Peritoneal dialysis (PD) is a crucial renal replacement therapy for end-stage renal disease (ESRD), offering significant advantages as high flexibility, hemodynamic stability, and high cost-effectiveness. However, prolonged exposure to intra-abdominal dialysate may predispose to the mechanical complication of abdominal external hernia. Abdominal external hernia may lead to various adverse clinical outcomes. In severe cases, it can progress to incarceration or even rupture, ultimately necessitating discontinuation of the therapy. The authors systematically review PD-associated abdominal external hernias, including their clinical landscape, risk factors, surgical treatment strategies and prognostic determinants. They also assess the effects of hernia repair on residual renal function, aiming to provide references for clinical decision-making.

Objective To establish a simplified simulation method of rocking-chair archwire(RCA),explore the biomechanical effect of RCA during anterior teeth retraction with sliding mechanics,and provide guidance for clinical treatment.Methods A standard 0.019 in×0.025 in(0.483 mm×0.635 mm)labial archwire was imported into ANSYS software and preloaded spring was used to simulate RCA at different angles to achieve parameterized modeling.A three-dimensional(3D)finite element model with labial straight wire appliance,teeth,periodontium and maxillary bone was established to analyze the displacement and force of anterior/posterior teeth under 1.5 N intra-arch traction combined with RCA at different angles.Results Preloading forces of 1.5,3,4.5,and 6 N in spring induced angles of approximately 5°,10°,15°,and 20° for RCA,demonstrating the flexibility and convenience of the parameterized modeling method.During intra-arch traction with increased angle of RCA,lingual crown displacement of the middle incisor gradually decreased,while the lateral incisor and canine showed decreased crown tipping and increased lingual root displacement;when the RCA angle was 20°,the lateral incisor and canine achieved almost bodily retraction.Meanwhile,premolars showed an extrusion tendency,while molars demonstrated distal crown tipping and intrusion tendency.As the RCA angle increased from 0° to 20°,intrusive force on the anterior teeth increased,and the moment-force ratio(M/F)at bracket level increased from 0 to near 9 mm.Conclusions RCA can effectively control the moving pattern of the maxillary anterior teeth and prevent their over-erection and extrusion during retraction with sliding mechanics.During intra-arch traction with rigid stainless steel archwire,theoretically RCA of 20° has sufficient torque control on the anterior teeth to achieve their en-masse retraction.

Image 1.

Peritoneal dialysis (PD) is a crucial renal replacement therapy for end-stage renal disease (ESRD), offering significant advantages as high flexibility, hemodynamic stability, and high cost-effectiveness. However, prolonged exposure to intra-abdominal dialysate may predispose to the mechanical complication of abdominal external hernia. Abdominal external hernia may lead to various adverse clinical outcomes. In severe cases, it can progress to incarceration or even rupture, ultimately necessitating discontinuation of the therapy. The authors systematically review PD-associated abdominal external hernias, including their clinical landscape, risk factors, surgical treatment strategies and prognostic determinants. They also assess the effects of hernia repair on residual renal function, aiming to provide references for clinical decision-making.

Objective:To investigate the impact of four registration methods on the accuracy of virtual occlusal records (VOR) in intraoral scanning for implant restorations with multiple missing teeth.Methods:A mandibular model simulating clinical conditions with multiple missing teeth (right first molar, left second premolar, left first molar, left second molar) and a maxillary compete dentition model were mounted on a semi-adjustable articulator. Subsequently, twelve 0.5 mm stainless steel spheres were adhered to reference positions (16, 46, 13, 43, 23, 33, 25, 35, 26, 36, 27, 37) as fiducial markers. Following this, a laboratory scanner generated reference datasets by digitizing the models in maximum intercuspation (MIP). Meanwhile, ten maxillary and mandibular scans were acquired using an intraoral scanner, with all nonarticulated scans duplicated four times to ensure data consistency. Forty VOR intraoral scans were performed in MIP using four registration protocols: left-side, right-side, anterior, and bilateral registration ( n=10 per group), randomized via a computer-generated pseudo-random sequence. For measurement, linear distances (D16-46, D13-43, D23-33, D25-35, D26-36, D27-37, D16-46 represented the single-tooth defect position, whereas D25-35, D26-36, D27-37 reflected positions in free-end edentulism areas) between opposing markers were measured in a reverse engineering software, with deviations (ΔD) from the reference scan calculated to assess accuracy. Specifically, negative ΔD values indicated vertical dimension underestimation. Given that non-normally distributed data were analyzed using medians [interquartile ranges (IQR)], trueness (median ΔD) and precision (IQR) were evaluated. The interaction effect between the registration method and the position of the measurement items was evaluated by using the generalized linear model. The accuracy was compared overall by the Kruskal-Wallis test with the two-sided significance level of α=0.05. For pairwise comparisons, post-hoc tests were conducted by Dunn′s t-test with the Bonferroni correction for the significance level. Results:The accuracy of VOR was affected by registration method ( P<0.05), with a significant position×registration method interaction observed ( P<0.05). In particular, in all four groups, only the bilateral registration group showed trueness of less than 0.1 mm for both free-end edentulism and the single tooth defect, with ΔD16-46, ΔD25-35, ΔD26-36, and ΔD27-37 being 0.059 (0.015), -0.082 (0.052), -0.065 (0.032), -0.070 (0.050) mm, respectively. Moreover, trueness in free-end edentulism showed negative values across all groups, with the largest negative deviations observed in the right-side registration group, with ΔD25-35, ΔD26-36 and ΔD27-37 being -0.410 (0.174), -0.442 (0.225), -0.439 (0.262) mm, respectively. Conclusions:In fully digital workflows of implant restorations for mandibular free-end edentulism with multiple missing teeth, registration method critically influences VOR accuracy. While four registration methods exhibited underestimation of occlusal vertical dimension, bilateral registration achieved the highest accuracy.

