As the core vehicle for preserving and transmitting traditional Chinese medicine（TCM） academic thought and clinical experience， the establishment of a robust quality evaluation system for TCM clinical case reports is a crucial component in the current standardization and modernization of TCM. Based on the practical experience of constructing the China Clinical Cases Library of Traditional Chinese Medicine by the China Association of Chinese Medicine， this study conducted a comprehensive analysis of critical challenges， including insufficient authenticity and unfocused evaluation criteria. It proposed a three-dimensional evaluation framework grounded in the structure-process-outcome logic， encompassing three dimensions of authenticity and standardization， characteristics and advantages， application and translational impact. This framework integrated 12 key evaluation indicators in a systematic manner. The model preserved the academic characteristics of TCM syndrome differentiation and treatment， while aligning with modern scientific research standards， achieving a balance between individualized TCM experience and standardized evaluation. Concurrently， this study provided theoretical foundations and methodological guidance for evaluating the quality of TCM clinical cases， contributing significantly to the inheritance of TCM knowledge， evidence-based practice， and the reform of talent evaluation mechanisms.

Objective To investigate the distribution characteristics of Oncomelania hupensis snails in Yunnan Province fol-lowing interruption of schistosomiasis transmission, so as to provide the evidence for assessing the risk of schistosomiasis transmission and scientifically formulating the schistosomiasis surveillance program. Methods According to the requirements of the National Schistosomiasis Surveillance Scheme (2020 Edition), O. hupensis snail surveillance data were collected from 18 schistosomiasis-endemic counties (cities, districts) in Yunnan Province from 2020 to 2024, including area of snail survey, area of snail habitats, area of re-emerging snail habitats, number of frames surveyed, number of frames with O. hupensis snails, number of O. hupensis snails captured, and number of living snails, and the occurrence of frames with snails and mean density of living snails were calculated. Changes in snail status over the 5-year period from 2020 to 2024 and the differences in snail distributions specified by epidemic intensity, environmental type, and vegetation type were analyzed. Results The areas of snail survey increased from 1 727.96 hm² in 2020 to 3 894.45 hm² in 2024 (peak) across 18 schistosomiasis-endemic counties (cities, districts) in Yunnan Province during the period from 2020 through 2024. The areas of snail habitats increased from 70.36 hm² in 2020 to a peak in 2023 (172.04 hm²), followed by a reduction to 132.36 hm² in 2024, and the areas of re-emerging snail habitats increased from 42.71 hm² in 2020 to a peak in 2022 (78.43 hm²), followed by a reduction to 40.21 hm² in 2024. The occurrence of frames with snails and mean density of living snails increased from 1.24% (3 025/244 404) and (0.033 2 ± 0.038 7) snails/0.1 m² in 2020 to peaks at 2.03% (6 231/307 563) and (0.066 9 ± 0.068 4) snails/0.1 m² in 2023, followed by reductions to 1.04% (5 829/559 941) and (0.032 6 ± 0.057 7) snails/0.1 m² in 2024, respectively. There was a significant difference in the occurrence of frames with snails over the 5-year study period (χ² = 1 962.95, P < 0.05), and the occurrence of frames with snails reduced by 48.71% in 2024 relative to in 2023 (χ² = 1 411.05, P < 0.005); however, there was no significant difference in the mean density of living snails over the 5 years (H = 5.310, P > 0.05). There were significant differences in the occurrence of frames with snails (χ² = 481.27, P < 0.05) and mean density of living snails (H = 6.872, P < 0.05) in schistosomiasis-endemic areas with different epidemic intensities. The occurrence of frames with snails (χ² = 25.32 and 38.70, both P values < 0.017) and mean density of living snails (Z = 28.55 and 49.96, both P values < 0.017) were higher in schistosomiasis transmission-interrupted and eliminated areas with snails than in schistosomiasis-eliminated areas without snails, and the occurrence of frames with snails (χ² = 453.54, P < 0.017) and mean density of living snails (Z = −56.97, P < 0.017) were higher in schistosomiasis-eliminated areas with snails than in schistosomiasis transmission-interrupted areas with snails. O. hupensis snails were mainly distributed in paddy fields, dry farmlands and ditches; however, the occurrence of frames with snails (13.40%, 424/3 164) and mean density of living snails [(0.252 8 ± 0.158 7) snails/0.1 m²] were higher in ponds/weirs than in other types of environments (both P values < 0.05). Rice, dry farmland crops and weeds were main vegetations in which O. hupensis snails were distributed, and the occurrence of frames with snails (2.29%, 7 111/310 140) and mean density of living snails [(0.072 3 ± 0.018 9) snails/0.1 m²] were higher in weeds than in other types of environments (both P values < 0.05). Conclusions O. hupensis snails have been effectively controlled in Yunnan Province following implementation of integrated schistosomiasis control measures; however, there are still risk factors for schistosomiasis transmission, including reduced attention to schistosomiasis control and snail re-emergence. Improved control efforts and surveillance system construction and timely identification of risk factors of snail status and timely management are recommended to ensure the achievement of the target of schistosomiasis elimination as scheduled.

