Debates persist regarding the efficacy and safety of azvudine, particularly its real-world outcomes. This study involved patients aged ≥60 years who were admitted to 25 hospitals in mainland China with confirmed SARS-CoV-2 infection between December 1, 2022, and February 28, 2023. Efficacy outcomes were all-cause mortality during hospitalization, the proportion of patients discharged with recovery, time to nucleic acid-negative conversion (T _NANC), time to symptom improvement (T _SI), and time of hospital stay (T _HS). Safety was also assessed. Among the 5884 participants identified, 1999 received azvudine, and 1999 matched controls were included after exclusion and propensity score matching. Azvudine recipients exhibited lower all-cause mortality compared with controls in the overall population (13.3% vs. 17.1%, RR, 0.78; 95% CI, 0.67-0.90; P = 0.001) and in the severe subgroup (25.7% vs. 33.7%; RR, 0.76; 95% CI, 0.66-0.88; P < 0.001). A higher proportion of patients discharged with recovery, and a shorter T _NANC were associated with azvudine recipients, especially in the severe subgroup. The incidence of adverse events in azvudine recipients was comparable to that in the control group (2.3% vs. 1.7%, P = 0.170). In conclusion, azvudine showed efficacy and safety in older patients hospitalized with COVID-19 during the SARS-CoV-2 omicron wave in China.

ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.

ObjectiveBased on the concept of quality by design（QbD）， the processing process of calcined Pyritum was optimized， and its X-ray diffraction（XRD） fingerprint was established. MethodsThe safety， effectiveness and quality controllability of calcined Pyritum were taken as the quality profile（QTPP）， the color， hardness， metallic luster， phase composition， the contents of heavy metals and hazardous elements were taken as the critical quality attributes（CQAs）， and the calcination temperature， calcination time， paving thickness and particle size were determined as the critical process parameters（CPPs）. Differential thermal analysis， X-ray diffraction（XRD） and inductively coupled plasma mass spectrometry（ICP-MS） were used to analyze the correlation between the calcination temperature and CQAs of calcined Pyritum. Then， based on the criteria importance through intercriteria correlation（CRITIC）-entropy weight method， the optimal processing process of calcined Pyritum was optimized by orthogonal test. Powder XRD was used to analyze the phase of calcined Pyritum samples processed according to the best process， and the mean and median maps of calcined Pyritum were established by the superposition of geometric topological figures， and similarity evaluation and cluster analysis were carried out. ResultsThe results of single factor experiments showed that the physical phase of Pyritum changed from FeS₂ to Fe₇S₈ during the process of temperature increase， the color gradually deepened from dark yellow， and the contents of heavy metals and harmful elements decreased. The optimized processing process of calcined Pyritum was as follows：calcination temperature at 750 ℃， calcination time of 2.5 h， paving thickness of 3 cm， particle size of 0.8-1.2 cm， vinegar quenching 1 time［Pyritum-vinegar（10∶3）］. After calcination， the internal structure of Pyritum was honeycomb-shaped， which was conducive to the dissolution of active ingredients. XRD fingerprints of 13 batches of calcined Pyritum characterized by 10 common peaks were established. The similarities of the relative peak intensities of the XRD fingerprints of the analyzed samples were>0.96， and it could effectively distinguish the raw products and unqualified products. ConclusionTemperature is the main factor affecting the quality of calcined Pyritum. After processing， the dissolution of the effective components in Pyritum increases， and the contents of heavy metals and harmful substances decrease， reflecting the function of processing to increase efficiency and reduce toxicity. The optimized processing process is stable and feasible， and the established XRD fingerprint can be used as one of the quality control standards of calcined Pyritum.

ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.