Objective To establish a simplified simulation method of rocking-chair archwire(RCA),explore the biomechanical effect of RCA during anterior teeth retraction with sliding mechanics,and provide guidance for clinical treatment.Methods A standard 0.019 in×0.025 in(0.483 mm×0.635 mm)labial archwire was imported into ANSYS software and preloaded spring was used to simulate RCA at different angles to achieve parameterized modeling.A three-dimensional(3D)finite element model with labial straight wire appliance,teeth,periodontium and maxillary bone was established to analyze the displacement and force of anterior/posterior teeth under 1.5 N intra-arch traction combined with RCA at different angles.Results Preloading forces of 1.5,3,4.5,and 6 N in spring induced angles of approximately 5°,10°,15°,and 20° for RCA,demonstrating the flexibility and convenience of the parameterized modeling method.During intra-arch traction with increased angle of RCA,lingual crown displacement of the middle incisor gradually decreased,while the lateral incisor and canine showed decreased crown tipping and increased lingual root displacement;when the RCA angle was 20°,the lateral incisor and canine achieved almost bodily retraction.Meanwhile,premolars showed an extrusion tendency,while molars demonstrated distal crown tipping and intrusion tendency.As the RCA angle increased from 0° to 20°,intrusive force on the anterior teeth increased,and the moment-force ratio(M/F)at bracket level increased from 0 to near 9 mm.Conclusions RCA can effectively control the moving pattern of the maxillary anterior teeth and prevent their over-erection and extrusion during retraction with sliding mechanics.During intra-arch traction with rigid stainless steel archwire,theoretically RCA of 20° has sufficient torque control on the anterior teeth to achieve their en-masse retraction.

Objective:To investigate the impact of four registration methods on the accuracy of virtual occlusal records (VOR) in intraoral scanning for implant restorations with multiple missing teeth.Methods:A mandibular model simulating clinical conditions with multiple missing teeth (right first molar, left second premolar, left first molar, left second molar) and a maxillary compete dentition model were mounted on a semi-adjustable articulator. Subsequently, twelve 0.5 mm stainless steel spheres were adhered to reference positions (16, 46, 13, 43, 23, 33, 25, 35, 26, 36, 27, 37) as fiducial markers. Following this, a laboratory scanner generated reference datasets by digitizing the models in maximum intercuspation (MIP). Meanwhile, ten maxillary and mandibular scans were acquired using an intraoral scanner, with all nonarticulated scans duplicated four times to ensure data consistency. Forty VOR intraoral scans were performed in MIP using four registration protocols: left-side, right-side, anterior, and bilateral registration ( n=10 per group), randomized via a computer-generated pseudo-random sequence. For measurement, linear distances (D16-46, D13-43, D23-33, D25-35, D26-36, D27-37, D16-46 represented the single-tooth defect position, whereas D25-35, D26-36, D27-37 reflected positions in free-end edentulism areas) between opposing markers were measured in a reverse engineering software, with deviations (ΔD) from the reference scan calculated to assess accuracy. Specifically, negative ΔD values indicated vertical dimension underestimation. Given that non-normally distributed data were analyzed using medians [interquartile ranges (IQR)], trueness (median ΔD) and precision (IQR) were evaluated. The interaction effect between the registration method and the position of the measurement items was evaluated by using the generalized linear model. The accuracy was compared overall by the Kruskal-Wallis test with the two-sided significance level of α=0.05. For pairwise comparisons, post-hoc tests were conducted by Dunn′s t-test with the Bonferroni correction for the significance level. Results:The accuracy of VOR was affected by registration method ( P<0.05), with a significant position×registration method interaction observed ( P<0.05). In particular, in all four groups, only the bilateral registration group showed trueness of less than 0.1 mm for both free-end edentulism and the single tooth defect, with ΔD16-46, ΔD25-35, ΔD26-36, and ΔD27-37 being 0.059 (0.015), -0.082 (0.052), -0.065 (0.032), -0.070 (0.050) mm, respectively. Moreover, trueness in free-end edentulism showed negative values across all groups, with the largest negative deviations observed in the right-side registration group, with ΔD25-35, ΔD26-36 and ΔD27-37 being -0.410 (0.174), -0.442 (0.225), -0.439 (0.262) mm, respectively. Conclusions:In fully digital workflows of implant restorations for mandibular free-end edentulism with multiple missing teeth, registration method critically influences VOR accuracy. While four registration methods exhibited underestimation of occlusal vertical dimension, bilateral registration achieved the highest accuracy.