Digital technologies have become an integral part of complete denture restoration. With advancement in computer-aided design and computer-aided manufacturing (CAD/CAM), tools such as intraoral scanning, facial scanning, 3D printing, and numerical control machining are reshaping the workflow of complete denture restoration. Unlike conventional methods that rely heavily on clinical experience and manual techniques, digital technologies offer greater precision, predictability, and efficacy. They also streamline the process by reducing the number of patient visits and improving overall comfort. Despite these improvements, the clinical application of digital complete denture restoration still faces challenges that require further standardization. The major issues include appropriate case selection, establishing consistent digital workflows, and evaluating long-term outcomes. To address these challenges and provide clinical guidance for practitioners, this expert consensus outlines the principles, advantages, and limitations of digital complete denture technology. The aim of this review was to offer practical recommendations on indications, clinical procedures and precautions, evaluation metrics, and outcome assessment to support digital restoration of complete denture in clinical practice.
Humans ; Denture, Complete ; Computer-Aided Design ; Denture Design/methods* ; Consensus ; Printing, Three-Dimensional

Objective To understand the current status of the job competency of full-time healthcare-associated in-fection(HAI)management professionals in all levels and types of medical institutions across China,and provide in-formation and basis for professional training,competency improvement,and career planning.Methods The strati-fied sampling method was adopted to select HAI management professionals from medical institutions in 31 provin-cial-level administrative regions across the country as the research subjects.The designed content of questionnaire involved four parts,including the surveyed personnel's basic information,daily job competency assessment,satis-faction level towards the job,as well as opinions and suggestions on the management of full-time HAI management professionals.The assessment on daily job competency was divided into 13 dimensions,ranging from very incompe-tent to very competent in 5 levels.The scores of HAI management professionals with different professional back-grounds were compared and analyzed.Results A total of 8 709 valid questionnaires were collected,with 3 475 and 3 697 surveyed personnel from tertiary and secondary medical institutions,respectively,and 1 537 from primary or unclassified medical institutions.The overall average score for the competency assessment of full-time HAI manage-ment professionals was(4.17±0.80)points.The scores of professionals with different professional backgrounds,from high to low,were as follows:nursing([4.12±0.81]points),clinical medicine([4.07±0.86]points),pre-ventive medicine([3.93±0.92]points),laboratory medicine([3.88±0.93]points),pharmacy([3.86±0.94]points),and health management([3.85±0.95]points).For the core competency of HAI management professio-nals,such as monitoring and analyzing HAI cases,identifying and investigating HAI outbreaks,the assessment scores for professionals with medical backgrounds were the highest(both P＜0.05).For the basic work of HAI prevention and control,such as checking and guiding the implementation of rules and regulations,guiding occupa-tional protection,management and communication,and implementing HAI management training,professionals with a nursing background had the highest assessment scores(all P＜0.05).Full-time HAI management professionals were relatively satisfied with their training,while those with a background in preventive medicine had lower satisfac-tion with their training,career development,and job benefits(all P＜0.05).Conclusion There are significant differences in the competency of HAI management professionals with different professional backgrounds.It is nece-ssary to optimize division of labor and leverage the strengths,providing ideas and models for promoting the construction of a specialized and professional HAI management team.

