ObjectiveTo investigate the effects of Yishen Juanbi pills （YSJB）-containing bone marrow fluid on the migration and differentiation phenotypes of CD4⁺T lymphocytes based on the stromal cell-derived factor-1/chemokine receptor 4 （SDF-1/CXCR4） signaling pathway. MethodsPrimary CD4⁺T lymphocytes were isolated from mice using magnetic bead separation and identified for purity by flow cytometry. A CD4⁺T lymphocyte culture system was then established to observe the effects of SDF-1 on CD4⁺T-cell migration and differentiation. On this basis， the experimental groups included the Sham group， the ovariectomy （OVX） group， the Sham+collagen-induced arthritis （CIA） group， the OVX+CIA group， the Sham+CIA+YSJB group （2.16 g·kg^-1）， the OVX+CIA+YSJB group （2.16 g·kg^-1）， and the OVX+CIA+methotrexate （MTX） group （1.5 mg·kg^-1）. Bone marrow fluid from each group was prepared according to previous methods and added to the CD4⁺ T-cell culture system at 5% （v/v）. Transwell assays were used to examine CD4⁺T-cell migration in each group. Real-time PCR was used to measure the mRNA expression levels of interleukin （IL）-17， tumor necrosis factor-α （TNF-α）， retinoic-acid-related orphan receptor γt （RORγt）， IL-10， transforming growth factor-β （TGF-β）， forkhead box P3 （FoxP3）， CXCR4， phosphoinositide 3-kinase （PI3K）， and protein kinase B （Akt）. Western blot was used to detect the expression of helper T （Th）17/regulatory T （Treg） cell signature factors （RORγt， FoxP3）， CXCR4， PI3K， phosphorylated （p）-PI3K， Akt， and p-Akt. In a separate set of experiments， cells were divided into the Sham group， OVX+CIA group， OVX+CIA+CXCR4 antagonist AMD3100 group， and OVX+CIA+YSJB+AMD3100 group to observe changes in the above indicators following AMD3100 intervention. ResultsCompared with the Sham group， the number of migrated cells in the lower chamber was significantly increased in the Sham+CIA and OVX+CIA groups （P<0.05， P<0.01）. The mRNA expression of RORγt， IL-17， TNF-α， CXCR4， PI3K， and Akt was significantly upregulated， whereas FoxP3， IL-10， and TGF-β mRNA expression was significantly decreased （P<0.05， P<0.01）. Protein expression of RORγt， CXCR4， p-PI3K/PI3K， and p-Akt/Akt was significantly increased， while FoxP3 protein expression was markedly decreased （P<0.05， P<0.01）. Compared with the OVX+CIA group， the OVX+CIA+YSJB group and OVX+CIA+MTX group showed significantly reduced migration （P<0.05）， mRNA expression of RORγt， IL-17， TNF-α， CXCR4， PI3K， and Akt was also significantly decreased， while FoxP3， IL-10， and TGF-β mRNA expression was significantly increased （P<0.05， P<0.01）. RORγt protein expression was significantly downregulated， and FoxP3 protein expression markedly upregulated （P<0.05）. In the OVX+CIA+YSJB group， CXCR4， p-PI3K/PI3K， and p-Akt/Akt protein expression was significantly decreased （P<0.05）. Compared with the OVX+CIA group， RORγt， CXCR4， PI3K， and Akt mRNA expression in CD4⁺T cells was significantly decreased in the OVX+CIA+AMD3100 group and the OVX+CIA+YSJB+AMD3100 group， while FoxP3 mRNA and protein expression was significantly upregulated （P<0.05， P<0.01）. RORγt， CXCR4， p-PI3K/PI3K， and p-Akt/Akt protein expression was also markedly decreased （P<0.05， P<0.01）. Compared with the OVX+CIA+AMD3100 group， the OVX+CIA+YSJB+AMD3100 group showed significantly decreased RORγt and Akt mRNA expression （P<0.05） and significantly lower p-Akt/Akt protein expression （P<0.05）. ConclusionYSJB-containing bone marrow fluid suppresses CD4⁺T-cell migration and regulates Th17/Treg balance by downregulating Th17-associated signature factors and upregulating Treg-associated signature factors through inhibition of the SDF-1/CXCR4 signaling pathway and PI3K/Akt signaling pathway. The SDF-1/CXCR4 signaling pathway is one of the targets through which YSJB inhibits CD4⁺T-cell differentiation.

