ObjectiveTo analyze the differences in color， odor and volatile components of Citri Reticulatae Pericarpium（CRP） before and after being stir-fried with Halloysitum Rubrum， and to explore the material basis of enhancing the effect of strengthening spleen after processing and the scientific connotation of decoction pieces processed with Halloysitum Rubrum as the auxiliary material. MethodsThe volatile components of the samples before and after processing were identified and relatively quantified by headspace gas chromatography-mass spectrometry（HS-GC-MS）， and the volatile components were analyzed by principal component analysis（PCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA）. According to the principle of variable importance in the projection（VIP） value>1.5， volatile differential components before and after processing were screened. And combined with intelligent sensory technologies such as colorimeter and electronic nose， the chroma and odor information of CRP before and after being stir-fried with Halloysitum Rubrum were identified. Pearson correlation analysis was used to explore the correlation between volatile differential components and chroma values. ResultsA total of 112 volatile components were identified from CRP and CRP stir-fried with Halloysitum Rubrum， of which 84 were from CRP and 97 were from CRP stir-fried with Halloysitum Rubrum. And 7 differential components were selected， including α-pinene， β-myrcene， linalool， sabinene， ocimene isomer mixture， A-ocimene， and δ-elemene. After being processed with Halloysitum Rubrum， the brightness value（L^*）， yellow-blue value（b^*） and total chromatic value（E^*_ab） of CRP were decreased（P<0.01）， and red-green value（a^*） was increased（P<0.01）， the response values of S4， S5， S10 and S13 sensors were significantly increased（P<0.05）， and the response values of S3 and S8 sensors were significantly decreased（P<0.05）. Correlation analysis showed that α-pinene and β-myrcene were negatively correlated with L^* and E^*_ab， but positively correlated with a^*. Sabinene was positively correlated with L^* and E^*_ab. Linalool was positively correlated with L^* and E^*_ab， and negatively correlated with a^*. The ocimene isomer mixture was positively correlated with the L^*. ConclusionAfter being processed with Halloysitum Rubrum， the appearance color， odor and volatile components of CRP change significantly， and α-pinene， β-myrcene， sabinene， linalool and A-ocimene are the characteristic volatile components before and after processing， which can provide references for the quality evaluation and clinical application of CRP and its processed products.

ObjectiveTo analyze the differences in color， odor and volatile components of Citri Reticulatae Pericarpium（CRP） before and after being stir-fried with Halloysitum Rubrum， and to explore the material basis of enhancing the effect of strengthening spleen after processing and the scientific connotation of decoction pieces processed with Halloysitum Rubrum as the auxiliary material. MethodsThe volatile components of the samples before and after processing were identified and relatively quantified by headspace gas chromatography-mass spectrometry（HS-GC-MS）， and the volatile components were analyzed by principal component analysis（PCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA）. According to the principle of variable importance in the projection（VIP） value>1.5， volatile differential components before and after processing were screened. And combined with intelligent sensory technologies such as colorimeter and electronic nose， the chroma and odor information of CRP before and after being stir-fried with Halloysitum Rubrum were identified. Pearson correlation analysis was used to explore the correlation between volatile differential components and chroma values. ResultsA total of 112 volatile components were identified from CRP and CRP stir-fried with Halloysitum Rubrum， of which 84 were from CRP and 97 were from CRP stir-fried with Halloysitum Rubrum. And 7 differential components were selected， including α-pinene， β-myrcene， linalool， sabinene， ocimene isomer mixture， A-ocimene， and δ-elemene. After being processed with Halloysitum Rubrum， the brightness value（L^*）， yellow-blue value（b^*） and total chromatic value（E^*_ab） of CRP were decreased（P<0.01）， and red-green value（a^*） was increased（P<0.01）， the response values of S4， S5， S10 and S13 sensors were significantly increased（P<0.05）， and the response values of S3 and S8 sensors were significantly decreased（P<0.05）. Correlation analysis showed that α-pinene and β-myrcene were negatively correlated with L^* and E^*_ab， but positively correlated with a^*. Sabinene was positively correlated with L^* and E^*_ab. Linalool was positively correlated with L^* and E^*_ab， and negatively correlated with a^*. The ocimene isomer mixture was positively correlated with the L^*. ConclusionAfter being processed with Halloysitum Rubrum， the appearance color， odor and volatile components of CRP change significantly， and α-pinene， β-myrcene， sabinene， linalool and A-ocimene are the characteristic volatile components before and after processing， which can provide references for the quality evaluation and clinical application of CRP and its processed products.

