In this paper， by referring to ancient and modern literature， the textual research of Inulae Flos has been conducted to clarify the name， origin， production area， quality evaluation， harvesting， processing and others， so as to provide reference and basis for the development and utilization of famous classical formulas containing this herb. After textual research， it could be verified that the medicinal use of Inulae Flos was first recorded in Shennong Bencaojing of the Han dynasty. In successive dynasties， Xuanfuhua has been taken as the official name， and it also has other alternative names such as Jinfeicao， Daogeng and Jinqianhua. The period before the Song and Yuan dynasties， the main origin of Inulae Flos was the Asteraceae plant Inula japonica， and from the Ming and Qing dynasties to the present， I. japonica and I. britannica are the primary source. In addition to the dominant basal species， there are also regional species such as I. linariifolia， I. helianthus-aquatili， and I. hupehensis. The earliest recorded production areas in ancient times were Henan， Hubei and other places， and the literature records that it has been distributed throughout the country since modern times. The medicinal part is its flower， the harvesting and processing method recorded in the past dynasties is mainly harvested in the fifth and ninth lunar months， and dried in the sun， and the modern harvesting is mostly harvested in summer and autumn when the flowers bloom， in order to remove impurities， dry in the shade or dry in the sun. In addition， the roots， whole herbs and aerial parts are used as medicinal materials. In ancient times， there were no records about the quality of Inulae Flos， and in modern times， it is generally believed that the quality of complete flower structure， small receptacles， large blooms， yellow petals， long filaments， many fluffs， no fragments， and no branches is better. Ancient processing methods primarily involved cleaning， steaming， and sun-drying， supplemented by techniques such as boiling， roasting， burning， simmering， stir-frying， and honey-processing. Modern processing focuses mainly on cleaning the stems and leaves before use. Regarding the medicinal properties， ancient texts describe it as salty and sweet in taste， slightly warm in nature， and mildly toxic. Modern studies characterize it as bitter， pungent， and salty in taste， with a slightly warm nature. Its therapeutic effects remain consistent across eras， including descending Qi， resolving phlegm， promoting diuresis， and stopping vomiting. Based on the research results， it is recommended that when developing famous classical formulas containing Inulae Flos， either I. japonica or I. britannica should be used as the medicinal source. Processing methods should follow formula requirements， where no processing instructions are specified， the raw products may be used after cleaning.

In this paper， by referring to ancient and modern literature， the textual research of Inulae Flos has been conducted to clarify the name， origin， production area， quality evaluation， harvesting， processing and others， so as to provide reference and basis for the development and utilization of famous classical formulas containing this herb. After textual research， it could be verified that the medicinal use of Inulae Flos was first recorded in Shennong Bencaojing of the Han dynasty. In successive dynasties， Xuanfuhua has been taken as the official name， and it also has other alternative names such as Jinfeicao， Daogeng and Jinqianhua. The period before the Song and Yuan dynasties， the main origin of Inulae Flos was the Asteraceae plant Inula japonica， and from the Ming and Qing dynasties to the present， I. japonica and I. britannica are the primary source. In addition to the dominant basal species， there are also regional species such as I. linariifolia， I. helianthus-aquatili， and I. hupehensis. The earliest recorded production areas in ancient times were Henan， Hubei and other places， and the literature records that it has been distributed throughout the country since modern times. The medicinal part is its flower， the harvesting and processing method recorded in the past dynasties is mainly harvested in the fifth and ninth lunar months， and dried in the sun， and the modern harvesting is mostly harvested in summer and autumn when the flowers bloom， in order to remove impurities， dry in the shade or dry in the sun. In addition， the roots， whole herbs and aerial parts are used as medicinal materials. In ancient times， there were no records about the quality of Inulae Flos， and in modern times， it is generally believed that the quality of complete flower structure， small receptacles， large blooms， yellow petals， long filaments， many fluffs， no fragments， and no branches is better. Ancient processing methods primarily involved cleaning， steaming， and sun-drying， supplemented by techniques such as boiling， roasting， burning， simmering， stir-frying， and honey-processing. Modern processing focuses mainly on cleaning the stems and leaves before use. Regarding the medicinal properties， ancient texts describe it as salty and sweet in taste， slightly warm in nature， and mildly toxic. Modern studies characterize it as bitter， pungent， and salty in taste， with a slightly warm nature. Its therapeutic effects remain consistent across eras， including descending Qi， resolving phlegm， promoting diuresis， and stopping vomiting. Based on the research results， it is recommended that when developing famous classical formulas containing Inulae Flos， either I. japonica or I. britannica should be used as the medicinal source. Processing methods should follow formula requirements， where no processing instructions are specified， the raw products may be used after cleaning.