ObjectiveBased on the concept of quality by design（QbD）， the processing process of calcined Pyritum was optimized， and its X-ray diffraction（XRD） fingerprint was established. MethodsThe safety， effectiveness and quality controllability of calcined Pyritum were taken as the quality profile（QTPP）， the color， hardness， metallic luster， phase composition， the contents of heavy metals and hazardous elements were taken as the critical quality attributes（CQAs）， and the calcination temperature， calcination time， paving thickness and particle size were determined as the critical process parameters（CPPs）. Differential thermal analysis， X-ray diffraction（XRD） and inductively coupled plasma mass spectrometry（ICP-MS） were used to analyze the correlation between the calcination temperature and CQAs of calcined Pyritum. Then， based on the criteria importance through intercriteria correlation（CRITIC）-entropy weight method， the optimal processing process of calcined Pyritum was optimized by orthogonal test. Powder XRD was used to analyze the phase of calcined Pyritum samples processed according to the best process， and the mean and median maps of calcined Pyritum were established by the superposition of geometric topological figures， and similarity evaluation and cluster analysis were carried out. ResultsThe results of single factor experiments showed that the physical phase of Pyritum changed from FeS₂ to Fe₇S₈ during the process of temperature increase， the color gradually deepened from dark yellow， and the contents of heavy metals and harmful elements decreased. The optimized processing process of calcined Pyritum was as follows：calcination temperature at 750 ℃， calcination time of 2.5 h， paving thickness of 3 cm， particle size of 0.8-1.2 cm， vinegar quenching 1 time［Pyritum-vinegar（10∶3）］. After calcination， the internal structure of Pyritum was honeycomb-shaped， which was conducive to the dissolution of active ingredients. XRD fingerprints of 13 batches of calcined Pyritum characterized by 10 common peaks were established. The similarities of the relative peak intensities of the XRD fingerprints of the analyzed samples were>0.96， and it could effectively distinguish the raw products and unqualified products. ConclusionTemperature is the main factor affecting the quality of calcined Pyritum. After processing， the dissolution of the effective components in Pyritum increases， and the contents of heavy metals and harmful substances decrease， reflecting the function of processing to increase efficiency and reduce toxicity. The optimized processing process is stable and feasible， and the established XRD fingerprint can be used as one of the quality control standards of calcined Pyritum.

BACKGROUND: The optimal antidepressant dosages remain controversial. This study aimed to analyze the efficacy of antidepressants and characterize their dose-response relationships in the treatments of major depressive disorders (MDD). METHODS: We searched multiple databases, including the Embase, Cochrane Central Register of Controlled Trials, PubMed, and Web of Science, for the studies that were conducted between January 8, 2016, and April 30, 2023. The studies are double-blinded, randomized controlled trials (RCTs) involving the adults (≥18 years) with MDD. The primary outcomes were efficacy of antidepressant and the dose-response relationships. A frequentist network meta-analysis was conducted, treating participants with various dosages of the same antidepressant as a single therapy. We also implemented the model-based meta-analysis (MBMA) using a Bayesian method to explore the dose-response relationships. RESULTS: The network meta-analysis comprised 135,180 participants from 602 studies. All the antidepressants were more effective than the placebo; toludesvenlafaxine had the highest odds ratio (OR) of 4.52 (95% confidence interval [CI]: 2.65-7.72), and reboxetine had the lowest OR of 1.34 (95%CI: 1.14-1.57). Moreover, amitriptyline, clomipramine, and reboxetine showed a linear increase in effect size from low to high doses. The effect size of toludesvenlafaxine increased significantly up to 80 mg/day and subsequently maintained the maximal dose up to 160 mg/day while the predictive curves of nefazodone were fairly flat in different dosages. CONCLUSIONS: Although most antidepressants were more efficacious than placebo in treating MDD, no consistent dose-response relationship between any antidepressants was observed. For most antidepressants, the maximum efficacy was achieved at lower or middle prescribed doses, rather than at the upper limit. REGISTRATION No. CRD42023427480; https://www.crd.york.ac.uk/prospero/display_record.php?
Humans ; Antidepressive Agents/therapeutic use* ; Depressive Disorder, Major/drug therapy* ; Dose-Response Relationship, Drug ; Randomized Controlled Trials as Topic

Objective To establish a rat model of ovarian endometriosis(EMS)using the horn reversion method,to provide an ideal animal model for exploring the pathogenesis and treatment of EMS.Methods Fifty SPF-grade female SD rats were divided randomly into five groups:a sham group,and 1,2,3,and 4 weeks after surgery groups,respectively(n=10 rats per group).Apart from the sham group,an ovarian-type EMS model was established in the other groups by the uterine horn refracture method,and the modeling success rate,and ectopic foci volume and mass were observed in each group.The morphology of ectopic foci was observed by hematoxylin-eosin(HE),and expression of proliferating cell nuclear antigen(PCNA),Ki67,epithelial cadherin(E-cadherin),and neural cadherin(N-cadherin)in the uterus and ectopic foci tissues were detected by immunohistochemistry.The model was further evaluated and the degree of cell proliferation and epithelial mesenchymal transformation at different times after modeling were analyzed.Results The modeling success rates in the 1,2,3,and 4 weeks after surgery groups were 80%,90%,100%,and 100%,respectively(P＞0.05).The volume and mass of the ectopic foci were significantly greater in the 3 and 4 weeks after surgery groups compared with the 1 and 2 weeks after surgery groups(P＜0.01).HE staining showed endometrial epithelial cells,mesenchymal cells and a few glands in the ectopic foci tissues.Immunohistochemical staining showed that expression levels of Ki67,PCNA,and N-cadherin in uterus tissues were significantly higher(P＜0.05,P＜0.01)in all the model groups compared with the sham group,while expression levels of E-cadherin were significantly lower(P＜0.05,P＜0.01).Expression levels of Ki67,PCNA,and N-cadherin in the uterus and ectopic foci tissues were significantly higher(P＜0.05,P＜0.01)in the 2,3,and 4 weeks after surgery groups compared with the 1 week after surgery group,while expression levels of E-cadherin were significantly lower(P＜0.05,P＜0.01).Conclusion The uterine horn reversion method can be used to establish an ovarian EMS model in rats.Ectopic lesions can be observed 1 week after surgery.The success rate of modeling increases with modeling time,stabilizing at 3 weeks postoperatively.Ki67,PCNA,and N-cadherin were significantly expressed in the uterus and ectopic foci tissues,and their expression levels increased with modeling time,while E-cadherin expression in the uterus and ectopic foci tissues decreased with modeling time.These results showed good modeling success of the EMS rat model,suggesting that it could be used as a stable EMS modeling method.