By consulting relevant literature of ancient herbal books and processing specifications， this paper made a systematic research and analysis of Ostreae Concha， including the name， producing area， harvesting， quality， historical evolution of processing， relevant processing specifications， modern processing technology， and changes in chemical composition and pharmacological effects before and after processing， in order to provide documentary evidence for the research on processing technology and the establishment of quality standards. According to the textual research， it is known that Ostreae Concha has a long history of being used in medicine， and there have been many aliases and local names in each historical period. Shennong's Classic of the Materia Medica（Shennong Bencaojing） began to use Muli as the correct name， which has continued to use to today， and there were also aliases such as Muge， Zuogu Muli and Haoke. Ostreae Concha has a wide range of localities and irregular harvesting periods. The ancients believed that its left shell was of superior quality， but this has not been seen in modern. And there were many kinds of processing methods of Ostreae Concha， such as grinding， roasting， calcining， frying， simmering， quenching and so on， and the calcining was still in use. The different editions of Chinese Pharmacopoeia from 1963 to 2020 contain only calcined Ostreae Concha， and the local processing specifications mainly include three kinds of processed products（calcined products， salt-soaked products and vinegar-soaked products）. Modern processing research mainly focuses on process optimization， changes in chemical composition and pharmacological effects， and the research methods are relatively single. Overall， there are currently issues such as inconsistent processing standards， unclear process parameters and imperfect quality standards， which are not conducive to the quality control and standardized clinical use of Ostreae Concha. Therefore， it is necessary to further investigate the pharmacological substance basis of Ostreae Concha and its processed products in order to elucidate the processing mechanism， standardize the processing technology and improve the quality standard.

BACKGROUND:The healing of mandibular fractures after rigid internal fixation is influenced by many factors,including the material of the bone plate,fracture site,and bone density of the patient.However,there are relatively few studies on the relationship between the stability of mandibular fracture fixation in different bone qualities and they lack a scientific basis. OBJECTIVE:To analyze the stability of fixation of mandibular fractures with different bone qualities with bioabsorbable plates and miniature titanium plates by finite element analysis. METHODS:Three-dimensional finite element models of class Ⅰ-Ⅳ mandibular fractures were developed according to the bone quality classification method proposed by ZARB and LEKHOLM.The fractures at the median mandibular symphysis,mandibular body,and mandibular angle were simulated under different bone qualities.Bioabsorbable bone grafting plates(or miniature titanium plates)were placed at each fracture site for fixation and to simulate the state of healthy side occlusion.Finite element analysis on the model was used to analyze the relative displacement of the fracture segments and the stress distribution of fixators. RESULTS AND CONCLUSION:(1)The maximum stress value during fixation with titanium plates increased gradually with the increase of bone class,in which the maximum stress value of titanium plates was the highest in the mandibular body class Ⅳ bone group,which was 382.74 MPa and 96.11 MPa in the miniature titanium plate and bioabsorbable plate groups.The results for mandibles of the same bone type showed that the maximum stress value of titanium plates was much higher than that of bioabsorbable plates.(2)For fractures of the median middle of the mandible in types Ⅲ and Ⅳ,the displacement of the fracture breaks at the fixation site was large and exceeded the limiting value of bone healing(>150 μm),regardless of whether the fixation was performed with a miniature titanium plate or a bioabsorbable plate.For type Ⅳ mandibular fractures,the fracture end displacement in the bioabsorbable plate group exceeded the healing limit value,and the fracture end displacement in the miniature titanium plate group was close to the healing limit value.Under the same bone quality and fracture site,the fracture displacement of the miniature titanium plate group was smaller than that of the bioabsorbable plate group.(3)The results showed that the strength and stiffness of the two internal fixations were sufficient to support bone healing of fractures at three sites of the types Ⅰ-Ⅳ mandible,and the fixation stability of the bioabsorbable plate was almost the same as that of the miniature titanium plate,which could provide early healing conditions for fractures.Mandibular bone type should be taken into consideration in the treatment of mandibular fracture.The higher the mandibular bone grade,the worse the stability of fracture fixation,and the more likely the complications such as poor bone healing will occur after surgery.