Objective:To evaluate the accuracy of L-shaped reduction malarplasty under the guidance of virtual surgical planning (VSP).Methods:The data of adult female patients who were diagnosed with zygomatic protrusion or hypertrophy at Department of Orthognathic and Temporo-mandibular Joint Surgery, West China Hospital of Stomatology, Sichuan University, from January 2018 to December 2020 were analyzed retrospectively. L-shaped reduction malarplasty with or without bone resection and with the mortice and tenon joint structure on the zygomatic arch was conducted either by digital procedures comprising VSP and three-dimensional printing titanium templates (digtal surgery group) or by conventional method (control group). The incidence of postoperative complications and the patient postoperative satisfaction [using a Likert scale with a score ranging from 1 to 5, representing very dissatisfied, dissatisfied, average, satisfied and very satisfied, satisfaction rate = (very satisfied + satisfied)/ total number of patients × 100%] were statistically analyzed in the two groups. The differences in the postoperative symmetry of the zygomatic complex between the digital group and the control group were analyzed by three-dimensional cephalometry. The accuracy of VSP in L-shaped reduction malarplasty was evaluated by comparing the preoperative design model with the actual postoperative model in the digital group. The statistical analyses were conducted using SPSS 24.0 software. The chi-square test was used in the comparison of surgical complications and patient satisfaction rates. The symmetry of bilateral landmarks in the three-dimensional direction between the two groups was evaluated using the independent t-test, and the pre- and post-operative measurements in the digital group were compared using paired t-test. Results:A total of 78 patients were included, with 36 in the digital group, aged (25.2±3.6) years, and 42 in the control group, aged (24.3±2.8) years. Satisfactory reduction of zygomatic protrusion or hypertrophy was recognized among all patients. Compared with the control group, the digital group had lower percentage of complications [25% (9/36) vs. 55% (23/42)] and higher postoperative satisfaction [78% (28/36) vs. 48% (20/42)], both of which were statistically significant (all P<0.01). Regarding the symmetry of bilateral zygomatic complexes, the average deviations of ΔZb (bottom point of zygoma) in the digital group in the horizontal, vertical, and sagittal directions [(1.05±0.24), (1.05±0.24), (1.00±0.88) mm] were significantly smaller than those in the control group [(2.03±0.58), (1.32±0.68), (1.47±0.47) mm], with statistically significant differences (all P<0.05). The bone segment movements of virtual plans and actual result in the digital surgery group were measured and showed no obvious difference for the inward movement [(5.42±0.98) mm vs. (5.33±0.93) mm] and the sagittal overlap [(4.87±1.21) mm vs. (4.77±1.32) mm] at the zygoma roots, along with the step length at the long-arm of the L-shaped osteotomy line [(2.43±1.11) mm vs. (2.39±0.89) mm] (all P>0.05). The mean differences of facial width and protrusion measurements between virtual simulations and actual result in the digital group ranged from (1.13±0.47) mm to (2.07±0.88) mm, with no significant differences( P>0.05). Meanwhile, the high resemblance between virtual plans and actual result was depicted via superimposition models, with a deviation controlled within ±0.5 mm. Conclusion:The application of VSP in reduction malarplasty significantly improved surgical accuracy and reduced difficulties in the operation, which would improve patients’ postoperative satisfaction.