BACKGROUND:Curcumin is the main active ingredient of turmeric and has significant medicinal value in anti-tumor,anti-inflammatory,antioxidant and other aspects.However,its poor water solubility,unstable chemical properties and easy decomposition lead to difficulty in extracting curcumin and low extraction yield.Therefore,it is particularly important to optimize the curcumin extraction method.OBJECTIVE:To enhance the extraction yield and utilization value of curcumin and optimize the curcumin extraction process and curcumin nanoparticle preparation process.METHODS:Curcumin was extracted from turmeric by ethanol extraction,ultrasonic extraction,ionic liquid extraction,enzyme extraction,and ionic liquid combined with ultrasonic assisted enzyme extraction.The curcumin extraction yield was detected by high performance liquid chromatography;the best extraction method was determined,and subsequent process optimization experiments were carried out.The curcumin extraction yield was the response value with the type of ionic liquid,reaction temperature,ultrasonic time,liquid-to-solid ratio,ionic liquid concentration,and enzyme-drug mass ratio as parameters.The optimal production process of ionic liquid combined with ultrasonic assisted enzyme extraction was determined by single factor combined response surface experiment.The optimal process for preparing curcumin nanoparticles by ionic crosslinking method was determined by single factor combined response surface experiment with acetic acid concentration,chitosan to sodium tripolyphosphate mass ratio,stirring rate,curcumin mass concentration,sodium tripolyphosphate mass concentration,and chitosan mass concentration as parameters,and drug encapsulation efficiency as response value.Curcumin nanoparticles were prepared under the optimal process,and the particle size,polydispersity index,Zata potential value,drug loading,stability,hemolysis rate,and antioxidant capacity in vivo and in vitro of the nanoparticles were detected.RESULTS AND CONCLUSION:(1)Among the five extraction methods,the curcumin yield of ionic liquid combined with ultrasound-assisted enzyme extraction was the highest,and this method was selected as the curcumin extraction method for subsequent experiments.The results of single factor combined response surface experiment showed that the optimal process for curcumin extraction was:ionic liquid selected 1-hexyl-3-methylimidazolium chloride,reaction temperature 55 ℃,liquid-to-solid ratio 40 mL/g,ultrasound time 57 minutes,ionic liquid concentration 57％,enzyme-drug mass ratio 3.5:10,and the obtained turmeric extraction yield was 3.10％.The optimal preparation process of curcumin nanoparticles was:glacial acetic acid concentration 0.5％,chitosan and sodium tripolyphosphate mass ratio 5.0:1,stirring speed 150 r/min,curcumin mass concentration 2.23 mg/mL,sodium tripolyphosphate mass concentration 1.45 mg/mL,chitosan mass concentration 3.63 mg/mL,and the obtained drug encapsulation efficiency was 90.61％.(2)The drug loading of curcumin nanoparticles was(14.49±0.23)％,the average particle size was(76.95±1.65)nm,the polydispersity coefficient was 0.15±0.02,and the Zata potential value was(32.37±1.46)mV.The curcumin nanoparticles had good stability and blood compatibility,did not induce hemolysis,and had stronger antioxidant capacity in vivo and in vitro than free curcumin.(3)The results show that the process optimization not only solves the problems of low extraction yield,poor solubility,and low bioavailability of curcumin,but also enhances its antioxidant activity in vivo and in vitro.