BACKGROUND:Socket-shield technique can effectively maintain labial soft and hard tissues,but the incidence of postoperative complications such as exposure and displacement of root shield is relatively high.It is speculated that the root shield may be exposed and displaced due to excessive load after long-term function of dental implants. OBJECTIVE:Through three-dimensional finite element analysis,we aim to study the influence of varying root shield thicknesses on the stress distribution,equivalent stress peaks,and displacement in the root shield,periodontal ligaments,implant,and surrounding alveolar bone under normal occlusal loading.We also attempt to analyze the correlation between the thickness of the root shield and occurrence of mechanical events such as root shield exposure,displacement,and fracture. METHODS:Cone-beam CT data of a patient who met the indication standard of socket-shield technique for maxillary central incisor were retrieved from database.Reverse engineering techniques were used to build models of the maxillary bone and root shield,while forward engineering was used to create models for the implant components based on their parameters.Models depicting various root shield thicknesses(0.5,1.0,1.5,and 2.0 mm)were created using Solidworks 2022 software.ANSYS Workbench 2021 software was then used to simulate and analyze the effects of varying root shield thicknesses on stress distribution,equivalent stress peaks,and displacement of the root shields,periodontal ligaments,implants,and surrounding alveolar bone under normal occlusion. RESULTS AND CONCLUSION:(1)In all root shield models,the stress was concentrated on the palatal cervical side,both sides of the edges and the lower edge of the labial side.As the thickness of the root shield increased,the equivalent stress peak and displacement showed a decreasing trend.The 0.5 mm thickness model produced a stress concentration of 176.20 MPa,which exceeded the yield strength(150 MPa)of tooth tissue.(2)The periodontal ligament stress in each group was concentrated in the neck margin and upper region.With the increase of root shield thickness,the equivalent stress peak and displacement of periodontal ligament showed a decreasing trend.(3)Implant stress in all models was concentrated in the neck of the implant and the joint of the implant-repair abutment,and the labial side was more concentrated than the palatal side.With the increase of root shield thickness,the equivalent stress peak of the implant in the model showed an increasing trend.(4)In each group of models,stress of cortical bone concentrated around the neck of the implant and the periphery of the root shield,and the labial side was more concentrated than the palatal side.With the increase of the thickness of the root shield,the equivalent stress peak around the root shield decreased;the peak value of the equivalent stress of the bone around the neck of the implant showed an increasing trend.In the model,the stress of cancellous bone was mainly concentrated around the neck of the lip of the implant,the top of the thread,the root tip and the lower margin of the root shield,and the labial side was more concentrated than the palatal side.With the increase of the thickness of the root shield,the peak value of the equivalent stress of the bone around the root shield in the model showed a decreasing trend.The minimum principal stress of cortical bone in each group of models was concentrated around the neck of the implant,exhibiting a fan-shaped distribution.As the thickness of the root shield increased,the minimum principal stress of cortical bone showed an increasing trend.(5)These results indicate that different thicknesses of the root shield have different biomechanical effects.The root shield with a thickness of 0.5 mm is easy to fracture.For patients with sufficient bone width,the root shield with a thickness of 2.0 mm is an option to reduce the risk of complications such as root shield exposure,fracture,and displacement.Meanwhile,it should be taken into account to protect the periodontal ligament in the preparation process,and rounding treatments ought to be carried out on both sides and the lower edge of the root shield.

Interleukin-17 (IL-17) and its receptor family members are involved in a variety of pathophysiological processes.Studies have shown that the IL-17 family may be closely related to the occurrence and development of interstitial cystitis/ bladder pain syndrome (IC/BPS).This paper explores the relationship between the IL-17 family and IC/BPS, introduces the members and structures of the IL-17 family, their value in inflammatory diseases, and discusses in depth the IL-17 pathways in IC/BPS and the latest research progress.Research has found that the IL-17 family is upregulated in IC/BPS, related to the exacerbation of pathological inflammatory reactions, and responsible for maintaining the chronic inflammatory state of IC/BPS patients.In addition, IL-17 is also associated with neuroinflammation, pain, and other biological effects in IC/BPS.This review aims to deepen the understanding of the mechanisms underlying IC/BPS and to provide references for the development of new therapeutic strategies.