Objective To understand the current status of the job competency of full-time healthcare-associated in-fection(HAI)management professionals in all levels and types of medical institutions across China,and provide in-formation and basis for professional training,competency improvement,and career planning.Methods The strati-fied sampling method was adopted to select HAI management professionals from medical institutions in 31 provin-cial-level administrative regions across the country as the research subjects.The designed content of questionnaire involved four parts,including the surveyed personnel's basic information,daily job competency assessment,satis-faction level towards the job,as well as opinions and suggestions on the management of full-time HAI management professionals.The assessment on daily job competency was divided into 13 dimensions,ranging from very incompe-tent to very competent in 5 levels.The scores of HAI management professionals with different professional back-grounds were compared and analyzed.Results A total of 8 709 valid questionnaires were collected,with 3 475 and 3 697 surveyed personnel from tertiary and secondary medical institutions,respectively,and 1 537 from primary or unclassified medical institutions.The overall average score for the competency assessment of full-time HAI manage-ment professionals was(4.17±0.80)points.The scores of professionals with different professional backgrounds,from high to low,were as follows:nursing([4.12±0.81]points),clinical medicine([4.07±0.86]points),pre-ventive medicine([3.93±0.92]points),laboratory medicine([3.88±0.93]points),pharmacy([3.86±0.94]points),and health management([3.85±0.95]points).For the core competency of HAI management professio-nals,such as monitoring and analyzing HAI cases,identifying and investigating HAI outbreaks,the assessment scores for professionals with medical backgrounds were the highest(both P＜0.05).For the basic work of HAI prevention and control,such as checking and guiding the implementation of rules and regulations,guiding occupa-tional protection,management and communication,and implementing HAI management training,professionals with a nursing background had the highest assessment scores(all P＜0.05).Full-time HAI management professionals were relatively satisfied with their training,while those with a background in preventive medicine had lower satisfac-tion with their training,career development,and job benefits(all P＜0.05).Conclusion There are significant differences in the competency of HAI management professionals with different professional backgrounds.It is nece-ssary to optimize division of labor and leverage the strengths,providing ideas and models for promoting the construction of a specialized and professional HAI management team.

Objective:To evaluate the accuracy of L-shaped reduction malarplasty under the guidance of virtual surgical planning (VSP).Methods:The data of adult female patients who were diagnosed with zygomatic protrusion or hypertrophy at Department of Orthognathic and Temporo-mandibular Joint Surgery, West China Hospital of Stomatology, Sichuan University, from January 2018 to December 2020 were analyzed retrospectively. L-shaped reduction malarplasty with or without bone resection and with the mortice and tenon joint structure on the zygomatic arch was conducted either by digital procedures comprising VSP and three-dimensional printing titanium templates (digtal surgery group) or by conventional method (control group). The incidence of postoperative complications and the patient postoperative satisfaction [using a Likert scale with a score ranging from 1 to 5, representing very dissatisfied, dissatisfied, average, satisfied and very satisfied, satisfaction rate = (very satisfied + satisfied)/ total number of patients × 100%] were statistically analyzed in the two groups. The differences in the postoperative symmetry of the zygomatic complex between the digital group and the control group were analyzed by three-dimensional cephalometry. The accuracy of VSP in L-shaped reduction malarplasty was evaluated by comparing the preoperative design model with the actual postoperative model in the digital group. The statistical analyses were conducted using SPSS 24.0 software. The chi-square test was used in the comparison of surgical complications and patient satisfaction rates. The symmetry of bilateral landmarks in the three-dimensional direction between the two groups was evaluated using the independent t-test, and the pre- and post-operative measurements in the digital group were compared using paired t-test. Results:A total of 78 patients were included, with 36 in the digital group, aged (25.2±3.6) years, and 42 in the control group, aged (24.3±2.8) years. Satisfactory reduction of zygomatic protrusion or hypertrophy was recognized among all patients. Compared with the control group, the digital group had lower percentage of complications [25% (9/36) vs. 55% (23/42)] and higher postoperative satisfaction [78% (28/36) vs. 48% (20/42)], both of which were statistically significant (all P<0.01). Regarding the symmetry of bilateral zygomatic complexes, the average deviations of ΔZb (bottom point of zygoma) in the digital group in the horizontal, vertical, and sagittal directions [(1.05±0.24), (1.05±0.24), (1.00±0.88) mm] were significantly smaller than those in the control group [(2.03±0.58), (1.32±0.68), (1.47±0.47) mm], with statistically significant differences (all P<0.05). The bone segment movements of virtual plans and actual result in the digital surgery group were measured and showed no obvious difference for the inward movement [(5.42±0.98) mm vs. (5.33±0.93) mm] and the sagittal overlap [(4.87±1.21) mm vs. (4.77±1.32) mm] at the zygoma roots, along with the step length at the long-arm of the L-shaped osteotomy line [(2.43±1.11) mm vs. (2.39±0.89) mm] (all P>0.05). The mean differences of facial width and protrusion measurements between virtual simulations and actual result in the digital group ranged from (1.13±0.47) mm to (2.07±0.88) mm, with no significant differences( P>0.05). Meanwhile, the high resemblance between virtual plans and actual result was depicted via superimposition models, with a deviation controlled within ±0.5 mm. Conclusion:The application of VSP in reduction malarplasty significantly improved surgical accuracy and reduced difficulties in the operation, which would improve patients’ postoperative satisfaction.