BACKGROUND:Curcumin is the main active ingredient of turmeric and has significant medicinal value in anti-tumor,anti-inflammatory,antioxidant and other aspects.However,its poor water solubility,unstable chemical properties and easy decomposition lead to difficulty in extracting curcumin and low extraction yield.Therefore,it is particularly important to optimize the curcumin extraction method.OBJECTIVE:To enhance the extraction yield and utilization value of curcumin and optimize the curcumin extraction process and curcumin nanoparticle preparation process.METHODS:Curcumin was extracted from turmeric by ethanol extraction,ultrasonic extraction,ionic liquid extraction,enzyme extraction,and ionic liquid combined with ultrasonic assisted enzyme extraction.The curcumin extraction yield was detected by high performance liquid chromatography;the best extraction method was determined,and subsequent process optimization experiments were carried out.The curcumin extraction yield was the response value with the type of ionic liquid,reaction temperature,ultrasonic time,liquid-to-solid ratio,ionic liquid concentration,and enzyme-drug mass ratio as parameters.The optimal production process of ionic liquid combined with ultrasonic assisted enzyme extraction was determined by single factor combined response surface experiment.The optimal process for preparing curcumin nanoparticles by ionic crosslinking method was determined by single factor combined response surface experiment with acetic acid concentration,chitosan to sodium tripolyphosphate mass ratio,stirring rate,curcumin mass concentration,sodium tripolyphosphate mass concentration,and chitosan mass concentration as parameters,and drug encapsulation efficiency as response value.Curcumin nanoparticles were prepared under the optimal process,and the particle size,polydispersity index,Zata potential value,drug loading,stability,hemolysis rate,and antioxidant capacity in vivo and in vitro of the nanoparticles were detected.RESULTS AND CONCLUSION:(1)Among the five extraction methods,the curcumin yield of ionic liquid combined with ultrasound-assisted enzyme extraction was the highest,and this method was selected as the curcumin extraction method for subsequent experiments.The results of single factor combined response surface experiment showed that the optimal process for curcumin extraction was:ionic liquid selected 1-hexyl-3-methylimidazolium chloride,reaction temperature 55 ℃,liquid-to-solid ratio 40 mL/g,ultrasound time 57 minutes,ionic liquid concentration 57％,enzyme-drug mass ratio 3.5:10,and the obtained turmeric extraction yield was 3.10％.The optimal preparation process of curcumin nanoparticles was:glacial acetic acid concentration 0.5％,chitosan and sodium tripolyphosphate mass ratio 5.0:1,stirring speed 150 r/min,curcumin mass concentration 2.23 mg/mL,sodium tripolyphosphate mass concentration 1.45 mg/mL,chitosan mass concentration 3.63 mg/mL,and the obtained drug encapsulation efficiency was 90.61％.(2)The drug loading of curcumin nanoparticles was(14.49±0.23)％,the average particle size was(76.95±1.65)nm,the polydispersity coefficient was 0.15±0.02,and the Zata potential value was(32.37±1.46)mV.The curcumin nanoparticles had good stability and blood compatibility,did not induce hemolysis,and had stronger antioxidant capacity in vivo and in vitro than free curcumin.(3)The results show that the process optimization not only solves the problems of low extraction yield,poor solubility,and low bioavailability of curcumin,but also enhances its antioxidant activity in vivo and in vitro.

Objective: Scutellarin in Shuganning injection has potential allergenicity and is prone to causing anaphylactoid reactions. There is an urgent need to establish a simple and rapid chromatographic quantitative method to achieve the limit control of scutellarin in Shuganning injection.
Methods: For scutellarin, HPLC method was used in the quantitative analysis using a Shim-pack GIS C₁₈ (2.1 mm×150 mm, 5 μm) column. The mobile phase was a blend of 0.1% trifluoroacetic acid in water and acetonitrile, and gradient elution progress was applied for the whole process. The flow rate was 0.3 mL·min^-1 and the column temperature was maintained at 37 ℃. The detecting wavelength was 320 nm.
Results: The linear regression equation was y=51 456x-27 352, the correlation coefficient r=0.999 8, namely the calibration curve was linear in the range of 1.02-102.00 μg·mL^-1; the average recovery was 103.76%; the detection and quantification limit for determining scutellarin was 0.16 μg·mL^-1 and 0.57 μg·mL^-1, respectively; the injection sample was stable at room temperature for 48 h.