ObjectiveTo investigate the potential mechanism of Liangxue Tuizi Formula （凉血退紫方， LXTZF） in treating Henoch-Schönlein Purpura （HSP） by examining its regulatory effect on neutrophil extracellular trap （NETs） dysregulation via the rapidly accelerated fibrosarcoma kinase （RAF）/mitogen-activated protein kinase （MEK）/extracellular signal-regulated kinase （ERK） signaling pathway. MethodsSeventy Wistar rats were randomly allocated into a blank control group （n=14） and a modeling group （n=56）. Rats in the modelling group underwent an eight-week modelling period to establish HSP rat models with blood-heat syndrome via modified ovalbumin （OVA） induction method combined with oral administration of heat-property Chinese herbal medicine. Fifty successfully modeled rats were subsequently randomly divided into five groups （n=10 per group）， model group， compound glycyrrhizin group， LXTZF group， RAF inhibitor group， and LXTZF + RAF agonist group. Additionally， 10 rats were selected from the original blank control group for the final experiment. From the 11th week of modelling， rats in the blank control group and the model group received 1 ml/（100 g·d） ultrapure water via oral administration， in addition to 0.5 ml/（kg·d） 0.9% sodium chloride solution via intraperitoneal injection. The LXTZF group and the compound glycyrrhizin group received 7.5 g/（kg·d） LXTZF granule suspension via gavage， 13.5 mg/（kg·d） compound glycyrrhizin suspension via gavage， respectively. The RAF inhibitor group received 1 mg/（kg·d） GW5074 suspension via intraperitoneal injection and ultrapure water via oral administration； the LXTZF + RAF agonist group received 7.5 g/（kg·d） LXTZF granule suspension via gavage and 1 mg/（kg·d） paclitaxel suspension via intraperitoneal injection. All administrations were performed once daily for 4 weeks. After intervention， skin tissue histopathology was examined by hematoxylin and eosin （H&E） staining， immunoglobulin A （IgA） deposition was assessed via immunofluorescence， serum levels of neutrophil elastase （NE）， tumor necrosis factor-α （TNF-α）， and vascular cell adhesion molecule-1 （VCAM-1） were measured using enzyme-linked immunosorbent assay （ELISA）， serum myeloperoxidase （MPO） level was determined by a colorimetric assay； the mRNA expression levels of RAF， MEK， and ERK in skin tissue were detected by real-time quantitative polymerase chain reaction （RT-qPCR）； and the protein expression of RAF， MEK， ERK， as well as phosphorylated MEK （p-MEK） and phosphorylated ERK （p-ERK）， were analyzed by Western Blot. ResultsSkin tissue in the blank control group rats remained normal， whereas the model group exhibited neutrophil infiltration and haemorrhage with red blood cell rupture. In all drug intervention groups， neutrophil infiltration and haemorrhagic exudation reduced markedly， with LXTZF group demonstrating the most pronounced improvement. Compared with the blank control group， rats in the model group exhibited enhanced IgA fluorescence intensity in skin tissue， elevated serum levels of NE， MPO， TNF-α and VCAM-1， increased mRNA expression of RAF， MEK， ERK1 and ERK2， as well as heightened RAF protein levels and p-MEK/MEK and p-ERK/ERK ratios （P＜0.05）. Compared with the model group， the drug intervention groups exhibited reduced IgA fluorescence intensity in skin tissue， along with decreased serum levels of NE， MPO， TNF-α， and VCAM-1 （P＜0.05）. In LXTZF group and RAF inhibition groups， reduced mRNA expression of RAF， MEK， ERK1， and ERK2 was observed in rat skin tissue， alongside decreased RAF protein levels and reduced p-MEK/MEK and p-ERK/ERK ratios （P＜0.05）. Compared with LXTZF + RAF agonist group， the compound glycyrrhizin group， LXTZF group， and RAF inhibitior group exhibited reduced IgA fluorescence intensity in skin tissue， decreased serum NE， MPO， TNF-α， and VCAM-1 levels， and decreased MEK mRNA expression and p-MEK/MEK ratio （P＜0.05）. ConclusionThe potential mechanism by which LXTZF treats Henoch-Schönlein purpura with blood heat syndrome may involve blocking the RAF/MEK/ERK signaling pathway in skin tissue， and suppressing excessive formation of NETs， thereby reducing IgA deposition in dermal microvessels and attenuating systemic inflammatory responses.