Objective To analyze the value of serum neutrophil count (NEUT), homocysteine (Hcy), adiponectin (APN) and blood glucose in predicting the occurrence of acute myocardial infarction (AMI) in patients with coronary heart disease. Methods The clinical data of 98 patients with coronary heart disease who were admitted to the hospital from March 2022 to March 2024 were collected retrospectively. Patients included were divided into AMI group (n=33) and non-AMI group (n=65) according to the presence and absence of AMI. Baseline data, complications, ultrasound examination data and laboratory examination data were collected. Multivariate logistic regression analysis was performed to identify the influencing factors of AMI in patients with coronary heart disease. The receiver operating characteristic curves were used to evaluate the predictive value of NEUT, Hcy, APN and blood glucose for AMI in patients with coronary heart disease. Results The levels of fasting plasma glucose (FPG), 2-hour postprandial plasma glucose (2hPG), glycosylated hemoglobin (HbA1c), NEUT, APN, Hcy, N-terminal pro B-type natriuretic peptide (NT-proBNP), C-reactive protein (CRP), red blood cell distribution width (RDW) and white blood cell (WBC) in the AMI group were higher than those in the non-AMI group (P<0.05). Logistic regression analysis found that FPG, 2hPG, HbA1c, NEUT, APN, Hcy, NT-proBNP, CRP, RDW, and WBC were independent influencing factors of AMI in patients with coronary heart disease (P<0.05). ROC curves indicated that the levels of FPG, 2hPG, HbA1c, NEUT, APN and Hcy were abnormally elevated in patients with coronary heart disease. Above indicators were helpful for predicting the occurrence of AMI. The area under the curve (AUC) and sensitivity of FPG for predicting AMI in patients with coronary heart disease were the best (P<0.05). Conclusion Abnormal elevated levels of FPG, 2hPG, HbA1c, NEUT, APN and Hcy are independent risk factors for AMI in patients with coronary heart disease. All of these indicators have predictive value.

Objective To explore the changes in the levels of serum myocardial injury markers troponin I(cTNI),myoglobin(MYO),creatine kinase isoenzyme(CK-MB),and N-terminal pro-B natriuretic peptide precursor(NT-proBNP)in elderly patients with hypertension complicated with heart failure and their clinical value.Methods A total of 110 elderly patients with hypertension complicated with heart failure in the hospi-tal from February 2022 to February 2024 were selected as the hypertension complicated with heart failure group.During the same period,110 patients with simple heart failure were selected as the heart failure group,and 110 patients with simple hypertension were selected as the hypertension group.The levels of serum cTNI,MYO,CK-MB and NT-proBNP in each group were compared.Multivariate Logistic regression was used to an-alyze the influencing factors of hypertension complicated with heart failure.The receiver operating characteris-tic(ROC)curve was drawn to analyze the diagnostic efficacy of serum cTNI,MYO,CK-MB and NT-proBNP for hypertension complicated with heart failure.Results Compared with the hypertension group,the levels of serum cTNI,MYO,CK-MB and NT-proBNP in the hypertension combined with heart failure group and the heart failure group increased(P＜0.05);Compared with the heart failure group,the levels of serum MYO and NT-proBNP in the hypertension combined with heart failure group increased(P＜0.05).The results of multi-variate Logistic regression analysis showed that NT-proBNP was an independent influencing factor for hyper-tension complicated with heart failure(P＜0.05).The results of the ROC curve showed that the areas under the curve of serum cTNI,MYO,CK-MB,and NT-proBNP alone and in combination for the diagnosis of hyper-tension complicated with heart failure were 0.768,0.729,0.687,0.904,and 0.905,respectively.The sensitivi-ties were 96.4％,50.0％,79.1％,90.0％and 90.9％respectively,and the specificities were 54.1％,100.0％,60.0％,78.2％and 75.0％respectively.Conclusion Serum cTNI,MYO,CK-MB and NT-proBNP are highly expressed in elderly patients with hypertension complicated with heart failure.The combination of the four has a high diagnostic value for hypertension complicated with heart failure.