Conclusion: This method is easy to operate, reproducible and has high accuracy, thus can be used for quality control of Shuganning injection.

Neurological diseases are a major health concern, and brain injury is a typical pathological process in various neurological disorders. Different biomarkers in the blood or the cerebrospinal fluid are associated with specific physiological and pathological processes. They are vital in identifying, diagnosing, and treating brain injuries. In this review, we described biomarkers for neuronal cell body injury (neuron-specific enolase, ubiquitin C-terminal hydrolase-L1, αII-spectrin), axonal injury (neurofilament proteins, tau), astrocyte injury (S100β, glial fibrillary acidic protein), demyelination (myelin basic protein), autoantibodies, and other emerging biomarkers (extracellular vesicles, microRNAs). We aimed to summarize the applications of these biomarkers and their related interests and limits in the diagnosis and prognosis for neurological diseases, including traumatic brain injury, status epilepticus, stroke, Alzheimer's disease, and infection. In addition, a reasonable outlook for brain injury biomarkers as ideal detection tools for neurological diseases is presented.
Humans ; Biomarkers/cerebrospinal fluid* ; Nervous System Diseases/diagnosis* ; Brain Injuries/metabolism* ; Phosphopyruvate Hydratase/cerebrospinal fluid* ; Glial Fibrillary Acidic Protein/blood* ; S100 Calcium Binding Protein beta Subunit/blood* ; tau Proteins/cerebrospinal fluid* ; Ubiquitin Thiolesterase/blood* ; Myelin Basic Protein/cerebrospinal fluid* ; Neurofilament Proteins/blood* ; MicroRNAs/blood* ; Brain Injuries, Traumatic/metabolism*

BACKGROUND: The primary limitation to kidney transplantation is organ shortage. Recent progress in gene editing and immunosuppressive regimens has made xenotransplantation with porcine organs a possibility. However, evidence in pig-to-human xenotransplantation remains scarce, and antibody-mediated rejection (AMR) is a major obstacle to clinical applications of xenotransplantation. METHODS: We conducted a kidney xenotransplantation in a brain-dead human recipient using a porcine kidney with five gene edits (5GE) on March 25, 2024 at Xijing Hospital, China. Clinical-grade immunosuppressive regimens were employed, and the observation period lasted 22 days. We collected and analyzed the xenograft function, ultrasound findings, sequential protocol biopsies, and immune surveillance of the recipient during the observation. RESULTS: The combination of 5GE in the porcine kidney and clinical-grade immunosuppressive regimens prevented hyperacute rejection. The xenograft kidney underwent delayed graft function in the first week, but urine output increased later and the single xenograft kidney maintained electrolyte and pH homeostasis from postoperative day (POD) 12 to 19. We observed AMR at 24 h post-transplantation, due to the presence of pre-existing anti-porcine antibodies and cytotoxicity before transplantation; this AMR persisted throughout the observation period. Plasma exchange and intravenous immunoglobulin treatment mitigated the AMR. We observed activation of latent porcine cytomegalovirus toward the end of the study, which might have contributed to coagulation disorder in the recipient. CONCLUSIONS 5GE and clinical-grade immunosuppressive regimens were sufficient to prevent hyperacute rejection during pig-to-human kidney xenotransplantation. Pre-existing anti-porcine antibodies predisposed the xenograft to AMR. Plasma exchange and intravenous immunoglobulin were safe and effective in the treatment of AMR after kidney xenotransplantation.