Objective:To analyze the association between zygomatic change and bone setback or resection and propose a quantitative guidance for L-shaped reduction malarplasty by linear regression analysis based on computed tomographic (CT) scan images.Methods:A retrospective observational study was conducted on patients who underwent L-shaped reduction malarplasty with mortice and tenon joint at the zygomatic arch in Department of Orthognathic and Temporomandibular Joint Surgery, West China Hospital of Stomatology, Sichuan University from January 2017 to September 2022. Bone setback and resection were performed in cases required a classical L-shaped osteoectomy with oblique bone resection (Group Ⅰ). Bone setback was performed in cases required a modified L-shaped osteotomy without bone resection (Group Ⅱ). Wound healing and the occurrence of complications were followed up after operation. The amount of bone setback and resection were calculated by using preoperative and postoperative CT scan images. The unilateral width changes of the anterior, middle, and posterior zygomatic regions(ΔZBP-MFP, ΔZMP-MFP, ΔZAP-MFP, respectively) as well as zygomatic protrusion change(Δzygomatic protrusion) were also evaluated. SPSS 20.0 software was used for statistical analysis. The measurement data was expressed as Mean±SD. Zygomatic width and protrusion change of the two groups was compared by independent t-test. Comparison of complication rates between the two groups was performed using the χ2 test. Correlation analysis using Pearson correlation coefficients was performed between bone resection or setback and zygomatic width or protrusion change. Linear regression analysis was also performed. Results:A total of 80 patients were enrolled. Group Ⅰ consisted of 40 patients [6 males and 34 females; aged (25.2±3.8) years, ranging from 19 to 33 years] who underwent a classical L-shaped osteotomy with both bone setback and resection, while Group Ⅱ consisted of 40 patients [10 males and 30 females; aged (26.0±3.0) years, ranging from 20 to 35 years] who underwent a modified L-shaped osteotomy with bone setback but without bone resection. All patients healed uneventfully during the follow-up period[(12.5±3.3) months, ranging from 5 to 20 months]. There was no significant difference in the incidence of complications such as infection, transient paresthesia, severe swelling and hematoma between the two groups ( P>0.05). No severe complications, such as facial asymmetry, sagging cheek, bone nonunion, were observed. All patients significantly improved facial contours. There was a statistically significant difference (all P<0.01) in ΔZBP-MFP [ (2.52±0.76) mm vs. (1.85±0.40) mm], ΔZMP-MFP [ (3.30±0.54) mm vs. (2.94±0.51) mm] and Δzygomatic protrusion [ (4.42±1.20) mm vs. (3.59±0.84) mm] between Group Ⅰ and Group Ⅱ. No statistical difference was found in ΔZAP-MFP ( P>0.05). Significant correlation was observed between the bone setback or resection and the changes of anterior, middle zygomatic width as well as protrusion in both the two groups ( r=0.60-0.92, all P<0.01), and the linear regression equation was established. The correlation between bone setback or resection and the posterior zygomatic width change was not significant ( P>0.05). Conclusion:There are linear correlations between the unilateral anterior, middle zygomatic width change, zygomatic protrusion change and the unilateral bone setback or resection. The linear regression equations can be used as a quantitative guidance for preoperative surgical planning.