In recent years, with being gradually developed, three-dimensional (3D) reconstruction based on pathology and medical imaging technology has shown certain value in the diagnosis and treatment of breast cancer. And with its advantages of providing the spatial location, morphological structure and 3D structure relationships with the surrounding tissues and organs, 3D reconstruction technology has played a key role in the early diagnosis, surgical treatment, and accurate evaluation of the treatment effect after surgery of breast cancer. Although the application of 3D reconstruction technology based on pathology and medical imaging is still inadequate, with the continuous development of science and technology, 3D reconstruction technology will play an increasingly important role in the diagnosis, personalized treatment and prognosis assessment of breast cancer.

Objective: To establish a quantitative three-dimensional method based on intraoral scan and apply it to evaluation of the facial soft tissue contour alterations following single immediate implant and immediate provisionalization (IIPP) in central incisor via intraoral scanning. Methods: This study was a prospective clinical study. The trial was conducted at Department of Implantology, Peking University School and Hospital of Stomatology, from January 2016 to September 2017. Twenty-nine eligible consecutive patients (15 women, 14 men) with a mean age of (34.3±12.0) were included and received immediate replacement of the failure maxillary single central incisor. A screw-retained immediate restoration was delivered for each patient. At 6-month follow-up, impression was taken and a screw-retained permanent restoration was performed for each patient. The anterior maxillary region was scanned by an intraoral scanning system at pre-surgery and 1-year follow-up. The Standard Tessellation Language (STL) files were output to a dedicated software and superimposed. Mid-facial recession and gingival zenith symmetry at 1-year follow-up were measured in the digital models. Three-dimensional configurations of the contour change volume were calculated and reconstructed for visual analysis. Furthermore, the following parameters were used to analyze the reconstructed volume: mean contour change in thickness (△d), mesio-distal width (D_W), coronal-apical height (D_H), contour change at 0, 1, 2, 3, 4, 5 mm apical to the free gingival margin on the implant site. Results: Twenty-seven out of twenty-nine enrolled patients were finally available for analysis. At 1-year follow-up, the mid-facial mucosa level at implant site was (0.23±0.39) mm apical to the gingival zenith of the contralateral tooth. In general, a contour collapse was found in every patient. △d, D_W and D_H of the collapsed volume were (0.62±0.22), (11.03±1.74) and (6.82±1.52) mm, respectively. Contour change at 0, 1, 2, 3, 4, 5 mm apical to the free gingival margin on the implant site were (0.54±0.48), (0.87±0.62), (1.03±0.46), (0.96±0.52), (0.90±0.52), (0.89±0.57) mm. Conclusions The described quantitative measurement based on intraoral scan can be an effective method for assessment of soft tissue contour changes. At 1 year following single IIPP treatment in maxillary incisor, free gingival margin is stable, with only mild recession. The mean level of the facial soft tissue contour collapse is 0.62 mm.

Objective To study the expression and clinical significance of Mybl2 in Cervical tissues.Methods 74 cases of cervical tissues were obtained from the department of obstetrics and gynecology.The expression level of Mybl2 was detected by Elisa method,and the relationship with clinical pathology was analyzed.Results Elisa results showed that the expression of Mybl2 was significant among inflammation,CINⅠ,CINⅡ,CINⅢ and ICC groups (F=27.39,P＜0.05).The expression level of Mybl2 was higher in the older group that the younger one which were in the same clinical pathology degree,but it was not was significant(P＞0.05).Conclusion The expression levels of Mybl2 were related with the pathological changes of cervix.Disturb expression level of Mybl2 maybe induce the development of cervical cancer.