ObjectiveTo investigate the correlation between the color， odor and volatile components of Paeoniae Radix Alba（PRA） and its processed products， and to examine the effects of different processing methods on the odor and color formation of PRA. MethodThe odor and chromaticity information of PRA， honey chaff-fried PRA and honey bran-fried PRA were identified by electronic nose and colorimeter， and the volatile components in the different processed products of PRA were identified and relatively quantified by headspace gas chromatography-mass spectrometry（HS-GC-MS）， and analyzed using principal component analysis（PCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA）， then the differential key flavor components among the three were screened according to the principles of variable importance in the projection（VIP） value>1 and relative odor activity value（ROAV）≥1. Pearson correlation analysis was used to investigate the association between the differential flavor components and the colorimetric values and electronic nose sensors， respectively. ResultAfter being fried with honey chaff and honey bran， the lightness value（L^*） of PRA decreased， and red-green value（a^*） and yellow-blue value（b^*） increased significantly（P<0.05， P<0.01）. The odor differences were mainly reflected in the S1， S2， S4， S5， S6， S8 and S11 sensors， and the results of PCA of the electronic nose indicated that the odor differences among PRA， honey chaff-fried PRA and honey bran-fried PRA were obvious， among which the overall odor intensity of honey bran-fried PRA was higher than that of honey chaff-fried PRA. A total of 47 volatile components were identified from PRA and its processed products， including 21 for PRA， 36 for honey chaff-fried PRA， and 37 for honey bran-fried PRA. Odor analysis revealed that 12， 24 and 22 volatile components may be the key flavor components in PRA， honey chaff-fried PRA and honey bran-fried PRA， respectively. Correlation analysis showed that the L^* of the decoction pieces was negatively correlated with the content of the Maillard reaction products， the a^* and b^* were positively correlated with the content of the Maillard reaction products， the S1 and S8 sensors were negatively correlated with the content of the Maillard reaction products， and the S2， S4， S5， S6 and S11 sensors were positively correlated with the Maillard reaction products. ConclusionThe color of PRA is deepened after being stir-fried with honey chaff and honey bran， and 5-hydroxymethylfurfural， furfural and other components are generated at the same time， which is in line with the theory of burning aroma strengthens the spleen of stir-fried with honey chaff and honey bran. Honey bran-fried PRA has a stronger Maillard reaction than honey chaff-fried PRA， which makes honey bran-fried PRA with a burnt flavor and a dark yellow color， while honey chaff-fried PRA has a sweet flavor and a bright yellow color.

OBJECTIVE To provide reference for basic analysis of the pharmacodynamic substance in Stahlianthus involucratus. METHODS Overall 24 SD male rats were randomly divided into blank group （purified water）， and administration group （ethanol extract of S. involucratus， 15.75 g/kg， calculated by crude drug）， with 12 rats in each group. They were given drug liquid/purified water intragastrically， twice a day， every 6-8 h， for consecutive 3 days. After medication， the blood， urine and fecal samples were collected from two groups of rats. UPLC-Q-Exactive-MS technology was used to identify the chemical constituents in the ethanol extract of S. involucratus， and metabolites in the blood， urine and fecal of rats after intragastrical administration of the ethanol extract of S. involucratus. Multivariate statistical analysis was employed to screen various serum metabolites. Metabolic pathways were analyzed by MetaboAnalyst 5.0 platform. RESULTS A total of 38 chemical constituents were identified from the ethanol extract of S. involucratus， including fourteen prototype components and three metabolites identified from 5 urine samples， nine prototype components identified from fecal samples， and ten prototype components and one metabolite identified from serum samples. A total of 71 differential metabolites were screened from two groups of rat serum samples， of which 44 differential metabolites， such as ferulic acid， glycyrrhizin， were up-regulated and 27 differential metabolites， such as arachidonic acid， phenylacetylglutamine， were down-regulated. The 71 differential metabolites were mainly enriched in 11 metabolic pathways， including phenylalanine metabolism， linoleic acid metabolism， arachidonic acid metabolism， and tryptophan metabolism. CONCLUSIONS Ferulic acid， liquiritigenin， isofraxidin and formononetin may be the material basis that directly exert pharmacological effects of S. involucratus. S. involucratus may exert anti-inflammatory effects by affecting metabolic pathways， including arachidonic acid metabolism and tryptophan metabolism.

Liver regeneration following injury aids the restoration of liver mass and the recovery of liver function. In the present study we investigated the contribution of megakaryocytic leukemia 1 (MKL1), a transcriptional modulator, to liver regeneration. We report that both MKL1 expression and its nuclear translocation correlated with hepatocyte proliferation in cell and animal models of liver regeneration and in liver failure patients. Mice with MKL1 deletion exhibited defective regenerative response in the liver. Transcriptomic analysis revealed that MKL1 interacted with E2F1 to program pro-regenerative transcription. MAPKAPK2 mediated phosphorylation primed MKL1 for its interaction with E2F1. Of interest, phospholipase d2 promoted MKL1 nuclear accumulation and liver regeneration by catalyzing production of phosphatidic acid (PA). PA administration stimulated hepatocyte proliferation and enhanced survival in a MKL1-dependent manner in a pre-clinical model of liver failure. Finally, PA levels was detected to be positively correlated with expression of pro-regenerative genes and inversely correlated with liver injury in liver failure patients. In conclusion, our data reveal a novel mechanism whereby MKL1 contributes to liver regeneration. Screening for small-molecule compounds boosting MKL1 activity may be considered as a reasonable approach to treat acute liver failure.