Transplantation, Heterologous/methods* ; Kidney Transplantation/methods* ; Heterografts/pathology* ; Immunoglobulins, Intravenous/administration & dosage* ; Graft Survival/immunology* ; Humans ; Animals ; Sus scrofa ; Graft Rejection/prevention & control* ; Kidney/pathology* ; Gene Editing ; Species Specificity ; Immunosuppression Therapy/methods* ; Plasma Exchange ; Brain Death ; Biopsy ; Male ; Aged

BACKGROUND: The effect of the interval between previous Helicobacter pylori (H. pylori) eradication and rescue treatment on therapeutic outcomes remains unknown. The aim of this study was to investigate the association between eradication rates and treatment interval durations in H. pylori infections. METHODS: This prospective observational study was conducted from December 2021 to February 2023 at six tertiary hospitals in Shandong, China. We recruited patients who were positive for H. pylori infection and required rescue treatment. Demographic information, previous times of eradication therapy, last eradication therapy date, and history of antibiotic use data were collected. The patients were divided into four groups based on the rescue treatment interval length: Group A, ≥4 weeks and ≤3 months; Group B, >3 and ≤6 months; Group C, >6 and ≤12 months; and Group D, >12 months. The primary outcome was the eradication rate of H. pylori . Drug compliance and adverse events (AEs) were also assessed. Pearson's χ2 test or Fisher's exact test was used to compare eradication rates between groups. RESULTS: A total of 670 patients were enrolled in this study. The intention-to-treat (ITT) eradication rates were 88.3% (158/179) in Group A, 89.6% (120/134) in Group B, 89.1% (123/138) in Group C, and 87.7% (192/219) in Group D. The per-protocol (PP) eradication rates were 92.9% (156/168) in Group A, 94.5% (120/127) in Group B, 94.5% (121/128) in Group C, and 93.6% (190/203) in Group D. There was no statistically significant difference in the eradication rates between groups in either the ITT ( P = 0.949) or PP analysis ( P = 0.921). No significant differences were observed in the incidence of AEs ( P = 0.934) or drug compliance ( P = 0.849) between groups. CONCLUSION: The interval duration of rescue treatment had no significant effect on H. pylori eradication rates or the incidence of AEs. REGISTRATION ClinicalTrials.gov , NCT05173493.
Humans ; Helicobacter Infections/drug therapy* ; Helicobacter pylori/pathogenicity* ; Male ; Female ; Prospective Studies ; Middle Aged ; Anti-Bacterial Agents/adverse effects* ; Adult ; Aged ; Treatment Outcome ; Proton Pump Inhibitors/therapeutic use*

BACKGROUND: The American Heart Association (AHA) introduced the concept of cardiovascular-kidney-metabolic (CKM) health and stage, reflecting the interaction among metabolism, chronic kidney disease (CKD), and the cardiovascular system. However, the association between CKM stage and the long-term risk of cardiovascular disease (CVD) has not been validated. This study aimed to evaluate the long-term CVD risk associated with CKM health metrics and CKM stage using data from a population-based cohort study. METHODS: In total, 5293 CVD-free participants were followed up to around 13 years in the Chinese Multi-provincial Cohort Study (CMCS). Considering the pathophysiologic progression of CKM health metrics abnormalities (comprising obesity, central adiposity, prediabetes, diabetes, hypertriglyceridemia, CKD, and metabolic syndrome), participants were divided into CKM stages 0, 1, and 2. The time-dependent Cox regression models were used to estimate the cardiovascular risk associated with CKM health metrics and stage. Additionally, broader CVD outcomes were examined, with a specific assessment of the impact of stage 3 in 2581 participants from the CMCS-Beijing subcohort. RESULTS: Among participants, 91.2% (4825/5293) had at least one abnormal CKM health metric, 8.8% (468/5293), 13.3% (704/5293), and 77.9% (4121/5293) were in CKM stages 0, 1, and 2, respectively; and 710 incident CVD cases occurred during a median follow-up time of 13.3 years (interquartile range: 12.1 to 13.6 years). Participants with each poor CKM health metric exhibited significantly higher CVD risk. Compared with stage 0, the hazard ratio (HR) (95% confidence interval [CI]) for CVD incidence was 1.31 (0.84-2.04) in stage 1 and 2.27 (1.57-3.28) in stage 2. Significant interactive impacts existed between CKM stage and age or sex, with higher CVD risk related to increased CKM stages in participants aged <60 years or females. CONCLUSION These findings highlight the contribution of CKM health metrics and CKM stage to the long-term risk of CVD, suggesting the importance of multi-component recognition and management of poor CKM health in CVD prevention.
Humans ; Female ; Male ; Cardiovascular Diseases/etiology* ; Middle Aged ; Adult ; Cohort Studies ; Renal Insufficiency, Chronic/metabolism* ; Aged ; Risk Factors ; Metabolic Syndrome/metabolism* ; China ; East Asian People