ObjectiveTo investigate the association between noninvasive liver fibrosis markers and carotid plaque （CP） in patients with lean metabolic dysfunction-associated fatty liver disease （MAFLD）， and to provide a basis for screening high-risk populations. MethodsA total of 957 patients with lean MAFLD who underwent physical examination in Subei People’s Hospital from January 2021 to June 2023 was enrolled as the observation cohort， with the presence or absence of CP as the outcome， and fibrosis-4 （FIB-4） index and nonalcoholic fatty liver disease fibrosis score （NFS） were used to assess liver fibrosis degree. The independent-samples t test was used for comparison of normally distributed continuous data between two groups， and the Mann-Whitney U test was used for comparison of non-normally distributed continuous data between two groups； the chi-square test was used for comparison of categorical data between two groups. The multivariate logistic regression analysis， the restricted cubic spline analysis， the receiver operating characteristic curve， and the mediation effect analysis were used to investigate the association between liver fibrosis degree and CP. ResultsThe prevalence rate of CP was 36.6% in the lean MAFLD population. Compared with the non-CP group（n=607）， the CP group （n=350） had a significantly higher proportion of male patients， a significantly higher proportion of patients with smoking/diabetes/hypertension， and significantly higher levels of age， creatinine， blood urea nitrogen， triglycerides， fasting blood glucose， aspartate aminotransferase， aspartate aminotransferase/alanine aminotransferase ratio， NFS， and FIB-4 index， as well as significantly lower levels of platelet count and albumin （all P<0.05）. The multivariate logistic regression analysis showed that after adjustment for confounding factors， FIB-4 index （odds ratio［OR］=2.979， 95% confidence interval［CI］：2.141 — 4.219， P<0.001） and NFS （OR=1.747， 95%CI： 1.499 — 2.046， P<0.001） were positively correlated with CP. Both FIB-4 index and NFS had a good value in predicting CP. Hypertension had a significant indirect effect on the prevalence rate of CP through its impact on liver fibrosis markers， and its mediating effect accounted for 39.5% — 40.8% of the total effect （P<0.001）. ConclusionIn patients with lean MAFLD， NFS and FIB-4 index are significantly positively correlated with the prevalence rate of CP， and they can be used as potential epidemiological predictive indicators. Liver fibrosis markers may play a mediating role in the association between hypertension and CP. Interventions targeting hypertension and liver fibrosis markers may help to prevent and delay the progression of CP.

ObjectiveTo investigate the association of liver fibrosis scores and inflammation markers with gallstones in patients with metabolic dysfunction-associated fatty liver disease （MAFLD）， as well as the mediating role of liver fibrosis scores in the relationship between inflammation markers and gallstones. MethodsA total of 14 567 patients who received physical examination and were diagnosed with MAFLD in Subei People’s Hospital from January 2014 to June 2023 were enrolled in this study， and according to the results of abdominal color Doppler ultrasound， they were divided into gallstone group with 1 724 patients and non-gallstone group with 12 843 patients. Related clinical data were collected from all patients， including demographic data， medical history， family history， physical examination， Color Doppler ultrasound， and biochemical parameters. The biomarkers associated with metabolic disorders and insulin resistance included triglyceride-glucose index （TyG）， TyG-body mass index （BMI） index， atherogenic index of plasma （AIP）， and non-high-density lipoprotein cholesterol-to-high-density lipoprotein cholesterol ratio （NHHR）； the biomarkers associated with inflammation and nutritional status included neutrophil-to-lymphocyte ratio （NLR）， neutrophil percentage-to-albumin ratio （NPAR）， and monocyte-to-lymphocyte ratio （MLR）； the biomarkers for assessing liver fibrosis degree and liver function included albumin-bilirubin （ALBI） score， NAFLD fibrosis score （NFS）， fibrosis-4 （FIB-4） index， and aspartate aminotransferase-to-platelet ratio index （APRI）. The independent-samples t test was used for comparison of normally distributed continuous data between two groups， while the Mann-Whitney U test was used for comparison of non-normally distributed continuous data between two groups； the chi-square test was used for comparison of categorical data between two groups. Multivariate Logistic regression analysis， restricted cubic spline analysis， and mediating effect analysis were used to assess the association of liver fibrosis markers and inflammation markers with the risk of gallstones. ResultsThe prevalence rate of gallstones was 11.8% among the MAFLD patients. There were significant differences between the gallstone group and the non-gallstone group in sex， age， smoking history， diabetes， hypertension， lymphocytes， platelets， glucose， albumin， serum uric acid， alanine aminotransferase， aspartate aminotransferase， red blood cell， NLR， NPAR， MLR， NFS， FIB-4 index， and ALBI score （all P<0.05）. The multivariate Logistic regression analysis showed that NLR （odds ratio ［OR］=1.091， 95% confidence interval ［CI］： 1.028　—　1.160， P<0.05）， NPAR （OR=1.073， 95%CI： 1.042　—　1.105， P<0.05）， MLR （OR=1.142， 95%CI： 1.057　—　1.232， P<0.05）， NFS （OR=1.239， 95%CI： 1.190　—　1.291， P<0.05）， and FIB-4 index （OR=1.326， 95%CI： 1.241　—　1.417， P<0.05） were influencing factors for the prevalence rate of gallstones. The restricted cubic spline analysis showed a significant non-linear association between NFS/FIB-4 index and the risk of gallstone （non-linear P<0.05）. The mediating effect analysis further showed that the association of NLR， MLR， and NPAR with gallstones was partially mediated by NFS or FIB-4 index， with a mediating effect accounting for 36.79%、28.09%、29.67% and 18.31%、17.70、11.57%， respectively. ConclusionNFS and FIB-4 index have a non-linear association with the prevalence rate of gallstones in MAFLD patients， and they also mediate the association of NLR， NPAR， and MLR with the risk of gallstone.