Objective To study the development of conus medullaris by quantitative three-dimensional ultrasound in the second and third trimesters of pregnancy,and to analyze the value of terminal caudal vertebral ossification center count in diagnosis of closed spina bifida.Methods A total of 108 normal fetuses in the second and third trimesters of pregnancy who were admitted to Baoding No.1 Central Hospital from January 2019 to March 2024 were selected and assigned to the normal group.The distance between the fetal conus medullaris and the first sacral vertebra,the distance between the end of the conus medullaris and the end of sacrum,and the number of corresponding vertebrae were measured by three-dimensional ultrasound at different gestational weeks.Meanwhile,54 fetuses who were confirmed to have closed spina bifida after delivery were enrolled into the abnormal group.The number of ossification centers on the median sagittal section of the caudal spine was counted and compared between the two groups.The receiver operating characteristic(ROC)curve was drawn to analyze the value of ossification center count of distal caudal vertebrae in diagnosis of closed spina bifida.Results With the increase of gestational weeks,the distance between the fetal conus medullaris and the first sacral vertebra and the distance between the end of the conus medullaris and the end of the sacral bone were gradually increased.The conus medullaris of normal fetuses was mainly located in L1.5,L2 and L2.5,accounting for 85.19%(92/108).The ossification center count of distal caudal vertebra was slightly increased with the increase of gestational weeks in the normal group.At 17-20 gestational weeks,85.71%(12/14)of the ossification center count of distal caudal vertebra was 5 to 7.At 21-28 gestational weeks,100.00%(45/45)of the ossification center count was 6 and more.At week 29 and above,100.00%(45/45)of the ossification center count was more than 7.In the abnormal group,96.30%(52/54)of the fetuses had the ossification center less than 6,and 85.71%(42/49)of the ossification center count was≤5 at 21-32 gestational weeks.There were significant differences in the ossification center count between the two groups at 17-20,21-24,25-28,29-32,and 33-36 gestational weeks(P<0.05).ROC curve showed that,at 17-20,21-24,25-28,29-32,and 33-36 gestational weeks,the area under the curve(AUC)in prediction of closed spina bifida was 0.804,0.744,0.776,0.819,and 0.722 when the ossification center count of distal caudal vertebra was 5.31,4.59,4.81,4.67,and 5.49 as the cut-off value,respectively.Conclusion The conus medullaris moves upward with the increase of gestational weeks in the second and third trimesters of pregnancy.The ossification center count of the distal caudal vertebra is less than 6 in most fetuses with closed spina bifida,which is conducive to screening for closed spina bifida.

Abiotic stresses substantially affect the growth and development of plants. Plants have evolved multiple strategies to cope with the environmental stresses, among which transcription factors play an important role in regulating the tolerance to abiotic stresses. Basic leucine zipper transcription factors (bZIP) are one of the largest gene families. The stability and activity of bZIP transcription factors could be regulated by different post-translational modifications (PTMs) in response to various intracellular or extracellular stresses. This paper introduces the structural feature and classification of bZIP transcription factors, followed by summarizing the PTMs of bZIP transcription factors, such as phosphorylation, ubiquitination and small ubiquitin-like modifier (SUMO) modification, in response to abiotic stresses. In addition, future perspectives were prospected, which may facilitate cultivating excellent stress-resistant crop varieties by regulating the PTMs of bZIP transcription factors.