Objective To predict the potential geographic distribution of Oncomelania hupensis in Yunnan Province using random forest (RF) and maximum entropy (MaxEnt) models, so as to provide insights into O. hupensis surveillance and control in Yunnan Province. Methods The O. hupensis snail survey data in Yunnan Province from 2015 to 2016 were collected and converted into O. hupensis snail distribution site data. Data of 22 environmental variables in Yunnan Province were collected, including twelve climate variables (annual potential evapotranspiration, annual mean ground surface temperature, annual precipitation, annual mean air pressure, annual mean relative humidity, annual sunshine duration, annual mean air temperature, annual mean wind speed, ≥ 0 ℃ annual accumulated temperature, ≥ 10 ℃ annual accumulated temperature, aridity and index of moisture), eight geographical variables (normalized difference vegetation index, landform type, land use type, altitude, soil type, soil textureclay content, soil texture-sand content and soil texture-silt content) and two population and economic variables (gross domestic product and population). Variables were screened with Pearson correlation test and variance inflation factor (VIF) test. The RF and MaxEnt models and the ensemble model were created using the biomod2 package of the software R 4.2.1, and the potential distribution of O. hupensis snails after 2016 was predicted in Yunnan Province. The predictive effects of models were evaluated through cross-validation and independent tests, and the area under the receiver operating characteristic curve (AUC), true skill statistics (TSS) and Kappa statistics were used for model evaluation. In addition, the importance of environmental variables was analyzed, the contribution of environmental variables output by the models with AUC values of > 0.950 and TSS values of > 0.850 were selected for normalization processing, and the importance percentage of environmental variables was obtained to analyze the importance of environmental variables. Results Data of 148 O. hupensis snail distribution sites and 15 environmental variables were included in training sets of RF and MaxEnt models, and both RF and MaxEnt models had high predictive performance, with both mean AUC values of > 0.900 and all mean TSS values and Kappa values of > 0.800, and significant differences in the AUC (t = 19.862, P < 0.05), TSS (t = 10.140, P < 0.05) and Kappa values (t = 10.237, P < 0.05) between two models. The AUC, TSS and Kappa values of the ensemble model were 0.996, 0.954 and 0.920, respectively. Independent data verification showed that the AUC, TSS and Kappa values of the RF model and the ensemble model were all 1, which still showed high performance in unknown data modeling, and the MaxEnt model showed poor performance, with TSS and Kappa values of 0 for 24%(24/100) of the modeling results. The modeling results of 79 RF models, 38 MaxEnt models and their ensemble models with AUC values of > 0.950 and TSS values of > 0.850 were included in the evaluation of importance of environmental variables. The importance of annual sunshine duration (SSD) was 32.989%, 37.847% and 46.315% in the RF model, the MaxEnt model and their ensemble model, while the importance of annual mean relative humidity (RHU) was 30.947%, 15.921% and 28.121%, respectively. Important environment variables were concentrated in modeling results of the RF model, dispersed in modeling results of the MaxEnt model, and most concentrated in modeling results of the ensemble model. The potential distribution of O. hupensis snails after 2016 was predicted to be relatively concentrated in Yunnan Province by the RF model and relatively large by the MaxEnt model, and the distribution of O. hupensis snails predicted by the ensemble model was mostly the joint distribution of O. hupensis snails predicted by RF and MaxEnt models. Conclusions Both RF and MaxEnt models are effective to predict the potential distribution of O. hupensis snails in Yunnan Province, which facilitates targeted O. hupensis snail control.

Schistosomiasis was once hyper-endemic in Yunnan Province. Following concerted efforts for over 70 years, remarkable achievements have been made for schistosomiasis control in the province. In 2004, the Mid- and Long-term Plan for Schistosomiasis Prevention and Control in Yunnan Province was initiated in Yunnan Province, and the target for transmission control of schistosomiasis was achieved in the province in 2009. Following the subsequent implementation of the Outline for Key Projects in Integrated Schistosomiasis Control Program (2009—2015) and the 13th Five - year Plan for Schistosomiasis Control in Yunnan Province, no acute schistosomiasis had been identified in Yunnan Province for successive 12 years, and no local Schistosoma japonicum infections had been detected in humans, animals or Oncomelania hupensis snails for successive 6 years in the province by the end of 2020. The transmission of schistosomiasis was interrupted in Yunnan Province in 2020. This review summarizes the history of schistosomiasis, changes in schistosomiasis prevalence and progress of schistosomiasis control in Yunnan Province, and proposes the future priorities for schistosomiasis control in the province.