Objective: To explore the feasibility, precision, and clinical value of a personalized primary repair approach centered on digital design, integrating 3D printing technology with multiple materials such as titanium mesh, polyetheretherketone (PEEK), and titanium plates, for complex craniofacial bone defects involving the skull, mandible, orbit, and zygoma resulting from traffic accidents, providing a reference for primary repair of clinically complex craniofacial bone defects. Methods: One patient who was admitted in September 2021 with multiple comminuted fractures of the right craniomaxillofacial region and large-area bone defects caused by a traffic accident was selected. Digital design was integrated throughout the entire repair process. First, preoperative computed tomography (CT) data were used for 3D reconstruction of the craniomaxillofacial region; then, based on the model, the anatomical contour of the healthy left side was reproduced via mirroring technology for the defects on the right side. A targeted repair plan was designed: 3D-printed PEEK material was used to reconstruct the right orbital floor and zygomaticomaxillary complex, a 0.6-mm-thick titanium mesh was adopted to repair the right skull defect, and a 2.0-mm-thick titanium plate was applied for rigid internal fixation of the mandibular fracture. A one-stage repair surgery was completed simultaneously. In addition, a literature review was conducted on studies related to the repair of complex combined craniomaxillofacial defects. Results: CT examination at 1 week postoperatively showed that the average fitting gap of the implants was 0.3 mm, and the symmetry difference of the facial contour was less than 5 mm. At 3 months postoperatively, the patient’s maximum mouth opening reached 38 mm, the occlusal relationship returned to normal, and the diplopia symptom completely disappeared. During the 6-month postoperative follow-up, no complications such as implant loosening, infection, or displacement occurred; the FACE-Q scale score was 91, indicating a high level of subjective patient satisfaction. The literature review indicated that digital design combined with 3D printing technology can significantly improve the accuracy of complex craniomaxillofacial bone defect reconstruction. PEEK material is suitable for the reconstruction of the orbital floor and zygomaticomaxillary complex. Titanium mesh and plates can ensure the stability of the reconstruction. Multi-materials combined reconstruction represents an important therapeutic strategy for such defects. Conclusion The individualized one-stage repair scheme, centered on digital design and combined with 3D printing technology and multi-materials (titanium mesh, PEEK, and titanium plates), can achieve precise anatomical reduction and simultaneous functional recovery for complex combined craniomaxillofacial bone defects caused by traffic accidents.

ObjectiveTo compare the clinical efficacy of traditional Chinese medicine （TCM） manipulative reduction combined with small splint fixation versus surgical treatment for type A distal radius fracture （DRF） and to explore the factors influencing the choice of treatment. MethodsA multi-center retrospective study was conducted， collecting data from 1237 type A DRF patients treated in 11 hospitals in Jiangsu province from September， 2023 to April， 2025. Among them， 851 patients in the TCM group received manipulative reduction combined with small splint fixation， and 386 patients in the surgical group underwent open reduction and internal fixation. Visual analog scale （VAS） scores for pain and radiographic indicators including palmar tilt， ulnar deviation， and radial height were compared before treatment， 5-7 days after treatment， and 4-6 weeks after treatment. The wrist joint function scores including Dienst and Gartland-Werley scores at 12 weeks after treatment were recorded. Subgroup analysis was conducted for the excellent rate of Dienst and Gartland-Werley scores， stratified by age （＜50， 50-59， 60-69， ≥70 years old） and AO subtypes （A1， A2， A3）. A multivariate logistic regression model was used to identify independent factors influencing treatment choice. ResultsOn 5-7 days after treatment， the surgical group had lower VAS scores than the TCM group， while 4-6 weeks after treatment， the TCM group showed lower VAS scores than the surgical group （P＜0.01）. In terms of radiographic indicators， except for the palmar tilt before treatment being higher in the surgical group than in the TCM group （P＜0.01）， there were no significant differences in palmar tilt， ulnar deviation， and radial height at other timepoints （P＞0.05）. Twelve weeks after treatment， the surgical group had a higher average Gartland-Werley score and the excellent rate than the TCM group （P＜0.01）. Subgroup analysis showed that in patients with A2 type DRF aged 50-59 and 60-69 years old， the excellent rates of Dienst and Gartland-Werley scores in the TCM group were higher than those in the surgical group （P＜0.05）. Multivariate logistic regression analysis revealed that age， palmar tilt， ulnar deviation， and the degree of swelling on the affected side were independent factors influencing the choice of treatment （P＜0.05）. ConclusionBoth TCM manipulative reduction combined with small splint fixation and surgical treatment for type A DRF can achieve good therapeutic effects. TCM manipulative reduction combined with small splint fixation has certain advantages in medium- and long-term pain relief， especially in elderly patients， where wrist joint function recovery is more stable. Age， palmar tilt， ulnar deviation， and swelling degree are the main factors influencing the treatment choice.