Basic-Leucine Zipper Transcription Factors/genetics* ; Protein Processing, Post-Translational ; Phosphorylation ; Transcription Factors/genetics* ; Stress, Physiological/genetics*

ObjectiveTo evaluate the effectiveness and safety of Qiaoqi Formula （翘芪组方） for mild influenza. MethodsA randomized controlled study was designed， recruiting 74 patients with mild influenza， who were randomly divided into trial group and control group. The trial group took Qiaoqi Formula orally， 40ml each time， twice a day； the control group took Lianhua Qingwen Capsules （连花清瘟胶囊） orally， 1.4 g each time， three times a day. Both groups were treated for 3 consecutive days and follow-up for 4 consecutive days after treatment. The time for fever reduction including onset of fever reduction， complete fever reduction time， fever reduction rates at 24， 48 and 72 hours， improvement of influenza symptoms， total traditional Chinese medicine （TCM） symptom score， and safety indicators in two groups after treatment were recorded. ResultsSixty-five patients were ultimately included， including 36 in the trial group and 29 in the control group. Onset time of fever reduction in the trial group was （15.49±23.47） h， the complete fever reduction time （21.37±30.06）h， and the 24 h， 48 h， 72 h， fever reduction rate was 77.14%， 88.57%， 91.42% respectively. The above indicators of the control group showed as （17.58±20.38）h， （24.30±21.87）h， 61.29%， 90.32%， 96.77% respectively， with no statistically significant differences （P＞0.05）. On the 7th day after treatment， the total score of TCM syndromes in trial group and control group decreased compared to those before treatment （P＜0.05）. There was no statistically significant difference in the cure rate， significant effective rate， effective rate， and total effective rate of TCM syndromes between groups （P＞0.05）. On the 4th day， the lymphocyte ratio of patients in the control group was higher than before treatment， while alanine aminotransferase （ALT）， aspartate aminotransferase （AST）， urea， and creatinine of both groups before and after treatment were within the normal range. The main adverse reactions in both groups were mild headache and dizziness， and no serious adverse reactions observed. ConclusionThe therapeutic effect of Qiaoqi Formula in treating mild influenza is equivalent to Lianhua Qingwen Capsules， which can shorten the fever reduction time， improve clinical symptoms， and no adverse events observed during the study.

Objective:To explore the potential of integrating virtual surgery with three-dimensional (3D) printed guides in the surgical management of mandibular benign tumors and subsequent reconstruction of bone defects.Methods:A retrospective analysis was conducted on the clinical data of patients who underwent computer-assisted resection and vascularized fibular flap reconstruction for benign mandibular tumors at the Department of Oral and Maxillofacial Surgery, First Affiliated Hospital of Zhengzhou University, from June 2013 to December 2020. According to the utilization of guide plates for mandibular and fibular osteotomy during surgical procedures or not, the patients were categorized into two cohorts: a guide plate cohort and a non-guide plate cohort. In the guide plate group, custom-designed gudie plates based on virtual surgical plans were fabricated using 3D printing technology and employed intraoperatively; In the non-guide plate group, surgery was exclusively performed based on virtual surgical plan and prebent titanium plate without any supplementary plating. The measured outcomes included fibular flap osteotomy, operation duration, and clinical flap survival. Computed tomography images obtained one week post-surgery were utilized to assess the intersegmental commissure degree between fibular segments as well as between fibular segments and mandible, commissure degree between fibular segments and prebent titanium plate, and condyle position. The satisfaction of patients with their facial appearance was evaluated 6 months after the surgery using a visual analogue scale. Statistical analysis was conducted using SPSS 21.0 software. Independent sample t-tests was utilized to compare the duration of operation and and postoperative evaluation of facial appearance, the Chi-square tests was utilized for condyle position, commissure degrees among interactions involving fibular segments, prebent titanium plates, bone segments( P<0.05 denoted statistical significance). Results:A total of 30 patients were enrolled, comprising 17 males and 13 females, with a median age of 24 years (16-64 years). The preparation process of fibular flaps proceeded smoothly. The required length of fibula was measured as (14.1 ± 1.9) cm (5.7-18.1 cm), while the number of fibular segments ranged from 2 to 4, averaging at approximately 2.9 ± 0.6. The mandibular defects were repaired using a single-layer fibula in 12 cases, a vascularized folded fibula in 7 cases and a combination of vascularized and non-vascularized fibula in 11 cases. The operation time for the guide plate group was recorded as ( 335.9 ± 64.0) min (240-433 min), while it was observed to be (470.7 ± 140.5 ) min (280-680 min) for the non-guide plate group.The postoperative follow-up duration ranged from 9 to 23 months, with an average period of 11 months. All fibular flaps demonstrated clinical survival. The number of patients with good commissure degree between fibular and mandibular segments, between prebent titanium plate and fibular and mandibular segments and the position of condyle were 15, 15 and 13 cases in guide plate group, 10, 13 and 11 cases in non-guide plate group respectively. The statistical analysis revealed a significant difference ( P<0.05) in the degree of commissure between the fibular and the mandibular segments (15/15 vs. 10/15) in the two groups. Both groups exhibited high levels of satisfaction regarding their postoperative facial appearance at the 6 months follow-up, observed to be 9.6±0.5 and 9.3±0.5 respectively, and the statisticla analysis revealed non-significant difference ( P>0.05). Conclusion:The integration of virtual surgery with 3D printed guide plates can effectively reduce operative time and improve precision in the repair and reconstruction of free-fibular flaps following resection of benign tumors of the mandible.