Objective To explore the traditional Chinese medicine(TCM)syndrome characteristics of patients with Chikungunya hemorrhagic fever and to provide empirical data to support the application of TCM in diagnosing and treating Chikungunya hemorrhagic fever.Methods A cross-sectional survey was conducted to collect clinical data(sex,age,days since onset,and comorbidity underlying disease conditions)and TCM with four-examination information(symptoms,tongue manifestations,and pulse manifestations)from 255 patients with Chikungunya hemorrhagic fever who visited Lecong Hospital of Shunde,Foshan,the Third People's Hospital of Shunde District of Foshan,Shunde Hospital of Southern Medical University Affiliated Chencun Hospital between July 23 and July 29,2025.Factor and cluster analyses were used to summarize TCM syndrome characteristics and analyze core pathogenesis in conjunction with clinical features.Results Among the 255 patients with Chikungunya hemorrhagic fever,131 were male and 124 were female,with a age of(49.05±17.93)years and a disease duration of(3.26±1.78)days.Among the four types of examination information in TCM,35 items exhibited a frequency exceeding 10%.The most prevalent symptoms were arthralgia(180 patients,70.59%),exanthem(153 patients,60.00%),fatigue(99 patients,38.82%),anhidrosis(98 patients,38.43%),pruritus(96 patients,37.65%),and fever(92 patients,36.08%).Tongue and pulse manifestations were primarily white fur(155 patients,60.78%),pink tongue(111 patients,43.53%),slippery pulse(143 patients,56.08%),and greasy fur(134 patients,52.53%).Patients with disease onset≤3 d had a higher incidence of arthralgia,fatigue,fever,aversion to cold,generalized muscle pain,aversion to wind,insomnia,headache,sweating,low-grade fever,poor appetite,loose stool,hyperhidrosis,and red tongue than those with disease onset≥4 d(P<0.05).Patients with disease onset≥4 d had a higher incidence of pink tongue and thick fur than those with disease onset≤3 d(P<0.05).The syndrome elements in patients with Chikungunya hemorrhagic fever predominantly manifested on the defensive exterior,with involvement of the sinew-bone joints,skin-muscle,and spleen.Pathogenic factors were primarily characterized by external winds,dampness,and heat.Factor and cluster analysis result indicated three TCM pathogenesis progression patterns:imbalance of the defensive exterior with wind-dampness conflict and heat transformation;dampness-heat flowing into muscles and meridians causing joint obstruction and qi blood stasis;and dampness-heat congelation resulting in qi mechanism obstruction,consumption of body fluids,and infiltration of the skin.Conclusion Patients with Chikungunya hemorrhagic fever primarily present with fever,joint pain,and rashes.In TCM,this condition falls under the category of"dampness-warmth"syndrome.Its etiology is attributed to pathogens,with transmission occurring through mosquito bites.The core pathogenesis of TCM is the invasion of the defensive exterior and dampness-toxic heat accumulation.The therapeutic principles focus on clearing heat pathogens,resolving dampness pathogens,dispersing wind pathogens,and promoting the resolution of rashes.

