incidence of cognitive decline(non-T2DM group vs.pre-existing T2DM group vs.new-onset T2DM group:15.7％vs.20.9％vs.26.0％,P=0.014),and the incidence of cognitive decline in the newly-onset T2DM group was significantly higher than that in the non-T2DM group(P=0.009).Multivariate Logistic regression analysis showed that the new-onset T2DM group had an increased risk of cognitive decline compared with the non-T2DM group within 4 years(OR=1.726,95％CI:1.029-2.896,P=0.039).However,no significant difference in 4-year risk of cognitive decline in the pre-existing T2DM group was observed(OR=1.402,95％CI:0.890-2.210,P=0.145).Conclusion Through the 4-year follow-up study of cognitively normal adults aged 40 and above in rural Xi'an,it was found that new-onset T2DM patients face a significantly elevated risk of cognitive decline,suggesting that cognitive decline may occur in the early stage of T2DM.

Objective·To fabricate a 3D-printed dental crown and bridge resin slurry using digital light processing(DLP)technology,investigate the influence of different printing parameters on its mechanical properties,determine the optimal printing parameters,and optimize the composition ratio of DLP-printed crown and bridge resin.Methods·Based on the viscosity characteristics of the mixture,the optimal ratio of urethane dimethacrylate(UDMA)to poly(propylene glycol)dimethacrylate(PPGDMA)was explored.After silanizing silicon dioxide(SiO2),it was mixed with UDMA,PPGDMA,and 2,4,6-trimethylbenzoyl bis(p-tolyl)phosphine oxide(TMO)to prepare DLP-printed dental crown and bridge resin slurries with different solid contents,and their rheological properties were tested.The Beer-Lambert equation was used to calculate the light penetration depth and critical exposure energy of the printing slurry.Based on these values,different exposure intensities,exposure times,post-curing times,and layer thicknesses were set respectively to carry out a series of printing experiments.By comparing and analyzing the flexural strength of the products under different printing parameters,the optimal printing parameter combination was screened out.Results·Viscosity tests showed that the optimal UDMA-to-PPGDMA ratio was 6∶4.The rheological behavior of printing slurries with different solid contents was tested,and the results showed that the DLP-printed dental crown and bridge resin with a solid content of 22%exhibited the best printing performance.According to the Beer-Lambert analysis,the light penetration depth Dp of the printing slurry was 119.79 μm,and the critical exposure energy Ec was 25.54 mJ/cm2.When the exposure intensity was 20 mW/cm2,the flexural strength reached a maximum of(132.39±8.92)MPa,and the difference was statistically significant(P<0.05).The flexural results of different exposure times showed that the flexural strength could reach(131.73±9.43)MPa when the single-layer exposure time was 3.0 s,and there was no significant difference when the exposure time was further increased.The flexural results of different post-curing times showed that when the post-curing time reached 30 min,there was no significant relationship between the flexural strength value and the increase in post-curing time.Regarding the influence of different layer thicknesses on the flexural performance,the test results showed that when the layer thickness was 50 μm,the result was the best,and the difference was statistically significant(P<0.001).Conclusion·Based on viscosity and rheological tests,a DLP-printable crown and bridge resin slurry was successfully developed.The optimal printing parameters were determined through statistical analysis of flexural strength:exposure intensity of 20 mW/cm2,exposure time of 3.0 s,post-curing time of 30 min,and a layer thickness of 50 μm.

OBJECTIVE To investigate and analyze the current situation and problems of the advanced personnel en-gaging in the hospital-acquired infection control during their training period and explore the existing countermeas-ures and future development.METHODS The literatures regarding to the advanced study in China were retrieved from databases,the subjects of the literatures covered infection control-related advanced study practice,discipline construction,position competence,talent cultivation,scientific research innovation,professional title evaluation,laws,regulations and development plans.From Aug.2024 to Nov.2024,a questionnaire survey and face-to-face interviews were conducted among 36 advanced study personnel from 9 provinces of China who engaged in hos-pital-acquired infection control in the First Medical Center of Chinese PLA General Hospital.Eventually,36 ques-tionnaires were retrieved,all of which were valid with a questionnaire recovery rate of 100.00％.RESULTS Among the 36 advanced study personnel of hospital-acquired infection control,58.33％were medium-grade professional ti-tle;preventive medicine(41.67％),clinical medicine(25.00％)and nursing(16.67％)ranked the top 3 majors.The personnel engaged in the infection control for more than 6 years,and the duration of the advanced study was generally 3 or 6 months.In reality,the personnel faced the choices in terms of the purposes of further education,learning approaches and learning contents.The advanced study personnel also encountered the problems of challenges from promotion,improvement of position competency,integration with clinical training,supervision and practice,as well as physiological,psychological and family pressure.CONCLUSION Aiming at the problems that the advanced study personnel are generally concerned about,such as how to scientifically and effectively carry out hospital-acquired infection control advanced study and preset and solve the problems that may encounter,it is necessary to formulate targeted training programmes so as to provide bases and enlightenment for establishment of a long-term mechanism for advanced study of infection control in China.