Objective:To explore the potential of integrating virtual surgery with three-dimensional (3D) printed guides in the surgical management of mandibular benign tumors and subsequent reconstruction of bone defects.Methods:A retrospective analysis was conducted on the clinical data of patients who underwent computer-assisted resection and vascularized fibular flap reconstruction for benign mandibular tumors at the Department of Oral and Maxillofacial Surgery, First Affiliated Hospital of Zhengzhou University, from June 2013 to December 2020. According to the utilization of guide plates for mandibular and fibular osteotomy during surgical procedures or not, the patients were categorized into two cohorts: a guide plate cohort and a non-guide plate cohort. In the guide plate group, custom-designed gudie plates based on virtual surgical plans were fabricated using 3D printing technology and employed intraoperatively; In the non-guide plate group, surgery was exclusively performed based on virtual surgical plan and prebent titanium plate without any supplementary plating. The measured outcomes included fibular flap osteotomy, operation duration, and clinical flap survival. Computed tomography images obtained one week post-surgery were utilized to assess the intersegmental commissure degree between fibular segments as well as between fibular segments and mandible, commissure degree between fibular segments and prebent titanium plate, and condyle position. The satisfaction of patients with their facial appearance was evaluated 6 months after the surgery using a visual analogue scale. Statistical analysis was conducted using SPSS 21.0 software. Independent sample t-tests was utilized to compare the duration of operation and and postoperative evaluation of facial appearance, the Chi-square tests was utilized for condyle position, commissure degrees among interactions involving fibular segments, prebent titanium plates, bone segments( P<0.05 denoted statistical significance). Results:A total of 30 patients were enrolled, comprising 17 males and 13 females, with a median age of 24 years (16-64 years). The preparation process of fibular flaps proceeded smoothly. The required length of fibula was measured as (14.1 ± 1.9) cm (5.7-18.1 cm), while the number of fibular segments ranged from 2 to 4, averaging at approximately 2.9 ± 0.6. The mandibular defects were repaired using a single-layer fibula in 12 cases, a vascularized folded fibula in 7 cases and a combination of vascularized and non-vascularized fibula in 11 cases. The operation time for the guide plate group was recorded as ( 335.9 ± 64.0) min (240-433 min), while it was observed to be (470.7 ± 140.5 ) min (280-680 min) for the non-guide plate group.The postoperative follow-up duration ranged from 9 to 23 months, with an average period of 11 months. All fibular flaps demonstrated clinical survival. The number of patients with good commissure degree between fibular and mandibular segments, between prebent titanium plate and fibular and mandibular segments and the position of condyle were 15, 15 and 13 cases in guide plate group, 10, 13 and 11 cases in non-guide plate group respectively. The statistical analysis revealed a significant difference ( P<0.05) in the degree of commissure between the fibular and the mandibular segments (15/15 vs. 10/15) in the two groups. Both groups exhibited high levels of satisfaction regarding their postoperative facial appearance at the 6 months follow-up, observed to be 9.6±0.5 and 9.3±0.5 respectively, and the statisticla analysis revealed non-significant difference ( P>0.05). Conclusion:The integration of virtual surgery with 3D printed guide plates can effectively reduce operative time and improve precision in the repair and reconstruction of free-fibular flaps following resection of benign tumors of the mandible.