Objective To explore the traditional Chinese medicine(TCM)syndrome characteristics of patients with Chikungunya hemorrhagic fever and to provide empirical data to support the application of TCM in diagnosing and treating Chikungunya hemorrhagic fever.Methods A cross-sectional survey was conducted to collect clinical data(sex,age,days since onset,and comorbidity underlying disease conditions)and TCM with four-examination information(symptoms,tongue manifestations,and pulse manifestations)from 255 patients with Chikungunya hemorrhagic fever who visited Lecong Hospital of Shunde,Foshan,the Third People's Hospital of Shunde District of Foshan,Shunde Hospital of Southern Medical University Affiliated Chencun Hospital between July 23 and July 29,2025.Factor and cluster analyses were used to summarize TCM syndrome characteristics and analyze core pathogenesis in conjunction with clinical features.Results Among the 255 patients with Chikungunya hemorrhagic fever,131 were male and 124 were female,with a age of(49.05±17.93)years and a disease duration of(3.26±1.78)days.Among the four types of examination information in TCM,35 items exhibited a frequency exceeding 10%.The most prevalent symptoms were arthralgia(180 patients,70.59%),exanthem(153 patients,60.00%),fatigue(99 patients,38.82%),anhidrosis(98 patients,38.43%),pruritus(96 patients,37.65%),and fever(92 patients,36.08%).Tongue and pulse manifestations were primarily white fur(155 patients,60.78%),pink tongue(111 patients,43.53%),slippery pulse(143 patients,56.08%),and greasy fur(134 patients,52.53%).Patients with disease onset≤3 d had a higher incidence of arthralgia,fatigue,fever,aversion to cold,generalized muscle pain,aversion to wind,insomnia,headache,sweating,low-grade fever,poor appetite,loose stool,hyperhidrosis,and red tongue than those with disease onset≥4 d(P<0.05).Patients with disease onset≥4 d had a higher incidence of pink tongue and thick fur than those with disease onset≤3 d(P<0.05).The syndrome elements in patients with Chikungunya hemorrhagic fever predominantly manifested on the defensive exterior,with involvement of the sinew-bone joints,skin-muscle,and spleen.Pathogenic factors were primarily characterized by external winds,dampness,and heat.Factor and cluster analysis result indicated three TCM pathogenesis progression patterns:imbalance of the defensive exterior with wind-dampness conflict and heat transformation;dampness-heat flowing into muscles and meridians causing joint obstruction and qi blood stasis;and dampness-heat congelation resulting in qi mechanism obstruction,consumption of body fluids,and infiltration of the skin.Conclusion Patients with Chikungunya hemorrhagic fever primarily present with fever,joint pain,and rashes.In TCM,this condition falls under the category of"dampness-warmth"syndrome.Its etiology is attributed to pathogens,with transmission occurring through mosquito bites.The core pathogenesis of TCM is the invasion of the defensive exterior and dampness-toxic heat accumulation.The therapeutic principles focus on clearing heat pathogens,resolving dampness pathogens,dispersing wind pathogens,and promoting the resolution of rashes.

Objective To establish a rat model of ovarian endometriosis(EMS)using the horn reversion method,to provide an ideal animal model for exploring the pathogenesis and treatment of EMS.Methods Fifty SPF-grade female SD rats were divided randomly into five groups:a sham group,and 1,2,3,and 4 weeks after surgery groups,respectively(n=10 rats per group).Apart from the sham group,an ovarian-type EMS model was established in the other groups by the uterine horn refracture method,and the modeling success rate,and ectopic foci volume and mass were observed in each group.The morphology of ectopic foci was observed by hematoxylin-eosin(HE),and expression of proliferating cell nuclear antigen(PCNA),Ki67,epithelial cadherin(E-cadherin),and neural cadherin(N-cadherin)in the uterus and ectopic foci tissues were detected by immunohistochemistry.The model was further evaluated and the degree of cell proliferation and epithelial mesenchymal transformation at different times after modeling were analyzed.Results The modeling success rates in the 1,2,3,and 4 weeks after surgery groups were 80%,90%,100%,and 100%,respectively(P＞0.05).The volume and mass of the ectopic foci were significantly greater in the 3 and 4 weeks after surgery groups compared with the 1 and 2 weeks after surgery groups(P＜0.01).HE staining showed endometrial epithelial cells,mesenchymal cells and a few glands in the ectopic foci tissues.Immunohistochemical staining showed that expression levels of Ki67,PCNA,and N-cadherin in uterus tissues were significantly higher(P＜0.05,P＜0.01)in all the model groups compared with the sham group,while expression levels of E-cadherin were significantly lower(P＜0.05,P＜0.01).Expression levels of Ki67,PCNA,and N-cadherin in the uterus and ectopic foci tissues were significantly higher(P＜0.05,P＜0.01)in the 2,3,and 4 weeks after surgery groups compared with the 1 week after surgery group,while expression levels of E-cadherin were significantly lower(P＜0.05,P＜0.01).Conclusion The uterine horn reversion method can be used to establish an ovarian EMS model in rats.Ectopic lesions can be observed 1 week after surgery.The success rate of modeling increases with modeling time,stabilizing at 3 weeks postoperatively.Ki67,PCNA,and N-cadherin were significantly expressed in the uterus and ectopic foci tissues,and their expression levels increased with modeling time,while E-cadherin expression in the uterus and ectopic foci tissues decreased with modeling time.These results showed good modeling success of the EMS rat model,suggesting that it could be used as a stable EMS modeling method.