OBJECTIVE To investigate and analyze the current situation and problems of the advanced personnel en-gaging in the hospital-acquired infection control during their training period and explore the existing countermeas-ures and future development.METHODS The literatures regarding to the advanced study in China were retrieved from databases,the subjects of the literatures covered infection control-related advanced study practice,discipline construction,position competence,talent cultivation,scientific research innovation,professional title evaluation,laws,regulations and development plans.From Aug.2024 to Nov.2024,a questionnaire survey and face-to-face interviews were conducted among 36 advanced study personnel from 9 provinces of China who engaged in hos-pital-acquired infection control in the First Medical Center of Chinese PLA General Hospital.Eventually,36 ques-tionnaires were retrieved,all of which were valid with a questionnaire recovery rate of 100.00％.RESULTS Among the 36 advanced study personnel of hospital-acquired infection control,58.33％were medium-grade professional ti-tle;preventive medicine(41.67％),clinical medicine(25.00％)and nursing(16.67％)ranked the top 3 majors.The personnel engaged in the infection control for more than 6 years,and the duration of the advanced study was generally 3 or 6 months.In reality,the personnel faced the choices in terms of the purposes of further education,learning approaches and learning contents.The advanced study personnel also encountered the problems of challenges from promotion,improvement of position competency,integration with clinical training,supervision and practice,as well as physiological,psychological and family pressure.CONCLUSION Aiming at the problems that the advanced study personnel are generally concerned about,such as how to scientifically and effectively carry out hospital-acquired infection control advanced study and preset and solve the problems that may encounter,it is necessary to formulate targeted training programmes so as to provide bases and enlightenment for establishment of a long-term mechanism for advanced study of infection control in China.

Objective To investigate the relationship between type 2 diabetes mellitus(T2DM)and cognitive decline.Methods Data were obtained from the cognitive impairment cohort of middle-aged and elderly population in rural areas of Xi'an City.The cohort consisted of residents aged 40 years and older in two villages of Huyi District,Xi'an.The baseline survey was completed between October 2014 and March 2015,with two follow-up visits in 2016 and 2018.The present study was conducted on cognitively normal people at baseline.Individual characteristics,lifestyle,and medical history were collected;physical and biochemical examinations were completed.According to medical history of T2DM and fasting blood glucose,the study population was divided into non-T2DM group,pre-existing T2DM group,and new-onset T2DM group.The Mini-Mental State Examination(MMSE)was used to assess global cognitive function.Participants with a drop of≥2 points in MMSE score from baseline after 4 years were defined as having cognitive decline.Chi-square test and multivariate Logistic regression analysis were employed to analyze the effect of T2DM status on the risk of cognitive decline.Results A total of 1 350 subjects completed the follow-up.In the follow-up population,1 096(81.2％)were free of T2DM,158(11.7％)already had T2DM at baseline,and 96(7.1％)developed new-onset T2DM during the follow-up.Cognitive decline was observed in 230 individuals after 4 years,representing 17.0％of the study population.The new-onset T2DM group had the highest 4-year incidence of cognitive decline(non-T2DM group vs.pre-existing T2DM group vs.new-onset T2DM group:15.7％vs.20.9％vs.26.0％,P=0.014),and the incidence of cognitive decline in the newly-onset T2DM group was significantly higher than that in the non-T2DM group(P=0.009).Multivariate Logistic regression analysis showed that the new-onset T2DM group had an increased risk of cognitive decline compared with the non-T2DM group within 4 years(OR=1.726,95％CI:1.029-2.896,P=0.039).However,no significant difference in 4-year risk of cognitive decline in the pre-existing T2DM group was observed(OR=1.402,95％CI:0.890-2.210,P=0.145).Conclusion Through the 4-year follow-up study of cognitively normal adults aged 40 and above in rural Xi'an,it was found that new-onset T2DM patients face a significantly elevated risk of cognitive decline,suggesting that cognitive decline may occur in the early stage of T2DM.

Objectives:To investigate the safety and efficacy of concomitant mitral valvuloplasty(MVP)and implantation of domestic third-generation magnetically levitated Corheart 6 left ventricular assist device(LVAD). Methods:Clinical data of 13 end-stage heart failure patients who underwent Corheart 6 LVAD implantation and MVP at Central China Fuwai Hospital of Zhengzhou University from October 2021 to March 2023 were retrospectively analyzed.Mortality and complication events during hospitalization and at follow-up were collected,and changes in myocardial injury biomarkers,renal function,hemodynamics,and echocardiographic indices were observed. Results:There were no perioperative deaths and no MVP-related complications in these patients.During a mean follow-up of(14.2±5.6)months,2 patients died due to COVID-19 pneumonia and cardiac arrest respectively,11 cases(84.6%)survived.There were no recurrences of moderate-to-severe mitral regurgitation in the survived patients.Compared with preoperative value,higher cardiac output,lower central venous pressure,pulmonary artery systolic pressure(PASP),and mean pulmonary artery pressure(PAMP)were evidenced at 24 h and 72 h postoperatively,estimated glomerular filtration rate was also reduced at 1 week post operation(all P<0.010).High-sensitive troponin T level was significantly increased at 1 week post operation and then reduced at 1 month post operation,but still not returned to pre-operative level([125.5±281.9]pg/ml at baseline,[1 295.6±654.6]pg/ml at 1 week post operation and[278.0±300.5]pg/ml at 1 month post operation).Echocardiography showed that compared with preoperative period,the left ventricular ejection fraction tended to be higher at 1 and 6 months postoperatively(both P>0.017),whereas left ventricular end-diastolic dimension,PASP,and PAMP were significantly reduced(all P<0.010). Conclusions:Domestic third-generation magnetically levitated Corheart 6 LVAD implantation with concomitant MVP is safe and feasible,there is no recurrence of moderate-to-severe mitral regurgitation,a significant reduction in pulmonary artery pressure,and significant hemodynamic improvement in early to mid-term postoperatively are observed in survived patients.