Background Agitated behaviour in male patients with schizophrenia can lead to serious consequences for the individual and the society.Non-invasive drug delivery may help to rapidly control agitation and improve the overall patient satisfaction,but there are limited studies on the efficacy of olanzapine oral soluble film for the treatment of agitated behaviour in patients with schizophrenia.Objective To compare the efficacy and safety profile of olanzapine oral soluble film versus intramuscular haloperidol against agitated behaviour in male patients with schizophrenia,so as to provide a reference for the treatment of agitated behaviour.Methods From May 2022 to July 2023,a consecutive sample of schizophrenic patients(n=44)with agitated behaviour who met the Diagnostic and Statistical Manual of Mental Disorders,fifth edition(DSM-5)were recruited in the male psychiatric closed ward of the Third People's Hospital of Fuyang.Patients were assigned into two groups using the random number table method,each with 22 cases.Study group was treated with olanzapine oral soluble film 10 mg/d,while control group was given intramuscular haloperidol 8 mg/d.The severity of agitated behaviour was determined using Positive and Negative Syndrome Scale-Excited Component(PANSS-EC)and Agitation Calmness Evaluation Scale(ACES)at the baseline and after 6 h of drug administration.The treatment response rate was calculated based on the reduction of PANSS-EC score,and the drug side effects were assessed using Rating Scale for Extrapyramidal Side Effects(RSESE)and Barnes Akathisia Rating Scale(BARS)after 6 h of drug administration.Results After 6 h of drug administration,no statistical difference was reported in PANSS-EC score and ACES score between two groups(F=0.039,0.082,P>0.05),and the treatment response rate yielded no statistical difference between two groups(χ2=0.419,P=0.517),while study group reported a lower incidence rate of adverse reactions compared with control group,with statistically significant difference(P=0.031).BARS scores noted no statistical significant difference between two groups(t=0.587,P=0.561),whereas study group scored lower on RSES compared to control group,with a statistical difference(t=-7.367,P<0.01).Conclusion In the treatment of agitation in male patients with schizophrenia,the efficacy of olanzapine oral soluble film is comparable to that of intramuscular haloperidol,while the safety profile of the former is superior to that of the latter.

Objective To explore the construction idea and application method of knowledge base and knowledge mining system for the prevention and treatment of diseases in traditional Chinese medicine.Methods Guided by the theory of traditional Chinese medicine(TCM),firstly,the knowledge system of TCM Prevention and treatment was sorted out,and the structure and relationship of TCM Prevention and treatment knowledge base were designed according to the classification method of TCM Prevention and treatment;Secondly,according to the needs of pre treatment research,the ancient and modern literature data sources and knowledge collection methods of TCM pre treatment database are proposed;Then,under the framework of the pre treatment classification system,the core knowledge is studied in the aspects of professional annotation,relationship extraction,knowledge audit,and a variety of data mining algorithms are introduced to analyze and mine the knowledge;Finally,the massive data obtained are combined with big data analysis and computer machine learning to realize intelligent information collection,disease analysis and diagnosis and treatment suggestions.Results Under the guidance of traditional Chinese medicine theory,the knowledge base of traditional Chinese medicine for prevention and treatment of diseases can digitize,digitize and intellectualize the basic knowledge and clinical knowledge of traditional Chinese medicine for prevention and treatment of diseases,and can objectively mine and analyze the data,providing a basis for the service and sharing of knowledge of traditional Chinese medicine for prevention and treatment of diseases.Conclusion The knowledge base of TCM Prevention and treatment is an important way for the digital storage of TCM Prevention and treatment knowledge,and provides literature knowledge support and objective evidence of data mining for TCM Prevention and treatment research.