Detection of poor-water-soluble substances typically requires an organic solvent containing solution,and therefore,the biosensors that can operate in such conditions are highly promising for practical applications.However,most existing biosensors have been developed in aqueous solution and it is hard to work effectively in organic solvent systems.In this work,we uncovered that the G-quadruplex(G4)/hemin DNAzyme(G4HD)could be strongly reactivated by NH4 in organic solvents at concentration up to 30％,and the activity was significantly higher than that in aqueous solutions containing K+.Based on this discovery,a biosensing system was developed for small molecule in 40％methanol by coupling G4HD with our previously identified RNA-cleaving DNAzyme(E3).This system comprised an ATP-activated aptazyme that was made of E3 and a G4HD that was activated by the cleavage product of the aptazyme.By using a manmade pipette tip filter to separate the reaction products,the subsequent colorimetric reaction of the G4HD could be triggered.This biosensing system enabled the visualization of target molecules in organic cosolvents without any other instruments.The activable DNAzyme-cascade sensing system had potential in point-of-care detection of poor-water-soluble pollutants,thereby enhancing the practical values of functional nucleic acid-based biosensors in real-world detection conditions.

Under the background of forensic medicine becoming a first-level discipline,the opportuni-ties and challenges of discipline development coexist.Starting from the actual situation and characteris-tics of local medical colleges and universities,this paper discusses the problems and solutions for the development of forensic medicine discipline from the perspective of building a regional high-level medical university.Combined with the experiences of carrying out forensic medicine education in our college,this paper supplies our thoughts and practices on improving the discipline system,enhancing the ability to serve society,perfecting the talent cultivation model and promoting forensic culture,to provide reference and inspiration for the development of forensic medicine in other universities,jointly promote the advancement of forensic medicine in China to a new stage,and contribute the wisdom and strength of forensic medical experts to the construction of a law-based China,a safe China and a healthy China.

In the context of medical insurance payment reform,the sample hospital has implemented performance management optimization to effectively address the challenges posed by diagnosis-intervention packet(DIP)payment.Reform measures focused on disease quality,rational diagnosis and treatment,operational management,medical technological value,and policy orientation,and they have significantly optimized service ability and performance evaluation indexes of the hospital.Main achievements included a reduction in the cost consumption index and an increase in the clinical performance index,with the overall DIP payment rate increasing from 88.86%to 103.23%and a marked improvement in operational management.The quality control and operational efficiency of the hospital have been effectively enhanced by choosing proper DIP payment evaluation indexes and improving performance management,and provided strong support for the high-quality development of the hospital.

Naval hospitals,the backbone of naval health service system,are the key to build a world-class naval health service system.On the basis of the requirements of military transformation and high-quality development of public hospitals,this paper summarized five aspects of high-quality development of naval hospitals,including directions and regulations,support and contribution of combats,efficiency,sustainable development momentum,and the expansion of service functions.It is very important to strengthen the top-level design and policy support for naval hospitals,to improve the level of governance and innovation,and to find the right target for the naval hospital construction in naval health service system reform.

As space stations steadily progress into the application and development stage,astronauts will be regularly rotated for space missions,and the impact of the space environment on human health will become an important research topic.Under microgravity,astronauts lose 1%～2%bone mass per month.Astronauts'health phenotype,as well as animal experiments conducted in space,have shown that microgravity leads to significant loss of weight-bearing bone and reduction of ultimate loading in bones.Due to the limited conditions,it is not easy to conduct experiments in space,so various animal models have been used for simulated microgravity experiments to study the mechanisms of bone loss.This review summarizes many studies on osteoporosis under space microgravity and simulated microgravity on the ground,describing different types of bone loss and underlying molecular mechanisms caused by microgravity,as well as the similarities and differences of current conclusions.In addition,this review summarizes the effects of non-bone tissues such as muscles on bone loss under microgravity,and the current measures adopted in the space station to prevent osteoporosis.